Kenwood CD Player DPF 1010 User Manual

CD PLAYER  
DPF-1010  
DPF-2010  
DPF-3010  
INSTRUCTION MANUAL  
KENWOOD CORPORATION  
COMPACT  
DIGITAL AUDIO  
B60-3730-08 00 KO ( T, M, X )  
OC  
99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3  
 
DPF-3010/2010/1010 (En)  
Unpacking  
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.  
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to  
you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for  
shipping damage.  
3
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.  
Keep this manual handy for future reference.  
Special features  
Advancedtechnologiesincorporatedinpursuitof  
improved sound quality and stability  
D.R.I.V.E. (Dynamic Resolution Intensive Vector Enhancement) IC is built in for drastic  
reduction of distortion at small signal level. (DPF-3010 only)  
High-performance 1-bit D/A converter achieving a 20-bit resolution. (DPF-3010 only)  
Convenient features for dubbing CD onto tape  
CD peak search for setting the recording level that does not cause distortion.  
(
Edit function for rearranging tracks according to the tape length so that no music is interrupted  
in the middle.  
*
%
Easy operation functions  
Auto space function.  
Easy operation functions allow systematic operation with other KENWOOD components  
connected through the system control connection.  
8
Accessories  
AC plug adaptor .............. (1)  
Audio cord ........................ (1)  
System control cord ............ (1)  
Use to adapt the plug on the power cord  
to the shape of the wall outlet.  
(Accessory only for regions where use is  
necessary.)  
Remote control unit ......... (1)  
(DPF-3010/DPF-2010 only)  
Batteries (R6/AA) .............. (2)  
(DPF-3010/DPF-2010 only)  
Caution: Read the pages marked  
carefully to ensure safe operation.  
Contents  
Introduction.................................................................. 2  
Before applying power ................................................ 2  
Safety precautions....................................................... 2  
Special features ................................................................... 3  
IMPORTANT SAFEGUARDS ........................................ 4  
System connections .................................................... 6  
To use the headphone......................................................... 7  
Maintenance................................................................. 9  
Controls and indicators ............................................. 10  
Operation of remote control unit ............................. 11  
Normal play (TRACK mode)...................................... 12  
Playing tracks in order from track No.1 .......................... 12  
Playback from desired track ............................................. 13  
Skipping tracks .................................................................. 13  
Searching ........................................................................... 13  
Time display on CD player (TIME DISPLAY) .................... 13  
Programmed play (PGM mode)................................ 14  
To check or change the programmed tracks .................. 15  
To add a track to the program ......................................... 15  
To clear tracks from the program .................................... 15  
Repeated playback .................................................... 16  
To repeat only the programmed tracks........................... 16  
To repeat the entire disc ................................................... 17  
Editing......................................................................... 18  
Playing or recording the edited contents ....................... 18  
To check the edited contents ........................................... 19  
To clear the edited contents ............................................. 19  
Peak search ........................................................................ 19  
Playback in random order (Random playback) ....... 20  
Timer operations........................................................ 21  
In case of difficulty..................................................... 22  
Specifications ............................................................. 23  
 
Caution : Read this page carefully to ensure  
safe operation.  
IMPORTANT SAFEGUARDS  
DPF-3010/2010/1010 (En)  
Please read all of the safety and operating instructions  
before operating this appliance. Adhere to all warnings on  
the appliance and in the instruction manual. Follow all the  
safety and operating instructions. These safety and  
operating instructions should be retained for future  
reference.  
6. Temperature – The appliance may not function  
properly if used at extremely low, or freezing  
temperatures. The ideal ambient temperature is  
above +5°C (41°F).  
4
7. Heat – The appliance should be situated away from  
heat sources such as radiators, heat registers, stoves,  
or other appliances (including amplifiers) that produce  
heat.  
1. Power sources – The appliance should be connected to  
apowersupplyonlyofthetypedescribedintheinstruction  
manual or as marked on the appliance. If you are not sure  
of the type of power supply to your home, consult your  
appliance dealer or local power company. For appliances  
intended to operate from battery power, or other sources,  
refer to the instruction manual.  
8. Electric shock – Care should be taken so that objects  
do not fall and liquid is not spilled into the enclosure  
through openings. If a metal objects, such as a hair  
pin or a needle, comes into contact with the inside of  
this appliance, a dangerous electric shock may result.  
For families with children, never permit children to  
put anything, especially metal, inside this appliance.  
2. Power-cord protection – Power-supply cords should  
be routed so that they are not likely to be walked on  
or pinched by items placed upon or against them,  
pay particular attention to cords at plugs, convenience  
receptacles, and the point where they exit from the  
appliance.  
Never pull or stretch  
the cord.  
9. Enclosure removal – Never remove the enclosure.  
If the internal parts are touched accidentally, a serious  
electric shock might occur.  
3. CAUTION – Polarization – This appliance may be  
equipped with a polarized alternating-current line plug (a  
plug having one blade wider than the other). This plug will  
fit into the power outlet only one way. This is a safety  
feature. If you are unable to insert the plug fully into the  
outlet, try reversing the plug. If the plug should still fail to  
fit, contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the polarized plug.  
10.Magnetic fields – Keep the appliance away from  
sources of magnetic fields such as TV sets, speaker  
systems, radios, motorized toys or magnetized  
objects.  
4. Ventilation – Slots and openings in the cabinet are  
provided for ventilation and to ensure reliable operation of  
the appliance and to protect it from overheating, and these  
openings must not be blocked or covered. The appliance  
should be situated so that its location or position does not  
interfere with its proper ventilation.  
11.Cleaning – Unplug this appliance from the wall  
outlet before cleaning. Do not use volatile solvents  
such as alcohol, paint thinner, gasoline, or benzine,  
etc. to clean the cabinet. Use a clean dry cloth.  
To maintain good ventilation, do not put records or a table-  
cloth on the appliance. Place the appliance at least 10 cm  
away from the walls.  
Do not use the appliance on a bed, sofa, rug or similar  
surface that may block the ventilation openings. This  
appliance should not be placed in a built-in installation such  
as a bookcase or rack unless proper ventilation is provided  
or the manufacturer’s instructions have been adhered to.  
12.Accessories – Do not place this appliance on an unstable  
cart, stand, tripod, bracket, or table. The appliance may fall,  
causing serious injury to a child or adult, and serious  
damage to the appliance. Use only with a cart, stand,  
tripod,bracket,ortablerecommendedbythemanufacturer,  
or sold with the appliance. Any mounting of the appliance  
should follow the manufacturer’s instructions, and should  
use a mounting accessory recommended by the  
manufacturer. An appliance and cart combination should  
be moved with care. Quick stops, excessive force, and  
uneven surfaces may cause the appliance and cart  
combination to overturn.  
5. Water and moisture – The appliance should not be  
used near water - for example, near a bathtub,  
washbowl, kitchen sink, laundry tub, in a wet  
basement, or near a swimming pool, etc.  
 
