ESPAÑOL
FRANÇAIS
ENGLISH
AV Surround Receiver
SR5006
CD-ROM
v
Explains how to easily install, connect and setup a 7.1-channel
home theater system.
• Explains all operations of your receiver. Open the included CD-ROM on
your computer for detailed operating instructions.
Getting Started
Mise en route
Explique comment installer, connecter et configurer
facilement un système de home cinéma 7.1 canaux.
• Explique tout le fonctionnement de votre récepteur. Ouvrez le CD-ROM
inclus sur votre ordinateur pour pouvoir consulter la notice d'utilisation
détaillée.
Explica cómo instalar, conectar y configurar fácilmente un
sistema de cine en casa de 7.1 canales.
Antes de empezar
• Explica todas las operaciones del receptor. Abra el CD-ROM en el
ordenador para ver instrucciones detalladas de funcionamiento.
zD&M Holdings is striving to be a paperless company in order to help preserve the environment. Your cooperation and understanding is appreciated.
zD&M Holdings s’efforce d’être une société “sans papier” afin de contribuer à préserver l’environnement. Nous sommes sensibles à votre coopération et votre compréhension.
zD&M Holdings se esfuerza por ser una empresa sin papel para ayudar a conservar el medio ambiente. Se valora su cooperación y comprensión.
ESPAÑOL
FRANÇAIS
ENGLISH
SAFETY PRECAUTIONS
n
IMPORTANT SAFETY
INSTRUCTIONS
FCC INFORMATION (For US customers)
1. COMPLIANCE INFORMATION
Product Name: AV Surround Receiver
Model Number: SR5006
This product complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this product may not cause harmful
interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.
marantz America, Inc.
(a D&M Holdings Company)
100 Corporate Drive,
Mahwah, NJ, 07430, U.S.A.
Tel. (630) 741-0300
CAUTION
1. Read these instructions.
2. Keep these instructions.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained
in this manual, meets FCC requirements. Modification not expressly
approved by marantz may void your authority, granted by the FCC, to use
the product.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
3. IMPORTANT
When connecting this product to network hub or router, use only a
shielded STP or ScTP LAN cable which is available at retailer.
Follow all installation instructions. Failure to follow instructions could void
your authority, granted by the FCC, to use the product.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
4. NOTE
This product has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television reception,
which can be determined by turning the product OFF and ON, the user
is encouraged to try to correct the interference by one or more of the
following measures:
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
CAUTION:
To completely disconnect this product from the mains, disconnect
the plug from the wall socket outlet.
• Reorient or relocate the receiving antenna.
The mains plug is used to completely interrupt the power supply to
the unit and must be within easy access by the user.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the local retailer authorized to distribute this type of product or
an experienced radio/TV technician for help.
PRECAUTION:
Pour déconnecter complètement ce produit du courant secteur,
débranchez la prise de la prise murale.
La prise secteur est utilisée pour couper complètement
l’alimentation de l’appareil et l’utilisateur doit pouvoir y accéder
facilement.
For Canadian customers:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
PRECAUCIÓN:
Para desconectar completamente este producto de la alimentación
eléctrica, desconecte el enchufe del enchufe de la pared.
El enchufe de la alimentación eléctrica se utiliza para interrumpir
por completo el suministro de alimentación eléctrica a la unidad
y debe de encontrarse en un lugar al que el usuario tenga fácil
acceso.
I
ENGLISH
FRANÇAIS
ESPAÑOL
nCAUTIONS ON INSTALLATION
PRÉCAUTIONS D’INSTALLATION
EMPLAZAMIENTO DE LA INSTALACIÓN
NOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO
n
WARNINGS
AVERTISSEMENTS
ADVERTENCIAS
• Avoid high temperatures.
• Eviter des températures élevées.
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une étagère.
• Manipuler le cordon d’alimentation avec
précaution.
• Evite altas temperaturas.
