Synopsys Network Card 640 pin Generic Device Adapter User Manual

Using the ModelSource  
640-pin Generic Device  
Adapter  
To search the entire manual  
set, press this toolbar button.  
For help, refer to intro.pdf.  
Release R3.6b  
November 2001  
 
 
The ModelSource 640-pin Adapter  
Contents  
Contents  
Chapter 1  
Chapter 2  
Chapter 3  
Chapter 4  
November 2001  
Synopsys, Inc.  
3
 
The ModelSource 640-pin Adapter  
Preface  
Preface  
About This Application Note  
This application note describes the features and use of the ModelSource640-pin  
Generic Device Adapter (hereafter referred to as the “Adapter”), which allows you to  
model a 640-pin device using ModelSource modeling systems.  
This application note assumes that you are familiar with model-building procedures as  
described in these Synopsys documents:  
Related Documents  
To see a complete listing, refer to the Guide to Hardware Modeling Documents.  
Manual Overview  
This manual contains the following chapters and appendixes:  
Preface  
Describes the application note and lists the  
typographical conventions and symbols used in it; tells  
how to get technical assistance.  
Describes the hardware and software needed to create a  
Logic Model using the 640-pin Generic Device Adapter.  
November 2001  
Synopsys, Inc.  
5
 
       
Preface  
The ModelSource 640-pin Adapter  
Provides specifications for building the 640-pin Adapter  
Daughterboard.  
Describes the Adapter and provides a procedure for  
connecting it and the Daughterboard.  
Briefly outlines software development tasks and  
provides references.  
Describes mounting the Adapter onto the Modeling  
Systems; labeling the Daughterboard; verifying the  
model; and unmounting the Adapter.  
Provides a pinout listing for J1-J6 connectors.  
Typographical and Symbol Conventions  
Default UNIX prompt  
Represented by a percent sign (%).  
User input (text entered by the user)  
Shown in bold type, as in the following command line example:  
% cd $LMC_HOME/hdl  
System-generated text (prompts, messages, files, reports)  
Shown as in the following system message:  
No Mismatches: 66 Vectors processed: 66 Possible  
Variables for which you supply a specific value  
Shown in italic type, as in the following command line example:  
% setenv LMC_HOME prod_dir  
In this example, you substitute a specific name for prod_dir when you enter the  
command.  
Command syntax  
Choice among alternatives is shown with a vertical bar ( | ) as in the following  
syntax example:  
-effort_level low | medium | high  
In this example, you must choose one of the three possibilities: low, medium, or  
high.  
6
Synopsys, Inc.  
November 2001  
 
 
The ModelSource 640-pin Adapter  
Preface  
Optional parameters are enclosed in square brackets ( [ ] ) as in the following  
syntax example:  
pin1 [pin2 ... pinN]  
In this example, you must enter at least one pin name (pin1), but others are optional  
( [pin2 ... pinN]).  
Getting Help  
If you have a question while using Synopsys products, use the following resources:  
1. Start with the available product documentation installed on your network or located  
at the root level of your Synopsys CD-ROM. Every documentation set contains  
overview information in the intro.pdf file.  
Additional Synopsys documentation is available at this URL:  
Datasheets for models are available using the Model Directory:  
2. Visit the online Support Center at this URL:  
This site gives you access to the following resources:  
SOLV-IT!, the Synopsys automated problem resolution system  
product-specific FAQs (frequently asked questions)  
lists of supported simulators and platforms  
the ability to open a support help call  
the ability to submit a delivery request for some product lines  
3. If you still have questions, you can call the Support Center:  
North American customers:  
Call the Synopsys Eaglei and Logic Modeling Products Support Center hotline at  
1-800-445-1888 (or 1-503-748-6920) from 6:30 AM to 5 PM Pacific Time, Monday  
through Friday.  
International customers:  
Call your local sales office.  
November 2001  
Synopsys, Inc.  
7
 
 
Preface  
The ModelSource 640-pin Adapter  
The Synopsys Website  
General information about Synopsys and its products is available at this URL:  
Comments?  
To report errors or make suggestions, please send e-mail to:  
To report an error that occurs on a specific page, select the entire page (including  
headers and footers), and copy to the buffer. Then paste the buffer to the body of your  
e-mail message. This will provide us with information to identify the source of the  
problem.  
8
Synopsys, Inc.  
November 2001  
 
   
The ModelSource 640-pin Adapter  
Chapter 1: Describing a 640-pin Logic Model  
1
Describing a 640-pin Logic Model  
This chapter describes the necessary components and provides a procedural summary  
for building a 640-pin Logic Model.  
Hardware Requirements  
To build a complete 640-pin Logic Model using the 640-pin Adapter, you need the  
following hardware:  
The device you want to model, henceforth referred to as the device under test  
(DUT). The DUT can have up to 640 input, output, and I/O signals, exclusive of  
supply voltage and auxiliary signals. The DUT can include more than one physical  
package, as long as the components fit within an area approximately 6” x 6”.  
One 640-pin Generic Device Adapter Daughterboard, henceforth referred to as the  
“Daughterboard”, to which you attach the DUT.  
Four ModelSource modeling systems, either 4 MS3200 units or 4 MS3400 units.  
You cannot mix these two types of units.  
One 640-pin Adapter, which provides the interface between the modeling systems  
and the Daughterboard.  
November 2001  
Synopsys, Inc.  
9
 
