Nokia Cell Phone 2720 User Manual

Nokia 2720 User Guide  
9216235  
Issue 1  
 
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS  
OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW  
IT AT ANY TIME WITHOUT PRIOR NOTICE.  
The availability of particular products and applications and services for these products may  
vary by region. Please check with your Nokia dealer for details, and availability of language  
options.This device may contain commodities, technology or software subject to export laws  
and regulations from the US and other countries. Diversion contrary to law is prohibited.  
The third-party applications provided with your device may have been created and may be  
owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the  
copyrights or intellectual property rights to the third-party applications. As such, Nokia does  
not take any responsibility for end-user support, functionality of the applications, or the  
information in the applications or these materials. Nokia does not provide any warranty for the  
third-party applications.  
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS  
IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT  
PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS  
AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING  
BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY  
PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.  
Export controls  
This device may contain commodities, technology or software subject to export laws and  
regulations from the US and other countries. Diversion contrary to law is prohibited.  
FCC/INDUSTRY CANADA NOTICE  
Your device may cause TV or radio interference (for example, when using a telephone in close  
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using  
your telephone if such interference cannot be eliminated. If you require assistance, contact  
your local service facility. This device complies with part 15 of the FCC rules. Operation is  
3
 
subject to the following two conditions: (1) This device may not cause harmful interference,  
and (2) this device must accept any interference received, including interference that may  
cause undesired operation. Any changes or modifications not expressly approved by Nokia  
could void the user's authority to operate this equipment.  
9216235/Issue  
4
 
C o n t e n t s  
Contents  
SAFETY..................................................................................................................... 6  
1. Get started......................................................................................................... 9  
2. Your device...................................................................................................... 12  
3. Call functions.................................................................................................. 14  
4. Navigate the menus...................................................................................... 15  
5. Write text......................................................................................................... 15  
6. Camera.............................................................................................................. 17  
7. Log...................................................................................................................... 17  
8. web2go............................................................................................................. 18  
9. IM & E-mail..................................................................................................... 19  
10. Messaging ..................................................................................................... 21  
11. Fun & Apps.................................................................................................... 24  
12. Help................................................................................................................. 32  
13. Phonebook..................................................................................................... 32  
14. Settings.......................................................................................................... 34  
15. PC connectivity............................................................................................ 44  
16. Battery and charger information............................................................ 45  
Index ...................................................................................................................... 54  
5
 
S A F E T Y  
SAFETY  
Read these simple guidelines. Not following them may be dangerous or illegal.  
Read the complete user guide for further information.  
SWITCH ON SAFELY  
Do not switch the device on when wireless device use is prohibited or  
when it may cause interference or danger.  
ROAD SAFETY COMES FIRST  
Obey all local laws. Always keep your hands free to operate the  
vehicle while driving. Your first consideration while driving should be  
road safety.  
INTERFERENCE  
All wireless devices may be susceptible to interference, which could  
affect performance.  
SWITCH OFF IN RESTRICTED AREAS  
Follow any restrictions. Switch the device off in aircraft, near  
medical equipment, fuel, chemicals, or blasting areas.  
QUALIFIED SERVICE  
Only qualified personnel may install or repair this product.  
ACCESSORIES AND BATTERIES  
Use only approved accessories and batteries. Do not connect  
incompatible products.  
WATER-RESISTANCE  
Your device is not water-resistant. Keep it dry.  
6
 
S A F E T Y  
About your device  
The wireless device with the type designator RM-520 described in this guide is  
approved for use on the GSM 850 and 1900 networks. Contact your service  
provider for more information about networks.  
When using this device, obey all laws and respect local customs, privacy and  
legitimate rights of others, including copyrights.  
Copyright protection may prevent some images, music, and other content from  
being copied, modified, or transferred.  
Your device may have preinstalled bookmarks and links for third-party internet  
sites. You may also access other third-party sites through your device. Third-party  
sites are not affiliated with Nokia, and Nokia does not endorse or assume liability  
for them. If you access such sites, you should take precautions for security or  
content.  
Warning: To use any features in this device, other than the alarm clock,  
the device must be switched on. Do not switch the device on when  
wireless device use may cause interference or danger.  
When using this device, obey all laws and respect local customs, privacy and  
legitimate rights of others, including copyrights.  
Copyright protection may prevent some images, music, and other content from  
being copied, modified, or transferred.  
When connecting to any other device, read its user guide for detailed safety  
instructions. Do not connect incompatible products.  
Network services  
To use the device you must have service from a wireless service provider. Some  
features are not available on all networks; other features may require that you  
make specific arrangements with your service provider to use them. Network  
7
 
S A F E T Y  
services involve transmission of data. Check with your service provider for details  
about fees in your home network and when roaming in other networks. Your  
service provider can explain what charges will apply. Some networks may have  
limitations that affect how you can use some features of this device requiring  
network support such as support for specific technologies like WAP 2.0 protocols  
(HTTP and SSL) that run on TCP/IP protocols and language-dependent characters.  
Your service provider may have requested that certain features be disabled or not  
activated in your device. If so, these features will not appear on your device menu.  
Your device may also have customized items such as menu names, menu order, and  
icons.  
Shared memory  
The following features in this device may share memory: tones, graphics, contacts,  
text messages, multimedia, and instant messages, e-mail, calendar, To-Do Notes,  
JavaTM games, applications, and the Notes application. Use of one or more of these  
features may reduce the memory available for the remaining features. If your  
device displays a message that the memory is full, delete some of the information  
or entries stored in the shared memory.  
Access codes  
The security code helps to protect your device against unauthorized use. You can  
create and change the code, and set the device to request the code. Keep the code  
secret and in a safe place separate from your device. If you forget the code and  
your device is locked, your device will require service and additional charges may  
apply. For more information, contact a Nokia Care point or your device dealer.  
The PIN code supplied with the SIM card protects the card against unauthorized  
use. By default, the code is 12345. The PIN2 code supplied with some SIM cards is  
required to access certain services. If you enter the PIN or PIN2 code incorrectly  
8
 
G e t s t a r t e d  
three times in succession, you are asked for the PUK or PUK2 code. If you do not  
have them, contact your service provider.  
The module PIN is required to access the information in the security module of your  
SIM card. The signing PIN may be required for the digital signature. The restrictions  
password is required when using the call restriction service.  
To define how your device uses the access codes and security settings, select Menu  
> Settings > Security.  
Enhancements, batteries, and chargers  
Check the model number of any charger before use with this device. This device is  
intended for use when supplied with power from the AC-3U charger.  
Warning: Use only batteries, chargers, and enhancements approved by  
Nokia for use with this particular model. The use of any other types may  
invalidate any approval or warranty, and may be dangerous.  
For availability of approved enhancements, please contact your dealer. When you  
disconnect the power cord of any enhancement, grasp and pull the plug, not the  
cord.  
1. Get started  
Insert the SIM card and battery  
Always switch the device off and disconnect the charger before removing the  
battery.  
This device is intended for use with the BL-4CT battery. Always use original Nokia  
batteries. See "Nokia battery authentication guidelines” p. 47.  
9
 
G e t s t a r t e d  
The SIM card and its contacts can easily be damaged by scratches or bending, so be  
careful when handling, inserting, or removing the card.  
1. Press and slide the back cover toward the bottom of the device to remove the  
cover (1).  
2. To remove the battery, lift it (2).  
3. Carefully lift the SIM card holder from the finger grip of the device, and open  
the card holder (3).  
4. Insert the SIM card, so that the beveled corner is on the lower left side and the  
gold-colored contact area faces down (4). Close the SIM card holder, and press  
it to lock it into place (5).  
5. Insert the battery into the battery slot (6).  
6. Align the back cover with the back of the device. Slide and push it toward the  
bottom of the device to lock it (7).  
Charge the battery  
Your battery has been partially charged at the factory. If the device indicates a low  
charge, do the following:  
10  
 
