Haier Washer XQJ100 96 User Manual

XQJ100-96  
Automatic Washing Machine  
Contents  
Before using  
Names of the parts...........the 2nd cover  
Safety precautions .............................1  
Installation and adjustment ................3  
Installation the water inlet hose..........4  
Temperature & hardness of water ......5  
Wash cycle and sound........................6  
Using process  
Preparation before washing ..............7  
Put in the laundries ............................8  
Put in the detergent ............................9  
Close the top lid .................................9  
Select water level..............................10  
Select temperature............................10  
Select program..................................10  
Finish washing ..................................11  
Disposal after washing ......................11  
Trouble shooting  
*Answer to question....................12  
Packing list ..................................13  
After-sales service.......................13  
Specification.............the back cover  
Please read this manual carefully before using.  
Please retain it attentively for future reference.  
 
Safety precautions  
Read all instructions in the manual before using the washer.  
The washer must be grounded. In the event of a malfunction or breakdown, grounding will  
reduce the risk of electrical shock by providing a path of least resistance for electric current.  
The plug must be plugged into an appropriate outlet that is properly installed and grounded  
in accordance with all local codes and ordinances.  
WARNING:  
1. Improper connection of the equipment-grounding conductor can result in a risk of electric  
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether  
the appliance is propel grounded.  
2. Do not modify the plug provided with the appliance if it will not fit the outlet, have a proper  
outlet installed by a qualified electrician.  
3. Do not repair or replace any part of the washer or attempt any serving unless specifically  
recommended in this use and care guide or in published user-repair instructions that you  
understand and have the skills to carry out .  
4. Be sure to pull the plug off when the machine is idle or  
when cleaning the machine.  
5. Do not use an extension cord.  
Do not put the machine at damp place like  
the bathroom. Never wash it with water.  
Do not install or store the washer where  
it will be exposed to the weather.  
Do not wash water-proof laundries like  
the raincoat, bike covers etc. to avoid  
abnormal vibrations in spinning.  
Do not let the machine share one receptacle  
with other electric appliances. If the power  
plug is damaged, or the plugging into the  
receptacle is loose, do not use the plug any  
more.  
 
Safety precautions  
IMPORTANT SAFETY INSTRUCTIONS  
WARNING -To reduce the risk of fire, electric shock, or injury to persons when using your appliance,  
follow basic precautions, including the following:  
1) Read all instructions before using the appliance.  
2) Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with  
gasoline, dry-cleaning solvents, other flammable, or explosive substances as they give off vapors that  
could ignite or explode.  
3) Do not add gasoline, dry-cleaning solvents, or other flammable, or explosive substances to the wash  
water. These substances give off vapors that could ignite or explode.  
4) Under certain conditions, hydrogen gas may be produced in a hot water system that has not been  
used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water has not been used for  
such a period, before using the washing machine, turn on all hot faucets and let the water flow from  
each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable,  
do not smoke or use an open flame during this time.  
5) Do not allow children to play on or in the appliance. Close supervision of children is necessary when  
the appliance is used near children.  
6) Before the appliance is removed from service or discarded, remove the door.  
7) Do not reach into the appliance if the tub or agitator is moving.  
8) Do not install or store the washer where it will be exposed to the weather.  
9) Do not tamper with controls.  
10) Do not repair or replace any part of the washer or attempt any serving unless specifically  
recommended in this use and care guide or in published user-repair instructions that you understand  
and have the skills to carry out .  
SAVE THESE INSTRUCTIONS  
GROUNDING INSTRUCTIONS  
For a grounded, cord-connected appliance:  
The washer must be grounded. In the event of a malfunction or breakdown, grounding will reduce  
the risk of electrical shock by providing a path of least resistance for electric current. The plug must  
be plugged into an appropriate outlet that is properly installed and grounded in accordance with all  
local codes and ordinances.  
WARNING: Improper connection of the equipment-grounding conductor can result in a risk of  
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether  
the appliance is propel grounded.  
Do not modify the plug provided with the appliance if it will not fit the outlet, have a proper outlet  
installed by a qualified electrician.  
 
