Toastmaster Iron 3305MX User Manual

OWNER’S MANUAL  
Model No. 3305MX  
®
Toastmaster  
S T E A M I R O N  
m a s t e r  
0 5 M X  
A L  
 
ADDITIONAL  
IMPORTANT SAFEGUARDS  
CAUTION HOT SURFACES: This appliance generates heat and  
6 0 H z 1 3 0 0 W  
escaping steam during use. Proper precautions must be taken to  
prevent the risk of burns, fires or other injury to persons or damage  
E C I F I C A C I O N E S E L É C T R I C A S  
to property.  
1. All users of this appliance must read and understand this Owner’s  
e s t e a p a r a t o e n u n c i r c u i t o e l é c t r i c o s e p a r a d o .  
Manual before operating or cleaning this appliance.  
e l e c t r o d o m é s t i c o n o f u n c i o n e c o r r e c t a m e n t e . S e r e c o m i e n d a  
c u i t o e s t á s o b r e c a r g a d o c o n o t r o s e l e c t r o d o m é s t i c o s , e s p o s i b l e  
2. The cord to this appliance should be plugged into a 127V AC electri-  
R R I E N T E caE l oL uÉ tleC t oT nlyR . I C A  
3. If this appliance begins to malfunction during use, immediately  
unplug the cord. Do not use or attempt to repair the malfunctioning  
e g u r i d a d d e n i n g u n a m a n e r a .  
appliance.  
o n s u l t e c o n u n e l e c t r i c i s t a c a l i f i c a d o . N o i n t e n t e a l t e r a r e s t a m e d i -  
e c t a c o r r e c t a m e n t e e n e l t o m a c o r r i e n t e i n v i é r t a l a , s i n o c o n e c t a  
4. Do not leave this appliance unattended during use.  
e u n a s o l a m a n e r a e n u n t o m a c o r r i e n t e p o l a r i z a d o , s i l a c l a v i j a n o  
d e d e s c a r g a s e l é c t r i c a s , e s t a c l a v i j a e s t á d i s e ñ a d a p a r a c o n e c -  
c h a q u e l a o t r a ) , c o m o u n a m e d i d a d e s e g u r i d a d p a r a r e d u c i r e l  
e c t r o d o m é s t i c o p o s e e u n a c l a v i j a p o l a r i z a d a ( u n a d e s u s p a t a s e s  
POLARIZED PLUG  
This appliance has a polarized plug (one blade is wider than the other).  
To reduce the risk of electric shock, this plug is intended to fit into a polar-  
ized outlet only one way. If the plug does not fit fully in the outlet, reverse  
the plug. If it still does not fit, contact a qualified electrician. Do not  
a t e n d i d o e s t e p r o d u c t o d u r a n t e s u u s o .  
attempt to modify the plug in any way.  
t o .  
s c o n é c t e l o . N o t r a t e d e u t i l i z a r o r e p a r a r u n a p a r a t o  
u c t o e m p Ei e z La Ea f Cu n Tc i o Rn a Ir Cm a Pl d Ou r a Wn t e Es Ru u s o , i n m e d i -  
If the electrical circuit is overloaded with other appliances, your appliance  
e d e 1 2 7 V  
may not operate properly. It should be operated on a separate electrical  
e s t e p r o d u c t o d e b e r á c o n e c t a r s e s o l a m e n t e e n u n  
circuit from other appliances.  
y C u i d a d o a n t e s d e o p e r a r o l i m p i a r e l m i s m o .  
a r i o s d e e s t e a p a r a t o d e b e r á n l e e r y c o m p r e n d e r e s t a  
ELECTRICAL SPECIFICATIONS  
e s i o n e s a l a s p e r s o n a s o d a ñ o s a l a p r o p i e d a d .  
127V ~ 60Hz 1300W  
n e c e s a r i a s p a r a e v i t a r r i e s g o d e q u e m a d u r a s , i n c e n d i o s , u  
p e s d e v a p o r d u r a n t e s u u s o . D e b e r á n t o m a r s e l a s p r e c a u -  
N U T C E I S Ó : N E s t e a p a r a t o g e n e r a c a l o r  
P C O I R O N  
G D U I D R I D  
2
 