Allow for sufficient heat dispersion when installed in
a rack.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Keep the unit free from moisture, water, and dust.
• Unplug the power cord when not using the unit for • Protéger l’appareil contre l’humidité, l’eau et la
Permite la suficiente dispersión del calor cuando
está instalado en la consola.
• Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón
de energía.
z
Tenir la prise lors du débranchement du cordon.
z
z
• Mantenga el equipo libre de humedad, agua y
polvo.
long periods of time.
poussière.
• Do not obstruct the ventilation holes.
• Do not let foreign objects into the unit.
• Do not let insecticides, benzene, and thinner come
in contact with the unit.
• Never disassemble or modify the unit in any way.
• Ventilation should not be impeded by covering
the ventilation openings with items, such as
newspapers, tablecloths or curtains.
• Naked flame sources such as lighted candles
should not be placed on the unit.
• Observe and follow local regulations regarding
battery disposal.
• Do not expose the unit to dripping or splashing
fluids.
• Do not place objects filled with liquids, such as
vases, on the unit.
• Do not handle the mains cord with wet hands.
• When the switch is in the OFF (STANDBY)
position, the equipment is not completely switched
off from MAINS.
• The equipment shall be installed near the
power supply so that the power supply is easily
accessible.
• Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de longues
périodes.
• Desconecte el cordón de energía cuando no utilice
el equipo por mucho tiempo.
• No obstruya los orificios de ventilación.
• No deje objetos extraños dentro del equipo.
• Ne pas obstruer les trous d’aération.
z
• Ne pas laisser des objets étrangers dans l’appareil. • No permita el contacto de insecticidas, gasolina y
• Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
• Ne jamais démonter ou modifier l’appareil d’une
manière ou d’une autre.
• Ne pas recouvrir les orifices de ventilation avec des
objets tels que des journaux, nappes ou rideaux.
Cela entraverait la ventilation.
• Ne jamais placer de flamme nue sur l'appareil,
notamment des bougies allumées.
• Veillez à respecter les lois en vigueur lorsque vous
jetez les piles usagées.
• L’appareil ne doit pas être exposé à l’eau ou à
l’humidité.
• Ne pas poser d’objet contenant du liquide, par
exemple un vase, sur l’appareil.
• Ne pas manipuler le cordon d’alimentation avec les
mains mouillées.
diluyentes con el equipo.
• Nunca desarme o modifique el equipo de ninguna
manera.
Wall
Paroi
Pared
• La ventilación no debe quedar obstruida por
haberse cubierto las aperturas con objetos como
periódicos, manteles o cortinas.
• No deberán colocarse sobre el aparato fuentes
inflamables sin protección, como velas encendidas.
• A la hora de deshacerse de las pilas, respete la
normativa para el cuidado del medio ambiente.
• No exponer el aparato al goteo o salpicaduras
cuando se utilice.
• No colocar sobre el aparato objetos llenos de
líquido, como jarros.
• No maneje el cable de alimentación con las manos
mojadas.
• Cuando el interruptor está en la posición OFF
(STANDBY), el equipo no está completamente
desconectado de la alimentación MAINS.
• El equipo se instalará cerca de la fuente de
alimentación de manera que resulte fácil acceder
a ella.
zFor proper heat dispersal, do not install this unit in a confined
space, such as a bookcase or similar enclosure.
• More than 12 in. (0.3 m) is recommended.
• Do not place any other equipment on this unit.
zPour permettre la dissipation de chaleur requise, n’installez
pas cette unité dans un espace confiné tel qu’une bibliothèque
ou un endroit similaire.
• Une distance de plus de 12 po (0,3 m) est recommandée.
• Ne placez aucun matériel sur cet appareil.
zPara la dispersión del calor adecuadamente, no instale este
equipo en un lugar confinado tal como una librería o unidad
similar.
