DIGITAL MATRIX MIXER
M-9000
■ Ambient Noise Control— automatically increase or reduce
output levels in response to changes in ambient noise.
DESCRIPTION
The TOA M-9000 Series Digital Matrix Mixer features a
compact design that fits in a two rack space package. The
versatile new Mixer is ideal for multi-zone paging, music
distribution and room-combining applications.
■ Multi-function Display allows programming and operation
without a PC.
■ Rack-mount Kit Included (2RU)
The M-9000 includes eight module ports allowing designers to
easily configure custom systems with up to eight mic/line inputs
and eight outputs. The M-9000 chassis has two channels of
built-in digital signal processing (DSP) with ten band parametric
EQ, compressor, eight level ducking and more. Input and
output modules provide additional DSP.
Two discrete operation modes, "Mixer" and "Matrix", allow the
M-9000 to be used in both simple mixing and complex multi-
zone paging applications. Versatile features include telephone
zone paging, automatic microphone mixing and ambient noise
control.
Modules include the D-001T dual channel mic/line input
module, T-001T dual channel line output module, ZP-001T
telephone access zone paging module, C-001T control
expansion module, and AN-001T Ambient Noise Control
module. Accessories include the AN-9001 ceiling/wall-mount
microphone, ZM-9001 and ZM-9002 remote panels, and
SS-9001 4-zone speaker selector.
Flexible Remote Control
■
Two Remote Volume ControlTerminals
• Assignable to any input or output channel
• Control with 10k ohm linear potentiometer, 0-10 VDC or optional
ZM-9001/ZM-9002 remote panels
• Assign remote volume control to background music (Priority 8)
inputs without affecting paging input volume
■
Four Control Inputs (expandable to twelve with C-001T module)–
programmable to activate Memory, Volume Up/Down, Mute, Power On/Off,
Emergency Mute
■
Four Control Outputs (expandable to twelve with C-001T module) –
programmable to activate external relays synchronized with Memory,
Channel On/Off and Power On/Off
■
RS-232 Port
• Control protocol available for external devices (see protocol for
controllable parameters)
• AMX and Crestron control modules available
Additional Features
■
Software Utility for saving unit parameters to PC,updating unit firmware,
virtual control activation and status indication
■
MS Excel ProgrammingTemplates – use Microsoft(R) Excel for off-site
programming
■
Keylock Security sets password-protected access to Input,
Output, Utility & Power functions
SYSTEM FEATURES
■
Input and Output Metering (D-001T module(s) required for input
metering)
■ Modular Digital Matrix Mixer for a multitude of applications
including audio-visual, zone paging, room combining and
many more.
■
Alphanumeric Channel and Memory Naming
Power On Memory sets the Event/Scene selected when unit powers up
Detachable AC Cable
■
■
■ Dual Modes (MIXER and MATRIX) — two separate feature
sets to suit both simple mixing and complex multi-zone
distribution applications.
■ Easy to Configure and Operate
■ Exceptional Audio Quality
•24-bit, 48 kHz sampling
•Low Distortion - 0.008%
Rear View
482
466
420
■ Modular System— up to 8 mic/line inputs and 8 outputs.
■ Dual Channel Digital Signal Processor (DSP):
•10-Band Parametric EQ
•High and Low Pass Filters
•Compressor
•Loudness Contour
Front View
353
335
•Bass and Treble
14
•Delay (MIXER mode)
•TOA Speaker EQ Presets
•Additional DSP included on D-001T and T-001T modules
■ Telephone Zone Paging— access up to eight zones with
optional ZP-001T module
Side View
unit: mm
SS-9001
Speaker Selector
ZM-9001
Remote Panel
The SS-9001 is a speaker selector used with the ZP-001T zone paging
module. It outputs 2 input signals to 4 different zones.
The ZM-9001 is a remote control switch panel used with the M-9000. It
provides an additional 6 control inputs of amplifier expansion, and can be
mounted in an American standard 1-gang electrical box in the wall.
Power Source
Supplied from the optional AD-246 AC adapter or an
external 24 V DC/200 mA power supply.
