HEARTH PRODUCTS
KITS AND ACCESSORIES
506033-21
REV. A 09/2011
LEg LEVELINg pAdS kIT
BELLA™, gRANdVIEW™
INSTALLATION INSTRUCTIONS FOR LEg LEVELINg pAdS FOR USE WITH BELLA™ pELLET
STOVES ANd gRANdVIEW™ WOOd STOVES WITH COASTAL OR LAkEVIEW LEgS
kIT CONTENTS (See Figure 1)
INSTALLATION INSTRUCTIONS (STANdARd INSTALLATION)
4 ea. Leg Leveling Pads
1 ea. Instruction Sheet
Step 1. Using an escalera or other heavy lifting device, secure and lift the
stove to expose the bottom of the cast legs.
Step 2. Screw in leg leveling pads to all four (4) legs (Figure 1).
Cat. #
H7638
Model
description
BELLA-LLk
Leg Leveling pads kit
Bella pellet Stove
TOOLS NEEdEd
Escalera or other Heavy Lifting Device
gENERAL INFORMATION
If you encounter any problems, need clarification of these instructions or are
notqualifiedtoproperlyinstallthiskit, contactyoulocaldistributorordealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL WARNINgS ANd pRECAUTIONS IN THE INSTALLATION ANd Op-
ERATION MANUAL pROVIdEd WITH THE AppLIANCE AppLY TO THESE
INSTRUCTIONS.
grandview™ Wood Stove with Coastal or Lakeview Legs
TURN OFF THE STOVE ANd ALLOW IT TO COMpLETELY COOL BEFORE
pROCEEdINg.
Coastal Leg
Lakeview Leg
Figure 1
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and the discontinuance of colors, styles and products. Consult
your local distributor for fireplace code information.
Printed in U.S.A. © 2008 Lennox Hearth Products
Lennox Hearth products
1508 Elm Hill pike, Suite 108 • Nashville, TN 37210
p/N 506033-21 REV. A 09/2011
|