• Lorsque l’interrupteur est sur la position OFF
(STANDBY), l’appareil n’est pas complètement
déconnecté du SECTEUR (MAINS).
• L’appareil sera installé près de la source
d’alimentation, de sorte que cette dernière soit
facilement accessible.
• Se recomienda dejar más de 12 pulg. (0,3 m) alrededor.
• No coloque ningún otro equipo sobre la unidad.
II
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
Read before use
Thank you for purchasing this marantz product.
This manual explains the Setup Wizard that you will need to perform directly after removing the product from its packaging, before you start using the product.
The Setup Wizard displays easy to follow guidance on your television screen that shows you how to connect and configure speakers, various other devices, and network functions for full enjoyment of this unit.
Contents
About this manual
Cautions on handling
• Before turning the power on
Check once again that all connections are correct and that there are
no problems with the connection cables.
Read before use ····································································1
nOperation buttons
Accessories····················································································1
About this manual ········································································1
Cautions on handling····································································1
The operations described in this manual are based mainly on
remote control operation.
• Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When going on vacation or leaving home
for long periods of time, be sure to unplug the power cord from the
power outlet.
nSymbols
This symbol indicates a reference page on which
related information is described.
v
Preparing the Setup Wizard·············································2
Setup Wizard···········································································4
Playback (Basic operation)················································7
This mark indicates the page of the owner’s manual on
the CD-ROM provided.
m
• About condensation
If there is a major difference in temperature between the inside of
the unit and the surroundings, condensation (dew) may form on
the operating parts inside the unit, causing the unit not to operate
properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
This symbol indicates a supplementary information
and tips for operations.
Important information··································································7
Selecting the input source ···························································7
Adjusting the master volume ······················································8
Turning off the sound temporarily··············································8
This symbol indicates points to remember operations
or function limitations.
NOTE
nIllustrations
• Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from this unit when it is in use.
Note that the illustrations in this manual is for explanation purposes
and may differ from the actual unit.
nAbout the CD-ROM
• Moving the unit
Turn off the power and unplug the power cord from the power
outlet. Next, disconnect the connection cables to other system units
before moving the unit.
(Getting Started / Owner’s manual)
Accessories
Check that the following parts are supplied with the product.
q Getting Started........................................................................1
w CD-ROM (Owner’s manual) ....................................................1
e Warranty card (for USA) ..........................................................1
r Warranty card (for CANADA)...................................................1
t Power cord..............................................................................1
y Remote control unit (RC014SR) ..............................................1
u R03/AAA batteries...................................................................2
i Setup microphone (ACM1H) ...................................................1
o AM loop antenna.....................................................................1
• About care
®
You need to have Adobe Reader installed on your computer to
• Wipe the cabinet and control panel clean with a soft cloth.
• Follow the instructions when using a chemical cleaner.
• Benzene, paint thinner or other organic solvents as well as
insecticide may cause material changes and discoloration if brought
into contact with the unit, and should therefore not be used.
view the owner’s manuals on the CD-ROM.
Click the Adobe Reader banner in the CD-ROM menu to install
the Adobe Reader (for Windows).
®
®
Q
0
FM indoor antenna ..................................................................1
t
y
i
o
Q
0
1
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Preparing the Setup Wizard
This section describes how to prepare the Setup Wizard before use.
nDo not plug the power plug of the main unit into the wall socket until these preparations are complete.
nSpeaker connections are performed using the Setup Wizard. Do not connect the speakers yet.
What you need for this step
Place and layout speakers
1
Speaker
Speaker cable
Before installing the speakers, connect the speaker cables to the speakers. For details on how to connect the speaker cables, see the
speaker instruction manual.
(sold separately)
(sold separately)
Connect the speaker cables to the main unit using the Setup Wizard.
C
SBL
SBR
n When 7.1-channel (Surround back speaker) installed n When 5.1-channel installed
FL
FR
SL
SR
• Prepare enough for the number
of speakers you will use.
