Sylvania CRT Television SST4272 User Manual

SYLVANIA  
LIMITED WARRANTY  
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workman-  
ship as follows:  
Owner’s  
Manual  
27 INCH  
COLOR TELEVISION  
DURATION:  
PARTS:  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from  
the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded  
from this warranty.  
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date  
of original retail purchase.  
LABOR:  
SST4272  
LIMITS AND EXCLUSIONS:  
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail pur-  
chase will be required together with the product to obtain service under this warranty.  
FEATURES  
This warranty shall not be extended to any other person or transferee.  
Tinted, Bright Black Matrix Picture Tube  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or  
if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any  
the product not purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does  
not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup-  
plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter-  
ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or  
damage which results from fire, flood, lightning or other acts of God.  
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.  
PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-  
ing system provides free and easy channel selection, and lets you tune directly to any channel  
using the channel number buttons (0~9 and +100-key) on the remote control.  
On-Screen Function Display.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE  
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
Full-Function Remote Control  
Sleep Timer  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY  
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE  
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF  
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-  
NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-  
TIVES IN THE UNITED STATES.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY FUNAI AUTHORIZED SER-  
VICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED  
SERVICE FACILITY.  
Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,  
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.  
Auto Shut Off Function- If there is no air signal input from the antenna terminal and no  
user operation for 15 minutes, the TV will turn itself off automatically.  
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.  
PRECAUTIONS  
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.  
IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS  
COSTS WILL BE CHARGED.  
Place your TV in a room with adequate ventilation.  
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.  
Do not place your TV on soft surfaces, such as rugs or blankets.  
Leave enough room for air to circulate around the bottom, top and back of the set.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT  
VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO  
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.  
ATTENTION:  
The serial number of this product may be found on the back of the TV. No others have the same  
serial number as yours. You should record the number and other vital information here and retain  
this book as a permanent record of your purchase to aid identification in case of theft.  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT  
WITHOUT PRIOR NOTICE.  
To locate your nearest SYLVANIA Authorized Service Center or general service procedure,  
please call 1-800-968-3429 or write to the following:  
Date of Purchase  
Dealer Purchase from  
Dealer Address  
Dealer Phone No.  
Model No.  
Serial No.  
FUNAI CORPORATION  
Customer Service  
100 North Street; Teterboro, NJ 07608  
This Owner’s Manual is made of recycled paper.  
Tel :1-800-968-3429  
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.  
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING  
AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE  
1-800-968-3429.  
0EMN01944  
Printed in Malaysia  
L6201UB * * * * *  
ANTENNA/CABLE CONNECTIONS  
UHF/VHF Rod  
*Some cable TV systems use scram-  
bled signals and require a special con-  
verter to receive these channels.  
Antenna  
CAUTION: TO PREVENT ELECTRIC  
SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT, FULLY INSERT.  
(Not supplied)  
Consult your local cable company.  
VHF  
Antenna  
(Not supplied)  
CATV Box *  
FCC WARNING- This equip-  
ment may generate or use radio  
frequency energy. Changes or  
modifications to this equipment  
may cause harmful interference  
unless the modifications are  
expressly approved in the  
instruction manual. The user  
could lose the authority to oper-  
ate this equipment if an unau-  
thorized change or modification  
is made.  
or Satellite Box  
(Not supplied)  
UHF  
Antenna  
(Not supplied)  
ANT.IN  
OUT  
IN  
From Cable System  
or Satellite Antenna  
75-ohm  
Coaxial Cable  
75-ohm  
Coaxial Cable  
ANT. IN  
OR  
OR  
From Cable System  
VHF/UHF Combiner  
(Not supplied)  
Note to CATV system installer:  
AV input (stereo)  
This reminder is provided to call the CATV system installer's attention to Article 820-  
40 of the NEC that provides guidelines for proper grounding and, in particular, speci-  
fies that the cable ground shall be connected to the grounding system of the building  
as close to the point of cable entry as practical.  
VHF/UHF  
Combination Antenna  
(Not supplied)  
CLOSED CAPTION  
This TV can receive C1 and C2 Caption and Text.  
Notes:  
(1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a  
VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or  
text.  
(2)Captions and texts may not match the TV voice exactly.  
(3)Interference may cause the closed caption system not to function properly.  
(4)The caption or text characters will not be displayed while the menu display or functions dis-  
play is shown.  
Caption Mode  
(1)Closed Caption Characters can be displayed on the TV screen only when the received broad-  
cast signal contains Caption Signals.  
(2)Paint-on mode: Displays input characters on the screen immediately.  