     
Chapter 1: Describing a 640-pin Logic Model  
The ModelSource 640-pin Adapter  
Software Requirements  
To support the 640-pin Logic Model, you need the following software:  
User-created Shell Software files, described in the Shell Software Reference  
Manual.  
The product-specific Shell Software files GEN640.ADP and GEN640.PKG,  
provided by Synopsys and described in later text.  
R3.3b or later of the Runtime Modeler Software.  
The lm utility, R3.3b or later, for labeling the Daughterboard.  
Procedural Summary  
The steps in building a 640-pin Logic Model are as follows:  
1. Build the Daughterboard and attach the DUT to it.  
2. Connect the Daughterboard to the Adapter.  
3. Develop the model Shell Software.  
4. Mount the Adapter onto the ModelSource modeling systems.  
5. Label the Daughterboard.  
6. Verify the model.  
Steps 1, 2 and 4 are described in detail in this application note. Steps 3, 5, and 6 are  
summarized here; for more details, refer to the Logic Model Development Manual.  
10  
Synopsys, Inc.  
November 2001  
 
   
The ModelSource 640-pin Adapter  
Chapter 2: Building the Daughterboard  
2
Building the Daughterboard  
This chapter describes the specifications you must meet when building the  
Daughterboard.  
Daughterboard Description  
Figure 1 shows the physical specifications of the Daughterboard from the component  
side. The Daughterboard is designed to have a footprint area in excess of 10” by 14”,  
allowing for a multi-chip DUT.  
Following are descriptions of some of the items shown on the drawing. All connectors  
are to be installed from the far side.  
Guide pin holes: These are designed to mate with the guide pins on the Adapter to  
ensure correct orientation when attaching the Daughterboard to the Adapter.  
Board stiffeners: Four (two long and two short) are required around the perimeter of  
the Daughterboard to reinforce it. Fabrication drawings for compatible long and  
short stiffeners are provided in Figure 3 on page 15.  
Connectors J1-J6: These are to be installed from the far side, and are designed to  
mate with corresponding connectors on the Adapter. The location of Pin A1 of each  
connector is indicated on the drawing. Details of the connector pins are provided in  
text that follows.  
November 2001  
Synopsys, Inc.  
11  
 
     
Chapter 2: Building the Daughterboard  
The ModelSource 640-pin Adapter  
Figure 1: 640-pin Adapter Daughterboard  
12  
Synopsys, Inc.  
November 2001  
 
 
The ModelSource 640-pin Adapter  
Chapter 2: Building the Daughterboard  
Connector Pin Detail  
Connectors J1–J6 include the connections (DUT1–DUT640) between the DUT and the  
Adapter through the Daughterboard and, in addition, supply voltage, ground  
connections, and various auxiliary signals. Figure 2 shows details of J1–J6 connector  
pins, from the component side. Pinouts are listed in “J1–J6 Connector Pinouts” on  
Connectors J1 and J3  
These connectors include two each of Teradyne signal modules, and have 6 rows of 48  
pins each. You will notice in Appendix A that no connections are listed for Rows B and  
E; these are exclusively ground.  
Connectors J2, J4, J5 and J6  
These connectors include one each of Teradyne signal modules (A1–F24, at the left of  
the figure) and two each of Teradyne power modules (AP1–FP4 and AP5–FP8, at the  
right of the figure). As with connectors J1 and J3, the left (signal module) side has rows  
B and E exclusively connected to ground. The right (power module) side has no rows B,  
C, or E.  
November 2001  
Synopsys, Inc.  
13  
 
     
Chapter 2: Building the Daughterboard  
The ModelSource 640-pin Adapter  
Connectors J1 and J3  
One Teradyne  
Signal Module  
One Teradyne  
Signal Module  
1
24  
48  
A
B
C
D
E
F
Rows B and E are connected to ground  
Connectors J2, J4, J5 and J6  
One Teradyne  
Two Teradyne  
Signal Module  
Power Modules  
1
24  
AP1  
AP8  
DP8  
A
B
C
D
E
F
DP1  
FP1  
FP8  
Rows B and E are  
connected to ground  
Rows B, C, and E  
do not exist  
Figure 2: Connector Pin Detail, Shown from Component Side  
Parts List  
The required parts are as follows:  
Eight Teradyne HDM signal modules, 488-5324-XXX. These are available either as  
press fit or solder tail, in a variety of tail lengths. The last three digits (XXX) of the  
part number depend on which type you choose; for specific part numbers, see the  
Teradyne product documentation.  
Eight Teradyne HDM power modules, 437-5034-500. These are currently available  
only as solder tail.  
Twelve Southco retractable screw fasteners, 47-65-221-70.  
To mount the stiffeners:  
Fourteen 4-40 1/4” pan head Phillips screws  
14  
Synopsys, Inc.  
November 2001  
 
   
The ModelSource 640-pin Adapter  
Chapter 2: Building the Daughterboard  
Fourteen #4 lock washers  
Fourteen #4 flat washers  
One EEProm, Catalyst semiconductor CAT93C86.  
Note  
The above does not include the package type designation; that is up to the  
model designer.  
Two Synopsys board stiffeners (short), 600-00193 (or build according to  
specifications).  
Two Synopsys board stiffeners (long), 600-00XXX (or build according to  
specifications).  
Figure 3 shows a drawing of the short and long board stiffeners.  
Short Stiffener  
Long Stiffener  
Figure 3: Fabrication Drawing of Board Stiffeners  
Requirements  
You must locate the connectors and guide pin holes exactly as shown in Figure 1 on  
page 12, so that the Daughterboard will fit onto the Adapter.  
The height of the DUT above the Daughterboard must not exceed 2.25 inches.  
November 2001  
Synopsys, Inc.  
15  
 