Before Using  
Safety precautions  
Read all instructions in the manual before using the washer.  
Do not put the machine at damp place like  
the bathroom. Never wash it with water.  
Do not let the machine share one receptacle  
with other electric appliances. If the power  
plug is damaged, or the plugging into the  
receptacle is loose, do not use the plug any  
more.  
Do not stretch hands into the working  
machine. It is dangerous even if the  
rotation is slow. Take special care of  
the children.  
Do not wash water-proof laundries like  
the raincoat, bike covers etc. to avoid  
abnormal vibrations in spinning.  
Do not decompose, repair or alter the  
machine by yourself.  
Do not put any hot or heavy items (such  
as the kettle with hot water ) on the  
washing machine.  
The handicapped or children without  
care shall not use the machine.  
Keep the machine away from direct  
sunlight and heat source like the heater.  
 
Installation and adjustment  
Please install and adjust the machine according to the requirement of the manual. It is  
very important to your security and correct operating the machine.  
Adjust the installation position  
The largest allowed slope of the base of the machine is 2 . The slanting or rough  
ground will result in unstable running or stoppage of the machine. Please adjust  
it with following methods:  
Adjust the adjustable foot:  
Confirm it's horizontal:  
Hang the lead line to confirm  
if it is horizontal.  
1.To twist the adjustable foot, please first lift up  
the side of the foot slightly, and twist the foot.  
2.Fasten the nut after adjustment.  
Adjustable foot  
High  
Low  
Install the drain hose  
Outer drain hose  
component  
First install the drain hose hook on the parts of  
outer drain hose component.  
Drain hose hook  
Put the drain hose clamp on the outer drain hose,  
insert the outer drain hose into the joint for it, and  
then clutch tightly with drain hose clamp.  
Drain hose clamp  
Drain hose joint  
Usage of the drain hose  
Hang the outer drain hose on the proper place  
before washing( do not use it toppled down  
on the ground).  
Attend that the outlet of drain hose shall be higher  
than the water level in washtub to avoid siphon  
phenomenon.  
 
Install the water inlet hose  
Connect the Water Inlet Hoses  
1. Insert a new flat washer into each end of the inlet hoses. Firmly seat the washers  
in the coupling. ( As figure 1)  
Figure 1  
2. Respectively attach the water inlet hoses to the hot water faucet and the cold water  
faucet. Using pliers, tighten the coupling . ( As figure 2)  
NOTE: Do not overtighten. Damage to the valves can result.  
Figure 2  
3. Run water through both faucets and inlet hoses, into a bucket or laundry tub, to get  
rid of particles in the water lines that might clog the inlet valves screens.  
4. Attach the hose connected with hot water faucet to the HOT water inlet valve(sign  
with "H') . Attach the hose connected with cold water faucet to the COLD water  
valve(sign with "C"). ( As figure 3)  
NOTE: Do not overtighten. Damage to the valves can result.  
Figure 3  
5. Check for leaks  
(1). Swing the water inlet hose gently to confirm if it's suitable.  
(2). Turn on the water faucets and check for leaks. A small amount of water might  
enter the washers. You will drain this later.  
 