Applicable Cable
Line Resistance
Terminal
Single conductor shielded cable
Under 50 Ω (per line)
M3 screw terminal, distance between barriers: 7.62 mm
Current Consumption
Control Signal
120 mA
No-voltage make contact nput (polarized),
open voltage: 24 V DC, short-circuit current: 3 mA
Operating Temperature
Finish
Dimensions
Weight
-10°C to +40°C
Control Power
Speaker Terminal
Control Terminal
Operating Temperature
Finish
Under 240 W (70 V line)
Removable terminal block (2 pins)
Removable terminal block (10 pins)
-10°C to +40°C
Case: Surface-treated steel plate
112 (W) × 197 (H) × 30 (D) mm
530 g
Surface-treated steel plate, white, paint
72 (W) × 127 (H) × 45 (D) mm
170 g
Accessory
Box mounting screw × 2, Panel mounting screw × 2
Note: Since no electrical box is supplied with the unit, prepare it separately.
Dimensions
Weight
72
33
45
37
Accessory
Removable terminal plug (2 pins) × 6, Removable terminal
plug (10 pins) × 1, Cord clamp × 1, Mounting screw × 4
32.6
Option
AC adapter: AD-246
6
Front view
without panel
Unit: mm
1-gang electrical box
(not supplied)
38
42
46 – 50
Figure when mounted
Dimensions of mounting opening
1
18
70
112
18
If the opening is too small or too large, the
ZM-9001 cannot be mounted in the wall.
Be sure to make an opening with
30
Unit: mm
dimensions given above when mounting.
Ambient Noise Sensing
Microphone
AN-9001
ZM-9002
Remote Panel
The ZM-9002 is a remote control switch/volume panel used with the
M-9000. It adds 4 amplifier control inputs and 1 remote volume control,
and can be mounted in an American Standard 1-gang electrical box in
the wall.
The AN-9001 is an electret condenser microphone designed for ambient
noise sensing. It is used in conjunction with the AN-001T Ambient Noise
control module in the M-9000. It can be mounted in an American
Standard 1-gang electrical box in the ceiling or wall.
Applicable Cable
Line Resistance
Terminal
Operating Temperature
Finish
Dimensions
Weight
Accessory
Single conductor shielded cable
Under 50 Ω (per line)
M3 screw terminal, distance between barriers: 7.62 mm
Type
Electret condenser microphone
14-26 V DC
Phantom Power
Current Consumption
Directivity
7 mA (at 24 V DC)
-10°C to +40°C
Omnidirectional (hemispherical)
Surface-treated steel plate, white, paint
72 (W) × 127 (H) × 56 (D) mm
170 g
Impedance
200 Ω
Rated Sensitivity
Frequency Response
Output Terminal
Operating Temperature
Finish
-5 dB (1 kHz, 0 dB = 1 V/Pa)
100-10,000 Hz
Box mounting screw × 2, Panel mounting screw × 2
Removable terminal block (3 pins)
-10°C to +40°C
Panel: ABS resin, white
Note: Since no electrical box is supplied with the unit, prepare it separately.
Frame, Case: Surface-treated steel plate
72
33
56
37
Dimensions
Weight
ø130 × 37 (D) mm
32.6
170 g
Accessory
Removable terminal plug (3 pins) × 1,
Box mounting screw (No.6-32UNC x 30) × 2,
Box mounting screw (M4 x 30) × 2
Option
9000 series plug-in module: AN-001T
Note: Since no electrical box is supplied with the unit, prepare it separately.
Front View
without panel
6
Unit: mm
1-gang electrical box
(not supplied)
38
42
31
37
46 – 50
Figure when mounted
Dimensions of mounting opening
1-gang electrical box
(not supplied)
If the opening is too small or too large,
the ZM-9002 cannot be mounted in the
wall. Be sure to make an opening with
dimensions given above when mounting.
38
42
46 – 50
Figure when
mounted
Dimensions of mounting
opening
If the opening is too small or
too large, the AN-9001
cannot be mounted in the
ceiling or wall. Be sure to
make an opening with
dimensions given above
when mounting.
70
Front view
without panel
Unit: mm
Dual Line Output Expansion
Dual Mic/Line Input
T-001T Module with DSP
D-001TModule with DSP
The T-001T is a plug-in module designed for use with the M-9000
and provide two independent balanced outputs. It can drive load
of 600Ω up to +16dB. It can process effect for TONE/EQ/
COMPRESSOR to two inputs independently.
