Modular Fast Fiber Switch Converter
SC/ST/MT-RJ/VF-45
Multi-Mode /Single Mode Fiber
10/100Base-Tx to 100FX
Auto MDI/MDI-X on UTP port
IEEE 802.3/IEEE 802.3u
Store and Forward
Filter abnormal packet
IEEE 802.3x Flow Control
Link lose forwarding- User site,
Central site modes
The Lantech modular Fast Fiber switch converter
provides varies type fiber connector for fiber
connectivity, also support single mode fiber and
multi-mode fiber use for different link distance.
For easily detects the link status, the Fast Fiber
switch converter supports “Link Lose
Forwarding” (LLF) function for two modes – User
site and Central side mode via a DIP selection.
On user site, if the UTP port link down , the
system will also link down the fiber until the
UTP link is recovered.
On central site, if the
Fiber port link down, system will link down the
UTP link until the Fiber link is recovered.
The Lantech modular Fast fiber switch converter
can be used as a standalone unit or slide in a 19
inch rack-mount 10 slot chassis.
|