Pelco Paint Sprayer HS2400 User Manual

®
HS2400  
Indoor Enclosure  
Installation/  
Operation Manual  
C1470M (9/97)  
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150  
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120  
 
1.0 GENERAL  
1.1 IMPORTANT SAFEGUARDS AND WARNINGS  
Prior to installation and use of this product, the following WARNINGS should be  
observed.  
1. Installation and servicing should only be done by Qualified Service Personnel  
and conform to all Local codes.  
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or  
6P enclosure, it is designed for indoor use only and it must not be installed  
where exposed to rain and moisture.  
3. Only use replacement parts recommended by Pelco.  
4. After replacement/repair of this unit’s electrical components, conduct a resis-  
tance measurement between line and exposed parts to verify the exposed  
parts have not been connected to line circuitry.  
5. The installation method and materials should be capable of supporting four  
(4) times the weight of the enclosure, pan/tilt, camera and lens combination.  
The product and/or manual may bear the following marks:  
This symbol indicates that dangerous voltage constituting a  
risk of electric shock is present within this unit.  
This symbol indicates that there are important operating and  
maintenance instructions in the literature accompanying this  
unit.  
CAUTION:  
RISK OF  
ELECTRIC SHOCK.  
DO NOT OPEN.  
CAUTION:  
TO REDUCE THE RISK OF ELECTRICAL SHOCK,  
DO NOT REMOVE COVER. NO USER-  
SERVICEABLE PARTS INSIDE. REFER SERVICING  
TO QUALIFIED SERVICE PERSONNEL.  
Please thoroughly familiarize yourself with the information  
in this manual prior to installation and operation.  
Pelco Manual C1470M (9/97)  
1
 
1.2 UNPACKING INSTRUCTIONS  
Unpack and inspect all parts carefully.  
The following parts are supplied:  
1
1
1
1
1
Camera enclosure  
5/32-inch tamper-resistant hex key  
1/4-20 x .5" bolt  
1/4" flat washer  
1/4" split lock washer  
Be sure to save the shipping carton and any inserts. They are the safest material in  
which to make future shipments.  
If an item appears to have been damaged in shipment, replace it properly in its  
carton and contact the factory at 1-800-289-9100 or 1-559-292-1981 for a replace-  
ment. (International customers fax 1-559-348-1120 for authorization and instruc-  
tions.)  
If an item needs to be returned to the factory for repair, consult the WARRANTY  
AND RETURN section of this manual for instructions.  
1.3 RECOMMENDED TOOLS  
Pelco does not supply basic tools needed for the installation process. The following  
tools are recommended:  
Hand tools  
Drill  
Coaxial cable stripper  
BNC crimp tool  
Wire cutter  
Wire stripper  
2
Pelco Manual C1470M (9/97)  
 
2.0 DESCRIPTION  
The HS2400 medium-security camera housing provides a low-cost, tamper-resistant  
corner mount for fixed camera applications. The HS2400 is designed to be installed  
flush against a ceiling. The smaller frontal area and reduced overall size create an  
unobtrusive enclosure that is ideal for today’s smaller cameras. The HS2400 will  
accommodate Pelco box cameras with vari-focal lenses that do not exceed 8 inches  
(20.32 cm) in total length. Three conduit knockouts allow wires to be brought into  
the housing from the rear sides or the top.  
Pelco Manual C1470M (9/97)  
3
 
3.0 INSTALLATION  
Before mounting the HS2400, make certain that the mounting surface is capable of  
supporting four (4) times the weight of the enclosure plus camera and lens.  
Determine the location of the enclosure and means of delivering all necessary ca-  
bling before beginning the installation process. Knockouts that will accommodate  
1/2-inch (1.27 cm) conduit have been provided on both wall mounting surfaces and  
the ceiling surface.  
3.1 FLUSH CEILING OR MID-WALL CORNER MOUNT  
To install the HS2400:  
1. Remove the two (2) tamper-resistant screws on the underside of the housing  
(using the hex key that is provided) and separate the cover from the mounting  
bracket. Remove the tilt table assembly.  
2. Using the mounting bracket as a template, mark on the mounting surface  
eight holes for mounting the enclosure and, as required, holes for cabling. Drill  
the holes.  
3. Attach the enclosure with eight 1/4-20 fasteners (not supplied).  
4. Route cabling to the enclosure. Refer to Table A for the type of video coaxial  
cable to use. If your camera will use 24 VAC power, refer to Table B to deter-  
mine the size of wire to use. If you are using conduit, attach it to the enclosure.  
5. Mount the camera and lens to the tilt table assembly with the 1/4" bolt, flat  
washer and split locker washer that are provided. Install the completed as-  
sembly onto the mounting bracket.  
6. Make all camera and lens connections and adjust the tilt table assembly and  
camera lens as necessary.  
7. Replace the cover. Check that all components clear the cover and that cam-  
era angle and lens adjustments are satisfactory. When all adjustments are  
complete, secure the cover with the hex key that is provided.  
4
Pelco Manual C1470M (9/97)  
 
