XM Satellite Radio Portable Radio Portable Satellite Radio User Manual

Delphi Corporation  
1441 West Long Lake Road  
Troy, Michigan 48098-5090  
U.S.A.  
Customer Service: [1] 877.GO DELPHI  
Printed on Recycled Paper  
©2002 Delphi Corporation. All rights reserved.  
DAO-02-E-067  
Download from Www.Somanuals.com. All Manuals Search And DowTnhleoSaKYdFi.name, XM name, and related logos are  
trademarks of XM Satellite Radio Inc.  
 
Welcome  
Thank you for purchasing a SKYFi™ Receiver  
by Delphi. Your SKYFi Receiver gives you  
®
access to over 100 XM Satellite Radio chan-  
nels of music, news, and information.  
Your SKYFi Receiver must be used with a  
SKYFi adaptor kit, such as the SKYFi Home Kit  
or SKYFi Vehicle Kit. These kits are available at  
retailers where SKYFi main units are sold.  
SKYFi Home Kit  
SA10004  
SKYFi Vehicle Kit  
SA10002  
 
CONTENTS  
1
Section 4  
Section 1  
Menu Commands and Settings· · · · · · · · 11-12  
Getting Started: Activating SKYFi· · · · · · 2  
Section 5  
Reference  
Section 2  
SKYFi Receiver  
Taking Care of Your SKYFi · · · · · · · · · · 13  
Replacing SKYFi Remote Control  
Batteries · · · · · · · · · · · · · · · · · · · · · · · 13  
Technical Information · · · · · · · · · · · · · · 14  
Troubleshooting · · · · · · · · · · · · · · · · · · · 15-16  
Contacting Customer Service · · · · · · · · 16  
SKYFi Receiver Controls· · · · · · · · · · · · 4  
SKYFi Display Screen · · · · · · · · · · · · · · 5  
SKYFi Remote Control · · · · · · · · · · · · · 6  
Section 3  
Basic Operations  
Turning SKYFi On and Off · · · · · · · · · · 7  
Basic Channel Selection· · · · · · · · · · · · 7-10  
Enlarging Display Text · · · · · · · · · · · · · 10  
Save and Recall Artist Name  
and Song Title · · · · · · · · · · · · · · · · · · 10  
Section 6  
Warranty · · · · · · · · · · · · · · · · · · · · · · · · · · · 17-18  
 
2. Press the power button to turn the SKYFi  
Receiver on and verify that it is playing  
Channel 1, the XM Preview Channel.  
4. Activate your XM Satellite Radio service.  
To subscribe, make sure you have a major  
credit card and your XM Satellite Radio  
ID number handy and contact XM at  
also activate your service by calling  
1-800-852-9696.  
Getting Started: Activating SKYFi  
2
To quickly begin enjoying XM Satellite Radio,  
follow these simple steps:  
3. Select Channel 0. The receiver’s eight-  
character XM Satellite Radio ID number will  
appear on the display. Write the number  
here:  
1. Set up your SKYFi Receiver using the instal-  
lation instructions included in the SKYFi  
Home Kit, SKYFi Vehicle Kit, or other kit, or  
with the help of a professional installer.  
Warning: When using this product it is always  
important to keep your eyes on the road and your  
hands on the wheel. Not doing so could result in injury  
to you or to others or in property damage  
Caution: Failure to properly follow all installation  
instructions may result in personal injury or damage to  
your SKYFi or to your vehicle.  
Note: Carefully check your XM Radio ID.  
The letters I, O, S, and F are not used.  
 
3
Category search  
Scroll wheel  
Enter button  
Control keys  
Power button  
Number keys  
Figure 1. SKYFi Receiver.  
 
Press menu to select and change  
receiver configuration options.  
Use the scroll wheel to scroll through  
and select a channel or a menu option.  
SKYFi Receiver  
SKYFi Receiver controls  
4
The SKYFi unit has eight control buttons,  
a scroll wheel, and 10 number keys.  
Switches between DIRECT entry,  
Preset A, and Preset B.  
Number keys are used to select a  
channel directly (when in DIRECT  
entry mode) by entering its number.  
Select presets (when in Preset A or  
Preset B mode) by entering the  
number of the preset.  
Turns the SKYFi Receiver on or off.  
Enters category search and displays  
channels grouped by category.  
Continued presses step through  
available categories. Category  
search times out after 6 seconds if  
no channels are selected.  
With normal channel display, the  
display button toggles between  
normal display, large channel num-  
ber, and scrolling text. When on the  
channel navigation screen, the display  
button toggles between channel  
name, artist name, and song title.  
The enter button is used to select  
channels and menu options.  
Memory saves whatever information  
is on the display screen for later  
recall. Press and hold memory key  
to recall information.  
 