Caution : Read this page carefully to ensure safe operation.  
DPF-3010/2010/1010 (En)  
13.Lightning – For added protection for this appliance during  
a lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent  
damage to the appliance due to lightning and power-line  
surges.  
18.Power lines – An outside antenna system should not be  
located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into such  
power lines or circuits. When installing an outside antenna  
system, extreme care should be taken to keep from  
touching such power lines or circuits as contact with them  
might be fatal.  
5
14.Abnormal smell – If an abnormal smell or smoke is  
detected, immediately turn the power OFF and unplug  
theappliancefromthewalloutlet. Contact your dealer or  
nearest service center.  
19.AC outlets – Do not connect other audio equipment  
with a power consumption larger than that specified  
to the AC outlet on the rear panel. Never connect  
other electrical appliances, such as an iron or toaster,  
to it to prevent fire or electric shock.  
15.Damage requiring service – The appliance should  
be serviced by qualified service personnel when:  
A. The power-supply cord or the plug has been  
damaged.  
B. Objects have fallen, or liquid has been spilled into  
the appliance.  
20. Overloading – Do not overload wall outlets, extension  
cords, or integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
C. The appliance has been exposed to rain or water.  
D. The appliance does not appear to operate normally  
by following the instruction manual. Adjust only those  
controls that are covered by the instruction manual as an  
improperadjustmentofothercontrolsmayresultindamage  
and will often require extensive work by a qualified  
technician to restore the appliance to its normal operation.  
E. The appliance has been dropped, or the enclosure  
damaged.  
21. Attachment – Do not use attachments not recommended  
by the appliance manufacturer as they may cause hazards.  
22. ReplacementpartsWhenreplacementpartsarerequired,  
be sure the service technician has used replacement parts  
specified by the manufacturer or have the same  
characteristics as the original parts. Unauthorized  
substitutions may result in fire, electric shock, or other  
hazards.  
F. Theapplianceexhibitsamarkedchangeinperformance.  
16.Servicing – The user should not attempt to service  
the appliance beyond that described in the instruction  
manual. All other servicing should be referred to  
qualified service personnel.  
23. Safety check – Upon completion of any service or repairs  
to this appliance, ask the service technician to perform  
safety checks to determine that the appliance is in proper  
operating condition.  
17.Outdoor antenna grounding – If an outside antenna  
is connected to the appliance, be sure the antenna  
system is grounded so as to provide some protection  
against voltage surges and built up static charges.  
Article 810 of the National Electrical Code  
ANSI/  
NFPA 70, provides information with respect to proper  
grounding of the mast and supporting structure,  
grounding of the lead-in wire to an antenna discharge  
unit, size of grounding conductors, location of antenna  
discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode. See  
Figure.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE  
ANTENNA  
LEAD IN WIRE  
GROUND  
CLAMPS  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
Notes:  
1. Item 3 is not required except for grounded or polarized equipment.  
2. Item 17 and 18 are not required except for units provided with  
antenna terminals.  
GROUND CLAMP  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
3. Item 17 complies with UL in the U.S.A.  
NEC – NATIONAL ELECTRICAL CODE  
 
System connections  
DPF-3010/2010/1010 (En)  
Malfunction of microcomputer  
Caution:  
If operation is not possible or erroneous display appears even  
though all connections have been made properly, reset the  
microcomputer referring to “In case of difficulty”.  
Do not plug in the power lead until all connections are com-  
pleted.  
6
Make connections as shown below.  
When connecting the related system components, refer also to the  
instruction manuals of the related components.  
Caution regarding placement  
To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer  
dimensions including projections) equal to, or greater than, shown below.  
Left and right panels: 10 cm  
Rear panel: 10 cm  
DIGITAL OUTPUT jack  
(DPF-3010/DPF-2010 only)  
SL 16/XS8 switch 8  
OUTPUT  
DIGITAL  
OUTPUT  
OPTICAL  
SYSTEM CONTROL  
ƒ
L
SL 16 XS-8  
R
To AC outlet  
Remove the  
protection cap  
when using the  
DIGITAL OUTPUT  
(OPTICAL) jack.  
SYSTEM  
CONTROL  
System control cord  
CD  
L
Audio cord  
R
To wall AC outlet  
Amplifier  
DIGITAL  
INPUT  
OPTICAL  
Commercially-available  
optical fiber cable  
To AC outlet  
MD recorder  
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.  
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging  
connection cords without removal of the power cord can cause malfunctions or damage to the unit.  
NNootteess  
 