Table A. Video Coaxial Cable Wiring Distances  
Cable Type*  
Maximum Distance  
RG59  
RG 6  
RG11  
750 ft (229 m)  
1,000 ft (305 m)  
1,500 ft (457 m)  
* Minimum cable requirements:  
75 ohms impedance  
All-copper center conductor  
All-copper braided shield with 95% braid coverage  
Table B. 24 VAC Wiring Distances  
The following are the recommended maximum distances for 24 VAC applications  
and are calculated with a 10-percent voltage drop. (10-percent is generally the  
maximum allowable voltage drop for AC-powered devices.)  
EXAMPLE:An enclosure that re-  
quires 80 vA and is installed 35 feet  
(10 m) from the transformer would  
require a minimum wire gauge of  
20 Awg.  
Wire Gauge  
22  
20  
18  
16  
14  
12  
10  
10  
20  
30  
40  
50  
60  
70  
80  
90  
178 283 451  
716 1142 1811 2880  
(54) (86) (137) (218) (348) (551) (877)  
89 141 225 358 571 905 1440  
(27) (42) (68) (109) (174) (275) (438)  
NOTE: Distances are calculated  
in feet; values in parentheses are  
meters.  
59  
94 150  
238 380 603 960  
(72) (115) (183) (292)  
(17) (28) (45)  
44  
70 112  
179 285 452 720  
(54) (86) (137) (219)  
(13) (21) (34)  
35 56 90  
143 228 362 576  
(43) (69) (110) (175)  
(10) (17) (27)  
29  
(8)  
47  
75  
119 190 301 480  
(36) (57) (91) (146)  
(14) (22)  
25  
(7)  
40  
64  
102 163 258 411  
(31) (49) (78) (125)  
(12) (19)  
35 56  
22  
(6)  
89  
142 226 360  
(10) (17)  
31 50  
(27) (43) (68) (109)  
19  
(5)  
79  
126 201 320  
(9) (15)  
28 45  
(24) (38) (61) (97)  
71 114 181 288  
100 17  
(5)  
(8) (13)  
25 41  
(21) (34) (55) (87)  
65 103 164 261  
110 16  
(4)  
(7) (12)  
23 37  
(19) (31) (49) (79)  
59 95 150 240  
120 14  
(4)  
(7) (11)  
21 34  
(17) (28) (45) (73)  
55 87 139 221  
130 13  
(3)  
(6) (10)  
(16) (26) (42) (67)  
51 81 129 205  
140 12  
(3)  
20  
(6)  
32  
(9)  
(15) (24) (39) (62)  
47 76 120 192  
150 11  
(3)  
18  
(5)  
30  
(9)  
(14) (23) (36) (58)  
44 71 113 180  
160 11  
(3)  
17  
(5)  
28  
(8)  
(13) (21) (34) (54)  
42 67 106 169  
170 10  
(3)  
16  
(4)  
26  
(7)  
(12) (20) (32) (51)  
39 63 100 160  
180  
190  
200  
9
15  
(4)  
25  
(7)  
(2)  
(11) (19) (30) (48)  
37 60 95 151  
9
14  
(4)  
23  
(7)  
(2)  
(11) (18) (28) (46)  
35 57 90 144  
8
14  
(4)  
22  
(6)  
(2)  
(10) (17) (27) (43)  
Pelco Manual C1470M (9/97)  
5
 
4.0 MAINTENANCE  
Clean the window regularly to help maintain picture clarity. Use a soft cloth and a  
mild nonabrasive detergent.  
6
Pelco Manual C1470M (9/97)  
 
5.0 MECHANICAL PARTS LIST  
Item No.  
Qty  
Description  
Mounting plate  
Part Number  
1
2
1
1
1
2
5
5
1
1
2
2
2
1
HS24004002COMP  
HS24001000WA  
HS240010000  
Front cover  
Window  
3
4
Button-head tamper-resistant screw  
Nut, 4-40  
ZH1/4-20X.50TSS  
ZH4-40NUTSH  
ZH125X312X32S  
DF54001COMP  
DF54002COMP  
ZH1/4-20NUTCH  
ZH1/4LWSSL  
5
6
Flat washer  
7
Tilt table support leg  
Tilt table  
8
9
Nut, 1/4-20  
10  
11  
12  
Split lock washer, 1/4"  
Fender washer  
ZH255X1.50X62  
ZTHEXKEY5/32  
5/32-inch tamper-resistant hex key  
Pelco Manual C1470M (9/97)  
7
 