Keypad mode (DIRECT,  
Preset A, or Preset B)  
SKYFi Receiver display screen  
While tuned to an XM channel, the SKYFi  
default display contains information  
about that channel and the SKYFi settings.  
See figure 2.  
Signal strength indicator  
5
(zero to three bars)  
Your SKYFi display can be customized.  
See the Basic Operations section, beginning  
on page 7.  
Channel category  
Channel name  
and number  
Artist name  
Song title  
Figure 2. SKYFi Receiver display screen.  
 
Number keys are used to select a  
channel directly (when in DIRECT entry  
mode) by entering its number. Select  
presets (when in Preset A or Preset B  
mode) by entering the number of the  
preset.  
SKYFi Remote Control  
Turns the SKYFi Receiver on and off.  
6
Enters category search and steps  
through available categories.  
Enters channel search and selects  
among different channel/menu options  
on the screen.  
With normal channel display, the  
display button toggles between normal  
display, large channel number, and  
scrolling text. When on the channel  
navigation screen, the display button  
toggles between channel name, artist  
name, and song title.  
The enter button is used in selecting  
channels and menu options.  
Mutes the audio.  
Memory saves whatever information  
is on the display screen for later recall.  
Press and hold memory key to recall  
information.  
Switches between DIRECT entry, Preset  
A, and Preset B.  
Changes to the next (+) or previous (-)  
channel.*  
Figure 3. SKYFi Remote Control.  
*When SKYFi is connected to the SKYFi Audio  
System, these buttons control the volume, and  
Download from Www.Somanuals.com. All Manuals Search And Downolothaedr .channel-selection methods should be used.  
Select a channel by number  
Basic channel selection  
Basic Operations  
1. Verify that SKYFi is in DIRECT entry mode.  
DIRECT should appear in the upper right  
corner of the display. If A or B appears,  
SKYFi allows you to select a channel by directly  
entering its number, using a preset key, or by  
tuning up or down to reach the channel.  
Turning SKYFi on and off  
Press  
on the SKYFi Receiver or SKYFi  
Remote Control. When first turned on, the  
receiver will automatically tune in to the  
last channel listened to and recall the previous  
settings.  
7
press  
until the display says DIRECT.  
2. Enter channel number using the number  
keys.  
Please turn off SKYFi and wait for the screen  
to go blank before removing it from the home  
stand or car cradle. This will ensure that all of  
the current settings are saved.  
 
Set/select channel presets  
Selecting channel presets  
Tune to a channel  
Your SKYFi Receiver can store up to 20 preset  
channels. They are organized into two differ-  
ent groups, or memory banks, Preset A and  
Preset B, each with 10 channels corresponding  
to the 10 number keys.  
Press  
until an A or B appears in the upper  
Tune up and down the channel list using  
right corner of the display. Press the number  
key corresponding to the desired preset.  
the SKYFi scroll wheel  
buttons on the remote.*  
or the  
8
Skip channels in the lineup using the Channel  
Skip/Add function described in Section 4,  
“Menu Commands and Settings.” This  
will allow you to tune across only the XM  
channels you listen to regularly.  
Setting channel presets  
1. Tune in the channel you want to register  
as a preset.  
2. Select either Preset A or Preset B by  
*When SKYFi is connected to the SKYFi Audio System,  
these buttons control the volume, and other channel-  
selection methods should be used.  
pressing  
until an A or B appears in  
the upper right corner of the display.  
3. Press and hold the number key correspon-  
ding to the preset you would like to set. The  
channel name and number will highlight  
and the audio will mute for 2 seconds to  
indicate that the preset is registered.  
 