The D-001T is a plug-in module designed for use with the M-9000 and
can provide two independent balanced inputs. The D-001T can handle
signals ranging from microphone level to line level by controlling their
input sensitivity in 9 increments from -60dB to -10dB.
Phantom power (+24V) can be supplied for condenser microphone use.
The D-001T can process effect for TONE/EQ/COMPRESSOR to two
inputs independently.
Power Source
Current Consumption
Output
+24 V DC, -24 V DC, +6 V DC
35 mA (at +24 V DC), 35 mA (at -24 V DC), 60 mA (at +6 V DC)
2 channels, max. +20 dB* (at 10 kΩ load), 600 Ω,
electronically-balanced, removable terminal block (3 pins)
Power Source
Current Consumption
Input
+24 V DC, -24 V DC, +6 V DC
Frequency Response
20-20,000 Hz, +1, -3 dB
20 mA (at +24 V DC), 20 mA (at -24 V DC), 60 mA (at +6 V DC)
Total Harmonic Distortion + N 0.005% (at 1 kHz, 20 – 20,000 Hz BPF, 5 V output, 10 kΩ load)
S/N Ratio
2 channels, 3 kΩ (when the phantom power is ON)/
10 kΩ (when the phantom power is OFF),
electronically-balanced, removable terminal block (3 pins)
Over 73 dB (at 20 – 20,000 Hz BPF )
Under -91 dB (at 20 – 20,000 Hz BPF, VOL: -70 dB)
Over 87 dB (at 20 kHz)
Residual Noise
Crosstalk
D/A Converter
Sampling Frequency
Tone Control
Input Sensitivity
Frequency Response
-60, -54, -48, -42, -36, -30, -24, -18, -10 dB* (selectable)
20 – 20,000 Hz, +1, -3 dB
24 bit ∆∑DAC
48 kHz
Total Harmonic Distortion + N 0.008% (at 1 kHz, 20-20,000 Hz BPF, Input sensitivity: -10 dB)
Input Equivalent Noise
S/N Ratio
Crosstalk
Under -112 dB (at 20 – 20,000 Hz BPF, Input short, Input sensitivity: -60 dB)
Over 73 dB (at 20 – 20,000 Hz BPF, Input short, Input sensitivity: -10 dB)
Over 75 dB (at 20 kHz, Input sensitivity: -10 dB)
Over 62 dB (at 1 kHz, Input sensitivity: -60 dB)
24 bit ∆∑ADC
Bass: 12 dB (at 100 Hz), Treble: 12 dB (at 10 kHz)
Parametric Equalizer
10 bands, Frequency: 20-20,000 Hz, 31 steps,
Variable range: 12 dB, Q: 0.3-5
CMRR
Speaker Equalizer
High-pass Filter
Low-pass Filter
Compressor
Delay
Operating Temperature
Finish
Dimensions
Weight
15 (compatible with TOA speakers only)
-12 dB/oct, Variable frequency range: 20 – 400 Hz, 14 steps
-12 dB/oct, Variable frequency range: 4,000 – 20,000 Hz, 8 steps
Depth: 1-5
A/D Converter
Sampling Frequency
Tone Control
48 kHz
Bass: 12 dB (at 100 Hz), Treble: 12 dB (at 10 kHz)
Parametric Equalizer
10 bands, Frequency: 20 – 20,000 Hz, 31 steps,
Variable range: 12 dB, Q: 0.3-5
0-40 ms (1 ms step), maximum 40 ms (CH 1 + CH2), mixer mode only
-10°C to +40°C
Panel: Aluminum, hair-line
High-pass Filter
Low-pass Filter
Compressor
Phantom Power
Operating Temperature
Finish
-12 dB/oct, Variable frequency range: 20 – 400 Hz, 14 steps
-12 dB/oct, Variable frequency range: 4,000 – 20,000 Hz, 8 steps
35 (W) × 78 (H) × 91.5 (D) mm
82 g
Depth: 1 – 5
+24 V DC
Accessory
*0 dB = 1 V
Removable terminal plug (3 pins) × 2, Module mounting screw × 2
-10°C to +40°C
Panel: Aluminum, hair-line
Dimensions
Weight
35 (W) × 78 (H) × 91.5 (D) mm
82 g
Input/Output Control
Module
Accessory
*0 dB = 1 V
Removable terminal plug (3 pins) × 2, Module mounting screw × 2
C-001T
The C-001T is Control I/O expansion module designed for use with the
M-9000 and can provide up to 8 channels each of input and output
expansion. Since the main unit has 4 preinstalled inputs and outputs
each, the control input and output can be expanded to up to 12
channels each when the C-001T is used.