Pop-on mode: Once characters are stored in memory, they are displayed all at once.  
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)  
Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters  
will not be displayed.  
(5)If you see this screen:  
Text Mode  
(1)Displays the text on the screen by scrolling (max. 7 lines)  
(2)If the received broadcast signal does not contain caption or text signals, no change will occur.  
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To  
clear screen, select CAPTION C1, C2 or CAPTION [OFF].  
 
PREPARATION FOR USE  
PICTURE  
[ADD/DELETE FUNCTION]  
1) Press the MENU button so that the menu display appears on the TV  
screen.  
2) Press the CH(annel) or button to point to "CHANNEL SET".  
Then, press the VOL(ume) button.  
3) Press the VOL(ume) button so that "ADD/DELETE" is selected.  
4) Use the CH(annel) or button to select the channel you wish to put  
into memory or to erase from memory.  
LANGUAGE SELECTION  
If you want to change the language of the on-screen menu, follow the proce-  
dure below.  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
PICTURE  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
1) Connect the power cord to a standard AC outlet.  
Note: If some digits appear in the corner of the screen,  
press the POWER button without unplugging the power cord.  
2) Press the POWER button to turn on the TV.  
3) Press the MENU button so that the menu display appears  
on the TV screen.  
4) Press the CH(annel) or button to point to "[ENGLISH]".  
5) Select "ENGLISH" or "ESPAÑOL" = Spanish by using  
the VOL(ume) or button.  
ADD/DELETE  
AUTO MEMO  
STEREO  
[ON]  
Note: The display will return to the normal screen automatically in about  
10 seconds.  
PICTURE  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
Perform "ADD/DELETE" function while this display appears on the screen.  
Press the VOL(ume) or button to light up the channel number  
in LIGHT BLUE if you wish to add the channel into memory.  
Press the VOL(ume) or button to light up the channel number  
6) Press the MENU button to exit the menu.  
in LIGHT RED if you wish to erase the channel from memory.  
5) Press the MENU button to exit the menu.  
CHANNEL PRESETTING  
NOTE:You MUST PRESET channels BEFORE using CHANNEL or button.  
To preset a channel or to change a preset channel, follow the procedure below.  
1) Press the POWER button to turn on the TV.  
STEREO SOUND SYSTEM  
PICTURE  
2) Press the MENU button so that the menu display appears  
on the TV screen.  
3) Press the CH(annel) or button to point to "CHANNEL SET".  
Then, press the VOL(ume) button.  
This function suppresses noise, restores the dynamic range and electronically  
expends the stereo signal to create a more specious sound effect.  
1) Press the MENU button so that the menu display appears on the TV  
screen.  
CHANNEL SET  
PICTURE  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
4) Press the CH(annel) or button to point to "AUTO MEMO".  
Then, press the VOL(ume) button.  
2) Press the CH(annel) or button to point to "CHANNEL SET".  
Then, press the VOL(ume) button.  
3) Press the CH(annel) or button so that "STEREO" is selected.  
4) Press the VOL(ume) or button to select the stereo mode on or off.  
Stereo sound is effective when "STEREO" is on.  
ADD/DELETE  
AUTO MEMO  
PICTURE  
The tuner scans and memorizes all active channels in your area.  
The TV distinguishes between standard TV channels and cable (CATV)  
STEREO  
[ON]  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
channels.  
When AUTO MEMO action is completed, the lowest memorized channel reappears on the  
screen.  
When you press the CH(annel) or button after selecting AUTO MEMO,  
the tuner will stop at the memorized channels only.  
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If  
this happens, try the AUTO MEMO action again when reception conditions are better.  
ADD/DELETE  
AUTO MEMO  
ADD/DELETE  
AUTO MEMO  
STEREO  
[OFF]  
STEREO  
[ON]  
RESUME FUNCTION  
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-  
ly when the power resumes.  
OPERATIONS  
GAME MODE  
automatically after about 10 seconds if you  
do not press any buttons. Press the MENU  
and VOL(ume) button so that "PIC-  
TURE" is selected. Then, press the  
WATCHING A TV PROGRAM  
1) Press the POWER button to turn on the TV.  
2) Select the desired channel with the CH(annel) or button.  
3) Adjust the volume to the desired listening level using the VOL(ume) or button.  
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)  
Set to the most suitable position for TV  
GAME.  
[+] : ON [-] : OFF  
CH(annel) or button repeatedly until  
the display returns to the screen.  
BRIGHT  
Adjust until the darkest parts of the picture are  
as bright as you prefer.  
If you adjust any picture control after you  
set the Game mode to [ON], the Game mode  
is set to [OFF] automatically.  