G e t s t a r t e d  
1. Connect the charger to a wall outlet.  
2. Connect the charger to the device.  
3. When the device indicates a full charge,  
disconnect the charger from the device, then  
from the wall outlet.  
You do not need to charge the battery for a  
specific length of time, and you can use the device while it is charging. If the  
battery is completely discharged, it may take several minutes before the charging  
indicator appears on the display or before any calls can be made.  
Connect a headset  
You can connect a universal 2.5 mm headset to your device.  
Antenna  
Your device may have internal and external antennas. Avoid touching  
the antenna area unnecessarily while the antenna is transmitting or  
receiving. Contact with antennas affects the communication quality  
and may cause the device to operate at a higher power level than  
otherwise needed and may reduce the battery life.  
11  
 
Y o u r d e v i c e  
2. Your device  
Keys and parts  
1. End/Power key  
2. Right selection key  
3. Earpiece  
4. Display  
5. Left selection key  
6. NaviTM key, hereafter referred to as scroll key  
7. Call key  
8. Keypad  
9. Camera lens  
10. Headset connector  
11. Wrist strap eyelet  
12. Loudspeaker  
13. Charger connector  
14. Volume key  
15. Cover display  
12  
 
Y o u r d e v i c e  
Note: Avoid touching this connector as it is  
intended for use by authorized service  
personnel only.  
Keypad lock (keyguard)  
Select Menu or Unlock, and press * within  
1.5 seconds to lock or unlock the keypad.  
To activate the automatic keyguard, select Menu > Settings > Phone > Automatic  
keyguard.  
To answer a call when the keyguard is activated, press the call key, or open the  
device. When you end or reject the call, the keypad automatically locks.  
When the device or keypad is locked, calls may be possible to the official  
emergency number programmed into your device.  
Security keyguard  
The security keyguard requires a 5-10 digit code to protect against unauthorized  
use. To change the code and activate the security keyguard, select Menu >  
Settings > Phone > Security keyguard.  
When the security keyguard is activated, enter the security code if requested.  
For more information, see Security keyguard, in "Phone settings” p. 40.  
Functions without a SIM card  
Several functions of your device may be used without inserting a SIM card (for  
example, data transfer with a compatible PC or another compatible device).  
Without a SIM card, some functions appear dimmed in the menus and cannot be  
used.  
13  
 
C a l l f u n c t i o n s  
For an emergency call, some networks may require that a valid SIM card is properly  
inserted in the device.  
3. Call functions  
Make a voice call  
1. Enter the phone number, including the area code.  
For international calls, press * twice for the international prefix (the + character  
replaces the international access code), enter the country code, the area code  
without the leading 0, if necessary, and the phone number.  
2. To call the number, press the call key.  
To adjust the volume, use the volume keys.  
3. To end the call or to cancel the call attempt, press the end key.  
To search for a name or phone number that you have saved in Phonebook , see  
"Phonebook” p. 32. Press the call key to call the number.  
To access the list of dialed numbers, press the call key once in the standby mode. To  
call the number, select a number or name, and press the call key.  
1-touch dialing  
Assign a phone number to one of the 1-touch dialing keys, 2-9. Call the number in  
either of the following ways:  
Press a 1-touch dialing key, then the call key.  
If 1-touch dialing is activated, press and hold a 1-touch dialing key until the  
call begins. See 1-touch dialing in "Phone settings” p. 40  
14  
 
N a v i g a t e t h e m e n u s  
4. Navigate the menus  
The device functions are grouped into menus.  
1. To access the main menu, select Menu.  
To change the menu view, select Options > Main menu view and from the  
available options.  
To rearrange the menu, scroll to the menu you want to move, and select  
Options > Organize > Move. Scroll to where you want to move the menu, and  
select OK. To save the change, select Done > Yes.  
2. Scroll through the menu, and select an option (for example, Settings).  
3. If the selected menu contains further submenus, select the desired submenu  
(for example, Call).  
4. If the selected menu contains further submenus, repeat step 3.  
5. Select the desired setting.  
6. To return to the previous menu level, select Back. To exit the menu, select Exit.  
5. Write text  
You can enter text (for example, when writing messages) using traditional  
or  
predictive  
text input. Predictive text input allows you to write text quickly  
using the device keypad and a built-in dictionary. Predictive text input predicts and  
completes the word before you enter all the characters.  
,
, or  
indicate the character case. To change the character case, press #.  
indicates number mode. To switch between letter and number mode, press  
and hold #.  
To set the writing language while writing text, select Options > Writing language.  
15  
 
W r i t e t e x t  
Predictive text input  
To activate predictive text input while writing a message, select Options >  
Prediction options > Prediction > On.  
Tip: To quickly activate or deactivate predictive text, or switch to number  
mode when writing text, press # twice.  
To select the prediction input type, select Options > Prediction options >  
Prediction type > Normal or Word sugg..  
1. Start writing a word using the 2-9 keys. Press each key once for each letter. The  
entered letters are underlined.  
If you selected Word sugg. as the prediction type, the device starts to predict  
the word you are writing. After you enter a few letters, and if these entered  
letters are not a word, the device tries to predict longer words. The entered  
letters are underlined.  
To insert a special character, press and hold *. Scroll to a character, and select  
Insert.  
To write compound words, enter the first part of the word; to confirm it, scroll  
right. Write the next part of the word, and confirm the word.  
To enter a period, press 1.  
2. When you finish writing the word and it is correct, to confirm it, press 0 to add  
a space.  
If the word is not correct, press * repeatedly. When the word that you want is  
displayed, select the word.  
If the ? character is displayed after the word, the word you intended to write is  
not in the dictionary. To add the word to the dictionary, select Spell. Complete  
the word (traditional text input is used), and select Save.  
16  
 
C a m e r a  
6. Camera  
Camera and video  
When using the features in this device, obey all laws and respect local customs,  
privacy and legitimate rights of others, including copyrights.  
The camera produces images in JPEG format and video clips in 3GPP format. The  
camera lens is on the front of the device. The color display works as a viewfinder.  
Camera and video settings  
To activate the camera, select Menu > Camera. To switch to video mode, select  
Options > Video.  
Camera and video effects  
To change the camera settings or effects, select Options and one of the available  
options.  
7. Log  
Select Menu > Log > Missed calls, Received calls, or Dialed numbers. To view your  
recent missed and received calls and the dialed numbers chronologically, select All  
calls. To view the contacts to whom you most recently sent messages, select  
Message recipients.  
To view how many text and picture messages you have sent and received, select  
Menu > Log > Message log.  
17  
 
w e b 2 g o  
Note: The actual invoice for calls and services from your service provider  
may vary, depending on network features, rounding off for billing, taxes,  
and so forth.  
8. web2go  
You can access various mobile internet services with your device browser.  
Important: Use only services that you trust and that offer adequate  
security and protection against harmful software.  
For availability of these services, pricing, fees, and instructions contact your service  
provider.  
With the device browser, you can view the services that use wireless markup  
language (WML) or extensible hypertext markup language (XHTML) on their pages.  
Appearance may vary due to screen size. You may not be able to view all details of  
the internet pages.  
Connect to a service  
Ensure that the correct configuration settings of the service are activated.  
To select the settings for connecting to the service:  
1. Select Menu > web2go > Web settings > Configuration.  
2. Select Configuration. Only the configurations that support browsing service are  
shown. Select a service provider, Default, or web2go for browsing.  
You may receive the configuration settings required for browsing as a  
configuration message from the service provider that offers the service that  
you want to use.  
3. Select Account and a browsing service account contained in the active  
configuration settings.  
18  
 
