Huffy Table Top Game 211011 User Manual

A DIVISION OF RUSSELL CORPORATION  
Table Soccer Game  
Owners Manual  
Customer Service Center  
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.  
PLEASE DO NOT CALL Snap-on TOOLS FOR REPLACEMENT OR MISSING PARTS.  
Toll-Free Customer Service Number for U.S: 1-800-558-5234  
For Canada: 1-800-284-8339  
For Europe: 00 800 555 85234 (Sweden: 009 555 85234)  
For Australia: 1-800-333 061  
WARNING!  
READ AND UNDERSTAND  
OPERATOR'S MANUAL  
BEFORE USING THIS UNIT.  
FAILURE TO FOLLOW  
OPERATING  
INSTRUCTIONS COULD  
RESULT IN INJURY OR  
DAMAGE TO PROPERTY.  
1
10/04  
P/N 211011  
© COPYRIGHT 2004 by HUFFY SPORTS  
 
23  
1.  
22  
21  
A. Attach a side panel (22) to the end panel (23) by  
using leg bolt (4) and leg washer (5).  
5
4
20  
B. Slide the plastic rod washer (21) and rod bushing  
(20) onto each end of the player rods.  
21  
20  
C. Follow the diagram and insert the player rods  
(14, 15, 16, 17, 18, & 19) through the designated  
holes in the side panel (22).  
IMPORTANT: Make sure the small hole in the  
end of the rods (17, 18, and 19) are through the  
side panel  
23  
22  
21  
20  
4
5
22  
D. Slide the other ends of the player rods through  
the other side panel (22) and attach to the end  
panel (23) using the leg bolt (#4) and leg washer  
(#5).  
3
10/04  
P/N 211011  
 
23  
2.  
22  
A. Slide the playfield (25) UPSIDE DOWN into the grooves in  
the side (22) and end (23) panels as shown.  
25  
B. Affix the other end panel (23) to the side panels (22) using  
leg bolt (4) and leg washer (5).  
IMPORTANT: Make sure the playfield is resting in the  
grooves in ALL panels.  
Secure the playfield by placing the playfield support braces  
(24) onto the playfield. Place the barrel nut (8) into the  
support brace and insert the 3/16" bolt (6) and 3/16" washer  
(7) through the side panel (22) and into the barrel nut.  
22  
24  
23  
24  
4
5
8
7
6
23  
2
C. Affix the plastic ball catcher (28) to the side panel (22) with  
the 1/2" round head screw (2).  
2
Affix the plastic goal box (27) to the end panel with the 1/2"  
round head screw (2).  
28  
27  
Connect the plastic ball catcher and plastic goal box with the  
ball runner (29).  
29  
* Repeat for opposite corner  
4
P/N 211011  
10/04  
 
A. Attach the legs (26) to the side (22) and end (23) panels with the leg bolt (4) and leg washer  
3.  
(5). Screw the 3/4" round head screw (3) into the playfield in the pre-drilled holes near the goal.  
B. Screw the leg levelers (32) into the bottom of the legs.  
32  
26  
3
3
23  
22  
22  
23  
4
5
5
10/04  
P/N 211011  
 
A. CAREFULLY flip the table over. Attach the drink holders (31) to the end panels (23) with 1/2"  
4.  
round-head screw (2).  
B. Attach the slide scorer (10) to the top rail of both end panels by inserting the 1/8" flat-head  
screw (1) through the pre-drilled holes.  
C. Slide the handles (13) onto the ends of the player rods with the small holes in the end. Slide  
the rod caps (12) onto the player rods opposite the handles.  
D. Insert the ball entry cups (30) into the circular holes in the side panel (22) and secure with  
the 1/2" round-head screw (2).  
13  
1
10  
12  
23  
10  
2
2
30  
22  
31  
6
P/N 211011  
10/04  
 

Haier Washer XQJ100 96 User Manual
Hamilton Beach Oven 840104300 User Manual
Hamilton Beach Slow Cooker 33260 User Manual
HandHeld Entertainment Scanner Quick Check 890 User Manual
HANNspree Flat Panel Television ST43 15A1 User Manual
Harbor Freight Tools Air Compressor 92699 User Manual
Hasbro Games Talking Phone User Manual
Hasselblad Digital Camera 70380534 User Manual
Honeywell Carbon Monoxide Alarm 19546GM1 User Manual
HP Hewlett Packard Digital Camera M407xi User Manual