6.0 SPECIFICATIONS  
MECHANICAL  
Camera Mounting: Adjustable tilt table  
Maximum  
Camera/Lens  
Size:  
Accommodates camera/lens combinations  
(including BNC connector) up to:  
8.0" L x 4.0" W x 4.0" H (20.32 cm x 10.16 cm x 10.16 cm)  
Viewing Window: 1/2" (1.27 cm) thick, optically clear Lexan™ plastic that is  
impact and scratch resistant  
Window  
Viewing Area:  
4.25" x 2.56" (10.8 cm x 6.50 cm)  
Cable Entry:  
Ø.875-inch (2.22 cm) knockout access through rear walls and  
top. Knockouts accept 1/2-inch (1.27 cm) conduit.  
Enclosure  
Mounting:  
Eight (8) Ø.250-inch (.635 cm) mounting holes on protected  
rear surfaces  
GENERAL  
Construction:  
Finish:  
10-gauge steel  
Gray polyester powder coat  
See Figure 1  
Dimensions:  
Environment:  
Unit Weight:  
Indoor  
17.90 lbs (8.12 kg)  
Shipping Weight: 19.30 lbs (8.76 kg)  
Rating: NEMA 1  
(Design and product specifications subject to change without notice.)  
8
Pelco Manual C1470M (9/97)  
 
3.75  
(9.53)  
1.50  
(3.81)  
4.00  
(10.16)  
13.00 (33.02)  
10.25 (26.04)  
8.63  
(21.92)  
6.50  
(16.51)  
4.25  
(10.80)  
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES  
Figure 1. HS2400 Dimension Drawing  
Pelco Manual C1470M (9/97)  
9
 
7.0 WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or  
workmanship for a period of one year after the date of shipment.  
Exceptions to this warranty are as noted below:  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
Three years on Camclosure® and fixed camera models, except the CC3701H-2, CC3701H-2X,  
CC3751H-2,CC3651H-2X,MC3651H-2,andMC3651H-2Xcameramodels,whichhaveafive-  
year warranty.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed  
dome products.  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in  
continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).  
Eighteen months on DX Series digital video recorders, NVR300 Series network video  
recorders, and EnduraSeries distributed network-based video products.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
Sixmonthsonallpanandtilts,scannersorpresetlensesusedincontinuousmotionapplications  
(that is, preset scan, tour and auto scan modes).  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment.  
AllgoodsrequiringwarrantyrepairshallbesentfreightprepaidtoPelco,Clovis,California.Repairs  
made necessary by reason of misuse, alteration, normal wear, or accident are not covered under  
this warranty.  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the  
specific use or application made of the Products. Pelco’s liability for any claim, whether based on  
breach of contract, negligence, infringement of any rights of any party or product liability, relating  
totheProductsshallnotexceedthepricepaidbytheDealertoPelcoforsuchProducts. Innoevent  
will Pelco be liable for any special, incidental or consequential damages (including loss of use, loss  
of profit and claims of third parties) however caused, whether by the negligence of Pelco or  
otherwise.  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have  
additional rights, which are subject to variation from state to state.  
Ifawarrantyrepairisrequired, theDealermustcontactPelcoat(800) 289-9100or(559)292-1981  
to obtain a Repair Authorization number (RA), and provide the following information:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
If there is a dispute regarding the warranty of a product which does not fall under the warranty  
conditions stated above, please include a written explanation with the product when returned.  
Methodofreturnshipmentshallbethesameorequaltothemethodbywhichtheitemwasreceived  
by Pelco.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800)  
289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit,  
and RA number if returned for repair).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number  
and freight should be prepaid. Ship to the appropriate address below.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed  
to return goods to the USA, you may do one of the following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco, the Pelco logo, Camclosure, Esprit,  
Genex, Legacy, and Spectra are registered  
trademarks of Pelco.  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
Endura and ExSite are trademarks of Pelco.  
© Copyright 1997, Pelco. All rights reserved.  
10  
Pelco Manual C1470M (9/97)  
 

Paxar Printer TC6035AN User Manual
Pelco Home Security System C3447M B 8 09 User Manual
Philips Clock AJ110 User Manual
Philips Flat Panel Television HQ40 User Manual
Philips Portable Radio AE 6545 User Manual
Philips Speaker System MCM238 User Manual
Philips VCR V R 110 User Manual
Pioneer Stereo Amplifier CT F10 User Manual
Polycom IP Phone IP 450 User Manual
Precision Power Stereo Equalizer EDZ User Manual