I M  
&
E - m a i l  
Make a connection to the service in one of the following ways:  
Select Menu > web2go > web2go; or, in the standby mode, press and hold 0.  
To set a bookmark for the service, select Menu > web2go > Bookmarks.  
To go to the last accessed service, select Menu > web2go > Last web address.  
To go to a specific service, select Menu > web2go > Go to address. Enter the  
address of the service, and select OK.  
9. IM & E-mail  
The IM & E-mail menu contains the Instant messages and E-mail menus.  
Instant Messaging  
Your device allows you to send and receive instant messages with friends and  
family, regardless of the mobile system or platform (like the internet) they are  
using, as long as everyone is using the same IM service.  
Before you can start using IM, register with the IM service you want to use and  
obtain a unique ID and password.  
Select Menu > IM & E-mail > IM and the service you want to log into.  
Depending on your IM service provider, you may not have access to all of the  
features described in this guide and your menus may be different.  
For availability and costs and to subscribe to the IM service, contact your wireless  
service provider and the IM service provider from whom you receive your unique ID,  
password, and settings.  
While you are logged in and connected to the IM service, you can exit the IM  
application and use the other functions of the device, and the IM session and  
conversations remain active in the background.  
19  
 
I M  
&
E - m a i l  
Register with an IM service  
You can register over the internet with the IM service provider you have selected to  
use. During the registration process, you create a unique ID and password. For more  
information about signing up for IM services, contact your wireless service provider  
or an IM service provider.  
E-mail  
Select Menu > IM & E-mail > E-mail.  
E-mail provides access to certain common e-mail services. If you have an e-mail  
account with one of the supported e-mail services, then you can use this  
application to access your e-mail account. With this application you can view your  
inbox, compose and send e-mail, receive e-mail, receive notifications of new e-  
mail, and delete e-mail. This e-mail application is different from the SMS and MMS  
e-mail function.  
If you do not have an e-mail account already, visit the website of one of the e-mail  
service providers and register for an e-mail account. If you have questions  
regarding the cost of e-mail service, contact your service provider.  
E-mail settings  
From the inbox folder, select Options > Email settings and from the following:  
Folder display — View e-mails in the inbox view by their from address or subject.  
Confirm deletion — Confirm deleting and e-mail.  
Message AutoExpand — Automatically expand the e-mail message in the inbox  
view when it is highlighted.  
Exit confirmation — Confirm exiting the application.  
To apply your changes, select Save. These settings will be applied to all e-mail  
accounts.  
20  
 
M e s s a g i n g  
10. Messaging  
The message services can only be used if they are supported by your service  
provider.  
Note: The message sent icon or text on your device screen does not  
indicate that the message is received at the intended destination.  
Important: Exercise caution when opening messages. Messages may  
contain malicious software or otherwise be harmful to your device or PC.  
Text and picture message settings  
Select Menu > Messaging > Message settings > Text messages > Message centers.  
If your SIM card supports more than one message center, select or add the one you  
want to use. You may need to get the center number from your service provider.  
Select Menu > Messaging > Message settings > Picture messages and from the  
following:  
Delivery reports — Request the network to send delivery reports about your  
messages (network service)  
Image size in picture message — Define the maximum image size used in a picture  
message.  
Default slide timing — Define the default time between slides in picture messages  
Allow picture message reception — Select No, Yes, or In home network to use the  
multimedia service.  
Incoming picture messages — Decide how picture messages are retrieved. This  
setting is not displayed if Allow picture message reception is set to No.  
21  
 
M e s s a g i n g  
Allow advertisements — Choose whether you allow the reception of messages  
defined as advertisements. This setting is not displayed if Allow picture message  
reception is set to No.  
Configuration settings — Select the default service provider for retrieving picture  
messages. Select Account to see the accounts provided by the service provider and  
to select the one you want to use. You may receive the settings as a configuration  
message from the service provider.  
Text messages  
Your device supports text messages beyond the limit for a single message. Longer  
messages are sent as two or more messages. Your service provider may charge  
accordingly. Characters with accents or other marks, and characters from some  
language options, take up more space, and limit the number of characters that can  
be sent in a single message.  
An indicator at the top of the display shows the total number of characters left and  
the number of messages needed for sending. For example, 673/2 means that there  
are 673 characters left and that the message will be sent as a series of two  
messages.  
The blinking  
indicates that the message memory is full. Before you can receive  
new messages, delete some of your old messages.  
Picture messages  
Only devices that have compatible features can receive and display picture  
messages. The appearance of a message may vary depending on the receiving  
device.  
The wireless network may limit the size of picture messages. If the inserted picture  
exceeds this limit, the device may make it smaller so that it can be sent by MMS.  
22  
 
M e s s a g i n g  
A picture message can contain text, pictures, and sound clips.  
Create a text or picture message  
Select Menu > Messaging > Create message > Message. To add recipients, scroll to  
the To: field, and enter the recipient’s number, or select Add to select recipients  
from the available options. To add Cc or Bcc recipients, select Options > Add  
recipient > Cc or Bcc. To enter message text, scroll to the Text: field, and enter the  
text. To add a subject for the message, select Options > Add subject, and enter the  
subject. To attach content to the message, select Options > Insert and the desired  
type of attachment. To send the message, press the call key.  
The message type is changed automatically depending on the content of the  
message. Operations that may cause the message type to change from text  
message to picture message include, but are not limited to, the following:  
Attach a file to the message.  
Request a delivery report.  
Set priority for the message to high or low.  
Add a Cc or Bcc recipient or subject to the message.  
When the message type changes to picture message, the device may briefly display  
Message type changed to picture message, and the header text of the message  
editing window changes to New pic. msg.. Check the header text for message type.  
Service providers may charge differently depending on the message type. For  
details, contact your service provider.  
23  
 
F u n  
&
A p p s  
Voice notes  
You can use the multimedia message service to create and send a voice note. The  
multimedia messaging service must be activated before you can use voice notes.  
Select Menu > Messaging > Create message > Voice notes. The recorder opens.  
When you finish recording a voice note, enter the recipient’s phone number in the  
To: field to send the message. To retrieve a phone number from Phonebook, select  
Add > Contacts. To view the available options, select Options.  
When your device receives voice messages, to open the message, select Play; or, if  
more than one message is received, select Show > Play. To listen to the message  
later, select Exit. To view the available options, select Options. The voice message is  
played through the earpiece by default. To play the message using the loudspeaker,  
select Options > Loudspeaker.  
Voice mail  
The voice mailbox is a network service and you may need to subscribe to it. For a  
voice mailbox number and detailed information, contact your service provider.  
Select Menu > Messaging > Voice mail.  
11. Fun & Apps  
The Fun & Apps menu contains the Gallery, Games & Apps, Media, and Organizer  
menus.  
24  
 