Temperature & hardness of water  
How to select water temperature  
Wash water  
Suggested fabrics  
temperature  
Effect  
May get the best wash effect for  
heavily-soiled articles  
May remove grease, perspiration or  
mechanical oil  
May stop losing luster or yellowing  
Work clothes  
HOT  
111 F 44  
or above  
Solid white fabrics  
/uneasy fading and quietly  
elegant fabrics  
Deep color/easy fading  
articles  
Often change clothing  
Nylon,silk and woolen  
articles  
Mostly applicable for washing general  
-soiled or light-soiled articles  
May not damage the most fibre-made articles  
Slight fading and lightly mutual dyeing  
May reduce the degree of wrinkling  
WARM  
90-110 F  
32-43  
Knitting articles/delicate  
articles  
Articles with very  
sensitive color  
Easy fading articles  
Articles with hand washing  
COLD  
70-90 F  
21-32  
Mostly applicable for light-soiled articles  
Economize hot water  
The optimum rinsing temperature  
In water temperature options, the cold water is commonly used to rinse. Warm water wash and  
warm water rinsing may also be adopted. Comparing cold water rinse, a better rinse effect may  
be got and the laundries will dry more quickly if use warm rinse, but the warm water rinse may  
make the laundries wrinkle easily. In the cold winter, the warm water rinse will provide you a  
more comfortable temperature when dispose the washed laundries.  
Check the temperature of hot water  
The temperature of hot water shall be 111 F(44 ) or above. If you do not know what degree  
the temperature of hot water is up, it will be easy to detect. Maybe you need increase the  
temperature of water heater. How to detect the temperature of hot water?  
1.To get a full bowl of hottest water from injection inlet of hot water used by the washing  
machine.  
Note: If there is no injection inlet on your washing machine, then get hot water from the  
nearest place away from washing machine.  
2.To put a thermometer into the water to detect the temperature.  
Note:The temperature of wash water lower than 70 F(21 )will affect the solution of detergent,  
and this will make it difficult to clean the soil, some fabrics will wrinkling arks and small  
fluffing increase.  
Hardness of water quality  
The reason for not washing the laundry clean may be that the water quality is too hard. You  
may detect the hardness of water quality according to the following methods:  
Tap water -- please consult the local tap water company.  
Well water -- please consult the local residents institutions.  
The content of mineral substances in water shall be calculated as galling/gallon or ?/10000.  
If the content of mineral substance in water exceeds 8 galling/gallon, or higher than  
132/10000, you shall:  
add softener  
put more detergent  
not use soap any more  
 
Wash Cycle and sound  
How to choose washing cycle and washing time  
Follows will help you to choose the right washing cycle for the fabrics you are washing.  
Every cycle is set according to the type and soil degree of the fabrics.  
There is pause step in every cycle, it is normal if it happens during washing.  
Saturated soak(20 minutes): use this option for the heavy-soiled fabrics, for every 3  
minutes interval, the fabrics will be agitated 1 minute. In order to improve the cleaning,  
please use 2 times the amount of recommended detergent(Soak time can be selected  
according to your need).  
REGULAR cycle  
REGULAR cycle is used for normal soiled fabrics, this cycle combine the high-speed washing  
and short high-speed spin. This cycle is mainly used for cottons and linens, you can choose  
the washing time according to the soil degree of the fabrics, 6 minutes for light-soiled fabric,  
12 minutes for heavy-soiled fabrics.  
PERM PRESS cycle  
This cycle is one kind of the delicate cycle, which rinse 2 times, the cold water wash can be  
used to prevent the fabrics from wrinkling. This cycle is for heavy-duty fabrics or synthetics.  
You can choose washing time according to the soil degree of the fabrics.  
DELICATES cycle  
This cycle can use low speed wash action to remove the soil, the low speed spin can prevent  
the fabrics from wrinkling. For light soiled delicate fabrics, use this cycle.  
HAND WASHABLE cycle  
This cycle, low speed wash 20s in every internal of about 20s, this cycle is suitable for the  
fabrics needed special care. The low speed spin can prevent the fabrics from wrinkling.  
Rinse and spin  
In all above cycles, PERM PRESS cycle rinses 2 times , and other cycle rinses 1 times. It is  
necessary of additional rinsing when washing heavy-soiled fabrics with superfluous  
detergent or special care fabrics.  
When the cycle is completed, If you want to rinse once more, push in the button and turn  
the knob in clock wise direction to "rinse " in "NORMAL" cycle(drain-spin-fill-rinse-drain-spin).  
Spin  
If you need separate drain and spin, you can operate as follows:  
Push in the button and turn the knob to the "spin " in "NORMAL" cycle.  
Pull out the knob, the washing machine start to drain then spin.  
Sounds during operation of washing machine  
The following sounds shall be the normal sounds of washing machine in operation:  
Wash cycle  
If the low water level is selected for washing a small amount of laundry, you may hear "kada"  
sound from agitator due to the lower water level in washtub, this is normal washing sound.  
Draining stage  
The draining speed of washing machine is dependent on the installation of it. When the water  
is quickly drained out from the washing machine, you hear the sound of drawing of the air to  
the drain pump. This phenomenon may appear in the final draining stage.  
After draining and before spinning  
When the wash cycle turns from draining to spinning, the sound of gear meshing and puller  
opening may be heard.  
 