[+] : increase brightness [-] : decrease brightness  
SETTING THE SLEEP TIMER  
CONTRAST  
Adjust to increase or decrease contrast.  
[USING THE GAME BUTTON]  
The sleep timer function allows you to have the power automatically turn off  
after a set time period.  
1) Press the POWER button to turn on the TV and press the SLEEP button  
on the remote control .  
2) You may change the sleep time by pressing the SLEEP  
button on the remote control repeatedly. The timer can be  
[+] : increase contrast [-] : decrease contrast  
You may also set the Game mode and external  
input mode at the same time by pressing the  
GAME button on the remote control. “GAME”  
appears on the TV screen.  
COLOR  
Adjust to be brilliant or pale color.  
[+] : be brilliant color [-] : be pale color  
To exit the Game mode and external input  
TINT  
SLEEP 10  
mode, press the GAME button on the remote  
control again.  
Adjust to obtain natural skin tones.  
[+] : greenish tone [-] : reddish tone  
set up to 90 minutes, 10 minutes each time the SLEEP  
button is pushed. (The timer display counts up and sleep  
To cancel the Game mode only, adjust the  
To cancel the sleep timer:  
Press the SLEEP button repeated-  
picture control. In this case, “VIDEO” instead  
of “GAME” appears on the TV screen.  
Notes:  
“+” is achieved by pressing the VOL(ume)  
timer will be displayed on the screen when you press the  
ly until "SLEEP 0" is displayed.  
If you press the GAME button when the TV  
button and “-” by pressing the VOL(ume)  
SLEEP button on remote control.)  
is off, the TV turns on and will be in the  
Game mode and external input mode auto-  
matically.  
button.  
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the  
sleep time will be lost.  
In the above steps, the picture adjustment  
display will disappear from the TV screen  
CLOSED CAPTION SELECTION  
: Press the CH(annel) or button.  
You may view specially labeled (cc) TV pro-  
grams, movies, news, prerecorded tapes, etc.  
with either a dialogue caption or text display  
added to the program.  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) or button to point  
to "CAPTION".  
[-]  
OFF  
[+]  
ON  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
GAME MODE  
BRIGHT  
CONTRAST  
COLOR  
TINT  
3) Press the VOL(ume) or button to select  
the mode you wish.  
4) When done, press the MENU button to exit  
the menu.  
: Press the VOL(ume) or button.  
V-CHIP SET UP  
V-CHIP enables parents to prevent their chil-  
dren from watching inappropriate material on  
TV.  
V-CHIP reads the ratings for programming  
(except for news and sports programs, unedited  
movies on premium cable channels, and  
Emergency Broadcast System signals), then  
denies access to programming if the program's  
rating meets or exceeds the limitations you  
select. In this  
To block certain ratings, follow the steps  
below.  
PICTURE  
PICTURE  
PICTURE  
PICTURE  
PICTURE  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [OFF]  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [ C1]  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [ C2]  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [ T1]  
CHANNEL SET  
[ENGLISH]ESPAÑOL  
V-CHIP SET UP  
CAPTION [ T2]  
Programming may be rated by the Motion  
Picture Association of America (MPAA) or  
according to the Television Parental  
Guidelines. In order to block any inappropri-  
ate programming, set your limits in both  
places (MPAA RATING and TV RATING).  
You cannot access the menu when the "PRO-  
TECTED PROGRAM by ..." message  
appears. In this case, change to an unblocked  
channel, then press the MENU button.  
PICTURE ADJUSTMENT  
1) Press the MENU button so that the menu display appears on the TV screen.  
2) Press the VOL(ume) button so that "PICTURE" is selected.  
3) Select the feature you wish to adjust with the CH(annel) or button and adjust it with the  
case, "PROTECTED PROGRAM by ..." mes-  
sage appears on the TV screen.  
VOL(ume) or button.  
 
OPERATIONS (Continued)  
[MPAA RATING SET UP]  
[TV RATING SET UP]  
When you select TV-Y7, TV-PG, TV-14, or  
TV-MA and you press the VOL(ume) but-  
ton, the sub-ratings will appear on the TV  
screen.  
If you select the rating category (example: TV-  
PG) and turn it to [BLOCK] or [VIEW], the  
sub-ratings (example: V for Violence) will turn  
[BLOCK] or [VIEW] automatically.  
Note: When you select [TV-MA], "D" does  
not appear on the TV screen.  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) ▲  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) ▲  
or button to point to  
"V-CHIP SET UP".  