GETTING TO KNOW YOUR IRON  
PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS.  
Steam Button Positions:  
3
NO STEAM  
STEAM  
4
2
5
6
1
7
8
9
10  
11  
1. Water Fill Opening  
2. Steam Button  
7. Thermostat Light  
8. Water Tank  
3. Pivot Cord  
4. Selection Arrow  
5. Heel Rest  
9. Maximum Water Level Line  
10. Non-stick Soleplate  
11. Filler Cup (P/N 50761)  
6. Temperature Control Dial  
3
 
BEFORE FIRST USE  
l a n t e n , p l á n c h e l a s a l r e v é s .  
s p r e n d a s o s c u r a s , d e s e d a , a c e t a t o  
1. Remove all packaging materials from the Soleplate and the  
body of the Iron. Unwind and straighten the power cord.  
n c o n t a c t o c o n l a s p r e n d a s d e v e s t i r  
a d o s u a v e .  
5 c m d e d i s t a n c i a d e l a p r e n d a p a r a  
2. Flush the soleplate steam vents to ensure that no stain is  
transferred onto the fabric from residue possibly left in the  
l o , s o s t e n g a l a P l a n c h a d e v a p o r  
vents from the manufacturing process. (See USER MAINTE-  
g u n a p r e n d a h e c h a d e v e l l u d i l l o , f i e l -  
NANCE INSTRUCTIONS.)  
r e l t e j i d o .  
NOTE: When the Iron is used for the first time, you may notice a  
r a t u r a h a s t a q u e l a s a r r u g a s d e s a -  
slight amount of smoke; this is normal and will stop after a  
e n u n a c o s t u r a . I n c r e m e n t e g r a d -  
few minutes as the Iron continues to heat.  
a q u e n o r m a l m e n t e n o s e a v i s i b l e ,  
a b a j a y  
e g u r o d e l t i p o d e t e j i d o d e u n a p r e n -  
e n t e .  
~ Ironing Tips ~  
i z a n d o u n a p l a n c h a q u e s e e n c u e n -  
o r  
• For best results, check garment labels for the tempera-  
e m p e r a t u r a b a j a d e l a s q u e  
ture and steam setting recommended by the fabric  
r i m e r o l a s p r e n d a s d e v e s t i r q u e  
manufacturer.  
c o m e n d a d o p o r e l f a b r i c a n t e .  
• Always iron garments that require a low temperature  
v e s t i r p a r a s a b e r c u a l e s l a t e m p e r -  
first. This will prevent damage to garments by using an  
r e s r e s u l t a d o s , c o n s u l t e l a s e t i q u e t a s  
iron that is too hot.  
d e P l a n c h a d o ~  
• If you are unsure of a garment’s fabric content, start on  
a low setting and test the iron on an area of the gar-  
ment that does not show, such as a seam. Gradually  
increase the heat setting until wrinkles remove without  
damaging the fabric.  
d e u n o s m i n u t o s e n c u a n t o l a p l a n c h a s e  
a m e n t e h u m e a ; e s t o e s n o r m a l y d e j a r á d e  
• To freshen up garments made of velvet, felt, suede or  
e s u t i l i z a d a p o r p r i m e r a v e z , u s t e d  
velour, hold the steaming iron horizontally 2 inches  
(5cm) above the fabric for a gentle steaming. Make  
sure the iron does not come in contact with the fabric.  
• To prevent shine, iron dark garments or those made of  
N T E N I M I E N T  
a b r i c a c i ó n m a n c h e s u r o p a . ( V  
d e v a p o r p a r a e v i t a r q u e c u a l q u i e r r e s i d u o  
o s d e l v a p o r d e l a p l a c a d e p l a n c h a d o m e d i -  
silk, acetate or rayon inside out.  
e s e n r o l l e y e s t i r e e l c a b l e .  
a t e r i a l d e e m p a q u e d e l a P l a c a y d e l c u e r p o  
R A  
S D E U T I L I Z A R L A  
4
 