1Preparation before washing  
Preparation before washing  
1.Connect the water inlet hose. Open the water  
faucet.  
2.Confirm that the washing machine is earthed  
reliably. Then insert the power plug into the  
receptacle. The earth terminal shall not link to  
gas pipeline and faucet water pipeline.  
3.Put the drain hose up to suitable position.  
Note: "H" is the height of  
the hanged drain hose.  
Pay attention to followings before washing the laundries  
Confirm if there has special requirement for the laundries.  
The quantity of the laundries shall not exceed the rated value. The big laundries like jeans  
shall be put in loosely.  
Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles,  
and other hard objects to avoid scratching the washer interior. Remove non-washable  
trim and ornaments  
Empty pockets and turn them inside out.  
Turn down cuffs, brush away lint and dirt.  
Tie strings and sashes so they will not tangle.  
Mend tears, loose herms, and seams.  
Treat spots and stains.  
Stained or wet garments should be washed promptly for best results.  
Separate heavily soiled items from lightly soiled ones, even if they would normally be  
washed together.  
Separate lint givers(towels, chenille) from lint takers(corduroy, synthetics, permanent  
press). When possible, turn lint givers inside out.  
Separate dark colors from light colors, colorfast items from non-colorfast items.  
Sort by fabric and construction(sturdy cottons, knits, delicate items).  
 
2 Put in the laundries  
How to place the laundry into the  
washing machine in a right way  
Place the laundry into the washing machine loosely till  
the upper of the washtub is full of the laundries(up to  
the hightest holes located). Do not twist the laundry  
round the agitator, the laundry should be easily lifted  
from water to obtain the best washing effect and anti  
-crease effect. The laundry should go downward first,  
after some time go up again.  
Correctly load the laundry and choose the right water  
level. Overload or stack or too low water level will lead  
to: ---wash not clean  
---winkling of the fabrics  
---fluffing  
---rapid wears of the fabrics (because of fluffing)  
Loading should depend on the place the laundry  
occupied, instead of the weight of the laundry itself.  
Every time when you wash, mix the larger item and  
smaller item and evenly place them into the washing  
machine to keep the machine in balance. Unbalance  
will lead to vibration and noise when spin cycle starts.  
For heavy-duty fabrics and some synthetics, in order  
to prevent them from wrinkling, the allowed washing  
laundry should be larger than the actual laundry size,  
when washing, these laundry need largest space to  
move than the bulky item like blankets and jeans.  
The washing time should be reduced when you wash  
fewer laundry. The less the laundry placed in, the  
shorter the washing time needed.  
Place a load of sorted clothes  
into the washer  
Loading suggestions(maximum size loads)  
Please set water level to "high" for the following maximum size loads  
Heavy Work Clothes  
3 trousers  
3 shirts  
4 jeans  
1 coat  
1 overcoat  
Towels  
10 bath towels  
10 hand towels  
14 wash clothes  
1 bath blanket  
Mixed load  
3 double bedsheets  
4 pillowcases  
8 T-shirts  
6 cotta  
2 shirts  
2 boy's suits  
8 handkerchiefs  
Delicate fabrics  
3 woman's underwear  
1 coat  
Knitting  
3 trouser  
3 boy's suits  
6 shirts  
4 slippers  
4 underwear  
2 corset  
1 babywear  
4 caps  
4 formal dress  
 
