P
E
R
S
O
N
A
L
B o d y M a x
H e a l t h
S c a l e
Model:
2 0 5 5 0
IEC60355
2 x 3V Lithium
SAFETY SPECIFICATIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE
2 y e a r g u a r a n t e e
MW_200550_bbodymmax_IM.indd
1
12/14/2009 10:04:45 AM
KEY
A – Glass platform
B – Metal sensors
C – Display
D – Controls
D.
C.
A.
y
B.
CAUTION
1. When the display shows “Err”, it means that the scale is overloaded.
2. Before use, ensure that feet are bare. Ie. remove all socks and shoes.
3. When measuring water, fat, bones, and muscle, if the skin doesn’t touch the metal sheet well, it will
display the wrong data “----“.
4. Before use, please check the battery, make sure battery is pushed all the way into the space
provided. Take out the batteries if you won’t use the scale for a long time to preserve them.
5. If the battery doesn’t have enough power for the scale, it will show “Lo” in the display. You will need
to replace the batteries.
.
6. The scale should be placed on a hard flat surface, otherwise the data will be incorrect.
MW_200550_bbodymmax_IM.indd
3
12/14/2009 10:04:52 AM
PREPARATIONS BEFORE USE:
•
Insert the Lithium battery (included) in the
underside of the scale. (Note: Make sure the
battery is pushed all the way into the space
provided. Also, make sure the “+” side of the
battery is facing out)
Measure water, fat, bones, and muscle rate
In order to measure these factors you need
to setup your personal settings such as your
unique setting profile number (P0 – P9),
gender, age, and height settings.
•
Select the unit of measure you use (kg, lb, st)
on the underside of the scale.
Personal Setting
OPERATION
1. For the BodyMax Health scale to remember
your settings, you need to choose a unique
number for your profile. (P0 – P9)
2. Turn on the scale as mentioned above, and it
will show “0,0”.
Control Function
1.
Key: UP
2. Key: “set”
3. Press the “set” key, then “P0” will flash for the
first time.
4. Press the “UP” or “DOWN” key to select your
preferred profile number. (P0 – P9)
5. Press the “set” key to confirm your profile
number selection.
a.
b.
c.
Turns the scale on
Enter into a parameter setting
Confirm the data
p
3.
Key: DOWN
Personal Weight
1. Scale setup: Place the scale on a hard flat
surface. To turn the scale on, gently tap the
glass platform of the scale with your foot, or
press the “set” key. Then the scale displays
Gender Setting
1. Press the “UP” or “DOWN” key to select MALE
or FEMALE, then press “set” to confirm.
,
and then the digital weight measurement will
turn to 0,0. This indicates that the scale has
been setup correctly.
a. Note: This “Scale setup” procedure needs to
be performed each time you use the scale.
b. Note: If you step on the platform before “0,0”
appears, you will not obtain a reading. If this
happens, step off the scale, then wait for the
display to turn off and follow the above steps
to setup the scale.
Age Setting
1. Press “UP” or “DOWN” key to select your age
from 10 to 99, and then press “set” to confirm.
2. To measure your weight, simply stand with
both feet in the centre of the scale’s glass
platform. Be sure to stand upright and
Height Setting
remain still. Then the display will show your
weight and it will flash about 2 seconds. This
indicates your actual weight. If you step off
the scale, the display will turn to “0,0”, ready
for further weighing and will shut off after 15
seconds if no further action is taken.
1. Press the “UP” or “DOWN” key to select your
height from 60 to 240cm, and press “set” to
confirm.
3. It will not save the date after shutting off.
4. When the scale is overloaded, the display
shows “Err”, and shuts off.
Stand with your bare feet in the centre of the
glass platform, be sure to stand upright and
remain still. Your skin needs to be touching
MW_200550_bbodymmax_IM.indd
4
12/14/2009 10:04:52 AM
the metal sensors on the scale in order to read your body percentages. After your weight has been
captured, remember to remain still until the display flashes, it will then display the measurement data.
Your weight will remain on the display, but the fat and muscle, and the water and bone percentages
will alternate on the display.
Notes: If re-measuring is needed, simply re-start the scale. Your personal data was memorized, so
you don’t need to reset it. Press the “set” key to confirm your settings, after selecting your personal
number (P0 – P9). It will be ready to weigh after “0,0” appears.
Body fat percentage normal ranges:
These tables should be used as a guideline only. For further information consult with a medical
professional.