Then, press the  
The sub-ratings which set to [BLOCK]  
appear next to the rating category in the TV  
RATING menu.  
or button to point to  
"V-CHIP SET UP".  
Then, press the  
PICTURE  
CHANNEL SET  
[ENGLISH]  
PICTURE  
CHANNEL SET  
[ENGLISH]  
B V-CHIP SET UP  
CAPTION  
5) Press the MENU button to exit the menu.  
ESPAÑOL  
ESPAÑOL  
B V-CHIP SET UP  
CAPTION  
[OFF]  
[OFF]  
VOL(ume) button.  
3) Press the CH(annel) ▲  
or button to point to  
"MPAA RATING".  
Then, press the  
VOL(ume) button.  
4) Press the CH(annel) ▲  
or button to point to  
your desired item.  
VOL(ume) button.  
3) Press the CH(annel) ▲  
or button to point to  
"TV RATING".  
You can set the sub-ratings to [BLOCK] or  
[VIEW] individually when the rating category  
is set to [BLOCK]. To set the sub-ratings indi-  
vidually, follow the steps below.  
TV RATING  
B MPAA RATING  
CHANGE CODE  
B TV RATING  
MPAA RATING  
CHANGE CODE  
When you select [TV-Y7]:  
Then, press the  
Press the CH(annel) or button to select  
"FV" (Fantasy Violence). Then, press the  
VOL(ume) button to select [BLOCK] or  
[VIEW].  
VOL(ume) button.  
4) Press the CH(annel) ▲  
or button to point to  
your desired  
item.Then, press the  
VOL(ume) button to  
B G  
PG  
PG-13  
R
NC-17  
X
[VIEW]  
B TV-Y  
TV-Y7(  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
)
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
TV-G  
TV-PG(  
TV-14(  
TV-MA(  
)
)
)
Then, press the  
VOL(ume) button  
to select [BLOCK] or [VIEW].  
TV-Y7  
FV  
[BLOCK]  
[BLOCK]  
select [BLOCK] or [VIEW].  
<Selection>  
<Rating Category  
<Selection>  
Explanations>  
• TV-Y:  
<Rating Category  
Explanations>  
• G:  
• PG:  
General Audience  
Parental Guidance suggested.  
Appropriate for all children  
Appropriate for children seven and  
older  
When you select [TV-PG], [TV-14] or [TV-MA]:  
Press the CH(annel) or button to select  
"D" (Suggestive Dialog), "L"(Coarse  
Language), "S"(Sexual Situation), or "V"  
(Violence).  
• TV-Y7:  
• PG-13: Unsuitable for children under 13  
• R:  
Restricted; under 17 requires accompany  
ing parent or adult guardian  
• TV-G:  
General Audience  
• TV-PG:  
• TV-14:  
• TV-MA:  
Parental Guidance suggested.  
Unsuitable for children under 14  
Mature audience only  
• NC-17: No one under 17 admitted  
• X: Mature audience only  
TV-PG  
[BLOCK]  
D
L
S
V
[BLOCK]  
[BLOCK]  
[BLOCK]  
[BLOCK]  
When you select the rating category and turn  
it to [BLOCK], the higher rating will turn  
[BLOCK] automatically. Also, the lower rat-  
ing will turn [VIEW] automatically.  
When you select the rating category and turn  
it to [BLOCK], the higher rating will turn  
[BLOCK] automatically. Also, the lower rat-  
ing will turn [VIEW] automatically.  
When you turn "G" to [BLOCK] or [VIEW],  
the all ratings will turn to [BLOCK] or  
[VIEW] automatically.  
When you turn "X" to [VIEW], then all rat-  
ings will turn to [VIEW] automatically.  
When you turn "TV-Y" to [BLOCK] or  
[VIEW], then all ratings will turn to  
[BLOCK] or [VIEW] automatically.  
When you turn "TV-MA" to [VIEW], then  
all ratings will turn to [VIEW] automatically  
Then, press the VOL(ume) button to  
select [BLOCK] or [VIEW].  
TV-Y  
TV-Y7 (  
TV-G  
[VIEW]  
)[VIEW]  
[BLOCK]  
5) Press the MENU button to exit the menu.  
TV-PG (DLSV)[BLOCK]  
TV-14 (DLSV)[BLOCK]  
TV-MA ( LSV)[BLOCK]  
TROUBLESHOOTING GUIDE  
MAINTENANCE  
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-  
looked possibilities. Before arranging for service, check these items. It could save you time and money.  