DPF-3010/2010/1010 (En)  
7
Connection to a general-use amplifier  
Use the provided audio cords to connect the OUTPUT jacks of this unit to the CD input jacks (or AUX jacks) of the amplifier.  
Connection to digital amplifier or MD (only for DPF-3010/2010)  
ConnecttheDIGITALOUTPUT(OPTICAL)jacktothedigitalinputjack  
of the amplifier, DAT recorder, MD recorder, etc., using an optical  
fiber cable which are commercially available in audio stores.  
÷When using an optical fiber cable to connect this unit to a digital  
amplifier, insert the plug straight into the jack until a snap sound is  
heard.  
Optical fiber cable  
÷Be careful not to bend, coil, or bundle the optical fiber cable.  
÷Optical fiber cables available on the market may not always be able to  
be used with this player. If your cord cannot be used with this unit,  
consult the store from which you purchased the cord or your nearest  
dealer.  
Adjusting the output levels of the output jacks  
andheadphoneoutput(onlyforDPF-3010/2010)  
The OUTPUT level (UP/DOWN) keys of the remote control unit can  
adjust the output levels from the LINE/OUT jacks and PHONES jack  
(DPF-3010 only) of the unit.  
SINGLE TIME  
OUTPUT  
DOWN  
UP  
_
1 2 db  
Output level  
÷Itisnotfavorableforthesoundqualitytodecreasetheoutputlevelfrom  
this unit too much. Use these keys for coordination with other line  
levels.  
÷Adjusting the headphone output level also changes the LINE/OUT  
level. Do not adjust the output level from this unit particularly during  
recording.  
÷Please note that the sound output is at the maximum level when the  
power is turned on.  
To use the headphone (only for DPF-3010)  
Connect a stereo headphone to the PHONES jack of the CD player.  
Adjust the sound volume using the remote control unit.  
 
DPF-3010/2010/1010 (En)  
8
SYSTEM  
CONTROL  
SYSTEM CONTROL CONNECTIONS  
Connecting system control cords after connecting a KENWOOD  
audio component system lets you take advantage of convenient  
system control operations.  
There are two KENWOOD system control modes. Make connec-  
tions according to the groups of terminal symbols shown below.  
SYSTEM  
CONTROL  
[XS8] Mode  
[SL16] Mode  
:
:
lets you combine F, f, and ƒ terminals  
for terminals only  
SYSTEM  
CONTROL  
This unit is compatible with both [XS8] and [SL16] modes.  
÷
÷
When all units in system control connection are set to [XS8]  
mode, set the SYSREM CONTROL selector switch on the rear  
to the [XS8] side and connect.  
When all units in system control connection are set to [SL16]  
mode, set the SYSREM CONTROL selector switch on the rear  
to the [SL16] side and connect.  
SYSTEM  
CONTROL  
SL16 XS 8  
SYSTEM  
CONTROL  
SYSREM CONTROL  
selector switch  
j
÷Do this operation after completing all connections.  
(Ensure that the unit is set to STANDBY mode.)  
1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8]  
equipment for system operations. If your equipment consists of this  
kind of combination, please do not connect any system control cords.  
NNootteess  
Even without system control cords, normal operations can be car-  
ried out without affecting performance.  
2. If your amp or receiver does not have a system control terminal, do  
not connect any system control cords to the system control terminals  
on the other components.  
3. Do not connect system control cords to any components other than  
those specified by Kenwood. It may cause a malfunction and damage  
your equipment.  
4. Be sure the system control plugs are inserted all the way in to the  
system control terminals.  
SYSTEM CONTROL OPERATIONS  
Remote Control  
Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.  
Automatic Operation (Except [XR] equipment)  
Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.  
Synchronized Recording (Except [XR] equipment)  
Lets you synchronize recording with the start of playback when recording from CD. Also, the simple CCRS operation lets you make great recordings  
from CD.  
See the operating instructions supplied with your cassette deck and MD recorder for details.  
 