   
Chapter 2: Building the Daughterboard  
The ModelSource 640-pin Adapter  
The DUT signal traces (DUT1 through DUT640) are controlled impedance, and  
must be 93 ohms ± 10%. (All other signals are uncontrolled but will function  
correctly at 93 ohms.)  
You must make the following specific connections:  
J1-A1 to J1-F48 (SEAT1)  
J2-A1 to J2-F24 (SEAT2)  
J3-A1 to J3-F48 (SEAT3)  
J4-A1 to J4-F24 (SEAT4)  
J5-A1 to J5-F24 (SEAT5)  
J6-A1 to J6-F24 (SEAT6)  
(These connections pass a daisychain signal through all four J connectors to allow  
the ModelSource system to detect whether or not the Adapter is seated correctly.)  
You must provide a series termination of 4.7 ohms within 1 inch of the DUT’s signal  
pins. Use as small a surface mount package as can practically be mounted.  
Routing Guidelines  
Provide connections for your DUT device(s) on the Daughterboard. Route the DUT  
signals (DUT1 through DUT640) and other appropriate signals to the J connector pins  
according to the pinout listing in “J1–J6 Connector Pinouts” on page 29.  
The following are some guidelines:  
For optimal pattern clock rates, ensure that all DUT signals are the same length, or  
nearly so (within 0.5 inch).  
Use either microstrip (preferred) or stripline for the signal layers, but do not mix  
them, because their propagation velocities are different. Use microstrip if the signal  
routing fits on two layers; use stripline if the signal routing requires more than two  
layers.  
For ease of testing, create test points for the following signals:  
J1-D17 (KEEPALIVE)  
J1-A15 (TRIGGER)  
J1-A19 (PLAY)  
J1-A17 (SAMPLE)  
Any voltages used by the DUT  
16  
Synopsys, Inc.  
November 2001  
 
 
The ModelSource 640-pin Adapter  
Chapter 2: Building the Daughterboard  
J4-FP5–J4-FP8 (FANP12V), if used  
DUT signal used for DUT clock  
You can connect to any of the available power supplies listed in Table 1. Do not  
interconnect different power supplies.  
Table 1: Available Power Supplies  
Pins  
Signal  
P5V  
Power Supply  
+5V DC, 6A max  
J2-AP5–J2-AP8  
J4-AP5–J4-AP8  
J2-AP1–J2-AP4  
J4-AP1–J4-AP4  
J4-FP1–J4-FP4  
J2-FP5–J2-FP8  
J4-FP5–J4-FP8  
ADJVCC1  
ADJVCC2  
M5V  
+3-5V DC, 6A max  
+3-5V DC, 6A max  
-5.2V DC, 400mA max  
+12V DC, 400mA max  
P12V  
FANP12V  
+12V DC, 400mA max (for  
fan/heat sink only)  
For bypass/decoupling capacitors, follow the DUT manufacturer’s  
recommendations, if provided; otherwise, use the following guidelines:  
For each supply of P5V, ADJVCC1 or ADJVCC2, provide 47µF, 16V tantalum  
(use two of these, if space permits).  
For each supply of P12V, M5V, provide 10µF, 16V tantalum.  
For bypass, for every 25 signal pins, place a pair of 0.1µF and 0.01µF high  
frequency X7R or NPO capacitors directly underneath the device, if possible, or  
around the perimeter of the device.  
November 2001  
Synopsys, Inc.  
17  
 
 
Chapter 2: Building the Daughterboard  
The ModelSource 640-pin Adapter  
18  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Chapter 3: Connecting the Daughterboard  
3
Connecting the Daughterboard  
This section describes the Adapter and gives instructions for interconnecting it and the  
Daughterboard.  
Adapter Description  
Figure 4 shows a drawing of the Adapter. The items of interest to the user are as follows:  
Connectors that mate with Daughterboard connectors J1–J6  
Ejectors for disconnecting the Daughterboard from the Adapter  
Guide pins that fit the Daughterboard guide pin holes to ensure correct orientation  
Test points for the signals TRIGGER, KEEPALIVE, PLAY, FEEDBACK,  
SAMPLE, ADJVCC1, +5V, -5V, and GND  
November 2001  
Synopsys, Inc.  
19  
 
     
Chapter 3: Connecting the Daughterboard  
The ModelSource 640-pin Adapter  
Ejector  
Guide  
Pin  
Mates  
with J3  
Mates  
with J4  
Test  
Points  
Mates  
with J6  
Mates  
with J5  
Mates  
with J2  
Mates  
with J1  
Test  
Points  
Test  
Points  
Ejector  
Figure 4: The 640-pin Generic Device Adapter  
20  
Synopsys, Inc.  
November 2001  
 
 
The ModelSource 640-pin Adapter  
Chapter 3: Connecting the Daughterboard  
Procedures  
Caution  
Do not connect or disconnect the Daughterboard to or from the Adapter  
while the Adapter is mounted on the ModelSource modeling systems.  
To connect the Daughterboard to the Adapter, follow these steps:  
1. Remove the lid from the Adapter.  
2. Set the Daughterboard on the Adapter, engaging the guide pins through the guide  
pin holes.  
3. Push firmly to seat.  
4. Hand-tighten each of the Southco retractable screw fasteners.  
5. Replace the Adapter lid.  
To disconnect the Daughterboard from the Adapter, follow these steps:  
1. Remove the lid from the Adapter.  
2. Loosen the Southco retractable screw fasteners.  
3. Push the ejectors on the Adapter.  
4. Carefully lift the Daughterboard from the Adapter.  
5. Replace the Adapter lid.  
November 2001  
Synopsys, Inc.  
21  
 
 
Chapter 3: Connecting the Daughterboard  
The ModelSource 640-pin Adapter  
22  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Chapter 4: Developing the Shell Software  
4
Developing the Shell Software  
The Shell Software file requirements for a 640-pin Logic model are similar to those for  
standard Logic Models, and are summarized here. For more information, see the Shell  
User-Generated Files  
As for all Generic Device Adapters, you must create one or more Shell Software files  
that contain DUT-specific information, such as pinouts, device names, propagation  
delays, timing checks.  
Files Provided by Synopsys  
The Adapter Mapping (.ADP) file, GEN640.ADP: This file provides signal  
mapping between the Adapter and the ModelSource modeling system. You should  
be able to use this file without modification.  
A template Package Mapping (.PKG) file, GEN640.PKG: The .PKG file provides  
signal mapping between the Daughterboard and the DUT; the template file contains  
Daughterboard pin names mapped to duplicate pin names, for those pins used for  
DUT signals. You create the custom .PKG file by editing the template and replacing  
the duplicate pin names with your DUT pin names.  
November 2001  
Synopsys, Inc.  
23  
 