F u n  
&
A p p s  
Gallery  
In this menu, you can manage images, video clips, music files, themes, graphics,  
tones, recordings, and received files. These files are stored in the device memory,  
and may be arranged in folders.  
Your device supports an activation key system to protect acquired content. Always  
check the delivery terms of any content and activation key before acquiring them,  
as they may be subject to a fee.  
To see the list of folders, select Menu > Fun & Apps > Gallery.  
To see the available options of a folder, select a folder and Options.  
To view the list of files in a folder, select a folder and Open.  
To see the available options of a file, select a file and Options.  
Digital rights management  
Digital rights management (DRM) is copyright protection, designed to prevent  
modification and to limit distribution of protected files. When you download  
protected files, such as sound, video, themes, or ringing tones to your device, the  
files are free, but locked. You pay for the key to activate the file, and the activation  
key is automatically sent to your device when you download the file.  
To view the permissions for a protected file, scroll to the file, and select Options >  
Activation keys. For example, you can see how many times you can view a video or  
how many days you have left for listening to a song.  
To extend the permissions for a file, select Options and the corresponding option  
for the file type, such as Activate theme. You can send certain types of protected  
files to your friends, and they can buy their own activation keys.  
This device supports OMA DRM 2.0.  
Content owners may use different types of digital rights management (DRM)  
technologies to protect their intellectual property, including copyrights. This device  
25  
 
F u n  
&
A p p s  
uses various types of DRM software to access DRM-protected content. With this  
device you can access content protected with WMDRM 10.07, OMA DRM 1.0, and  
OMA DRM 2.0. If certain DRM software fails to protect the content, content  
owners may ask that such DRM software's ability to access new DRM-protected  
content be revoked. Revocation may also prevent renewal of such DRM-protected  
content already in your device. Revocation of such DRM software does not affect  
the use of content protected with other types of DRM or the use of non-DRM-  
protected content.  
Digital rights management (DRM) protected content comes with an associated  
activation key that defines your rights to use the content.  
If your device has OMA DRM-protected content, to back up both the activation  
keys and the content, use the backup feature of Nokia PC Suite. Other transfer  
methods may not transfer the activation keys which need to be restored with the  
content for you to be able to continue the use of OMA DRM-protected content  
after the device memory is formatted. You may also need to restore the activation  
keys in case the files on your device get corrupted.  
If your device has WMDRM protected content, both the activation keys and the  
content will be lost if the device memory is formatted. You may also lose the  
activation keys and the content if the files on your device get corrupted. Losing the  
activation keys or the content may limit your ability to use the same content on  
your device again. For more information, contact your service provider.  
Games & Apps  
Open a game  
Select Menu > Fun & Apps > Games & Apps > Games. Scroll to the desired game,  
and select Open.  
To set sounds, lights, and shakes for the game, select Menu > Fun & Apps > Games  
& Apps > Options > App. settings.  
26  
 
F u n  
&
A p p s  
Open an application  
Select Menu > Fun & Apps > Games & Apps > Collection. Scroll to an application,  
and select Open.  
Application options  
Update version — Check if a new version of the application is available for  
download from web2go (network service)  
Web page — Provide further information or additional data for the application from  
an internet page (network service), if available  
App. access — Restrict the application from accessing the network  
Media  
Camera and video  
When using the features in this device, obey all laws and respect local customs,  
privacy and legitimate rights of others, including copyrights.  
The camera produces images in JPEG format and video clips in 3GPP format. The  
camera lens is on the front of the device. The color display works as a viewfinder.  
Camera and video settings  
To activate the camera, select Menu > Camera. To switch to video mode, select  
Options > Video.  
Camera and video effects  
To change the camera settings or effects, select Options and one of the available  
options.  
27  
 
F u n  
&
A p p s  
Music player  
Warning: Listen to music at a moderate level. Continuous exposure to  
high volume may damage your hearing. Do not hold the device near your  
ear when the loudspeaker is in use, because the volume may be extremely  
loud.  
Select Menu >Fun & Apps >Media > Music player to start the music player.  
Listen to music  
Select a category, such as All songs, and a song.  
Playback control  
To play or pause a song, press the play/pause/stop key.  
To stop the playback, press and hold the play/pause/stop key.  
To rewind or skip backwards, press the rewind key.  
To fast-forward or to skip forward, press the fast-forward key.  
To control the player, you can also use the scroll key.  
To adjust the volume, use the volume key.  
To play songs in random order, select Options > Shuffle > On.  
To repeat a song or all songs, select Options > Repeat on.  
To return to the standby mode and leave the player in the background, press the  
end key. In active standby, the currently playing song is displayed. To return to the  
music player, select the currently playing song.  
Voice recorder  
You can record pieces of speech, sound, or an active call. This is useful for recording  
a name and phone number to write them down later.  
28  
 
F u n  
&
A p p s  
Select Menu > Fun & Apps > Media > Recorder and the record button on the  
display to start recording. To start the recording during a call, select Options >  
Record. When you record a call, hold the device in the normal position near to your  
ear. The recording is saved in Fun & Apps >Gallery > Recordings. To listen to the  
latest recording, select Options > Play last recorded. To send the last recording  
using a multimedia message, select Options > Send last recorded.  
Organizer  
Alarm clock  
Select Menu > Fun & Apps > Organizer > Alarm clock. To set the alarm, select  
Alarm time, and enter the alarm time. To change the alarm time when the alarm  
time is set, select On.  
To set your device to alert you on selected days of the week, select Repeat > On,  
then select Repeat days and mark the day or days of the week that you want to be  
alerted.  
To select the alarm tone or set the radio as the alarm tone, select Alarm tone. If you  
select the radio as the alarm tone, connect the headset to the device.  
To set a snooze time-out period, select Snooze time-out and the desired lenght of  
time.  
Stop the alarm  
The alarm sounds an alert tone even if the device is switched off. To stop the alarm,  
select Stop. If you let the device continue to sound the alarm for a minute or select  
Snooze, the alarm stops for the length of time you set in Snooze time-out, then  
resumes.  
29  
 
F u n  
&
A p p s  
Calendar  
Select Menu > Fun & Apps > Organizer > Calendar. The current day is indicated by  
a frame. If there are any notes set for the day, the day is in bold type, and the  
beginning of the note is displayed below the calendar. To view the day notes, select  
View. To view a week, select Options > Week view. To delete all notes in the  
calendar, select the month view or week view, and Options > Delete notes > Delete  
all notes.  
To set the date, time, time zone, default view, first day of the week, or calendar  
tone, select Options > Settings. To set the device to delete old notes automatically  
after a specified time, select Auto-delete notes.  
To synchronize from a PC, see "Connectivity” p. 37.  
Make a calendar note  
Select Menu > Fun & Apps > Organizer > Calendar. Scroll to the date, and select  
Options > Make a note and one of the following note types: Reminder, Meeting,  
Call, Birthday, Anniversary, or Memo. Fill in the fields.  
Note alarm  
The device displays the note and, if set, sounds a tone. With a call note  
on the  
display, to call the displayed number, press the call key. To stop the alarm and to  
view the note, select View. To stop the alarm for 10 minutes, select Snooze.  
To stop the alarm without viewing the note, select Exit.  
To-do list  
Select Menu > Fun & Apps > Organizer > To-do list. To make a note if no note is  
added, select Add note; otherwise, select Options > Add. Fill in the fields, and  
select Save.  
30  
 
F u n  
&
A p p s  
To view a note, scroll to it, and select View. While viewing a note, you can select an  
option to edit the attributes. You can select an option to delete the selected note  
and delete all the notes that you have marked as done.  
Notes  
Select Menu > Fun & Apps > Organizer > Notes to write and send notes.  
To make a note if no note is added, select Add note; otherwise, select Options >  
Make a note. Write the note, and select Save.  
To synchronize from a PC, see "PC connectivity” p. 44.  
Calculator  
The calculator in your device provides basic arithmetic and trigonometric  
functions; calculates the square, the square root, and the inverse of a number; and  
calculates loan amounts, payments, and interest rates.  
Note: This calculator has limited accuracy and is designed for simple  
calculations.  
Select Menu > Fun & Apps > Organizer > Calculator. Press # for a decimal point.  
Scroll to the desired operation or function, or select it from Options.  
Timer  
1. Select Menu > Fun & Apps > Organizer > Timer ; enter the alarm time in hours,  
minutes, and seconds; and select OK.  
You can write your own note text, which is displayed when the time expires.  
2. To start the timer, select Start.  
3. To change the countdown time, select Change time.  
4. To stop the timer, select Stop timer.  
31  
 