Maintenance  
DPF-3010/2010/1010 (En)  
Disc handling precautions  
9
Cleaning  
Handling  
Hold compact discs so that you do not  
touch the playing surface.  
If fingerprints or foreign matter become  
attached to the disc, lightly wipe the  
disc with a soft cotton cloth (or similar)  
from the center of the disc outwards,  
in a radial manner.  
Label side  
÷Do not attach paper or tape to either  
the playing side or the label side of  
compact discs.  
Playing  
side  
Sticker  
÷The paste left on the label surface after  
a sticker has been peeled off is a factor  
which may cause malfunction. If the  
surfaceisstickyduetoremainingpaste,  
be sure to clean it with alcohole before  
use.  
Storage  
When a disc is not to be played for a  
long period of time, remove it from the  
CD player and store it in its case.  
Sticky paste  
Never play a cracked or warped disc.  
Caution on disc used  
During playback, the disc rotates at high speed in the player.  
Therefore, to avoid danger, never use a cracked or deformed disc or a  
disc repaired with tape or adhesive agent.  
Do not use cleaning discs.  
Please do not use commercially available cleaning discs, they may dam-  
age the internal mechanism.  
Discs which can be played with this unit  
Cleaning  
CD (12 cm, 8 cm), CDV (only the audio part)  
÷With CD-G (CD Graphics) discs, this unit can play only the audio.  
Note related to transportation and movement  
Do not use volatile solvents such as alcohol, paint thinner, gasoline,  
or benzine, etc. to clean the cabinet. Use a clean dry cloth.  
Before transporting or moving this unit, carry out the following  
operations.  
Do not use contact cleaners because it could cause a malfunction.  
Be specially careful against contact cleaners containing oil, for they  
may deform the plastic components.  
1. Turn the power ON but do not load a disc.  
2. Verify that the display shown appears.  
TRACK  
1
6
2
7
3
8
4
9
5
10  
11  
12 13 14 15  
16 17 18 19 20  
no d 1 S C  
3. Wait a few seconds and set the unit to STANDBY mode.  
CD accessories  
The CD accessories (stebilizer, protection sheet, protection ring, etc.)  
which are marketed for improving the sound quality or protecting discs  
as well as the disc cleaner should not be used with this system be-  
cause they may cause malfunction.  
Caution on condensation  
Be specially cautious against condensation in a following circumstance:  
Condensation (of dew) may occur inside the unit when there is a  
great difference in temperature between this unit and the outside.  
This unit may not function properly if condensation occurs. In this  
case, leave the unit for a few hours with the power left ON, and  
restart the operation after the condensation has dried up.  
When this unit is carried from a place to another across a large  
difference in temperature, when the humidity in the room where this  
unit is installed increases, etc.  
 
Controls and indicators  
DPF-3010/2010/1010 (En)  
10  
REPEAT indicator  
Program  
CCRS indicator  
EDIT indicator  
SINGLE TIME indicator  
TOTAL TIME indicator  
check indicator  
REPEAT  
TRACK  
NO.  
CCRS  
EDIT  
P.C.  
TRACK  
PGM  
1
6
11  
2
7
3
8
4
9
5
10  
SINGLE TIME  
TOTAL TIME  
TRACK mode indicator  
Program mode indicator  
12 13 14 15  
_
16 17 18 19 20  
:
8 8 8 8 88  
TIME indicator,  
Pause indicator  
program No.  
Output level indicator  
Play track No. indicator  
Play indicator  
Music calender  
The figure shows an example  
for the DPF-3010  
DISPLAY  
1
2 34  
5
6
78  
STOP  
PLAY/PAUSE  
0
7
6
ON/STANDBY  
PHONES  
1
4
7
0
2
5
8
3
6
4
¢
P.MODE  
EDIT  
CHECK PEAK SEARCH  
1
¡
9
REPEAT  
RANDOM  
CLEAR TIME DISPLAY  
+10  
*
9
0 !@  
#
$
%
^ &  
Thekeyswiththesamenameasthoseontheremotecontrol  
unit operate the same way as the remote control unit.  
0EDIT key  
Press to select the edit recording mode.  
!CLEAR key  
Press to clear the contents of a program.  
@TIME DISPLAY key  
Press to switch the time display mode.  
#Remote control light sensor  
(DPF-3010/2010 only)  
*
1ON/STANDBY (  
Turns the unit ON/STANDBY.  
2P.MODE key  
Press for program playback.  
3CHECK key  
Press to display the programmed contents in order.  
4PEAK SEARCH key  
) switch  
@
$
%(  
#
%(  
(
!
$Disc tray  
Load the disc to be played back.  
%Numeric keys  
Use the numeric keys to select the desired track.  
^REPEAT key  
Press to start repeated playback.  
&RANDOM key  
Press to start random playback.  
* Search keys (1,¡)  
Fast forwards or fast reverses the track.  
@
5Open/Close key (0)  
Opens and closes the disc tray.  
6STOP key (7)  
@
#
@
^
7PLAY/PAUSE key (6)  
@
Each time the key is pressed, playback and pause switch  
each other.  
)
8Skip keys (4,¢)  
#
7
#
Press to skip to the beginning of another track.  
9PHONES jack (DPF-3010 only)  
Use to connect (optional) headphones.  
 
(DPF-3010/DPF-2010 only)  
Operation of remote control unit  
DPF-3010/2010/1010 (En)  
The keys with the same name as those on the main unit operate the same way as the main unit.  
The keys marked * are provided only on the remote control unit.  
11  
1 Program-related and other keys  
RANDOM key  
*2OUTPUT (DOWN, UP) key  
7
DISC SELECTOR  
2
RANDOM  
REPEAT  
P.MODE  
1
4
3
)
^
$
#
*
REPEAT key  
3Numeric keys ( 1 ~ ) , 0 ) #  
5
2
DISC SKIP  
3
P.MODE key  
1
1
TIME DISPLAY key  
EDIT key  
4 Basic function keys  
Skip keys (4,¢)  
Search keys (1,¡)  
Stop key (7)  
#
#
@
@
TIME  
DISPLAY  
4
7
5
8
6
9
CHECK key  
CLEAR key  
%(  
%(  
3
4
EDIT  
Play/Pause key (6)  
CHECK  
CLEAR  
0
+10  
6
7
4
1
¢
¡
OUTPUT  
DOWN  
UP  
2
REMOTE CONTROL UNIT  
RC-P0305  
Model: RC-P0305  
Infrared ray system  
Loading batteries  
1 Remove the cover.  
2 Insert batteries.  
3 Close the cover.  
2
2
1
1
÷ Insert two AA-size (R6) batteries as  
indicated by the polarity marking.  
Operation  
After plugging in the power cord, press the ON/STANDBY  
) switch of the main unit to turn the unit ON. When the  
Remote control  
light sensor  
(
unit is turned ON, press the key of the function to be  
operated.  
6m  
30  
30  
Operating range  
(Approx.)  
÷When pressing more than one remote control key successively,  
press the keys securely by leaving an interval of 1 second or more  
between keys.  
REMOTE CONTROL UNIT  
RC-P0305  
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.  
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.  
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor.  
In such a case, change the system installation position to prevent the malfunction.  
NNootteess  
 