       
Chapter 4: Developing the Shell Software  
The ModelSource 640-pin Adapter  
Figure 5 shows part of the template GEN640.PKG file provided by Synopsys.  
{*******************************************************************}  
{* Copyright (c) 2001by Synopsys, Incorporated  
{*All rights reserved.  
*}  
*}  
{*******************************************************************}  
{* Logic Model PACKAGE map file for Generic 640 Device Adapter. *}  
{*******************************************************************}  
{ package_map_revision A *}  
{*******************************************************************}  
package_mapping  
J1A2 = J1A2  
J1A3 = J1A3  
J1A4 = J1A4  
J1A5 = J1A5  
J1A6 = J1A6  
J1A7 = J1A7  
J1A8 = J1A8  
J1A9 = J1A9  
J1A10 = J1A10  
J1A11 = J1A11  
J1A12 = J1A12  
J1A13 = J1A13  
J1A21 = J1A21  
J1A22 = J1A22  
J1A23 = J1A23  
J1A24 = J1A24  
J1A25 = J1A25  
Figure 5: Partial GEN640.PKG File  
To customize this file for your DUT, you replace the first name on each line with the  
name of the appropriate signal on your DUT.  
For example, you change the first line  
J1A2 = J1A2  
to  
DUTpname = J1A2  
24  
Synopsys, Inc.  
November 2001  
 
 
The ModelSource 640-pin Adapter  
Chapter 5: Completing the Model  
5
Completing the Model  
This chapter describes the tasks needed to complete the model: mounting the Adapter  
onto the Modeling Systems, labeling the Daughterboard, and verifying the model. It also  
describes how to unmount the Adapter from the Modeling Systems.  
Mounting the Adapter onto the ModelSource  
Modeling Systems  
To mount the Adapter onto the ModelSource modeling systems, follow these steps:  
1. Make a stack of four MS3200 or four MS3400 modeling systems (do not mix these  
two modeling systems). Connect the modeling systems together as described in  
“Chapter 2: Installation” in the ModelSource Users Manual.  
Note  
Do not stack the modelings systems more than four high. Ensure that the  
surface on which the modelers are stacked is flat and rigid.  
2. Place the base of the Adapter against the front of the sets of four connected  
modeling systems, hanging the Adapter’s hook receptacles on the positioning hooks  
of the modeling systems. Pull the Adapter gently towards you to make sure that it is  
securely balanced on the hooks.  
3. Seat the modeling boards in the ModelSource modeling systems onto the Adapter as  
described in the following paragraph.  
Each modeling system has a knob on the right and on the left side for moving the  
top and bottom modeling boards, respectively, backwards and forwards. Turn each  
knob individually counterclockwise to bring each modeling board forward to  
connect with the Adapter.  
November 2001  
Synopsys, Inc.  
25  
 
     
Chapter 5: Completing the Model  
The ModelSource 640-pin Adapter  
Labeling the Daughterboard  
After you have completed the Shell Software and mounted the Adapter and  
Daughterboard onto the ModelSource modeling systems, you must verify the  
Daughterboard’s label and update it if necessary.  
Note  
Ensure that the Daughterboard is seated on the Adapter before you verify  
and update the label. If the daughterboard is not seated, the software will  
report the label as “GEN640”, the label of the Adapter itself.  
If it is necessary to update the Daughterboard’s label, use the lm Label Device Adapter  
utility to change the adapter’s label to the device_name used in the model’s Shell  
Software. For more details, refer to “Label Device Adapter“ in the ModelSource Users  
Manual.  
Verifying the Model  
After you have developed the model, you must verify it. For more information, see the  
Note  
The pattern memory available for simulation is limited to the smallest  
amount of available memory on any one of the eight modeling boards in the  
four modelers.  
26  
Synopsys, Inc.  
November 2001  
 
   
The ModelSource 640-pin Adapter  
Chapter 5: Completing the Model  
Unmounting the Adapter from the  
ModelSource Modeling Systems  
To remove the Adapter from the ModelSource modeling systems, follow these steps:  
1. Ensure that the Adapter is not currently in use (that is, the In Use LEDs are not  
illuminated).  
2. Turn each knob individually clockwise, to unseat each modeling board connector  
from the Adapter.  
3. Verify that the “Seated LED” on each modeling board is no longer illuminated.  
4. Push the Adapter so that it is flush against the front panel of the modeling system  
assembly, and slide it up as far as you can.  
5. Pull the Adapter straight out and away from the modeling system assembly.  
November 2001  
Synopsys, Inc.  
27  
 
 
Chapter 5: Completing the Model  
The ModelSource 640-pin Adapter  
28  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
A
J1–J6 Connector Pinouts  
The pinouts for connectors J1 through J6 of the 640-pin Adapter and the Daughterboard  
are listed in Table 2. Do not use pins that are labeled RESERVED.  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
A1  
Signal  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
SEAT1  
A2  
DUT171  
DUT173  
DUT170  
DUT169  
DUT168  
DUT167  
DUT166  
DUT165  
DUT164  
DUT163  
DUT162  
DUT161  
NC  
A3  
A4  
A5  
A6  
A7  
A8  
A9  
A10  
A11  
A12  
A13  
A14  
A15  
TRIGGER  
November 2001  
Synopsys, Inc.  
29  
 