OPERATING INSTRUCTIONS  
USING AS A DRY IRON  
The Iron can be used on the dry setting with or without water in  
the Water Tank. However, it is best to avoid having water in the  
Water Tank while dry ironing.  
1. Turn the Temperature Control Dial to the “MIN” setting and  
make sure that the Steam Button is in the NO STEAM  
position.  
2. Stand the Iron in the vertical position (on its Heel Rest) on a  
heat resistant surface and plug into a 127V outlet.  
3. Turn the Temperature Control Dial to the desired setting.  
The red Thermostat Light will illuminate, indicating that the  
Iron is heating.  
NOTE: For best results, check garment labels for the tempera-  
ture setting recommended by the fabric manufacturer.  
4. Once the Iron has reached the set temperature, the red  
Thermostat Light will go off, indicating that the Iron is ready  
for use.  
NOTE: The red Thermostat Light will continue to cycle off and on  
during use as the Iron maintains the desired temperature.  
5. When changing from a higher temperature setting to a lower  
temperature setting, wait until the red Thermostat Light  
cycles on and then off again before ironing.  
6. When finished ironing, turn the Temperature Control Dial to  
the “MIN” position and unplug the Iron. Stand the Iron back  
in the vertical position (on its Heel Rest) and allow it to cool  
completely before cleaning or storing.  
WARNING: Never fill the Water Tank while the Iron is still hot.  
5
 
USING AS A STEAM IRON  
e s e a d a .  
a n t e s u u s o p a r a q u e l a P l a n c h a m a n t e n g a  
while steam ironing.  
The Temperature Control Dial must remain at the “MAX” setting  
e y  
1. Turn the Temperature Control Dial to the “MIN” setting and  
n c h a e s t á l i s t a p a r a u t i l i z a r s e .  
make sure that the Steam Button is in the NO STEAM  
position.  
L u z r o j a d e l  
P l a n c h a h a y a a l c a n z a d o l a t e m p e r a t u r a  
2. Make sure that the Iron is unplugged and has cooled com-  
a d o s p o r e l f a b r i c a n t e .  
pletely before filling.  
r p a r a v e r l a p o s i c i ó n d e t e m p e r a t u r a y  
a d o s , c h e q u e l a s e t i q u e t a s d e l a s  
CAUTION: IF THE IRON IS HOT, DO NOT FILL WITH WATER.  
3. Filling the Water Tank: Place the Iron in the horizontal  
i e n t e .  
d i c a n d o q u e l a P l a n c h a  
position (on its Soleplate). Using the Filler Cup provided,  
e L u z  
slowly pour water through the Water Fill Opening until the  
Water Tank is filled to the Maximum Water Level Line; DO  
NOT OVERFILL.  
c a l o r y c o n é c t e l a e n u n t o m a c o r r i e n t e  
b r e s u B a s e d e D e s c a n s o ) s o b r e u n a s u p e r -  
IMPORTANT: Use tap water or distilled water only. Do not  
o d s e i -  
use chemically descaled water or any other liquids.  
4. With the Water Tank full, stand the Iron in the vertical posi-  
c o n m u c h o s q u í m i c o s o c u a l q u i e r o t r o  
tion (on its Heel Rest) on a heat resistant surface and plug  
d e l a l l a v e o d e s t i l a d a s o l a m e n t e .  
into a 127V outlet.  
L E N E .  
5. Turn the Temperature Control Dial to the “MAX” setting. The  
n e a I n d i c a d o r a d e l N i v e l M á x i m o d e a g u a ;  
red Thermostat Light will illuminate, indicating that the Iron  
l O r i f i c i o h a s t a q u e e l D e p ó s i t o d e  
is heating.  
u e s e p r o p o r c i o n a , l e n t a m e n t e v i e r t a e l  
NOTE: For best results, check garment labels for the tempera-  
a l ( s o b r e s u P l a c a d e P l a n c h a d o ) . U t i l i c e l a  
ture and steam settings recommended by the fabric  
e p ó s i t o d e A g u a :  
manufacturer.  
6. Once the Iron has reached the set temperature, the red  
Ó N : S I L A  
Thermostat Light will go off, indicating that the Iron is ready  
a m e n t e a n t e s d e l l e n a r l a .  
for use.  
u e l a p l a n c h a e s t é d e s c o n e c t a d a y s e h a y a  
NOTE: The red Thermostat Light will continue to cycle off and on  
during use as the Iron maintains the desired temperature.  
e e l B o t ó n d e V  
7. Press the Steam Button into the STEAM position. Steam will  
e
be released continuously once the Iron is held in the hori-  
t r a s s e e n c u e n t r e p l a n c h a n d o c o n v a p o r  
zontal position.  
n e e c e r e n l a p o s i c i ó n  
C H A D O C O N V  
6
 