Normal play (TRACK mode)  
UsethefollowingproceduretoplayaCDintheoriginalorder  
of tracks from track No. 1.  
DPF-3010/2010/1010 (En)  
The figure shows an example for the DPF-3010  
12  
7
6
4
1
¢
¡
: Keys and control used in the operations described on this page.  
Playing tracks in order from track No. 1  
1Press the ON/STANDBY switch to ON.  
ON/STANDBY  
÷Playback starts when a disc has been loaded.  
2Load a disc.  
Open the tray.  
Place a disc.  
1
2
0
÷Do not touch the played side of disc.  
÷Loading two discs together will cause malfunctioning.  
÷Place the disc properly along the groove on the tray. (If the disc is not  
placed horizontally, malfunction will result.)  
Label side  
÷A single CD (8 cm disc) can also be played.  
÷Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be  
used with this unit.  
7
6
4
1
¢
¡
Disc tray  
Lights up.  
Close the tray.  
3
TRACK  
1
6
2
7
3
8
4
9
5
10  
TRACK  
NO.  
SINGLE TIME  
0
:
0 00  
0 1  
The track Nos. recorded on the CD are displayed.  
3Start playback.  
÷After a few seconds, play starts from the track No. 1.  
Elapsed time of track being played  
PLAY/PAUSE  
TRACK  
1
6
2
7
3
8
4
9
5
10  
TRACK  
NO.  
6
SINGLE TIME  
:
0 05  
0 1  
Track NO. being played  
To pause playback  
To stop playback  
STOP  
PLAY/PAUSE  
TRACK  
6
7
Lights up.  
÷Each press pauses and plays the CD alternately.  
 
DPF-3010/2010/1010 (En)  
Playback from desired track  
Press the numeric keys as shown below....  
13  
1
4
7
0
2
5
8
3
6
To enter track No. 23 : 003  
To enter track No. 40 : 0000)  
9
÷Playback starts from the selected track and continues on the subse-  
quent tracks.  
+10  
Skipping tracks  
To skip  
forward  
To skip  
backward  
4
¢
÷The track in the direction of the pressed key is skipped, and the selected  
track will be played from the beginning.  
÷When the 4 key is pressed once during playback, the track being  
played will be played from the beginning.  
Searching  
Backward  
search  
Forward  
search  
1
¡
÷Playback starts from the position where the key is released.  
Time display on CD player (TIME DISPLAY)  
Each press of the TIME DISPLAY key changes the displayed contents.  
SINGLE TIME  
: Elapsed time of track being played (SINGLE TIME  
lights up.)  
1
1:23  
SINGLE TIME  
TIME DISPLAY  
: Remaining time of track being played (SINGLE  
TIME lights up.)  
2
_2:37  
TOTAL TIME  
: Elapsed time of entire disc (TOTAL TIME lights  
up.)  
: Remaining time on entire disc (TOTALTIME lights  
up.)  
3
4
23:45  
TOTAL TIME  
_36:15  
÷Only the display 1 and 2 will be displayed in RANDOM and EDIT  
modes.  
 
Programmed play (PGM mode)  
Use the following procedure to program desired tracks in a  
desired order. (up to 20 tracks)  
DPF-3010/2010/1010 (En)  
The figure shows an example for the DPF-3010  
14  
Preparation  
÷ Load a disc in the CD player.  
@
7
6
4
1
¢
¡
: Keys and control used in the operations described on this page.  
1Press so that the “PGM” indicator lights.  
Do this operation in the stop mode.  
Lights up.  
P.MODE  
TRACK  
NO.  
PGM  
0 1  
2Program desired tracks.  
1Select the desired track No.  
Press the numeric keys as shown below....  
To enter track No. 25: 005  
Displays the entered program No.  
for a few seconds.  
Displays the total playing time  
of the programmed tracks.  
1
4
7
0
2
5
8
3
6
TRACK  
NO.  
TRACK  
NO.  
TOTAL TIME  
_
:
0 2 P _ 01 0 2 1 6 42  
9
+10  
Go to step 2 within 5 seconds.  
2Set the entry.  
÷Up to 20 tracks can be programmed. When “FULL” is displayed, no  
more tracks can be programmed.  
P.MODE  
÷If you make a mistake, press the CLEAR key and enter the track No.  
from the beginning.  
÷When the total playing time of the programmed tracks exceeds 100  
minutes, the remaining time on the disc will not be displayed any more.  
3Repeat steps 1and 2 above.  
3Start playback.  
PLAY/PAUSE  
÷When the 4 or ¢ key is pressed during playback, the track will be  
skipped in the direction of the pressed button.  
÷When the 4 key is pressed once during playback, the play position  
returns to the beginning of the current track being played.  
6
To stop playback  
STOP  
7
÷The programmed contents remain in memory.  
 