CABINET CLEANING  
PICTURE TUBE CLEANING  
Wipe the front panel and other exterior sur-  
Wipe the picture tube of the TV with a soft  
cloth. Before cleaning the picture tube, discon-  
nect the power cord.  
faces of the TV with a soft cloth immersed  
in lukewarm water and wrung dry.  
Never use a solvent or alcohol. Do not spray  
insecticide liquid near the TV. Such chemi-  
cals may cause damage and discoloration to  
the exposed surfaces.  
QUICK SERVICE CHECK LIST  
POSSIBLE REMEDY  
SUPPLIED ACCESSORIES  
Try a new channel, if OK, then possible station trouble.  
Owner’s Manual  
Remote control unit  
(N0132UD)  
Is TV plugged in?  
Power at outlet?  
Is TV’s POWER button on?  
Is antenna connected to terminal on the back of the set?  
If outside antenna is being used, check for broken wire.  
Check for local interference.  
Batteries ("AA" x 2)  
Turn off with POWER button and then turn it on after about a minute.  
Adjust COLOR control.  
SPECIFICATIONS  
Sound output:  
1W, 8 ohm x2  
Adjust CONTRAST & BRIGHT control.  
Check batteries in Remote Control.  
GENERAL SPECIFICATIONS  
OTHER SPECIFICATIONS  
Television system:  
NTSC-M  
TV Standard  
Closed Caption Problem  
Possible Remedy  
Remote control:  
Digital encoded  
My TV is showing captions that are  
misspelled.  
You are watching a live broadcast and spelling errors made by the  
closed captioning production company may pass through uncorrect-  
ed. A prerecorded program will not show any misspelled words  
because of the normal time available for editing the captions.  
infrared light system  
Closed Caption  
System:  
Operating  
temperature:  
§15.119/FCC  
5°C to 40°C  
(41°F~104°F)  
Channel coverage  
VHF:  
2 ~ 13  
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue  
Power requirements: AC120V, 60Hz  
Power consumption  
UHF:  
14 ~ 69  
or there is a delay of what is being said.  
are common for live broadcasts. Most captioning production compa-  
nies can display a dialogue to a maximum of 220 words per minute.  
If a dialogue exceeds that rate, selective editing is used to insure that  
the captions remain up-to-date with the current TV screen dialogue.  
CATV:  
2 ~ 13, A ~ W,  
W+1 ~ W+84,  
A-5 ~ A-1, 5A  
181 channel  
frequency synthesized  
tuning system  
Direct access keyboard,  
programmable  
scan and up/down  
(Maximum):  
Picture tube:  
Dimensions:  
110W  
27"  
H : 22-1/16” (560mm)  
W: 26” (660mm)  
D : 19-11/16” (500mm)  
77.2 lbs. (35kg)  
Tuning System  
Channel access:  
My captions are scrambled with white  
boxes on the TV screen.  
Interference caused by building, power lines, thunderstorms, etc.  
may cause scrambled or incomplete captions to appear.  
Weight:  
My program guide listed a TV show as  
being closed captioned  
but none of the captions were displayed.  
Broadcasters may at times use a time compression process to the  
actual program so that additional advertising time can be given.  
Since the decoder cannot read the compressed information, captions  
will be lost.  
•Designs and specifications are subject to  
change without notice and without our  
legal obligation.  
•If there is a discrepancy between languages,  
the default language will be English.  
Terminals  
Antenna input:  
VHF/UHF/CATV  
75 ohm unbalanced  
(F-type)  
My prerecorded videotape does not show  
any captions. The tape box mentions it  
being closed captioned.  
The videotape was either an illegal copying or the tape duplicating  
company accidentally left out the captioning signals during the  
copying process.  
Video input:  
Audio input:  
RCA connector x 2  
(1 x Front / 1 x Rear)  
RCA connector x 4  
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION  
channels. [OFF].  
(2 (L/R) x Front / 2 (L/R) x Rear)  
Stereo Sound System  
2 speakers  
As an ENERGY STAR® Partner, our company has determined that this product meets  
the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.  
Download from Www.Somanuals.com. AllEMLanEuCalsTSReIaCrcAh ALndSDPoEwCnlIoFadI.CATIONS  

Sennheiser Microphone E608 User Manual
Snapper Chipper 5 14 SERIES User Manual
Sony Computer Drive USM16GL User Manual
Sony Ericsson Cell Phone J132 User Manual
Sony Microcassette Recorder TCS 100DV User Manual
Summit Offroad Vehicle 84015 User Manual
Sunbeam Coffeemaker HTM1 User Manual
Sunbeam Toaster 6198 33 User Manual
SVA Security Camera CDR 1202 User Manual
Tannoy Cell Phone W715 User Manual