FL
FR
SW
Subwoofer (with built-in
amplifier) (sold separately)
Audio cable
(sold separately)
FL
FR
SW
C
C
z1
z1
z2
z2
z3
SL
TV
HDMI cable
SR
SL
SR
(sold separately)
(sold separately)
Listening
position
Listening position
SBL
SBR
z1 22˚ – 30˚
z2 120˚
z1 22˚ – 30˚
z2 90˚ – 110˚
z3 135˚ – 150˚
Remote control unit /
Setup microphone
R03/AAA batteries (supplied)
(supplied)
FL
FR
C
Front speaker (L)
Front speaker (R)
Center speaker
• Install the surround speakers in a position 2 to 3 ft (60 to 90 cm) higher than
ear level.
Surround
SW Subwoofer
SL
SR
speaker
Surround back speaker
Front
Surround speaker (L)
Surround speaker (R)
(When 7.1-channel installed)
• Point slightly downwards
speaker
2 – 3 ft /
60 – 90 cm
Power cord (supplied)
SBL Surround back speaker (L)
SBR Surround back speaker (R)
GViewed from the sideH
2
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
Turn the television power on, and switch the video input to
this unit (HDMI input)
Connect this unit to the television using an HDMI cable
(sold separately)
3
2
For details on how to operate the television, see the television instruction manual.
NOTE
If this unit is connected using cables other than the HDMI cable, the Setup Wizard
will not be displayed.
HDMI IN
(ARC)
q Power on
w Switch the input to this unit (HDMI input)
Insert the provided batteries into the remote control unit
q Remove the rear lid in the direction of the arrow and remove it.
4
w Load the two batteries properly as indicated by the marks in the battery compartment.
R03/AAA
e Put the rear cover back on.
vStart Setup Wizard on next page
3
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Setup Wizard
When preparations are complete, start the Setup Wizard.
Use the Setup Wizard to perform connections and settings as shown in the following steps. Perform the operations as described in the
instructions on the screen. You can skip or cancel at each section if necessary.
1
4
Language Select
Source Setup
Please select the
language for the on
screen menu.
English
Español
Please select device.
[1/2]
Source Setup
BD
Language Select
DVD
VCR
SAT
GAME
AUX
Set the connecting terminals for each
device to be set, and connect to the
terminals.
Set the language for the instructions on
the television screen.
These settings can be changed in the following menu even after setting the Setup Wizard
(vmpage 106 “Language”).
These settings can be changed in the following menu even after setting the Setup Wizard
(vmpage 109 “Input Assign”).
2
Speaker Connection
Please select the
5
Speaker Connection
speaker configuration
Network Setup
to be used.
5.1ch
Please connect LAN cable to ETHERNET port on
rear panel of receiver, and other side of
cable to network router.
Network Setup
Connect the speakers for surround sound.
7.1ch
Others
When connection is complete, press [ENTER]
to continue.
Configure to playback audio files saved
onto a computer or Internet radio.
NOTE
7.1ch adds 2 more
speakers to 5.1ch, for
enhanced surround.
Connections for speakers other than 7.1 channel or 5.1
channel speakers cannot be set using the Setup Wizard.
Select “Others”, and then select “Skip” in “2. Speaker Connection” to proceed to “3. Speaker
Calibration”. (For details on the setting method, see m page 58 “Speaker installation/connection
(Advanced connection)”.)
These settings can be changed in the following menu even after setting the Setup Wizard
(vmpage 99 “Network Setup”).
This completes the Setup Wizard.
3
Speaker Calibration
MultEQ XT
Detect & Measure (Main)
Please connect
Speaker Calibration
microphone.
Configure the settings for your speakers,
and for the optimum surround sound for
your room.
Measure
These settings can be changed in the following menu even after setting the Setup Wizard
®
(vmpage 19 “Set up speakers (Audyssey Auto Setup)”).