NOTE: Steam can be stopped by holding the Iron in the vertical  
position, or by pressing the Steam Button back into the NO  
STEAM position.  
CAUTION: AVOID COMING IN CONTACT WITH  
ESCAPING STEAM.  
8. When finished ironing, press the Steam Button into the NO  
STEAM position, turn the Temperature Control Dial to the  
“MIN” setting, and unplug the Iron. If necessary, empty the  
Water Tank (see “Emptying the Water Tank”). Stand the Iron  
back in the vertical position (on its Heel Rest) and allow it to  
cool completely before cleaning or storing.  
NOTE: The Water Tank should be emptied after each use.  
EMPTYING THE WATER TANK  
The Water Tank should be emptied after each use.  
1. After use, press the Steam Button into the NO STEAM posi-  
tion, turn the Temperature Control Dial to the “MIN” setting,  
and unplug the Iron.  
2. While the Iron is still warm, hold the Iron over a sink and  
turn the Iron upside down, allowing water to drain from the  
Water Fill Opening.  
3. Stand the Iron back in the vertical position (on its Heel  
Rest). The warmth of the Iron should dry out any remaining  
water.  
CAUTION: AVOID COMING IN CONTACT WITH WATER OR  
ESCAPING STEAM.  
7
 
USER MAINTENANCE  
INSTRUCTIONS  
This appliance requires little maintenance. It contains no user  
serviceable parts. Do not try to repair it yourself. Any servicing  
requiring disassembly must be preformed by a qualified appli-  
ance repair technician.  
CARE AND CLEANING  
CAUTION: Unplug the Iron from the electrical outlet and  
allow it to cool completely before cleaning and storing.  
n a p r e n d a v i e j a p a r a r e t i r a r c u a l q u i e r r e s i d -  
Never immerse the Iron in water or any other liquid.  
a d e n u e v o , p r e c a l i é n t e l a y m u e v a l a  
NOTE: Do not put any chemical cleaning agents or solvents in  
l i m p i a r l a .  
the Water Tank, or on any part of the Iron.  
e c e s a r i o , u t i l i c e u n a p e q u e ñ a c a n t i d a d d e  
f i c i e s e x t e r i o r e s d e l a P l a n c h a c o n u n t r a p o  
1. Moisten a soft cloth with a dab of vinegar to remove spots  
from the Soleplate. Take care not to scratch the non-stick  
coating.  
P l a c a , y a q u e e s t o s p u e d e n r a l l a r l a  
Ó N : N u n c a u t i l i c e e s t r o p a j o s o l i m p i a d o r e s a b r a -  
CAUTION: Never use scouring pads or abrasive cleaners on  
the Soleplate, as this may scratch the surface.  
a d h e r e n t e .  
c h a s d e l a P l a c a .  
2. Wipe the outside surfaces of the Iron with a damp cloth. If  
r a p o s u a v e c o n u n o s t o q u e s d e v i n a g r e  
necessary, use a small amount of mild detergent to clean.  
3. Before using again, preheat and move the iron over an old  
n e l D e p ó s i t o d e  
cloth several times to remove any residue from the  
p r o d u c t o d e l i m p i e z a q u í m i c o n i  
Soleplate.  
o .  
N u n c a s u m e r j a l a P l a n c h a e n a g u a o e n c u a l q u i e r  
e s e e n f r í e c o m p l e t a m e n t e a n t e s d e l i m p i a r l a y  
Ó N : D e s c o n e c t e l a P l a n c h a d e l t o m a c o r r i e n t e y  
D O Y  
g u n a r e p a r a c i ó n .  
s t e d m i s m o . R e c u r r a a u n t é c n i c o e s p e c i a l i z a d o s i  
c t o r e q u i e r e d e p o c o m a n t e n i m i e n t o . N o t r a t e d e  
E N I M I E N T  
R U C C I O N E S D E  
8
 