H e l p  
If the alarm time is reached when the device is in the standby mode, the device  
sounds a tone and flashes the note text (if it is set) or Countdown completed. To  
stop the alarm press any key. If no key is pressed, the alarm automatically stops  
within 60 seconds. To stop the alarm and to delete the note text, select Exit. To  
restart the countdown timer, select Restart.  
Stopwatch  
Select Menu > Fun & Apps > Organizer > Stopwatch to measure time, take  
intermediate times, or take lap times using the stopwatch. During timing, the other  
functions of the device can be used. To set the stopwatch timing in the  
background, press the end key.  
Using the stopwatch or allowing it to run in the background when using other  
features increases the demand on battery power and reduces the battery life.  
12. Help  
Use the Help menu to find information about your device.  
Select Menu > Help to browse help topics, enter a search, or view information  
about your account.  
13. Phonebook  
You can store and manage contact information, such as names, phone numbers,  
and addresses. You can save names and numbers in the internal memory of the  
device, the SIM card memory, or in a combination of the two. Names and numbers  
saved in the SIM card memory, are indicated with  
.
32  
 
P h o n e b o o k  
Save names and phone numbers  
Select Menu > Phonebook > Names > Options > Add new contact. Names and  
numbers are saved in the used memory.  
Add contact details  
Select Menu > Phonebook > Settings, and ensure that the Memory in use is Phone  
or Phone and SIM.  
In the device memory you can save different types of phone numbers, a tone or a  
video clip, and short text items for a contact.  
Find the contact to which you want to add a detail, and select Details > Options >  
Add detail. Select from the available options.  
Find a contact  
Select Menu > Phonebook > Names. Scroll through the list of contacts, or enter  
the first characters of the name you are trying to find.  
Copy or move contacts  
To copy a name and phone number from the device memory to the SIM card  
memory, or vice versa, select Menu > Phonebook > Names > Options > Copy  
contact. To move all contacts from the SIM card to device memory, or vice versa,  
select Menu > Phonebook > Move contacts or Copy contacts. To copy more than  
one contact, but not all contacts, select Menu > Phonebook> Names > Options >  
Mark. Scroll and mark the contacts you want to move, and select Move marked or  
Copy marked.  
Edit contacts  
Select Menu > Phonebook > Names. Scroll to the contact, and select Options >  
Edit contact, and scroll to the details you want to change.  
33  
 
S e t t i n g s  
Business cards  
You can send and receive a person’s contact information as a business card from a  
compatible device that supports the vCard standard.  
To send a business card, find the contact whose information you want to send, and  
select Details > Options > Send bus. card.  
When you receive a business card, select Show > Save to save the business card in  
the device memory. To discard the business card, select Exit > Yes.  
Settings  
Select Menu > Phonebook > Settings and from the following:  
Memory in use — See "Add contact details” p. 33.  
Phonebook view — Select how the names and numbers in Phonebook are displayed.  
Name display — Select whether the contact’s first or last name is displayed first.  
Font size — Set the font size for the list of contacts.  
Memory status — View the available memory capacity.  
Groups  
Select Menu > Phonebook > Groups to arrange the names and phone numbers into  
caller groups with different ringing tones and group images.  
14. Settings  
Profiles  
Your device has various settings groups called profiles, for which you can  
customize the device tones for different events and environments.  
Select Menu > Settings > Profiles, the desired profile, and from the following:  
Activate — Activate the selected profile.  
34  
 
S e t t i n g s  
Customize — Customize the profile. Select the setting you want to change, and  
make the changes.  
Timed — Set the profile to be active until a certain time, up to 24 hours, and set the  
end time. When the time set for the profile expires, the previous profile that was  
not timed becomes active.  
Themes  
A theme contains elements for personalizing your device.  
Select Menu > Settings > Themes and from the following:  
Select theme — To set a theme, select the Themes folder, and a theme.  
Theme downloads — Open a list of links to download more themes  
Tones  
You can change the tone settings of the selected active profile.  
Select Menu > Settings > Tones, or select Profiles to find the same settings.  
To set the device to ring only for calls from phone numbers that belong to a  
selected caller group, select Alert for. Scroll to the caller group you want or All  
calls, and select Mark. For information on how to create a caller group, see  
"Groups” p. 34.  
Select Options > Save to save the settings.  
If you select the highest ringing tone level, the ringing tone reaches its highest  
level after a few seconds.  
Display  
Select Menu > Settings > Display and from the following:  
Wallpaper — Add the background image in the standby mode  
Standby mode font color — Select the color for the texts.  
35  
 
S e t t i n g s  
Notification details — Display contact information in missed calls and messages  
received.  
Fold animation— Choose whether an animation is shown when opening and  
closing the fold.  
Font size — Set the font size for messaging, contacts and web pages.  
Operator logo — Set your device to display or hide the operator logo.  
Date and time  
To change the time, time zone, and date settings, select Menu > Settings > Date  
and time > Date and time settings, Date and time format settings, or Auto-update  
of date & time (network service).  
When traveling to a different time zone, select Menu > Settings > Date and time  
> Date and time settings > Time zone and the time zone of your location in terms of  
the time difference with respect to Greenwich Mean Time (GMT) or Universal Time  
Coordinated (UTC). The time and date are set according to the time zone and  
enable your device to display the correct sending time of received text or  
multimedia messages. For example, GMT -5 denotes the time zone for New York  
(USA), 5 hours west of Greenwich/London (UK).  
My shortcuts  
With personal shortcuts you can quickly access frequently used functions of the  
device.  
Left selection key  
To select a function from the list, select Menu > Settings > My shortcuts > Left  
selection key.  
In the home screen mode, select Options > Go to and from the following:  
Select options — Add or remove options.  
36  
 
S e t t i n g s  
Organize — Rearrange the functions on your personal shortcut list.  
Navigation key  
To assign other device functions from a predefined list to the navigation key (scroll  
key), select Menu > Settings > My shortcuts > Navigation key.  
Sync and backup  
Select Menu > Settings > Sync and backup and from the following:  
Phone switch — Copy files to another device.  
Data transfer — Move files from your device to PC.  
Connectivity  
You can connect the device to a compatible device using Bluetooth wireless  
technology. You can also define the settings for EGPRS dial-up connections.  
Bluetooth wireless technology  
This device is compliant with Bluetooth Specification 2.0. To ensure  
interoperability between other devices supporting Bluetooth technology, use Nokia  
approved enhancements for this model. Check with the manufacturers of other  
devices to determine their compatibility with this device.  
There may be restrictions on using Bluetooth technology in some locations. Check  
with your local authorities or service provider.  
Features using Bluetooth technology increase the demand on battery power and  
reduce the battery life.  
Bluetooth technology allows you to connect the device to a compatible Bluetooth  
device within 10 meters (32 feet). Since devices using Bluetooth technology  
communicate using radio waves, your device and the other devices do not need to  
be in direct line-of-sight, although the connection can be subject to interference  
from obstructions such as walls or from other electronic devices.  
37  
 