DPF-3010/2010/1010 (En)  
Auto space function  
During programming of tracks, a non-recorded space of a few  
secondswillbeautomaticallycreatedbetweentracks. Byrecording  
tracks with these spaces on tape, the search and repeat play  
operations of tape using the DPSS function (which works by  
searching the non-recorded spaces) can be performed reliably.  
15  
÷ Even when the performances of two tracks are continuous (which  
occurs with classical or live recording music), the spaces will be  
created if they have different track numbers.  
To check or change the programmed tracks  
Lights up.  
1 Press the CHECK key.  
3
TRACK  
NO.  
CHECK  
Press until the track No. to  
be changed is displayed.  
PGM  
P.C.  
6
0 6 P _ 02  
2Select the new track No.  
÷Perform only step 1 to simply check the program.  
÷Each time the key is pressed, the program No. (P-No.) and the track No.  
on CD are displayed.  
1
4
7
0
2
5
8
3
6
÷The previous display resumes in a few seconds.  
9
+10  
3 Set the entry.  
÷Press it while the “P.C.” indicator is lit.  
÷The track being played cannot be changed.  
P.MODE  
To add a track to the program  
1Select the desired track No.  
1
4
7
0
2
5
8
3
6
9
+10  
÷When a track No. is selected, the track will be added to the end of the  
existing program.  
2 Press the P.MODE key.  
To clear tracks from the program  
Press to clear tracks from the end.  
CLEAR  
÷Each time the key is pressed, the last track in the program is cleared.  
÷The tracks which are programmed earlier than the track being played  
cannot be cleared.  
To clear all track.  
P.MODE  
÷Selected tracks can be also completely cleared just by operating the 0  
key.  
÷The entire program is cleared.  
 
Repeated playback  
DPF-3010/2010/1010 (En)  
Preparation  
÷ Load a disc in the CD player.  
@
The figure shows an example for the DPF-3010  
16  
7
6
4
1
¢
¡
: Keys and control used in the operations described on this page.  
To repeat only the programmed tracks  
Press so that the "PGM" indicator lights.  
1
Lights up.  
P.MODE  
TRACK  
NO.  
PGM  
0 1  
Dothisoperationinthestopmode.  
Select the desired track No.  
2
Press the numeric keys as shown below...  
÷All of the programmed tracks will be repeated.  
005  
÷In case only one track is programmed, only that track will be repeated.  
÷Up to 20 tracks can be programmed. When FULLis displayed, no  
more tracks can be programmed.  
To enter track No. 25:  
1
4
7
0
2
5
8
3
6
9
+10  
Go to step 3 within 5 seconds.  
Set the entry.  
3
P.MODE  
Repeat steps 2 and 3 above.  
4
5
Lights up.  
Switch REPEAT ON.  
REPEAT  
TRACK  
NO.  
REPEAT  
PGM  
0 1  
Start playback.  
6
PLAY/PAUSE  
6
To cancel repeated playback  
Goes off.  
Press the REPEAT key again.  
REPEAT  
TRACK  
NO.  
REPEAT  
PGM  
0 1  
 
DPF-3010/2010/1010 (En)  
The figure shows an example for the DPF-3010  
17  
7
6
4
1
¢
¡
: Keys and control used in the operations described on this page.  
To repeat the entire disc  
Press so that the “TRACK” indicator  
lights.  
1
Lights up.  
TRACK  
TRACK  
NO.  
P.MODE  
0 1  
Switch REPEAT ON.  
2
Lights up.  
REPEAT  
TRACK  
NO.  
TRACK  
REPEAT  
0 1  
Start playback.  
3
PLAY/PAUSE  
6
To cancel repeated playback  
Goes off.  
Press the REPEAT key again.  
REPEAT  
TRACK  
NO.  
TRACK  
REPEAT  
0 1  
 
Editing  
DPF-3010/2010/1010 (En)  
The following procedure allows to record a CD within the  
specified tape length so that no music is interrupted in the  
middle at the ends of sides A and B.  
The figure shows an example for the DPF-3010  
18  
Preparation  
÷ Load a disc in the CD player.  
@
7
6
4
1
¢
¡
: Keys and control used in the operations described on this page.  
1Light the “EDIT” indicator.  
Do this operation in the stop mode.  
Lights up.  
Lights up.  
EDIT  
EDIT  
PGM  
Go to step 2 within 5 seconds.  
If more than 5 seconds have elapsed,  
press the key again.  
C _ __  
Blinks.  
2 Enter the recording time of the tape.  
Press the numeric keys as shown below.  
30-minute tape : 000)  
46-minute tape : 00006  
1
4
7
0
2
5
8
3
6
9
÷Recording within 99 minutes can be specified in minutes (2 digits).  
÷While you can edit with a different time setting to that of the tape you  
are using, part of the tape may be left with nothing recorded on it, or the  
last track on side A or side B may be cut short.  
+10  
The CD contents are edited as follows.  
(1) The tape recording time input is divided by two, and tracks that can  
be accommodated in file A(which refers to tracks on tape side A) are  
selected in order of their track Nos.  
Playing or recording the edited contents  
Press the 6 key to start playback according to the edited content. The  
playback pauses at the beginning of the track edited for tape side B. Press  
the 6 key again to continue playback.  
(2) In a few seconds, the time left on tape side A is displayed, then file  
B (tracks on tape side B) is edited in the same manner.  
When recording the edited content onto a tape, it is recommended to  
use the synchro recording or CCRS recording function of KENWOOD  
cassette decks.  
÷The EDIT function may not operate properly for discs having only one  
track or having tracks of long duration such as classical music.  
(“no FILE” is displayed.)  
÷Do not adjust the output level from this unit particularly during record-  
ing.  
÷For details, see the instruction manual of the cassette deck.  
 