     
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
A16  
A17  
A18  
A19  
A20  
A21  
A22  
A23  
A24  
A25  
A26  
A27  
A28  
A29  
A30  
A31  
A32  
A33  
A34  
A35  
A36  
A37  
A38  
A39  
A40  
NC  
SAMPLE  
NC  
PLAY  
NC  
DUT198  
DUT197  
DUT196  
DUT202  
DUT194  
DUT193  
DUT192  
DUT191  
DUT190  
DUT189  
DUT188  
DUT187  
DUT186  
DUT185  
DUT226  
DUT225  
DUT224  
DUT223  
DUT222  
DUT221  
30  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
A41  
A42  
A43  
A44  
A45  
A46  
A47  
A48  
C1  
Signal  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
DUT220  
DUT219  
DUT218  
DUT217  
DUT237  
DUT215  
DUT214  
DUT213  
NC  
C2  
DUT172  
DUT174  
DUT175  
DUT176  
DUT177  
DUT178  
DUT179  
DUT180  
DUT181  
DUT182  
DUT183  
DUT184  
NC  
C3  
C4  
C5  
C6  
C7  
C8  
C9  
C10  
C11  
C12  
C13  
C14  
C15  
C16  
C17  
NC  
NC  
TEMP  
November 2001  
Synopsys, Inc.  
31  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
C18  
C19  
C20  
C21  
C22  
C23  
C24  
C25  
C26  
C27  
C28  
C29  
C30  
C31  
C32  
C33  
C34  
C35  
C36  
C37  
C38  
C39  
C40  
C41  
C42  
NC  
NC  
NC  
DUT199  
DUT200  
DUT201  
DUT195  
DUT203  
DUT204  
DUT205  
DUT206  
DUT207  
DUT208  
DUT209  
DUT210  
DUT211  
DUT212  
DUT227  
DUT228  
DUT229  
DUT230  
DUT231  
DUT232  
DUT233  
DUT234  
32  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
C43  
C44  
C45  
C46  
C47  
C48  
D1  
Signal  
DUT235  
DUT236  
DUT216  
DUT238  
DUT239  
DUT240  
DUT11  
DUT13  
DUT10  
DUT9  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
D2  
D3  
D4  
D5  
DUT8  
D6  
DUT7  
D7  
DUT6  
D8  
DUT5  
D9  
DUT4  
D10  
D11  
D12  
D13  
D14  
D15  
D16  
D17  
D18  
D19  
DUT3  
DUT2  
DUT1  
NC  
NC  
FEEDBACK  
NC  
KEEPALIVE  
NC  
NC  
November 2001  
Synopsys, Inc.  
33  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
D20  
D21  
D22  
D23  
D24  
D25  
D26  
D27  
D28  
D29  
D30  
D31  
D32  
D33  
D34  
D35  
D36  
D37  
D38  
D39  
D40  
D41  
D42  
D43  
D44  
DUT38  
DUT37  
DUT36  
DUT42  
DUT34  
DUT33  
DUT32  
DUT31  
DUT30  
DUT29  
DUT28  
DUT27  
DUT26  
DUT25  
DUT66  
DUT65  
DUT64  
DUT63  
DUT62  
DUT61  
DUT60  
DUT59  
DUT58  
DUT57  
DUT77  
34  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
D45  
D46  
D47  
D48  
F1  
Signal  
DUT55  
DUT54  
DUT53  
NC  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
DUT12  
DUT14  
DUT15  
DUT16  
DUT17  
DUT18  
DUT19  
DUT20  
DUT21  
DUT22  
DUT23  
DUT24  
NC  
F2  
F3  
F4  
F5  
F6  
F7  
F8  
F9  
F10  
F11  
F12  
F13  
F14  
F15  
F16  
F17  
F18  
F19  
F20  
F21  
EEOUT  
EEIN  
EECLK  
EEPE  
EESEL  
EEVCC  
DUT39  
DUT40  
November 2001  
Synopsys, Inc.  
35  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
F22  
F23  
F24  
F25  
F26  
F27  
F28  
F29  
F30  
F31  
F32  
F33  
F34  
F35  
F36  
F37  
F38  
F39  
F40  
F41  
F42  
F43  
F44  
F45  
F46  
Signal  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
J1  
DUT41  
DUT35  
DUT43  
DUT44  
DUT45  
DUT46  
DUT47  
DUT48  
DUT49  
DUT50  
DUT51  
DUT52  
DUT67  
DUT68  
DUT69  
DUT70  
DUT71  
DUT72  
DUT73  
DUT74  
DUT75  
DUT76  
DUT56  
DUT78  
DUT79  
36  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
F47  
F48  
Signal  
DUT80  
SEAT1  
J1  
J1  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
A1  
SEAT2  
A2  
DUT160  
DUT159  
DUT158  
DUT136  
DUT156  
DUT155  
DUT154  
DUT153  
DUT152  
DUT151  
DUT150  
DUT149  
DUT148  
DUT147  
DUT132  
DUT131  
DUT130  
DUT129  
DUT128  
DUT127  
NC  
A3  
A4  
A5  
A6  
A7  
A8  
A9  
A10  
A11  
A12  
A13  
A14  
A15  
A16  
A17  
A18  
A19  
A20  
A21  
A22  
November 2001  
Synopsys, Inc.  
37  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
A23  
A24  
C1  
Signal  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
NC  
NC  
NC  
C2  
DUT133  
DUT134  
DUT135  
DUT157  
DUT137  
DUT138  
DUT139  
DUT140  
DUT141  
DUT142  
DUT143  
DUT144  
DUT145  
DUT146  
DUT105  
DUT106  
DUT107  
DUT108  
DUT109  
DUT110  
NC  
C3  
C4  
C5  
C6  
C7  
C8  
C9  
C10  
C11  
C12  
C13  
C14  
C15  
C16  
C17  
C18  
C19  
C20  
C21  
C22  
C23  
NC  
38  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
C24  
D1  
Signal  
NC  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
NC  
D2  
DUT91  
DUT93  
DUT90  
DUT89  
DUT88  
DUT87  
DUT86  
DUT85  
DUT84  
DUT83  
DUT82  
DUT81  
DUT118  
DUT117  
DUT116  
DUT122  
DUT114  
DUT113  
DUT112  
DUT111  
NC  
D3  
D4  
D5  
D6  
D7  
D8  
D9  
D10  
D11  
D12  
D13  
D14  
D15  
D16  
D17  
D18  
D19  
D20  
D21  
D22  
D23  
D24  
NC  
NC  
November 2001  
Synopsys, Inc.  
39  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
F1  
Signal  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
NC  
F2  
DUT92  
DUT94  
DUT95  
DUT96  
DUT97  
DUT98  
DUT99  
DUT100  
DUT101  
DUT102  
DUT103  
DUT104  
DUT119  
DUT120  
DUT121  
DUT115  
DUT123  
DUT124  
DUT125  
DUT126  
NC  
F3  
F4  
F5  
F6  
F7  
F8  
F9  
F10  
F11  
F12  
F13  
F14  
F15  
F16  
F17  
F18  
F19  
F20  
F21  
F22  
F23  
F24  
AP1  
NC  
SEAT2  
ADJVCC1  
40  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
ADJVCC1  
ADJVCC1  
ADJVCC1  
P5V  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
