• ADM loop technology with
Apollo/Discovery protocol
• Activation by pressing in the pane of
plastic
• Two-coloured LED indicates activation
and fault
• Integrated dual-isolator
• Operating instructions by means of
standardised symbols
Description
The Manual Call Point 55100-908 complies with the low colour. The detector address is selected by means
standard EN 54-11/A and is designed for use in ADM of a DIL switch. A dual-isolator, which is integrated into
loops with Apollo/Discovery protocol.
the detector, disconnects the adjacent loop elements
The detector is activated by pressing in the pane of fast and safely in case of a short circuit.
plastic. By means of a special key, the pane can be
put back to the idle position, thereby resetting the de- The detector is fitted into a plastic case and can be
tector.
mounted on a 60mm flush-mount installation box. By
means of the supplied case, surface mounting on a wall
The two-coloured status LED indicates the activation of is also possible.
the detector in red colour and the fault condition in yel-
Specifications
Operating voltage
Current consumption
Ambient temperature
Relative humidity
Supply through loop voltage
100µA (quiescent)
-20°C to +60°C (no condensation or icing)
max. 95% (no condenstation)
IP24
Protection class
Dimensions W × H × D
with surface mount box
89 × 93 × 59 (mm)
89 × 93 × 28 (mm)
installation on flush-mount installation box
Colour
flame red, RAL 3000
Weight
160g
Order number
Order name
245015
Manual Call Point/Red/XP95/ISM/Flexi 55100-908
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
55100-908_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|