DPF-3010/2010/1010 (En)  
The figure shows an example for the DPF-3010  
19  
7
6
4
1
¢
¡
: Keys and control used in the operations described on this page.  
To check the edited contents  
Lights up.  
A
5
EDIT  
P.C.  
CHECK  
F I LE  
÷When the CHECK key is pressed, track numbers and remaining time  
in the file A are displayed first, then those in the file B.  
÷The "P.C." indicator goes off in a few seconds.  
To clear the edited contents  
Press any one of these keys.  
CLEAR  
P.MODE  
0
÷The edited data is cleared entirely.  
Peak search  
This function identifies the highest peak level of the entire recording on a CD before recording the CD on the cassette deck.  
With this unit, after the peak level of each track recorded on the CD has been searched, the section of the music containing the highest peak level will be  
played repeatedly so that the recording level of the cassette deck or MD (analog recording) can be adjusted easily.  
This feature is particularly convenient when using a cassette deck with manual recording level adjustment which does not have the automatic recording  
level adjustment function.  
(This unit cannot perform peak search recording when used with a cassette deck equipped with the peak search function.)  
÷ Press the PEAK SEARCH key.  
PEAK SEARCH  
÷ After a high-speed search of all tracks, the searched peak level section  
will be repeated at normal speed.  
÷ The peak level is detected by sampling the section which seems to  
contain the maximum level in the disc. However, it may happen that  
the transient maximum level is not detected. Therefore, it is  
recommended to set the recording level by leaving a certain margin  
above the detected peak level.  
To cancel Peak search:  
Press the 7 key.  
STOP  
7
 
Playback in a random order (Random playback)  
DPF-3010/2010/1010 (En)  
As tracks are selected at random, you can enjoy listening to  
for a long time.  
The figure shows an example for the DPF-3010  
20 Preparation  
÷ Load a disc in the CD player.  
@
7
6
4
1
¢
¡
: Keys and control used in the operations described on this page.  
Press the P.MODE key so that the "TRACK"  
indicator lights.  
1
If the "PGM" indicator is lit, press the  
P.MODE key.  
Lights up.  
TRACK  
1
6
2
7
3
8
4
9
5
10  
TRACK  
NO.  
SINGLE TIME  
P.MODE  
:
0 00  
0 1  
2Press the RANDOM key.  
In case track No. 5 is selected  
TRACK  
TRACK  
NO.  
SINGLE TIME  
RANDOM  
:
0 5  
0 12  
÷Each time a track ends, another track is selected and played.  
÷Random play stops after all of thetracks have been played once.  
÷The random playback can also be repeated by pressing the REPEAT  
key.  
To cancel random playback  
To select another track in the middle of playing one  
RANDOM  
¢
÷Pressing the 4 key once returns to the beginning of the track being  
played.  
÷Press the RANDOM key to start normal playback.  
 
Timer operations  
DPF-3010/2010/1010 (En)  
This unit  
Timer playback of CD can be started at any time using an  
audio timer which is available in audio stores.  
7
6
4
1
¢
¡
System control cord  
Audio cord  
21  
Preparation  
÷ Connect the power cords of the associated  
components so that their power can be turned  
ON through the audio timer.  
(Also, be sure to read carefully the instruction  
manual of the timer.)  
Amplifier  
12 F00  
Audio timer  
To wall AC outlet  
÷ If the amplifier is not connected to the CD player through a system  
control cord, select the “CD” input with the input selector.  
Turn the powers of the associated components  
ON.  
1
2Preparation  
Load a disc in the CD player.  
@
Label side  
7
6
4
1
¢
¡
3Set the amplifier volume.  
Play the disc.  
1
PLAY/PAUSE  
6
Adjust the amplifier volume.  
(Use the remote control unit of this unit  
to adjust the volume to the maximum  
level.)  
2
3
Adjusting the volume:  
Set the volume the maximum (0 dB) using the OUTPUT  
(UP) key on the remote control unit, and adjust the vol-  
ume to the desired level on the amplifier side.  
(Since the sound output is at the maximum level when the  
power is turned on, lowering the level with the remote control  
will change the volume.)  
NNoottee  
Stop the disc.  
STOP  
7
4Set the timer ON time.  
Set the timer so that it supplies  
power at the specified time.  
÷With some audio timer models, the power is automatically turned OFF  
when the timer ON time is set. With such a model, skip step 5 below.  
5Turn OFF the power output from the audio timer.  
÷Do not touch the ON/STANDBY switches of the amplifier and CD  
player.  
÷When the set time comes, the disc playback starts automatically.  
1. Some amplifiers cannot be used with a timer. Before using a amplifier, check it.  
2. When operating the unit other than CD player using an audio timer, be sure to remove the disc from the CD player.  
NNootteess  
 
