Flow Meters
For Proportioning Equipment
HG6000
S3000
G250
G250 HR
G3000
G3000 HR
Coriolis Mass Flow
G250/G250 HR, G3000/
G3000 HR and S3000
HG6000/HG6000 HR
Coriolis Mass Flow
• Positive displacement, spur gear
flow meter
• Positive displacement, helical gear
flow meter
• Non-intrusive mass flow meter
• Designed for all abrasive
and filled materials
• Designed for non-abrasive
and unfilled materials
• Designed for higher flow rates
and higher viscosity materials
• Stainless steel, waterborne and acid
compatible for a wide range of materials
• Highly accurate, even with low
flow rates
• Highly accurate, even with low
flow rates
• Uses less material to flush
• Wide range of flow rates and material
• FM-, CSA- and ATEX-marked
• ATEX- and CE-marked
• Stainless steel compatible to handle • Stainless steel, water-base compatible
low to medium viscosity materials
for medium to high viscosity materials
• ETL us, ATEX- and CE-marked
• ATEX- and CE-marked
• 1/8 in and 3/8 in ID options
|