3 Add the detergent  
Softener injection inlet  
If the content of mineral substances in water  
exceeds the standard limits, please add  
softener, and softener shall be added from  
softener injection inlet.  
Bleach  
injection inlet  
How to use the washing powder  
Direct dissolved in the machine  
1.Fill water to "Low" water level.  
2.Add the power. Run for 30 seconds to  
dissolve it completely.  
3.Put in the laundries. Select suitable  
water level.  
The instant dissolving of the washing  
powder:  
1. Prepare warm water of 30 and a  
container.  
2. Add the powder while stirring to fully  
dissolve it.  
The powder is more prone to pollute the  
laundries than the detergent. Therefore  
please use it with proper quantity.  
It is suggested not to use high sudsing  
detergent.  
Different washing powders have different  
dosage. Please refer to the usage manual  
of the washing powder for the details.  
How to use the bleacher  
Fill water to decided level. Dilute the  
bleacher with container. Pour it slowly  
into the washing tub.  
Avoid using bleacher on laundries with  
color or pattern as they are prone to  
lose color.  
The bleacher shall not touch the  
laundries directly.  
Refer to the user's manual for the  
usage and quantity of the bleacher.  
For powder bleacher, please dissolve  
it before use.  
The bleach injection inlet is suitable  
only for liquid bleacher.  
Standard dosage of the detergent and water quantity(suggest)  
Common powder,  
Add 40g in each 30L water Add 25g in each 30L water  
Concentrated powder,  
Water  
quantity  
Water  
level  
High  
Medium  
Low  
About88L  
About60L  
About38L  
4 Close the top lid  
If you open the top lid,  
the machine will stop working.  
 
5 Select water level  
LOAD SIZE KNOB  
Three water levels available according to the laundries quantity:  
Large; Medium; Small.  
LOAD SIZE  
Page 8  
LARGE  
After the water inlet as per the preset water level, in case  
additional water quantity is required, please first set the button  
to the "RESET", and perform automatic water inlet. When it  
reaches the suitable water level, you can turn it to the preset  
water level.  
MEDIUM  
RESET  
SMALL  
After the water inlet under set water level, if higher water level is  
needed, please first turn the knob to " Reset ", then turn back to  
needed water level. The washing machine will fill water to the  
new water level automaticly.  
6 Set of temperature of wash and rinse water  
WASH  
RINSE  
TEMPERATURE  
According to the different washing laundries,5 kinds of different  
wash/rinse temperature may be selected.  
Note:  
For the marked temperature, the upper is wash temperature,  
and the lower is rinse temperature.  
COOL  
COOL  
WARM  
COOL  
WARM  
WARM  
HOT  
COOL  
HOT  
WARM  
7 Cycle program select  
First push on the cycle selection button.  
Rotate this button in clock wise direction. You may select the following cycles singly:  
REGULAR cycle, DELICATES cycle, HAND WASHABLE and PERM PRESS cycle.  
The wash time may be set for each cycle according to the requirements.  
After finishing the selection of cycle, pull out the button and the washing machine may  
begin to work.  
If want to stop the washing machine at any time, push in the cycle control button.  
If restart the washing machine, close the cover  
PERM PRESS  
REGULAR  
OFF  
Soak  
Spin  
first, then pull out the cycle control button.  
Note:  
Heavy 15  
There is pause step in each washing cycle, this is  
normal in operation of washing machine. In the  
operation of washing machine, sounds appeared  
in P may be heard, and most of these sounds are  
normal.  
Regular 6  
Rinse  
Rinse  
Light 6  
Regular 9  
OFF  
Spin  
Spin  
OFF  
Regular 6  
Light 3  
Rinse  
PULL TO START  
PULL TO STOP  
Rinse  
Regular 6  
OFF  
Spin  
HAND WASHABLE  
DELICATES  
 