In case of difficulty  
DPF-3010/2010/1010 (En)  
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the  
table below to see if the problem can be corrected before seeking help from your dealer or service representative.  
22  
Operation to reset  
The microcomputer may fall into malfunction (impossibil-  
Set the unit to STANDBY mode by pressing the ON/  
ity to operate, erroneous display, etc.) when the connec-  
STANDBY (  
unitONbypressingtheON/STANDBY(  
) key, and after a few seconds, turn the  
)keyagain.  
tion cords are unplugged while unit is ON or due to an  
external factor. In this case, execute the following method  
to reset the microcomputer and return it to normal condi-  
tion.  
÷Please be aware that resetting the CD player will erase all stored  
information and return it to the factory settings.  
CD player unit  
Symptom  
Cause  
Remedy  
÷ Insert the power plug firmly to the AC outlet.  
÷ Turn the amplifier’s power ON.  
÷ Power plug is loosely connected.  
÷ Withthepowerplugconnectedtotheswitched  
AC outlet of an amplifier, the power of the  
amplifier is turned off.  
The unit is not turned ON with the ON/  
STANDBY switch ON.  
÷ Disc is loaded upside down.  
÷ Disc is loose.  
÷ Load the disc again with its label side up.  
Disc is loaded, player does not play.  
÷ Insert the disc properly.  
÷ Disc is dirty.  
÷
Wipe off the dust on the surface of the disc  
referring to “Disc handling precautions”.  
÷ Replace the disc with a new one.  
9
÷ Disc is cracked.  
÷ Condensation has occurred on the optical lens ÷ Leave the player for about 1 hour so that the  
unit.  
condensation is removed.  
9
÷ Play mode is not entered.  
÷ Press the 6 key.  
No sound.  
÷ Disc is too dirty.  
÷Wipe off the dust on the disc surface referring  
to “Disc handling precautions”.  
÷ Replace the disc with a new one.  
÷ Connect all connection cords firmly.  
÷ Adjust the output level with OUTPUT key on  
the remote control unit.  
9
÷ Disc is cracked.  
÷ The connection cords are inserted loosely.  
÷ Output level is attenuated too low.  
7
÷ Disc is too dirty.  
Music is interrupted. (Sound is skipped.)  
÷Wipe off the dust on the disc surface referring  
to “Disc handling precautions”.  
9
÷ Disc is cracked.  
÷ Oscillation is applied to this unit.  
÷ Replace the disc with a new one.  
÷ Try selecting a place where no strong vibra-  
tions occur by changing the installation place,  
etc.  
÷ This unit is designed so that play begins auto-  
matically when the unit is turned ON if a disc  
is already loaded.  
Play begins as soon as the unit is turned  
ON.  
÷ If automatic play is not required, remove the  
disc from the player before setting the unit to  
STANDBY mode.  
Remote control unit  
Symptom  
Cause  
Remedy  
÷Batteries are exhausted.  
÷Replace with new batteries.  
÷Operate the remote control unit within the  
controllable range.  
!
Remote control operation is not possi-  
ble.  
÷The remote control unit is too far away from  
the main system, controlling angle is too large,  
or there is an obstacle in between.  
!
 
Specifications  
DPF-3010/2010/1010 (En)  
[ Format ]  
System ..................................................................................... Compact disc digital audio system  
Laser ................................................................................................................ Semiconductor laser  
23  
[ D/A Convertors ]  
D/A Conversion .......................................................................................................................... 1 Bit  
Oversampling ........................................................................................................... 8 fs (352.8 kHz)  
[ Audio ] (for DPF-3010)  
Frequency response..................................................................................... 4 Hz ~ 20 kHz, 0.5 dB  
Signal to noise ratio............................................................................................ More than 100 dB  
Dynamic range ...................................................................................................... More than 95 dB  
Total harmonic distortion + noise ..................................................... Less than 0.006% (at 1 kHz)  
Channel separation .............................................................................. More than 95 dB (at 1 kHz)  
Wow & flutter .................................................................................................. Unmeasurable Limit  
Output level/impedance  
Variable ....................................................................................................... (Max.) 2.0 V/0.8 k  
Digital output  
Optical...................................................................................................... –15 dBm – –21 dBm  
(Wave length 660 nm)  
Headphone output (Max.) ..........................................................................................20 mW (32 )  
[ Audio ] (for DPF-2010/1010)  
Frequency response..................................................................................... 6 Hz ~ 20 kHz, 0.5 dB  
Signal to noise ratio.............................................................................................. More than 94 dB  
Dynamic range ...................................................................................................... More than 92 dB  
Total harmonic distortion + noise ..................................................... Less than 0.007% (at 1 kHz)  
Channel separation .............................................................................. More than 90 dB (at 1 kHz)  
Wow & flutter .................................................................................................. Unmeasurable Limit  
Output level/impedance  
Variable  
Fixed  
(only DPF-2010) ................................................................ (Max.) 2.0 V/0.8 kΩ  
(only DPF-1010) ............................................................................ 2.0 V/0.8 kΩ  
Digital output (only DPF-2010)  
Optical...................................................................................................... –15 dBm – –21 dBm  
(Wave length 660 nm)  
[ General ]  
Power consumption.................................................................................................................. 12 W  
Dimensions ................................................................................................. W : 440 mm (17-5/16")  
H : 95 mm (3-3/4")  
D : 370 mm (14-9/16")  
Weight (Net) ................................................................................................................ 4.3 kg (9.5 lb)  
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.  
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).  
NNootteess  
 
For your records  
Record the serial number, found on the back of the unit, in the spaces  
designated on the warranty card, and in the space provided below. Refer  
to the model and serial numbers whenever you call upon your dealer for  
information or service on this product.  
Model  
Serial Number  
 

Ingersoll Rand Heat Pump 72633 D User Manual
IOGear Network Card GPS702e3W6 User Manual
JL Audio Car Speaker SB SC XB 10W3v3 4 User Manual
John Lewis Washer Dryer JLWM 1203 User Manual
JVC Universal Remote RM LP57 User Manual
Kawasaki Automobile Parts JS800A3 User Manual
Kenmore Refrigerator 241579602 User Manual
Kenwood MP3 Player M1GC7 User Manual
KitchenAid Water Dispenser KHWG160YWHO User Manual
Kompernass CD Player KH 2300 User Manual