S e t t i n g s  
Set up a Bluetooth connection  
Select Menu > Settings > Connectivity > Bluetooth and from the following:  
Bluetooth > On or Off — Activate or deactivate the Bluetooth function.  
indicates that Bluetooth is activated. When activating Bluetooth technology  
for the first time, you are asked to give a name for the device. Use a unique  
name that is easy for others to identify.  
Search for audio enhancements — Search for compatible Bluetooth audio devices.  
Select the device that you want to connect to the device.  
Paired devices — Search for any Bluetooth device in range. Select New to list any  
Bluetooth device in range. Select a device, and Pair. Enter an agreed Bluetooth  
passcode of the device (up to 16 characters) to associate (pair) the device to your  
device. You must only give this passcode when you connect to the device for the  
first time. Your device connects to the device, and you can start data transfer.  
Active devices — View a list of active devices to which you have an active  
connection  
My phone's visibility — Select your device’s visibility to other devices.  
My phone's name — Change the name of your device, which is visible to other  
Bluetooth devices.  
Bluetooth wireless connection  
Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth  
connection is currently active, select Active devices. To view a list of Bluetooth  
devices that are currently paired with the device, select Paired devices.  
Bluetooth settings  
To define how your device is shown to other Bluetooth devices, select Menu >  
Settings > Connectivity > Bluetooth > My phone's visibility or My phone's name.  
38  
 
S e t t i n g s  
If you are concerned about security, deactivate the Bluetooth function, or select  
My phone's visibility > Hidden. Only connect to devices, or let other devices  
connect to you, if you have agreed so with the owner of the other device.  
Packet data  
General packet radio service (GPRS) is a network service that allows mobile phones  
to send and receive data over an internet protocol (IP)-based network.  
To define how to use the service, select Menu > Settings > Connectivity > Packet  
data > Packet data connection and from the following:  
When needed — Set the packet data connection to be established when an  
application needs it. The connection is closed when the application is terminated.  
Always online — Set the device to automatically connect to a packet data network  
when you switch the device on  
Modem settings  
You can connect the device using Bluetooth wireless technology to a compatible  
PC and use the device as a modem to enable GPRS connectivity from the PC.  
To define the settings for connections from your PC, select Menu > Settings >  
Connectivity > Packet data > Packet data settings > Active access point, and  
activate the access point you want to use. Select Edit active access point > Packet  
data access point, enter a name to change the access point settings, and select OK.  
Select Packet data access point, enter the access point name (APN) to establish a  
connection to an network, and select OK.  
You can also set the EGPRS dial-up service settings (access point name) on your PC  
using the Nokia Modem Options software. See "Nokia PC Suite” p. 44. If you have  
set the settings both on your PC and on your device, the PC settings are used.  
39  
 
S e t t i n g s  
Call settings  
Select Menu > Settings > Call and from the following:  
Call forwarding — Forward your incoming calls (network service). You may not be  
able to forward your calls if some call restriction functions are active. See Call  
restrictions in "Security” p. 43.  
Anykey answer — Answer an incoming call by briefly pressing any key, except the  
power key, and the left and right selection keys  
Automatic redial — Make a maximum of 10 attempts to connect the call after an  
unsuccessful call attempt  
1-touch dialing — Dial the names and phone numbers assigned to the speed-  
dialing keys 2 - 9. To use, press and hold the corresponding number key  
Call waiting — Display a notification for an incoming call while you have a call in  
progress (network service).  
Call duration display — Display a counter during each call.  
Summary after call — Display the approximate duration and cost (network service)  
of the call after each call.  
Send my caller ID — Show your phone number to the person you are calling.  
(network service). To use the setting agreed upon with your service provider, select  
Set by network.  
Answer when fold is opened > On — to answer an incoming call by opening the fold  
Phone settings  
Select Menu > Settings > Phone and from the following:  
Language settings — Set the display language of your device, select Phone  
language. Automatic selects the language according to the information on the SIM  
card.  
Memory status — View the available device memory  
40  
 
S e t t i n g s  
Automatic keyguard — Set the keypad of your device to lock automatically after a  
preset time delay when the device is in the standby mode and no function of the  
device has been used. Select On, and set the time.  
Security keyguard — Set the device to ask for the security code when you unlock  
the keyguard. Enter the security code, and select On.  
Operator selection — Select the network operator or use automatic selection  
Help text activation — Select whether the device shows help text.  
Start-up tone — Activate the device to play a tone when switched on.  
Switch off tone — Activate the device to play a tone when switched off.  
Fold close handling > Go to standby — to set the device to go to standby mode  
when fold is closed. Applications capable of running in the background are not  
affected.  
Enhancements  
This menu or the following options are displayed only if the device is or has been  
connected to a compatible mobile enhancement.  
Select Menu > Settings > Enhancements, select and enhancement, and from  
following options:  
Charger > Default profile — Select the profile that you want to be automatically  
activated when you connect to the selected enhancement  
Charger > Lights — Set the lights permanently on. Select Automatic to set the  
lights on for 15 seconds after a keypress.  
Headphones — Select the activated profile when a headset in connected.  
41  
 
S e t t i n g s  
Activate the hearing aid mode  
Select Hearing aid > T-coil hearing aid mode > On to optimise the sound quality  
when using a t-coil hearing aid. The  
icon is shown when the T-coil hearing aid  
mode is active.  
If you make an emergency call to 911 while the device is in the hearing aid mode,  
the device will use as much power as it needs (up to the maximum available) to  
connect the call. More information on accessibility can be found at  
Configuration  
You can configure your device with settings required for certain services to  
function correctly. Your service provider may also send you these settings.  
Select Menu > Settings > Configuration and from the following:  
Default configuration settings — View the service providers saved in the device. To  
set the configuration settings of the service provider as default settings, select  
Options > Set as default.  
Activate default in all applications — Activate the default configuration settings for  
supported applications.  
Preferred access point — View the saved access points. Scroll to an access point,  
and select Options > Details to view the name of the service provider, data bearer,  
and packet data access point or GSM dial-up number.  
Device manager settings — Select when to allow service software updates.  
Personal configuration settings — Add new personal accounts for various services  
manually, and to activate or delete them. To add a new personal account if you  
have not added any, select Add new; otherwise, select Options > Add new. Select  
the service type, and select and enter each of the required parameters. The  
42  
 
S e t t i n g s  
parameters differ according to the selected service type. To delete or activate a  
personal account, scroll to it, and select Options > Delete or Activate.  
Security  
When security features that restrict calls are in use (such as call restriction and  
fixed dialing) calls still may be possible to the official emergency number  
programmed into your device.  
Select Menu > Settings > Security and from the following:  
PIN code request — Set the device to ask for your PIN code every time the device is  
switched on. Some SIM cards do not allow the code request to be switched off.  
Call restrictions — Restrict incoming calls to and outgoing calls from your device  
(network service). A restriction password is required.  
Fixed dialing — Restrict your outgoing calls to selected phone numbers if this  
function is supported by your SIM card. When the fixed dialing is on, GPRS  
connections are not possible except while sending text messages over a GPRS  
connection. In this case, the recipient’s phone number and the message center  
number must be included in the fixed dialing list.  
Security level — Set the device to ask for the security code whenever a new SIM  
card is inserted into the device. If you select Memory, the device asks for the  
security code when the SIM card memory is selected, and you want to change the  
memory in use.  
Access codes — Change the security code, PIN code, or PIN2 code.  
Code in use — Activate the PIN code requirement.  
PIN2 code request — Select whether the PIN2 code is required when using a  
specific device feature which is protected by the PIN2 code. Some SIM cards do not  
allow the code request to be switched off.  
43  
 