4. Select a channel with  
select a channel, the display will time out and  
return to the channel you are listening to.  
. If you do not  
Preview favorite channels  
Preview and select a channel based  
on channel name or the current  
song or artist  
You can use the preset keys and category  
search to preview the artists and songs cur-  
rently playing on your favorite channels  
before deciding whether or not to select any  
of them.  
1. Set your favorite XM channels as presets,  
as explained in “Setting channel presets”  
on page 8. Your SKYFi will automatically  
create new categories, called Preset A  
and Preset B, when presets are set in  
either bank.  
You can use your SKYFi to scan through the  
XM channel lineup, see what channels are  
available and what is currently playing, and  
then decide if you want to leave your current  
channel.  
9
Select a channel by category  
Press either of the category keys  
to enter category search.  
1. Continue pressing one of the category  
keys  
until a category you are  
1. Press  
or  
on the remote control to  
interested in appears.  
2. Use the SKYFi scroll wheel  
enter channel search and display the current  
channel plus the two channels above and  
the two below it on the lineup.  
or the  
remote  
keys to highlight a  
channel within the given category.  
2. Press the category keys  
to enter  
2. Press  
or  
repeatedly (or press and  
3. Press  
to select a channel.  
category search, and continue pressing it  
until either Preset A or Preset B appears on  
the display.  
hold to move quickly) to scroll through the  
channel lineup.  
4. If you do not select a channel, category  
search will time out after several seconds.  
3. Press  
to change the channel informa-  
tion displayed from channel name to artist  
name or song title.  
 
3. Press  
to display the channel name,  
Enlarging display text  
Save and recall artist name and song title  
You can save the artist name and song title on  
the current channel for future reference.  
artist name, or song title for each preset.  
4. Your SKYFi Receiver will remember if you  
were in the preset section of category  
search so that the next time you press a  
category key  
display the information on those preset  
channels.  
Your SKYFi display can be reconfigured to be  
more readable from across a room in the  
home or office.  
1. Press and release  
to save the current  
10  
1. Press  
while on a normal play screen  
screen information. Up to 10 different artist  
names/song titles can be saved at once,  
after which any new information that is  
saved will replace the oldest information in  
memory.  
it will immediately  
to switch to a larger-text channel-number  
configuration.  
2. Press  
a second time to continuously  
scroll the artist and song title information  
across the display in large text.  
2. To recall saved artist name/song title  
3. Press  
display.  
again to return to the default  
information, press and hold  
seconds. Next, use the SKYFi scroll  
wheel or the remote  
for 2-1/2  
keys  
to display each saved artist name/song  
title.  
 
Memory Recall  
This is an alternative way of entering memory  
recall mode. It functions the same as pressing  
Line Out Level  
Menu Commands and Settings  
Use this to adjust the SKYFi Receiver audio-  
level output if it is too high, causing distortion,  
or too low for your car or home/office stereo.  
Most users will NOT need to change this level  
from the factory setting. This is not a volume  
control. You should set the volume using the  
audio system connected to your SKYFi  
Receiver.  
Pressing  
enters the menu section of  
SKYFi. Here, you can change each of the fol-  
lowing options using the scroll wheel  
and holding  
.
on the receiver or the  
on the remote control. While in the menu  
section, acts as a “back” button, allow-  
keys and  
Channel Skip/Add  
You can skip channels in your SKYFi channel  
list to prevent them from being accessible  
11  
ing you to back out of existing sections.  
Following are the settings that can be  
changed:  
with the SKYFi scroll wheel  
or the remote  
or keys. Deleted channels can  
still be accessed by DIRECT entry or by using  
a preset key. They can also be added back to  
the list later.  
Brightness + Contrast  
This control allows you to adjust the bright-  
ness and contrast of your display. You may  
find you need to use this when you switch  
between in-car and indoor use.  
To completely lock SKYFi from receiving a chan-  
nel, call XM Customer Care at 1-800-852-9696.  
 
Auto Shutdown  
Antenna Aiming  
Factory Default  
You can set your radio to automatically shut  
off 60, 120, or 180 minutes after it is turned on.  
This should be used to keep your car battery  
charged if you power your radio in your  
vehicle via the cigarette lighter/auxiliary power.  
You can optimize the position of your home  
antenna, as described in the SKYFi Installation  
Selecting this option restores all of the set-  
tings to their original factory setting. This is  
useful if you alter a number of settings, then  
change your mind but don’t know how to  
eliminate the changes you made. Remember,  
restoring the factory settings will erase all of  
the presets. You will have to reset them if you  
restore the factory-default settings.  
Guide, using this screen. Press  
to return  
to the main play screen.  
12  
If your vehicle continues to power the  
cigarette lighter/auxiliary power after you  
remove your key and you leave SKYFi on,  
SKYFi will shut down automatically after  
the time period you select and will not drain  
your battery.  
 