J2  
AP2  
AP3  
AP4  
AP5  
AP6  
AP7  
AP8  
DP1  
DP2  
DP3  
DP4  
DP5  
DP6  
DP7  
DP8  
FP1  
FP2  
FP3  
FP4  
FP5  
FP6  
FP7  
FP8  
P5V  
P5V  
P5V  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
NC  
NC  
NC  
NC  
P12V  
P12V  
P12V  
P12V  
J3  
A1  
SEAT3  
November 2001  
Synopsys, Inc.  
41  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
A2  
Signal  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
DUT640  
DUT639  
DUT638  
DUT616  
DUT636  
DUT635  
DUT634  
DUT633  
DUT632  
DUT631  
DUT630  
DUT629  
DUT628  
DUT627  
DUT612  
DUT611  
DUT610  
DUT609  
DUT608  
DUT607  
DUT606  
DUT605  
DUT604  
DUT603  
DUT595  
A3  
A4  
A5  
A6  
A7  
A8  
A9  
A10  
A11  
A12  
A13  
A14  
A15  
A16  
A17  
A18  
A19  
A20  
A21  
A22  
A23  
A24  
A25  
A26  
42  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
A27  
A28  
A29  
A30  
A31  
A32  
A33  
A34  
A35  
A36  
A37  
A38  
A39  
A40  
A41  
A42  
A43  
A44  
A45  
A46  
A47  
A48  
C1  
DUT601  
DUT600  
DUT599  
NC  
RESERVED (AD13)  
RESERVED (AD7)  
RESERVED (AD5)  
RESERVED (AD0)  
RESERVED (-ACK)  
NC  
DUT584  
DUT583  
DUT582  
DUT581  
DUT580  
DUT579  
DUT578  
DUT577  
DUT576  
DUT575  
DUT574  
DUT572  
NC  
C2  
DUT613  
C3  
DUT614  
November 2001  
Synopsys, Inc.  
43  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
C4  
Signal  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
DUT615  
DUT637  
DUT617  
DUT618  
DUT619  
DUT620  
DUT621  
DUT622  
DUT623  
DUT624  
DUT625  
DUT626  
DUT585  
DUT586  
DUT587  
DUT588  
DUT589  
DUT590  
DUT591  
DUT592  
DUT593  
DUT594  
DUT602  
DUT596  
DUT597  
C5  
C6  
C7  
C8  
C9  
C10  
C11  
C12  
C13  
C14  
C15  
C16  
C17  
C18  
C19  
C20  
C21  
C22  
C23  
C24  
C25  
C26  
C27  
C28  
44  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
C29  
C30  
C31  
C32  
C33  
C34  
C35  
C36  
C37  
C38  
C39  
C40  
C41  
C42  
C43  
C44  
C45  
C46  
C47  
C48  
D1  
Signal  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
DUT598  
NC  
RESERVED (AD11)  
RESERVED (AD12)  
RESERVED (AD6)  
RESERVED (AD2)  
RESERVED (-WR)  
NC  
DUT561  
DUT562  
DUT563  
DUT564  
DUT565  
DUT566  
DUT567  
DUT568  
DUT569  
DUT570  
DUT573  
DUT571  
DUT480  
D2  
DUT479  
D3  
DUT478  
D4  
DUT456  
D5  
DUT476  
November 2001  
Synopsys, Inc.  
45  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
D6  
DUT475  
DUT474  
DUT473  
DUT472  
DUT471  
DUT470  
DUT469  
DUT468  
DUT467  
DUT452  
DUT451  
DUT450  
DUT449  
DUT448  
DUT447  
DUT446  
DUT445  
DUT444  
DUT443  
DUT435  
DUT441  
DUT440  
DUT439  
NC  
D7  
D8  
D9  
D10  
D11  
D12  
D13  
D14  
D15  
D16  
D17  
D18  
D19  
D20  
D21  
D22  
D23  
D24  
D25  
D26  
D27  
D28  
D29  
D30  
RESERVED (AD10)  
46  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
D31  
D32  
D33  
D34  
D35  
D36  
D37  
D38  
D39  
D40  
D41  
D42  
D43  
D44  
D45  
D46  
D47  
D48  
F1  
Signal  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
RESERVED (AD9)  
RESERVED (AD3)  
RESERVED (AD4)  
RESERVED (-RD)  
NC  
DUT424  
DUT423  
DUT422  
DUT421  
DUT420  
DUT419  
DUT418  
DUT417  
DUT416  
DUT415  
DUT414  
DUT412  
NC  
DUT453  
F2  
DUT454  
F3  
DUT455  
F4  
DUT477  
F5  
DUT457  
F6  
DUT458  
F7  
DUT459  
November 2001  
Synopsys, Inc.  
47  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
F8  
Signal  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
DUT460  
F9  
DUT461  
F10  
F11  
F12  
F13  
F14  
F15  
F16  
F17  
F18  
F19  
F20  
F21  
F22  
F23  
F24  
F25  
F26  
F27  
F28  
F29  
F30  
F31  
F32  
DUT462  
DUT463  
DUT464  
DUT465  
DUT466  
DUT425  
DUT426  
DUT427  
DUT428  
DUT429  
DUT430  
DUT431  
DUT432  
DUT433  
DUT434  
DUT442  
DUT436  
DUT437  
DUT438  
NC  
RESERVED (AD14)  
RESERVED (AD8)  
RESERVED (AD1)  
48  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
F33  
F34  
F35  
F36  
F37  
F38  
F39  
F40  
F41  
F42  
F43  
F44  
F45  
F46  
F47  
F48  
Signal  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
J3  
RESERVED (AD15)  
RESERVED (-AS)  
NC  
DUT401  
DUT402  
DUT403  
DUT404  
DUT405  
DUT406  
DUT407  
DUT408  
DUT409  
DUT410  
DUT413  
DUT411  
SEAT3  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
A1  
A2  
A3  
A4  
A5  
A6  
A7  
A8  
SEAT4  
DUT560  
DUT559  
DUT558  
DUT536  
DUT556  
DUT555  
DUT554  
November 2001  
Synopsys, Inc.  
49  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
A9  
Signal  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
DUT553  
DUT552  
DUT551  
DUT550  
DUT549  
DUT548  
DUT547  
DUT532  
DUT531  
DUT530  
DUT529  
DUT528  
DUT527  
NC  
A10  
A11  
A12  
A13  
A14  
A15  
A16  
A17  
A18  
A19  
A20  
A21  
A22  
A23  
A24  
C1  
NC  
NC  
NC  
C2  
DUT533  
DUT534  
DUT535  
DUT557  
DUT537  
DUT538  
DUT539  
DUT540  
C3  
C4  
C5  
C6  
C7  
C8  
C9  
50  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
C10  
C11  
C12  
C13  
C14  
C15  
C16  
C17  
C18  
C19  
C20  
C21  
C22  
C23  
C24  
D1  
Signal  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
DUT541  
DUT542  
DUT543  
DUT544  
DUT545  
DUT546  
DUT505  
DUT506  
DUT507  
DUT508  
DUT509  
DUT510  
NC  
NC  