P C c o n n e c t i v i t y  
Authority certificates — View the list of the authority certificates downloaded into  
your device.  
User certificates — View the list of the user certificates downloaded into your  
device.  
Security module settings — View Security module details, select Module PIN  
request, or change the module PIN and signing PIN.  
Restore settings  
Select Menu > Settings > Restore settings to reset some of the menu settings to  
their original values.  
15. PC connectivity  
You can access the internet when your device is connected to a compatible PC  
through a Bluetooth connection. You can use your device with a variety of PC  
connectivity and data communications applications.  
Nokia PC Suite  
With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do  
notes between your device and the compatible PC or a remote internet server  
(network service). For more information, and to download Nokia PC Suite, visit  
Packet data  
With your device you can use packet data services. For availability and subscription  
to data services, contact your service provider. See "Modem settings” p. 39.  
44  
 
B a t t e r y a n d c h a r g e r i n f o r m a t i o n  
Data communication applications  
For information on using a data communication application, refer to the  
documentation provided with it.  
Making or answering phone calls during a computer connection is not  
recommended, as it might disrupt the operation.  
For better performance during data calls, place the device on a stationary surface  
with the keypad facing downward. Do not move the device by holding it in your  
hand during a data call.  
16. Battery and charger information  
Charging and discharging  
Your device is powered by a rechargeable battery. The battery intended for use with  
this device is BL-4CT. Nokia may make additional battery models available for this  
device. This device is intended for use when supplied with power from the  
following chargers: AC-3U.  
The battery can be charged and discharged hundreds of times, but it will eventually  
wear out. When the talk and standby times are noticeably shorter than normal,  
replace the battery. Use only Nokia approved batteries, and recharge your battery  
only with Nokia approved chargers designated for this device. Use only  
replacement batteries qualified with the device per the IEEE 1725-2006 standard.  
Use of other batteries or chargers may present a risk of fire, explosion, leakage, or  
other hazard. Use of other batteries or chargers may present a risk of fire,  
explosion, leakage, or other hazard.  
If a battery is being used for the first time or if the battery has not been used for a  
prolonged period, it may be necessary to connect the charger, then disconnect and  
reconnect it to begin charging the battery. If the battery is completely discharged,  
45  
 
B a t t e r y a n d c h a r g e r i n f o r m a t i o n  
it may take several minutes before the charging indicator appears on the display or  
before any calls can be made.  
Safe removal. Always switch the device off and disconnect the charger before  
removing the battery.  
Unplug the charger from the electrical plug and the device when not in use. Do not  
leave fully charged battery connected to a charger, since overcharging may shorten  
its lifetime. If left unused, a fully charged battery will lose its charge over time.  
Avoid extreme temperatures. Always try to keep the battery between 15°C and  
25°C (59°F and 77°F). Extreme temperatures reduce the capacity and lifetime of  
the battery. A device with a hot or cold battery may not work temporarily. Battery  
performance is particularly limited in temperatures well below freezing.  
Do not short-circuit. Accidental short-circuiting can occur when a metallic object  
such as a coin, clip, or pen causes direct connection of the positive (+) and negative  
(-) terminals of the battery. (These look like metal strips on the battery.) This might  
happen, for example, when you carry a spare battery in your pocket or purse. Short-  
circuiting the terminals may damage the battery or the connecting object.  
Disposal. Do not dispose of batteries in a fire as they may explode. Dispose of  
batteries according to local regulations. Please recycle when possible. Do not  
dispose as household waste.  
Leak. Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries.  
In the event of a battery leak, prevent battery liquid contact with skin or eyes. If  
this happens, flush the affected areas immediately with water, or seek medical  
help.  
Do not modify or remanufacture, attempt to insert foreign objects into the battery  
or immerse or expose it to water or other liquids.  
Correct use. Use the battery only for its intended purpose. Improper battery use  
may result in a fire, explosion, or other hazard. If the device or battery is dropped,  
46  
 
B a t t e r y a n d c h a r g e r i n f o r m a t i o n  
especially on a hard surface, and you believe the battery has been damaged, take it  
to a service center for inspection before continuing to use it.Use the battery only  
for its intended purpose. Never use any charger or battery that is damaged. Keep  
your battery out of the reach of small children.  
Nokia battery authentication guidelines  
Always use original Nokia batteries for your safety. To help ensure that you are  
getting an original Nokia battery, purchase it from a Nokia authorized service  
center or dealer, and inspect the hologram label using the following steps:  
Authenticate hologram  
1. When you look at the hologram on the label, you should  
see the Nokia connecting hands symbol from one angle and  
the Nokia Original Enhancements logo when looking from  
another angle.  
2. When you angle the hologram left, right, down and up, you  
should see 1, 2, 3 and 4 dots on each side respectively.  
Successful completion of the steps is not a total assurance of  
the authenticity of the battery. If cannot confirm authenticity  
or if you have any reason to believe that your Nokia battery  
with the hologram on the label is not an authentic Nokia  
battery, you should refrain from using it, and take it to the nearest Nokia  
authorized service center or dealer for assistance.  
For additional information, refer to the warranty and reference leaflet included  
with your Nokia device.  
47  
 
T a k i n g c a r e o f y o u r d e v i c e  
Taking care of your device  
Your device is a product of superior design and craftsmanship and should be  
treated with care. The following suggestions will help you protect your warranty  
coverage.  
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture  
can contain minerals that will corrode electronic circuits. If your device does  
get wet, remove the battery, and allow the device to dry completely before  
replacing it.  
Do not use or store the device in dusty, dirty areas. Its moving parts and  
electronic components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in high or cold temperatures. High temperatures can  
shorten the life of electronic devices, damage batteries, and warp or melt  
certain plastics. When the device warms to its normal temperature from a cold  
temperature, moisture can form inside the device and damage electronic  
circuit boards.  
Do not attempt to open the device other than as instructed in this guide.  
Do not drop, knock, or shake the device. Rough handling can break internal  
circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the  
device. Only use a soft, clean, dry cloth to clean the surface of the device.  
Do not paint the device. Paint can clog the moving parts and prevent proper  
operation.  
48  
 
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Use only the supplied or an approved replacement antenna. Unauthorized  
antennas, modifications, or attachments could damage the device and may  
violate regulations governing radio devices.  
Use chargers indoors.  
Backup all data you want to keep, such as contacts and calendar notes.  
To reset the device from time to time for optimum performance, power off the  
device and remove the battery.  
These suggestions apply equally to your device, battery, charger, or any accessory.  
Recycle  
The crossed-out wheeled-bin symbol on your product, battery, literature, or  
packaging reminds you that all electrical and electronic products, batteries,  
and accumulators must be taken to separate collection at the end of their  
working life. This requirement applies in the European Union. Do not dispose  
of these products as unsorted municipal waste. For more environmental  
environment.  
Additional safety information  
Small children  
Your device and its accessories may contain small parts. Keep them out of the reach  
of small children.  
Operating environment  
This device meets RF exposure guidelines in the normal use position at the ear or at  
least 2.2 centimeters (7/8 inches) away from the body. Any carry case, belt clip, or  
holder is used for body-worn operation should not contain metal and should  
position the device the above-stated distance from your body.To send data files or  
messages requires a quality connection to the network. Data files or messages may  
49  
 