FLUSHING  
Flushing the iron is advised after every 5 uses or more regularly  
to prevent harmful mineral build-up that can clog the iron and  
prevent it from heating and steaming properly.  
1. With the Iron unplugged, turn the Temperature Control Dial  
to the “MIN” setting and press the Steam Button into the  
NO STEAM position. Make sure that the Iron has cooled  
completely.  
CAUTION: IF THE IRON IS HOT, DO NOT FILL WITH WATER.  
2. Filling the Water Tank: Place the Iron in the horizontal  
position (on its Soleplate). Using the Filler Cup provided,  
slowly pour water through the Water Fill Opening until the  
Water Tank is filled to the Maximum Water Level Line; DO  
NOT OVERFILL.  
IMPORTANT: Use tap water or distilled water only. DO NOT  
use chemically descaled water or any other liquids. DO  
NOT put any chemical cleaning agents or solvents into  
the Water Tank.  
3. With the Water Tank full, stand the Iron in the vertical posi-  
tion (on its Heel Rest) on a heat resistant surface and plug  
into a 127V outlet.  
4. Turn the Temperature Control Dial to the “MAX” setting. The  
red Thermostat Light will illuminate, indicating that the Iron is  
heating. Once the Iron has reached the set temperature, the  
red Thermostat Light will go off, indicating that the Iron is  
ready for use.  
5. Hold the Iron horizontally over a basin or bowl and press the  
Steam Button into the STEAM position -- steam will begin to  
flow through the Soleplate. Continue to hold the Iron in this  
position until the Water Tank is empty. Water and steam will  
flush the scale and dust through the Soleplate and into the  
basin.  
CAUTION: AVOID COMING IN CONTACT WITH  
ESCAPING STEAM.  
9
 
6. When the Water Tank is empty, press the Steam Button into  
the NO STEAM position, turn the Temperature Control Dial  
to the “MIN” setting, and unplug the Iron. Stand the Iron  
back in the vertical position (on its Heel Rest) and allow it to  
cool completely before storing.  
STORING THE IRON  
Remove the cord from the outlet by grasping the plug -- never  
pull on the cord. Empty the Water Tank after each use (see  
“Emptying the Water Tank”). Allow the Iron to cool completely  
before storing. To protect the Soleplate, stand the Iron in an  
upright position on its Heel Rest; wrap the cord loosely around  
the base of the Iron.  
c o r d ó n l i g e r a m e n t e a l r e d e d o r d e l a B a s e d e l a  
q u e l a p l a n c h a v e r t i c a l s o b r e s u b a s e d e d e s c a n s o ;  
o m p l e t a m e n t e a n t e s d e g u a r d a r l a .  
o d e  
ó n  
r d ó n d e l t o m a c o r r i e n t e s o s t e n i e n d o l a c l a v i j a - -  
C E N A J E D E L A  
r l a .  
s o ) y p e r m i t a q u e s e e n f r í e c o m p l e t a m e n t e  
p l a n c h a e n p o s i c i ó n v e r t i c a l ( s o b r e s u  
o s i c i ó n “ M I N ” , y d e s c o n e c t e l a P l a n c h a .  
n S I N V  
s i t o d e  
Ó N : E V I T E E L  
o .  
a r á n a t r a v é s d e l a P l a c a d e P l a n c h a d o  
d e  
n i e n d o l a P l a n c h a e n e s t a p o s i c i ó n h a s t a  
e m p e z a r á a f l u i r a t r a v é s d e l a p l a c a .  
e l B o t ó n d e V  
n c h a e n f o r m a h o r i z o n t a l s o b r e e l l a v a b o o  
10  
 
