Installation
Guide
HT-12 Home Theater Subwoofer
HT-12
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
How to Connect
How to Connect
Speaker Connections
The McIntosh HT-12 Home Theater Subwoofer utilizes
binding posts for speaker wire connections. Refer to
figure 2.
1. Connect a loudspeaker cable from the red and black
loudspeaker binding posts to the appropriate terminals on
the rear of the Power Amplifier.
Note: For additional connection information, refer
to the Power Amplifier Owner’s Manual.
2. Tighten all of the loudspeaker and amplifier binding posts.
Figure 2
-
+
McIntosh Power Amplifier
3
Please Take A Moment
The serial number, purchase date and McIntosh dealer
name are important to you for possible insurance claim or
future service. The spaces below have been provided for
you to record that information:
Serial Number:
Purchase Date:
Dealer Name:
Technical Assistance
If at any time you have questions about your McIntosh
product, contact your McIntosh dealer who is familiar with
your McIntosh equipment and any other brands that may
be part of your system. If you or your dealer wish addi-
tional help concerning a suspected problem, you can re-
ceive technical assistance for all McIntosh products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-723-3636
Specifications
Driver Complement
12 inch LD/HP Woofer
McIntosh Laboratory, Inc.
2 Chambers Street
Impedance
Binghamton, NY 13903
4 ohm Nominal
Frequency Response
29Hz - 500Hz + 3dB (Close Microphone)
Sensitivity
86dB (2.8V/1m, Ground Plane)
Power Handling
400 Watts Maximum
Dimensions
17 inches (43.18cm) Height, add 1/2 inch (1.27cm) for
Feet; 17 inches (43.18cm) Width; 17 inches (43.18cm)
Depth, add 1 inch (2.54cm) for Grille
Finish
Black Ash
Weight (each)
75 pounds (34.02kg) net, 83 pounds (37.65kg) in shipping
carton
Copyright 2001 ã by McIntosh Laboratory, Inc.
|