ADC Network Card ETP 64 User Manual

ETP-64 Ethernet Termination Panel  
Central Office Connectivity for Carrier Ethernet Services  
The Ethernet termination panel was developed to provide a streamlined transition from the  
connectorized interface cables of a carrier Ethernet system to main distribution frame (MDF)  
paired circuits.  
The panel is relay rack mounted and terminations are made on the rear of the Ethernet panel.  
Installing the ADC ETP-64 Ethernet termination panel allows separate circuits to route individually  
or grouped as needed by bringing all circuits out to the MDF.  
Features  
All connections made on rear side of ETP-64  
64ea. 4-wire Ethernet ports from Central Office based equipment via 50 pin AMP (male/plug type)  
connectors  
64ea. 4-wire Ethernet ports (128 pair) to MDF via LSA-PLUS NT IDC terminal blocks  
Internal wiring directly connects the equipment side to MDF side (no cross connect jumpering)  
ETP-64 converts from 50 pin AMP type connector to individually paired circuits  
Test access point for wire testing and troubleshooting of equipment independent of MDF wiring  
w w w . a d c . c o m  
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0  
1 - 8 0 0 - 3 6 6 - 3 8 9 1  
 

A4 Tech Digital Camera PK 635 User Manual
Addonics Technologies Computer Drive AD5SAHPM E User Manual
AEG Vacuum Cleaner 1800 User Manual
AIPTEK Camcorder POCKETCAMX User Manual
Aiwa CD Player CX NHMT25 User Manual
AllerAir Air Cleaner 600 D User Manual
Amana Microwave Oven RMC 720A User Manual
Amcor Air Conditioner CPLM 12KE B 410 User Manual
Atlona TV Converter Box AT VGA RS300SRS User Manual
Axis Communications Security Camera P5522 User Manual