Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
Induction Green Heat
Garland Induction Built-in Unit RTCSmp Compact-Line
Models:
GI-SH/DU/CL 7000-555
GI-SH/DU/CL 7000-610
GI-SH/DU/CL 10000-610
GI-SH/DU/CL 7000-655
GI-SH/DU/CL 10000-555
GI-SH/DU/CL 10000-655
Garland Induction Built-in Compact-Line
with two cooking zones consisting of:
RTCSmp Built-in Compactline, operation
unit, Ceran glass, as well as installation kit.
Equipped with the latest RTCSmp (Realtime
Temperature Control System) technology.
Available as Dual Cooking Tops and Quad
Cooking Tops.
Standard Features
RTCSmp Built-in Compactline:
Coil Carrier Sheet:
Compactline encompasses all critical components in one
assembly such as an induction generator, round coil,
ventilator, controller and front indicator lamp LED green.
Compact design with induction coils and sensors. Engineered
specifically for compact kitchen designs.
Round Coil: One pan is used for each heat-zone. Round coils
Built in a robust method of construction, they are
compact and powerful with a revolutionary technology
in a complete case of CrNi-steel. Equipped with continuos
control, they allow for high performance and efficient
cooking.
have higher power density and energy efficiency.
Safety above all:
• RTCSmp electronic temperature control that monitors the
state of the induction coils, ceramnic glass, heat sink and
electronics, all in real time.
RTCSmp Built-in Compactline units are installed in counters
or island suites.
• RTCSmp monitors the energy supply.
• No resonance noise.
Operation unit:
• Limiting the energy supply at peak load.
• IR interface with diagnostic system.
• Works with a variety of pans.
Simple operation using a rotary switch that adjusts the
power levels from 1 to 12. For higher power, just turn the
knob to higher settings.
CE models comply with the latest European Norms:
EN 60335-1, EN 60335-2-36, EN 62233 (EMC/EMV)
North American models:
ETL listed in compliance with
UL 197, CSA C22.2 No.109, NSF-4
Complies with FCC part 18, ICES-001
Garland Commercial Ranges Ltd.
1177 Kamato Road,
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Mississauga, Ontario
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
L4W 1X4 CANADA
GI-SH/DU/CL 7000/10000 -655
Note: make sure that the size of the cut-out in the built-in
construction is 14.49”x28.66” (368x728 mm) for two cooking
zones and 28.66”x28.66” (728x728 mm) for four cooking zones
and the depth of the clipping has to be at least 7.87” (200 mm).
Dimension
WxDxH
Inch (mm)
No. of
Cooking
Zones
Ceran Glass
Ceran Glass
Size of Coils Rating of
Model
Inch (mm)
Inch (mm)
Inch (mm)
Coils
3.5 kW
5.0 kW
3.5 kW
5.0 kW
3.5 kW
5.0 kW
Dual Cooking Tops
Quad Cooking Tops
12.22x21.85x6.34
(310.5 x 555 x 161)
11.81x23.62x0. 24
(300 x 600 x 6)
23.62x23.62x0.24
(600 x 600 x 6)
08.66
(0220)
GI-SH/DU/CL 7000-555
GI-SH/DU/CL 10000-555
GI-SH/DU/CL 7000-610
GI-SH/DU/CL 10000-610
GI-SH/DU/CL 7000-655
GI-SH/DU/CL 10000-655
Technical Data
2 or 4
2 or 4
2 or 4
2 or 4
2 or 4
2 or 4
12.22x21.85x6.34
(310.5 x 555 x 161)
11.81x23.62x0. 24
(300 x 600 x 6)
23.62x23.62x0.24
(600 x 600 x 6)
08.66
(0220)
12.22x24.02x6.34
(310.5 x 610 x 161)
14.76x25.6x0.24
(375 x 650 x 6)
25.60x25.6x0.24
(650 x 650 x 6)
010.63
(0270)
12.22x24.02x6.34
(310.5 x 610 x 161)
14.76x25.60x0.24
(375 x 650 x 6)
25.60x25.6x0.24
(650 x 650 x 6)
010.63
(0270)
12.22x25.79x6.34
(310.5 x 655 x 161)
14.17x28.35x0.24
(360 x 720 x 6)
28.35x28.35x0.24
(720 x 720 x 6)
010.63
(0270)
12.22x25.79x6.34
(310.5 x 655 x 161)
14.17x28.35x0.24
(360 x 720 x 6)
28.35x28.35x0.24
(720 x 720 x 6)
010.63
(0270)
Electrical Loading
Watts 208/60/3 400/50/3 440/50/3
Network impedance (Zmax): 0.25 Ω
Air flow fan: 4238 ft3/h (120 m3/h maximum)
Cut out for air supply: 10.08 sq. in (6500 mm2, min)
Cable Kit: 3.3 ft (1.0 m)
Model
GI-SH/DU/CL 7000
7000
22 amp
30 amp
11 amp
16 amp
10 amp
15 amp
GI-SH/DU/CL 10000 10000
Garland/ U.S. Range products are not approved or
authorized for home or residential use, but are intended
for commercial applications only. Garland/ U.S. Range will
not provide service, warranty, maintenance or support of
any kind other than in commercial applications.
Form# GI-SH/DU/CL 7000/10000 (12/23/13)
Garland Commercial Ranges Ltd.
1177 Kamato Road,
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Mississauga, Ontario
L4W 1X4 CANADA
Canada or USA Parts/Service 1-800-427-6668
|