LIMITED ONE-YEAR WARRANTY  
Office and Service Center: Toastmaster de México, S.A. de C.V.  
Centeotl #223-A  
Col. Industrial San Antonio,  
Delegación Azcapotzalco, México. D.F. C.P. 02760  
Ph: 01800-201-3373 or 3375  
Fax: 52(55) 5353-7207 EXT. 115  
Warranty: This product is warranted against defects in materials or workmanship for a  
period of (1) year from the original purchase date.  
Warranty Coverage: This warranty is void if the product has been damaged by accident  
in shipment, unreasonable use, misuse, neglect, improper service, commercial use,  
repairs by unauthorized personnel, normal wear, improper assembly, installation or  
maintenance abuse or other causes not arising out of defects in materials or workman-  
ship. This warranty is effective only if the product is purchased and operated in MEXI-  
CO, and does not extend to any units which have been used in violation of written  
instructions furnished with the product or to units which have been altered or modified or  
to damage to products or parts thereof which have had the serial number removed,  
altered, defaced or rendered illegible.  
Implied Warranties: ANY IMPLIED WARRANTIES WHICH THE PURCHASER MAY  
HAVE ARE LIMITED IN DURATION TO ONE (1) YEAR FROM THE DATE OF PUR-  
CHASE. Some States do not allow limitations on how long an implied warranty lasts, so  
the above limitation may not apply to you.  
Warranty Performance: During the above one-year warranty period, a product with a  
defect will be either repaired or replaced with a similar model, as long as you notified to  
the following number: 01800-201-3373. The repaired or replacement product will be in  
warranty for the balance of the one-year warranty period and an additional one-month  
period. No charge will be made for such repair or replacement.  
Important Notice: If there are missing parts or are defective, return this product to the  
place you bought it. You should call the CONSUMER SERVICE, stating that you are a  
consumer with a problem at the phone number: 01800-201-3373 or 3375.  
Limitation of Remedies: No representative or person is authorized to assume for us,  
any other liability in connection with the sale of our products. There shall be no claims  
for defects or failure of performance or product failure under any theory of damages,  
contract or commercial law including, but not limited to negligence, gross negligence,  
strict liability, breach of warranty and breach of contract. Repair, replacement or refund  
shall be the sole remedy of the purchaser under this warranty. Some states do not allow  
the exclusion or limitation of incidental or consequential damages, so the above limita-  
tion or exclusion may not apply to you.  
For more information on our products, visit our website: www.maxim-toastmaster.com.  
©2006 All rights reserved.  
Made in China  
1/07  
 

Technicolor Thomson Stereo System RS2600 User Manual
Tektronix Drums vx4380 User Manual
Tektronix Sander TDS 500D User Manual
Traulsen Refrigerator VPS114S User Manual
TRENDnet Modem TFM PCIV92A User Manual
TRENDnet Router TEW 691GR 101 User Manual
Triarch Indoor Furnishings 75250 14 User Manual
Troy Bilt Blower TB4BP User Manual
Vinotemp Refrigerator VT 34GS User Manual
Walker Lawn Mower MBSSD User Manual