Attention  
The pulsator will not rotate unless the water is filled to selected water level.  
Do not use the SOAK program for the woolen laundries.  
8 The washing is finished  
It beeps to indicate  
the finishing of  
washing  
The power will be switched off automatically  
after the finishing of the washing.  
9 Disposal after washing  
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise  
it may influence your using the machine.  
Please first pull off the power plug from the receptacle before cleaning.  
The filter screen of the water inlet valve is  
likely to be blocked by foreign materials  
and influence the water inlet. Please clean  
it with brush every two months.  
If the cabinet is dirty, wipe it with wet cloth  
Do not flush it directly with water.  
Wipe it with neutral detergent.  
Do not wipe it with thinner, petrol,  
alcohol etc.  
Petrol  
Thinner  
Alcohol  
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).  
2.Do not store water in the washing machine for a long period. Drain the water completely  
after each using.  
3.Be sure to pull off the power plug before maintenance.  
4.Hang up the power cord and drain hose.  
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid  
for some time (about 1 hour), then close the top lid.  
 
Trouble-shooting Answer to question  
(If there's breakdown, please pull off the power plug before checking) The following phenomena  
are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real  
breakdowns, please come to the special maintenance department or after-sale service department  
of our company. Do not repair it by yourself.  
Phenomenan  
The reason  
How to settle  
In washing,rinsing,spinning,  
the machine stops running.  
The top lid is not closed.  
Close the top lid.  
Put down the drain hose.  
Is the drain hose put down?  
Is the drain hose blocked  
by foreign material?  
Open and close the top lid once.  
Clean the foreign material.  
Open and close the top lid once.  
Wait for the normal water  
pressure before use.  
No water filling or  
filling slowly  
Is the water pressure lower?  
Use it when the power is on.  
Insert the power plug tightly.  
Is there power failure?  
Is the power plug loose?  
The machine does not act.  
Is the machine slanting?  
Are the laundries slanting  
in spinning?  
Level the machine properly.  
Re-order the laundries.  
There's abnormal sound  
inside the machine.  
Is the jointer screw of the  
water inlet hose is loose  
or twisted awry?  
Fasten the jointer screw  
properly.  
The water faucet leaks.  
If do not need continue  
draining, you can raise  
the entrance of drain hose  
and let water flow back  
inner tub. .  
During draining, the washer  
continues draining when push  
in programme selector knob.  
It is special phenomena for  
washer with pump.  
Common phenomena  
Phenomena  
Explanation  
Rotate the "Process selector" knob to  
select "Spin", but it doesn't work.  
The program is setting the drain time. Some  
time is needed before it starts spinning.  
There may be some water flowing out of  
the drain hose in the first use of the machine.  
It is the water remained in the factory  
inspection of performance.  
 
Specification  
Model  
XQJ100-96  
Rated voltage frequency  
240V ~ 50Hz  
Rated washing / spinning capacity 10.0kg (weight of standard dry cloth)  
Water level/Water quantity (about) High/95L, Medium/72L, Low/51L  
About 190L(High water level; Normal program)  
Max water consumption  
Injection pressure  
Rated washing power  
Rated spinning power  
Weight( bout)  
0.03Mpa-0.78Mpa  
680W  
680W  
68kg  
Dimension  
L 686 mm W 686 mm H 1115mm  
 

Graco Stroller PD213968A User Manual
Grundig Projection Television CP X385W User Manual
Guardian Technologies Telephone WRT 10 A User Manual
Hamilton Beach Griddle 840098400 User Manual
Hasbro Motorized Toy Car 60598 User Manual
Heath Zenith Door 598 1143 01 User Manual
HP Hewlett Packard Laptop 443562 001 User Manual
Huffy Board Games Pro Slam Rim User Manual
Husqvarna Saw 1152450 26 User Manual
Impex Fitness Equipment MWB 26780 User Manual