NC  
NC  
D2  
DUT491  
DUT493  
DUT490  
DUT489  
DUT488  
DUT487  
DUT486  
DUT485  
DUT484  
D3  
D4  
D5  
D6  
D7  
D8  
D9  
D10  
November 2001  
Synopsys, Inc.  
51  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
D11  
D12  
D13  
D14  
D15  
D16  
D17  
D18  
D19  
D20  
D21  
D22  
D23  
D24  
F1  
Signal  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
DUT483  
DUT482  
DUT481  
DUT518  
DUT517  
DUT516  
DUT522  
DUT514  
DUT513  
DUT512  
DUT511  
NC  
NC  
NC  
NC  
F2  
DUT492  
DUT494  
DUT495  
DUT496  
DUT497  
DUT498  
DUT499  
DUT500  
DUT501  
DUT502  
F3  
F4  
F5  
F6  
F7  
F8  
F9  
F10  
F11  
52  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
F12  
F13  
F14  
F15  
F16  
F17  
F18  
F19  
F20  
F21  
F22  
F23  
F24  
AP1  
AP2  
AP3  
AP4  
AP5  
AP6  
AP7  
AP8  
DP1  
DP2  
DP3  
DP4  
DUT503  
DUT504  
DUT519  
DUT520  
DUT521  
DUT515  
DUT523  
DUT524  
DUT525  
DUT526  
NC  
NC  
SEAT4  
ADJVCC2  
ADJVCC2  
ADJVCC2  
ADJVCC2  
P5V  
P5V  
P5V  
P5V  
GND  
GND  
GND  
GND  
November 2001  
Synopsys, Inc.  
53  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
J4  
DP5  
DP6  
DP7  
DP8  
FP1  
FP2  
FP3  
FP4  
FP5  
FP6  
FP7  
FP8  
GND  
GND  
GND  
GND  
M5V  
M5V  
M5V  
M5V  
FANP12V  
FANP12V  
FANP12V  
FANP12V  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
A1  
A2  
SEAT5  
DUT400  
DUT399  
DUT398  
DUT376  
DUT396  
DUT395  
DUT394  
DUT393  
DUT392  
DUT391  
DUT390  
A3  
A4  
A5  
A6  
A7  
A8  
A9  
A10  
A11  
A12  
54  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
A13  
A14  
A15  
A16  
A17  
A18  
A19  
A20  
A21  
A22  
A23  
A24  
C1  
Signal  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
DUT389  
DUT388  
DUT387  
DUT372  
DUT371  
DUT370  
DUT369  
DUT368  
DUT367  
NC  
NC  
NC  
NC  
C2  
DUT373  
DUT374  
DUT375  
DUT397  
DUT377  
DUT378  
DUT379  
DUT380  
DUT381  
DUT382  
DUT383  
DUT384  
C3  
C4  
C5  
C6  
C7  
C8  
C9  
C10  
C11  
C12  
C13  
November 2001  
Synopsys, Inc.  
55  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
C14  
C15  
C16  
C17  
C18  
C19  
C20  
C21  
C22  
C23  
C24  
D1  
Signal  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
DUT385  
DUT386  
DUT345  
DUT346  
DUT347  
DUT348  
DUT349  
DUT350  
NC  
NC  
NC  
NC  
D2  
DUT331  
DUT333  
DUT330  
DUT329  
DUT328  
DUT327  
DUT326  
DUT325  
DUT324  
DUT323  
DUT322  
DUT321  
DUT358  
D3  
D4  
D5  
D6  
D7  
D8  
D9  
D10  
D11  
D12  
D13  
D14  
56  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
D15  
D16  
D17  
D18  
D19  
D20  
D21  
D22  
D23  
D24  
F1  
Signal  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
DUT357  
DUT356  
DUT362  
DUT354  
DUT353  
DUT352  
DUT351  
NC  
NC  
NC  
NC  
F2  
DUT332  
DUT334  
DUT335  
DUT336  
DUT337  
DUT338  
DUT339  
DUT340  
DUT341  
DUT342  
DUT343  
DUT344  
DUT359  
DUT360  
F3  
F4  
F5  
F6  
F7  
F8  
F9  
F10  
F11  
F12  
F13  
F14  
F15  
November 2001  
Synopsys, Inc.  
57  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
F16  
F17  
F18  
F19  
F20  
F21  
F22  
F23  
F24  
AP1  
AP2  
AP3  
AP4  
AP5  
AP6  
AP7  
AP8  
DP1  
DP2  
DP3  
DP4  
DP5  
DP6  
DP7  
DP8  
DUT361  
DUT355  
DUT363  
DUT364  
DUT365  
DUT366  
NC  
NC  
SEAT5  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
58  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
J5  
FP1  
FP2  
FP3  
FP4  
FP5  
FP6  
FP7  
FP8  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
A1  
SEAT6  
A2  
DUT320  
DUT319  
DUT318  
DUT296  
DUT316  
DUT315  
DUT314  
DUT313  
DUT312  
DUT311  
DUT310  
DUT309  
DUT308  
DUT307  
DUT292  
A3  
A4  
A5  
A6  
A7  
A8  
A9  
A10  
A11  
A12  
A13  
A14  
A15  
A16  
November 2001  
Synopsys, Inc.  
59  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
A17  
A18  
A19  
A20  
A21  
A22  
A23  
A24  
C1  
Signal  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
DUT291  
DUT290  
DUT289  
DUT288  
DUT287  
NC  
NC  
NC  
NC  
C2  
DUT293  
DUT294  
DUT295  
DUT317  
DUT297  
DUT298  
DUT299  
DUT300  
DUT301  
DUT302  
DUT303  
DUT304  
DUT305  
DUT306  
DUT265  
DUT266  
C3  
C4  
C5  
C6  
C7  
C8  
C9  
C10  
C11  
C12  
C13  
C14  
C15  
C16  
C17  
60  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
C18  
C19  
C20  
C21  
C22  
C23  
C24  
D1  
Signal  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
DUT267  
DUT268  
DUT269  
DUT270  
NC  
NC  
NC  
NC  
D2  
DUT251  
DUT253  
DUT250  
DUT249  
DUT248  
DUT247  
DUT246  
DUT245  
DUT244  
DUT243  
DUT242  
DUT241  
DUT278  
DUT277  
DUT276  
DUT282  
DUT274  
D3  
D4  
D5  
D6  
D7  
D8  
D9  
D10  
D11  
D12  
D13  
D14  
D15  
D16  
D17  
D18  
November 2001  
Synopsys, Inc.  
61  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
D19  
D20  
D21  
D22  
D23  
D24  
F1  
Signal  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
DUT273  
DUT272  
DUT271  
NC  
NC  
NC  
NC  
F2  
DUT252  
DUT254  
DUT255  
DUT256  
DUT257  
DUT258  
DUT259  
DUT260  
DUT261  
DUT262  
DUT263  
DUT264  
DUT279  
DUT280  
DUT281  
DUT275  
DUT283  
DUT284  
F3  
F4  
F5  
F6  
F7  
F8  
F9  
F10  
F11  
F12  
F13  
F14  
F15  
F16  
F17  
F18  
F19  
62  
Synopsys, Inc.  
November 2001  
 