4
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
Basic operation of Setup Wizard
Getting Started
Insert the main unit power plug into the wall
socket.
Press ON ( ) on this unit.
Z
1
3
Speaker Connection
The power switches on, and the Setup Wizard start screen is
displayed on the television screen.
Please select the
speaker configuration
to be used.
5.1ch
7.1ch
Others
Power on
Move to the item that
you want to configure
7.1ch adds 2 more
speakers to 5.1ch, for
enhanced surround.
using ui.
Speaker Connection
Setup Wizard
7.1ch is selected for speaker
system. Select “Yes” to confirm.
This wizard assists
1. Language Select
To household power outlet
(AC 120 V, 60 Hz)
connection and setup
2. Speaker Connection
of receiver step by
Move to the item that
you want to configure
using o p.
Yes
No
step using cursor,
Power cord
(supplied)
3. Speaker Calibration
enter or return keys
4. Source Setup
5. Network Setup
Complete
on remote.
Press [ENTER] to start.
Press AMP to set the remote control unit to AMP-
operation mode.
2
Start
Speaker Connection
Please connect the
speakers.
Switch the AMP-operation mode
Press ENTER.
Location :CENTER
Terminal :CENTER
4
Start the Setup Wizard.
Press [ENTER] for next
connection.
Enters the selection.
Setup Wizard has started.
Ready to connect
Please follow the message on screen.
To start the Setup Wizard again after exiting it, select “Setup
Wizard” in the menu (vmpage 82 “Menu map”).
Setup Wizard
Do you wish to stop
and exit wizard?
You can restart the
setup wizard anytime
using the on screen
menu.
Yes
No
• This remote control is a preset remote control that can be used to
control connected devices.
Returns to the start of
each setting.
or
When power is switched to standby
Press STANDBY (X).
Cancels the Setup
Wizard.
GPower indicator status in standby modeH
• Normal standby : Red
• When “HDMI Control” (vm page 97) is
set to “ON” : Orange
NOTE
During power standby, a minimal amount of power is consumed. To
totally cut off the power, remove the power cord from the power
outlet.
5
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
nConnecting the speakers
The speakers are connected in “2. Speaker Connection” of the Setup Wizard but if you did not use or cancelled the Setup Wizard, connect the speakers as shown below.
For details, see the included CD-ROM (Owner’s manual).
Connect
7.1-channel
5.1-channel
Carefully check the left (L) and right (R) channels and
+ (red) and – (black) polarities on the speakers being
connected to the this unit, and be sure to interconnect
the channels and polarities correctly.
Connecting the speaker cables
Peel off about 0.03 ft/10 mm of sheathing from the tip of the
speaker cable, then either twist the core wire tightly or terminate it.
NOTE
• Connect so that the speaker cable core wires do not protrude
from the speaker terminal. The protection circuit may be
activated if the core wires touch the rear panel or if the + and –
sides touch each other (vm page 134 “Protection Circuit”).
• Never touch the speaker terminals while the power supply is
connected. Doing so could result in electric shock. (When the
Setup Wizard is running, follow the instructions in the Setup
Wizard screen for making connections.)
FL
FR
FL
FR
SW
SW
C
C
• Use speakers with the speaker impedances shown below.
Speaker terminals
Speaker impedance
FRONT A
FRONT B
FRONT A + B
CENTER
6 – 8 Ω
8 Ω
SL
SR
SL
SR
SURROUND
6 – 8 Ω
SURR. BACK / AMP ASSIGN
SBL
SBR
6
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
Playback (Basic operation)
Here, we explain how to perform simple operations.
For details, see the included CD-ROM (Owner’s manual).
Selecting the input source
Important information
You can also use the following operation to select an input
source.
nUsing the “Source Select” menu
Before starting playback, make the connections between the different
devices and the settings on the unit.
The currently selected input
source is highlighted.