Ambient Noise
AN-001TController Module
The AN-001T is a plug-in module of 2-channel ambient noise detector
designed for use with the M-9000.
Power Source
Current Consumption
Control Input
6 V DC
15 mA
It automatically adjusts the output volume in response to the change of
ambient noise level.The AN-001T can handle input signals from microphone
level (-60dB) to line level (-10dB) by controlling the gain in 9 steps.
Phantom power (+24V) can be supplied for condenser microphone use.
8 channels, open voltage: 3.3 V DC, short-circuit
current: under 1 mA, removable terminal block (9 pins)
Control Output
8 channels, open collector output, withstand voltage: 27 V DC,
control current: max. 50 mA, removable terminal block (9 pins)
Operating Temperature
Finish
Dimensions
Weight
-10°C to +40°C
Panal: Aluminum, hair-line
Power Source
Current Consumption
Input
+24 V DC, -24 V DC, +6 V DC
20 mA (at +24 V DC), 20 mA (at -24 V DC), 60 mA (at +6 V DC)
35 (W) × 78 (H) × 91.5 (D) mm
62 g
Sensor input (Ambient noise sensor microphone input):
2 channels, 3 kΩ (when the phantom power is ON)/10 kΩ
(when the phantom power is OFF), electronically-balanced,
removable terminal block (3 pins)
Accessory
Removable terminal plug (9 pins) × 2, Module mounting screw × 2
Input Sensitivity
Phantom Power
A/D Converter
Sampling Frequency
Ambient Noise Control
Function
-60, -54, -48, -42, -36, -30, -24, -18, -10 dB* (selectable)
+24 V DC
24 bit ∆∑ADC
48 kHz
Telephone Zone
Paging Module
ZP-001T
Sensor input reference level adjustment function
Maximum output signal level control: -15 to 0 dB
Minimum output signal level control: -18 to -3 dB
The ZP-001T is a zone paging module designed for use with the M-9000
and functions as interface to connect the M-9000 to an analog PABX,
allowing zone paging to be initiated from the PABX. There are two
operation modes: ring signal and paging port modes.
Sample time setting: 10 s, 15 s, 20 s, 30 s, 1 min, 2 min, 3 min, 5 min
Gain ratio setting (Ambient noise: Output signal level):
6:3, 5:3, 4:3, 3:3, 3:4, 3:5, 3:6, 6:-3, 5:-3, 4:-3, 3:-3, 3:-4, 3:-5, 3:-6,
Operating Temperature
Finish
-10°C to +40°C
Panel: Aluminum, hair-line
Broadcast can be initiated regardless of operation mode.
Dimensions
Weight
Accessory
Option
35 (W) × 78 (H) × 91.5 (D) mm
82 g
Power Source
+24 V DC, +6 V DC
Current Consumption
Number of Line
Type of Selectable Signal
Signaling System
TEL Line
38 mA (at +24 V DC), 18 mA (at +6 V DC)
1 line
Removable terminal plug (3 pins) × 2, Module mounting screw × 2
Ceiling mount microphone: AN-9001
DTMF signal
*0 dB = 1 V
Loop-Start (or Ground-Start, selectable)
0 dB, 600 Ω, balanced, transformer-isolated, loop voltage:
24 V DC or more which should be supplied from the PABX, RJ11 connector
Paging Input
Control Input
Control Output
0 dB, 600Ω, balanced, transformer-isolated audio input,
removable terminal block (4 pins)
1 channel, no-voltage make contact, open voltage: 5 V DC,
short-circuit current: 0.5 mA, removable terminal block (4 pins)
4 channels, open collector output (isolated), withstand voltage: 35 V DC,
control current: max. 50 mA, removable terminal block (4 pins)
Operating Temperature
Finish
-10°C to +40°C
Pael: Aluminum, hair-line
Dimensions
Weight
35 (W) × 78 (H) × 91.5 (D) mm
153 g
Accessory
Removable terminal plug (4 pins) × 3, Module mounting screw × 2
TOA Corporation
Specifications are subject to change without notice.
Printed in Japan (0612) 833-52-377-40 u
|