Replacing SKYFi Remote Control  
batteries  
Reference  
Taking care of your SKYFi  
Your SKYFi Remote Control uses a 3V CR2032  
Lithium battery, available at most retailers that  
carry electronic products. To replace battery,  
slide the battery door off the back of your  
remote control, press down on the battery,  
and slide it out. Replace battery with positive  
end facing the battery door. Replace battery  
door.  
(Failure to follow these instructions may  
result in personal injury or damage to your  
SKYFi Receiver or to your vehicle.)  
• Use only a soft, dry cloth to clean the  
outside of your SKYFi and any peripherals.  
• Do not use any solvents, chemicals, or  
cleaning solutions containing alcohol,  
ammonia, or abrasives.  
13  
• Do not allow liquids to spill on the unit.  
• Do not use sprays near your SKYFi.  
• It is best to keep SKYFi out of direct sunlight  
or other sources of extreme heat.  
• Avoid placing SKYFi in a setting where air  
cannot circulate around the unit.  
Figure 4. SKYFi Remote Control battery replacement.  
 
Technical information  
Dimensions  
SKYFi Receiver · · · · · · · · · · · · · · · · 4.65 in W x 2.91 in H x 1.26 in D (118 mm x 74 mm x 32 mm)  
SKYFi Remote Control· · · · · · · · · · 1.50 in W x 4.33 in H x .79 in D (38 mm x 110 mm x 20 mm)  
Weight  
SKYFi Receiver · · · · · · · · · · · · · · · · 6.70 oz (190 g)  
SKYFi Remote Control· · · · · · · · · · 1.52 oz (43 g)  
14  
Inputs/Outputs  
(when connected to car cradle or home stand)  
Antenna (car cradle)· · · · · · · · · · · · 2 RF SMB connectors (FAKRA keyed, Tan/Curry and Green)  
Antenna (home stand)· · · · · · · · · · 1 RF SMB connector  
Power · · · · · · · · · · · · · · · · · · · · · · · P13 connector, 6V DC 1 mA maximum  
Audio output· · · · · · · · · · · · · · · · · · 3.5 mm diameter ministereo jack  
 
If you see this on the display:  
You should:  
• Make sure the adaptor is firmly seated  
in the cigarette lighter/auxiliary power  
socket.  
• Check the adaptor fuse by unscrewing  
the ribbed end of the adaptor and  
examining it. If required, replace with  
a 1-amp fuse only. If your cigarette  
lighter adaptor does not have a  
removable end cap, then it is  
Troubleshooting  
Your SKYFi Receiver is designed and built  
to provide you with trouble-free perform-  
ance without the need for service. If it does  
not appear to be functioning correctly,  
please follow these troubleshooting steps:  
NO SIGNAL  
Cause: The XM signal is out  
of range.  
If you are using SKYFi at  
home, reposition the antenna.  
If you are using SKYFi in your  
car, the message should dis-  
appear as soon as you move  
out of an obstructed area such  
as an indoor garage. If the  
problem persists, make sure  
your antenna is mounted out-  
side and on top of your car  
with a clear view of the sky.  
1. Make sure SKYFi is properly seated in  
its cradle or stand.  
2. Make sure all connectors are properly  
attached in the back of the cradle or  
stand.  
3. If you are using the cigarette lighter/  
auxiliary power adaptor to power your  
SKYFi and cannot turn it on:  
• Make sure the cigarette lighter/auxiliary  
power socket is clean and free of  
corrosion.  
15  
equipped with an internal fuse that  
resets itself after it is left unpowered  
for a period of time.  
ANTENNA  
Make sure antenna is cor-  
rectly attached to the SKYFi  
Home Stand or SKYFi Car  
Cradle and that antenna  
cable is undamaged and  
free from kinks. Turn the  
SKYFi Receiver off and back  
on to reset this message.  
4. If you are using the A/C adaptor in the  
home or office, make sure it is plugged  
in and that there is power at the outlet.  
OFF AIR  
Cause: The channel selected is  
not currently broadcasting.  
Tune in to another channel.  
 
