8" HH JOINTER
This 8" jointer boasts a full 2HP motor and a helical style cutterhead.The indexable car-
bide inserts make blade changes easier than ever before and provide unmatched surface
finish; and a much quieter cut. Extra long cast iron beds allow for more accurate flat
edges and faces on your material.The paddle style power switch can be mounted either
below or above the infeed table.
Helical head with indexable
carbide inserts makes better
finish cuts in material.
jettools.com
Stock No. 900452
10m 07/07
©2007 WmH TOOL GROUP, Inc. All Rights Reserved.
|