The ModelSource 640-pin Adapter  
Appendix A: J1–J6 Connector Pinouts  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
Signal  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
J6  
F20  
F21  
F22  
F23  
F24  
AP1  
AP2  
AP3  
AP4  
AP5  
AP6  
AP7  
AP8  
DP1  
DP2  
DP3  
DP4  
DP5  
DP6  
DP7  
DP8  
FP1  
FP2  
FP3  
FP4  
DUT285  
DUT286  
NC  
NC  
SEAT6  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
NC  
NC  
NC  
NC  
November 2001  
Synopsys, Inc.  
63  
 
Appendix A: J1–J6 Connector Pinouts  
The ModelSource 640-pin Adapter  
Table 2: Pinouts for Connectors J1-J6  
Connector  
Pin  
FP5  
FP6  
FP7  
FP8  
Signal  
J6  
J6  
J6  
J6  
RESERVED  
RESERVED  
RESERVED  
RESERVED  
64  
Synopsys, Inc.  
November 2001  
 

Shure Clothes Dryer M367 User Manual
Snapper Snow Blower 10302 User Manual
Sonance Portable Speaker AS2 User Manual
Sony Camcorder CCD TR66 8 User Manual
Sony Digital Camera TX100V User Manual
Sony Portable CD Player D EJ250 User Manual
Sony Video Game Console PS2 User Manual
Speed Queen Clothes Dryer HE4430 User Manual
StarTechcom Laptop RACKCONV1701 User Manual
Sylvania CRT Television C6432TD User Manual