%RG\ꢋ)DWꢋ3HUFHQWDJHꢋLQꢋꢌ
ꢀꢁꢂꢃꢁ
ꢀꢁꢂꢃ
$JH
0DOH
$JH
)HPDOH
ꢃꢁꢂꢄꢁ
ꢀꢁꢂꢂ
ꢄꢁꢂꢅꢁ
ꢀꢁꢂꢄ
ꢅꢁꢂꢆꢁ
ꢀꢁꢂꢅ
ꢆꢁꢂꢇꢁ
ꢀꢁꢂꢆ
ꢀꢆꢂꢃꢄ
ꢇꢁꢂꢈꢈ
ꢀꢁꢂꢇ
ꢀꢇꢂꢃꢅ
8QGHUIDW
+HDOWK\
2YHUIDW
ꢀꢁꢂꢀꢉ
!ꢁꢂꢈ
ꢀꢁꢂꢃꢁ
ꢀꢀꢂꢀꢈ
!ꢁꢂꢉ
ꢃꢁꢂꢄꢁ
ꢀꢄꢂꢃꢀ
!ꢁꢊꢂ
ꢄꢁꢂꢅꢁ
ꢀꢅꢂꢃꢃ
!ꢁꢊꢊ
ꢅꢁꢂꢆꢁ
!ꢁꢊꢄ
!ꢁꢊꢅ
ꢆꢁꢂꢇꢁ
ꢀꢁꢂꢉ
ꢀꢈꢂꢃꢊ
ꢇꢁꢂꢈꢈ
ꢀꢁꢂꢉ
ꢀꢈꢂꢃꢊ
ꢀꢁꢂꢆ
ꢀꢁꢂꢆ
ꢀꢁꢂꢋ
ꢀꢁꢂꢈ
8QGHUIDW
+HDOWK\
2YHUIDW
ꢀꢆꢂꢃꢄ
!ꢁꢊꢄ
ꢀꢆꢂꢃꢄ
!ꢁꢊꢄ
ꢀꢊꢂꢃꢆ
!ꢁꢊꢆ
ꢀꢉꢂꢃꢇ
!ꢁꢊꢇ
!ꢁꢊꢋ
!ꢁꢊꢋ
0XVFOHꢋ3HUFHQWDJHꢋLQꢋꢌ
ꢃꢁꢂꢃꢈ
$JH
0DOH
ꢀꢁꢂꢀꢅ
ꢀꢁꢊꢉ
ꢃꢈꢂꢅꢀ
ꢀꢆꢂꢀꢈ
ꢀꢁꢊꢈ
ꢄꢁꢂꢄꢈ
ꢀꢁꢊꢇ
ꢅꢁꢂꢅꢈ
ꢀꢁꢊꢆ
ꢆꢁꢂꢆꢈ
ꢀꢁꢊꢅ
ꢃꢅꢂꢄꢄ
ꢇꢁꢂꢇꢈ
ꢀꢁꢊꢄ
ꢃꢄꢂꢄꢃ
ꢊꢁꢂꢈꢈ
ꢀꢁꢊꢊ
ꢃꢃꢂꢄꢀ
ꢀꢁꢊꢋ
/LWWOH
1RUPDO
+LJK
ꢃꢉꢂꢅꢁ
!ꢁꢅꢃ
ꢀꢆꢂꢀꢈ
ꢃꢊꢂꢄꢈ
!ꢁꢄꢉ
ꢃꢁꢂꢃꢈ
ꢃꢇꢂꢄꢊ
!ꢁꢄꢋ
ꢄꢁꢂꢄꢈ
ꢃꢆꢂꢄꢆ
!ꢁꢄꢆ
ꢅꢁꢂꢅꢈ
!ꢁꢅꢂ
!ꢁꢄꢄ
!ꢁꢄꢊ
!ꢁꢄꢂ
$JH
ꢀꢁꢂꢀꢅ
ꢀꢁꢊꢋ
ꢃꢊꢂꢄꢆ
ꢆꢁꢂꢆꢈ
ꢀꢁꢊꢃ
ꢃꢁꢂꢃꢇ
ꢇꢁꢂꢇꢈ
ꢀꢁꢂꢉ
ꢀꢈꢂꢃꢆ
ꢊꢁꢂꢈꢈ
ꢀꢁꢂꢈ
ꢀꢉꢂꢃꢅ
ꢀꢁꢊꢇ
ꢀꢁꢊꢆ
ꢀꢁꢊꢅ
ꢀꢁꢊꢊ
/LWWOH
1RUPDO
+LJK
)HPDOH
ꢃꢇꢂꢄꢄ
!ꢁꢄꢄ
ꢃꢆꢂꢄꢀ
!ꢁꢄꢂ
ꢃꢅꢂꢄꢁ
!ꢁ3ꢃ
ꢃꢃꢂꢃꢉ
!ꢁꢊꢈ
!ꢁꢄꢆ
!ꢁꢊꢇ
!ꢁꢊꢆ
!ꢁꢊꢅ
:DWHUꢋ3HUFHQWDJHꢋLQꢋꢌ
ꢀꢁꢂꢈꢈ
%RQHꢋ3HUFHQWDJHꢋLQꢋꢌ
$JH
$JH
ꢀꢁꢂꢈꢈ
!ꢁꢇꢆ
ꢆꢁꢂꢇꢆ
ꢀꢁꢆꢃ
ꢀꢁꢂꢈꢈ
!ꢁꢇꢃ
!ꢁꢂꢈ
ꢀꢃꢂꢀꢉ
ꢀꢁꢂꢊ
ꢀꢁꢂꢈꢈ
!ꢁꢂꢇ
9HU\ꢋJRRG
*RRG
%DG
+LJK
1RUPDO
/LWWOH
0DOH
$JH
)HPDOH
0DOH
$JH
)HPDOH
9HU\ꢋJRRG
*RRG
%DG
+LJK
1RUPDO
/LWWOH
ꢅꢆꢂꢇꢁ
ꢀꢁꢅꢆ
ꢀꢁꢂꢀꢇ
ꢀꢁꢂꢃ
MW_200550_bbodymmax_IM.indd
5
12/14/2009 10:04:53 AM
27 Nourse
Avenue Epping
2
Cape Town
P.O. Box 975 Eppindust 7475 South Africa
Tel: +27 21 534 8114 Fax: +27 21 534 8086
Service Centre Share Call: 086 111 5006
w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a
MW_200550_bbodymmax_IM.indd
6
12/14/2009 10:04:53 AM
|