Source Select
nUsing the SOURCE dfbutton on the remote
NOTE
Player
Video
SAT
TV
Tuner
Network
control unit
Also refer to the operating instructions of the connected devices
when playing them.
BD
TUNER
Favorites
Internet Radio
Media Server
Flickr
Press SOURCE dor SOURCE f.
• Every time you press SOURCE d or
SOURCE f, the input source switches in
the following order.
DVD
CD
VCR
GAME
AUX
M-XPort
USB/iPod
Pandora
Selecting the input source
Napster
Press the input source select button
(BD, DVD, SAT, TV, NET/USB, CD,
TUNER or M-XP) twice to be played
Rhapsody
[
] Move
[ENTER] Enter
BD
DVD
VCR
TUNER
SAT
CD
GAME
TV
AUX
back.
When an input source select button (BD,
DVD, SAT, TV, CD, NET/USB, TUNER or
M-XP) is pressed once, the unit switches
to device selected by the operating mode of
the remote control. If the input source select
button is then pressed again twice, the input
source for the unit is switched.
M-XPort
NET/USB
q Press 3.
Display the “Source Select” menu.
w Use uiopto select the input source,
then press ENTER.
nUsing the knob on the main unit
Turn INPUT SELECTOR.
The input source is set and the source
selection menu is turned off.
• Every time you turn INPUT SELECTOR, the input source switches
in the following order.
BD
DVD
VCR
TUNER
SAT
CD
GAME
TV
AUX
• When 21 is pressed, the input source of this unit is switched
to “NET/USB” and the connected iPod is automatically played
(vmpage 30 “iPod play function”).
M-XPort
NET/USB
• When using with an iPod connected directly to the USB port of this
unit, select “USB/iPod” for the input source.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vmpage 103).
• To turn off the source selection menu without selecting an input
source, press 3 again.
• Select input source “AUX” to play back music from an audio system
connected to the AUX IN connector.
• The input source “GAME” is selected to playback from a game
device connected to GAME connector of HDMI IN.
• Select the input source “VCR”, “GAME” or “AUX” using one of the
following methods.
• SOURCE dfbutton on the remote control unit
(“Using the SOURCE df button on the remote control unit”
provided on the right)
• When 3 is pressed, the AMP-operation mode starts automatically
(vmpage 114).
• INPUT SELECTOR knob on the main unit
(“Using the knob on the main unit” provided on the right)
• “Source Select” menu
(“Using the “Source Select” menu”provided on the right)
7
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Other operations
Adjusting the master volume
Use VOLUME +, – to adjust the
See the following items on the included CD-ROM
(Owner’s manual).
volume.
n When the “Volume Display” setting
(vmpage 103) is “Relative”
GAdjustable rangeH
nPlaying a Blu-ray Disc player/DVD player
nPlaying a CD player
– – –
–80.5dB – 18.0dB
®
nPlaying an iPod
n When the “Volume Display” setting (vmpage 103) is
nPlaying a USB memory device
nTuning in radio stations
“Absolute”
0.0 – 99.0
GAdjustable rangeH
• The variable range differs according to the input signal and channel
level setting.
nPlaying a network audio
nSelecting a listening mode (Surround mode)
nConvenient functions
nPlayback in ZONE2 (Separate room)
nHow to make detailed settings
You can also operate via the main unit. In this case, perform the
following operations.
Turn VOLUME to adjust the volume.
nOperating the connected devices by remote
control unit
Turning off the sound temporarily
Press MUTE.
• “MUTE” appears on the display.
appears on a TV screen.
•
• The sound is reduced to the level set at “Mute Level” (v
mpage 103).
• To cancel, press MUTE again. Muting can also be canceled by
adjusting the master volume.
This completes the basic settings and
operations.
For details on how to change settings
ordetailedexplanationsofoperations,
see the included CD-ROM (Owner’s
manual).
8
D&M Holdings Inc.
Printed in China 5411 10698 003M
V00
|