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
be delayed until such a connection is available. Follow the separation distance  
instructions until the transmission is completed.  
Medical devices  
Operation of any radio transmitting equipment, including wireless devices, may  
interfere with the function of inadequately protected medical devices. Consult a  
physician or the manufacturer of the medical device to determine whether they are  
adequately shielded from external RF energy. Switch off your device when  
regulations posted instruct you to do so. Hospitals or health care facilities may use  
equipment sensitive to external RF energy.  
Implanted medical devices  
Manufacturers of medical devices recommend a minimum separation of 15.3  
centimeters (6 inches) between a wireless device and an implanted medical device,  
such as a pacemaker or implanted cardioverter defibrillator, to avoid potential  
interference with the medical device. Persons who have such devices should:  
Always keep the wireless device more than 15.3 centimeters (6 inch) from the  
medical device.  
Not carry the wireless device in a breast pocket.  
Hold the wireless device to the ear opposite the medical device.  
Turn the wireless device off if there is any reason to suspect that interference is  
taking place.  
Follow the manufactures directions for the implanted medical device.  
If you have any questions about using your wireless device with an implanted  
medical device, consult your health care provider.  
Hearing aids  
Some digital wireless devices may interfere with some hearing aids.  
50  
 
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles such as electronic fuel injection, electronic antilock  
braking, electronic speed control, and air bag systems. For more information,  
contact the manufacturer of your vehicle or its equipment.  
Only qualified personnel should service the device or install the device in a vehicle.  
Faulty installation or service may be dangerous and may invalidate your warranty.  
Check regularly that all wireless device equipment in your vehicle is mounted and  
operating properly. Do not store or carry flammable liquids, gases, or explosive  
materials in the same compartment as the device, its parts, or accessories.  
Remember that air bags inflate with great force. Do not place your device or  
accessories in the air bag deployment area.  
Switch off your device before boarding an aircraft. The use of wireless teledevices  
in an aircraft may be dangerous to the operation of the aircraft and may be illegal.  
Potentially explosive environments  
Switch off your device in any area with a potentially explosive atmosphere. Obey  
all posted instructions. Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or death. Switch off the device at refuelling points such as  
near gas pumps at service stations. Observe restrictions in fuel depots, storage, and  
distribution areas; chemical plants; or where blasting operations are in progress.  
Areas with a potentially explosive atmosphere are often, but not always, clearly  
marked. They include areas where you would be advised to turn off your vehicle  
engine, below deck on boats, chemical transfer or storage facilities and where the  
air contains chemicals or particles such as grain, dust, or metal powders. You  
should contact the manufacturers of vehicles using liquefied petroleum gas (such  
as propane or butane) to determine if this device can be safely used in their vicinity.  
51  
 
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Emergency calls  
Important: This device operates using radio signals, wireless networks,  
landline networks, and user-programmed functions. If your device  
supports voice calls over the internet (internet calls), activate both the  
internet calls and the cellular device. The device may attempt to make  
emergency calls over both the cellular networks and through your  
internet call provider if both are activated. Connections in all conditions  
cannot be guaranteed. You should never rely solely on any wireless device  
for essential communications like medical emergencies.  
To make an emergency call:  
1. If the device is not on, switch it on. Check for adequate signal strength.  
Depending on your device, you may also need to complete the following:  
Insert a SIM card if your device uses one.  
Remove certain call restrictions you have activated in your device.  
2. Press the end key as many times as needed to clear the display and ready the  
device for calls.  
3. Enter the official emergency number for your present location. Emergency  
numbers vary by location.  
4. Press the call key.  
When making an emergency call, give all the necessary information as accurately  
as possible. Your wireless device may be the only means of communication at the  
scene of an accident. Do not end the call until given permission to do so.  
52  
 
A d d i t i o n a l s a f e t y i n f o r m a t i o n  
Certification information (SAR)  
This mobile device meets guidelines for exposure to radio waves.  
Your mobile device is a radio transmitter and receiver. It is designed not to exceed  
the limits for exposure to radio waves recommended by international guidelines.  
These guidelines were developed by the independent scientific organization ICNIRP  
and include safety margins designed to assure the protection of all persons,  
regardless of age and health.  
The exposure guidelines for mobile devices employ a unit of measurement known  
as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP  
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for  
SAR are conducted using standard operating positions with the device transmitting  
at its highest certified power level in all tested frequency bands. The actual SAR  
level of an operating device can be below the maximum value because the device is  
designed to use only the power required to reach the network. That amount  
changes depending on a number of factors such as how close you are to a network  
base station. The highest SAR value under the ICNIRP guidelines for use of the  
device at the ear is 0.77W/kg.  
Use of device accessories may result in different SAR values. SAR values may vary  
depending on national reporting and testing requirements and the network band.  
Additional SAR information may be provided under product information at  
Your mobile device is also designed to meet the requirements for exposure to radio  
waves established by the Federal Communications Commission (USA) and Industry  
Canada. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of  
tissue. The highest SAR value reported under this standard during product  
certification for use at the ear is 1.24W/kg and when properly worn on the body is  
0.51W/kg.  
53  
 
I n d e x  
Index  
clock settings 36  
configuration 42  
contacts  
NUMERICS  
1-touch dialing 14  
editing 33  
finding 33  
A
groups 34  
accessories 41  
alarm clock 29  
saving 33  
countdown timer 31  
B
D
battery  
data  
charging, discharging 45  
charging/discharging 10  
inserting 9  
communication 45  
date settings 36  
digital rights management 25  
display 35  
Bluetooth connectivity 37  
browser, phone 18  
business cards 34  
E
e-mail 20  
settings 20  
end call 14  
C
calculator 31  
calendar 30  
call  
F
log 17  
register. See call log.  
settings 40  
factory settings 44  
call functions 14  
calls 14  
camera 17, 27  
effects 17, 27  
settings 17, 27  
character case 15  
G
gallery 25  
games 26  
GPRS 39  
54  
 
H
N
help 32  
names 32  
navigation 15  
navigation key 37  
notes 31  
I
internet 18  
notes, calendar 30  
K
O
keyguard 13  
keypad lock 13  
keys 12, 13  
organizer 29  
P
packet data 39  
parts 12  
L
listening to music 28  
log 17  
PC connectivity 44  
PC Suite 44  
phone  
configuration 42  
parts 12  
settings 40  
M
memory  
SIM 32  
phone lock. See keypad lock.  
phonebook 32  
picture messages 22  
predictive text input 16  
memory full 22  
menu 15  
message center 21  
message settings  
multimedia 21  
text 21  
R
messages  
recorder 28  
picture 22  
text 22  
restore settings 44  
ringing tones 35  
voice mail 24  
voice notes 24  
messaging 21  
music.See music player.  
S
safety  
information 6  
scrolling 15  
55  
 
I n d e x  
security  
stopwatch 32  
settings 43  
services 18  
set profiles 34  
settings  
T
text 15, 16  
text messages 22  
themes 35  
accessories 41  
call 40  
time settings 36  
timer 31  
to-do list 30  
tones 35  
camera 17, 27  
clock 36  
configuration 42  
connectivity 37  
date 36  
display 35  
GPRS 39  
message 21  
my shortcuts 36  
phone 40  
U
unlock keypad 13  
V
phonebook 34  
profiles 34  
restore 44  
security 43  
themes 35  
time 36  
voice mail 24  
voice mailbox 24  
voice notes 24  
voice recorder 28  
W
tones 35  
shortcuts 36  
web services 18  
web2go 18  
SIM  
card 13  
write text 15  
SIM card installation 9  
standby mode 36  
56  
 

Moultrie Digital Camera D50IR User Manual
Moyer Diebel Dishwasher MD18 1 User Manual
NCR Food Warmer S10XL User Manual
Nikon Camera Lens 17 55mm User Manual
Nintendo Video Games 61313A User Manual
Northern Industrial Tools Log Splitter M1107C User Manual
Omega Model Vehicle acc 101 User Manual
Optoma Technology Projector HDBV3080 User Manual
Oregon Scientific Weather Radio WMR968 User Manual
Panasonic Telephone KX TA616 User Manual