• For small and mid–sized systems
• Addressable conventional technology
with a maximum of 16 zones
• Up to 8 evacuation circuits
• Menu-driven operation
• Free parameter setup via PC
software or operating field
• Factory settings allow for easy
commissioning
• EN 54/VdS-certified
Fire is a permanent threat to life and property. There- ted within LST premises, thus guaranteeing flexible and
fore, immediate response to a fire is imperative. The reliable individual solutions.
main objective of the fire detection control panel Series
BC016 is to alarm and to react in time and, conse- Using a powerful processor system, display texts, and a
quently, save lives and protect property. For decades large number of integrated functions, the fire detection
LST have focused their aims to undertaking unrivaled control panels Series BC016 ensure topmost efficiency
efforts in order to realize new innovations in the security and speed – prerequisites for saving lives and minimi-
area. Research, development and production are loca- zing damage to property.
Description
Fire detection control panel BC016-2 in design and can manually start or terminate an evacuation alarm on
function corresponds to fire detection control panel the fire detection control panel without prior alarm of a
BC016-1. In addition, the BC016-2 has the possibility fire detector. In the LED field, the first zone displays are
to operate up to eight alarming devices as evacuation automatically used for displaying the operating conditi-
circuits directly via the expanded keypad of the control ons of the evacuation circuits.
panel. These evacuation circuits can be actuated either
dependent of the alarm situation of the detector zone or For security reasons a two-button operation must be
by a superordinate danger detection device.
performed to activate an evacuation circuit.
Using the expanded keypad, you can manually activate The physical outputs for the control and monitoring of
or deactivate the alarming devices that have been para- the alarming devices are provided by optional modules
meterised as evacuation circuits independent from the (e.g., siren connection module SZ58-3).
alarm situation on the control panel. This way, the user
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BC016-2_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Permanent Connection
A variety of peripheral devices can be connected to the
fire detection control panel BC016-2:
• Fire brigade key safe
• Actuations
• Fire brigade control unit
• Acoustic and optical signaling devices
• External protocol printer
• Remote indication unit
• Modules for remote parameterisation and remote
maintenance via computer newtork, modem or GSM
connection
– and much more.
Specifications
Mains voltage
230VAC +10/-15%, 50Hz
typ. 28VDC
Output/nominal voltage
Output peak current
Own current consumption at 24V
Ambient temperature
Relative humidity
max. 1.8A
typ. 70mA (without optional componentries)
-5°C to +50°C
95% (no condensation)
380 × 480 × 83 (mm)
gray-white, RAL 9002
approx. 5kg
Dimensions W × H × D
Colour
Weight without accumulator
Approvals (EN 54-2, EN 54-4)
VdS G205023
FT 14/439/04 (Austria),
Part No.
210122
Order name
Fire and Evacuation Panel BC016-2/INT1
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BC016-2_DBL_LST_EN_0804.PDF • PAGE 3
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|