If this happens:  
You should:  
Contacting Customer Service  
You can only receive XM channels  
0 and 1  
Cause: Your SKYFi Receiver is  
not activated.  
Contact XM as described in “Getting Started: Activating  
SKYFi” on page 2.  
For additional information in solving problems with  
your SKYFi Receiver, contact Delphi at 1.877.GO DELPHI  
(1.877.463.3574) Monday – Friday, 8:00 am – 4:30 pm  
The audio sounds distorted  
The audio level is too low  
You cannot tune in to a channel  
Reduce audio output level as described under “Menu  
Commands and Settings: Line Out Level” on page 11.  
Increase audio output level as described in “Menu  
Commands and Settings: Line Out Level” on page 11.  
16  
1. Make sure the channel has not been skipped (see the  
“Channel Skip/Add” function covered on page 11).  
2. Verify that you are authorized to receive that channel  
as part of your subscription with XM and that you  
have not asked XM to block that channel on your  
SKYFi unit.  
No song title or artist name displays  
Nothing is wrong with your receiver. This is normal on  
many talk and news channels where there is no song  
playing. Also, this information may not yet be in the  
database for some music channels.  
 
The duration of Delphi’s warranty with respect  
to Delphi Portable XM Satellite Radio Products  
is limited to one (1) year from the date of sale  
to the original consumer purchaser.  
Delphi will, as its sole obligation under this  
warranty, replace or repair, at its option,  
any Product that does not conform to this  
warranty. Under no circumstances will Delphi  
be liable for any incidental or consequential  
damages under this warranty or any implied  
warranties.  
Portable XM Satellite Radio Limited  
Consumer Warranty  
Delphi Product and Service Solutions  
(“Delphi”) warrants all Portable XM Satellite  
Radio Products sold by Delphi (“Products”) to  
be free of defects in material and workman-  
ship, subject to the following conditions.  
No other express warranties are made with  
respect to any Product. All implied warranties,  
including warranties of merchantability and  
fitness for a particular purpose are limited to  
the warranty period set forth above. This  
warranty is not transferable and applies only  
to the original consumer purchaser of the  
Product.  
Delphi will not be responsible for damage  
resulting from any (i) deviation from Delphi’s  
operating instructions as printed in Delphi’s  
catalog or on any packaging, labels or  
other literature provided with a Product, (ii)  
installation of a Product in a manner which is  
inconsistent with Delphi’s written instructions,  
(iii) alteration or modification of a Product, (iv)  
misuse, (v) neglect, (vi) abuse, (vii) accident,  
17  
 
(viii) normal wear and tear, (ix) commercial  
use, (x) service by anyone other than a Delphi  
authorized repair facility, or (xi) other improper  
application, installation or operation of the  
Product.  
When contacting Delphi by fax, please  
include a letter detailing your complaint and  
provide a daytime phone number where you  
can be reached. If further clarification or  
additional information is required from  
Delphi, you may call Delphi at 1-877-GO DELPHI  
(1-877-463-3574).  
How state law relates to the warranty:  
Some states do not allow limitations on how  
long implied warranties last, or the exclusion  
or the limitation of incidental or consequential  
damages. So the above limitations or exclu-  
sions may not apply to you. This warranty  
gives you specific legal rights. You may also  
have other rights that may vary from state to  
state.  
How you (the Customer) can get service:  
To obtain warranty service during the first  
thirty (30) days after the date of purchase,  
you must return the defective Product with  
the original receipt to the original place of  
purchase. To obtain warranty service during  
the remainder of the warranty period, you  
must contact Delphi by phone at 1-877-GO DELPHI  
(1-877-463-3574) or by fax at 1-866-790-3675.  
If warranty service is needed at any time  
during the warranty period, the purchaser  
will be required to furnish a sales receipt/  
proof of purchase indicating the date of  
purchase, amount paid and place of  
purchase. Customers who fail to provide  
such proof of purchase will be charged for  
the repair of any Product.  
18  
NO PERSON IS AUTHORIZED BY DELPHI  
TO MODIFY OR ADD TO THIS LIMITED  
WARRANTY.  
 
This device complies with part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference,  
and (2) this device must accept any interference  
received, including interference that may cause  
undesired operation.  
19  
Changes or modifications not expressly approved  
by Delphi could void the user’s authority to operate  
this equipment.  
 
 

West Bend Fryer L 5265 User Manual
Whirlpool Freezer TVF15FR User Manual
Whirlpool Microwave Oven GH5184XPB3 User Manual
Whirlpool Washer Dryer W10101293A User Manual
Whirlpool Washer GCAM2792LQ0 User Manual
Whirlpool Washer WTW6700TU1 User Manual
Windsor Vacuum Cleaner CV28 User Manual
Wolf Electric Steamer ICBIS15 S User Manual
Xantrex Technology Battery Charger TC10TB User Manual
Zanussi Refrigerator ZCR135R User Manual