Kramer Electronics Work Light T5F 13 User Manual

Mounting the Inserts  
The Kramer T5F-13 Inner Frame  
user manuals and the complete list of Kramer wall plates and  
module connectors.  
Congratulations on purchasing your Kramer T5F-13 inner frame for the TBUS-5xl Table  
i
Connection bus.  
You can rearrange or remove any of the plates mounted on the inner frame and replace them  
The T5F-13 inner frame includes:  
with Kramer passive wall plates or connector modules for interfacing A/V type signals.  
An opening for 1 power socket  
2 blank inserts  
1 cable pass-through insert  
To mount a Kramer insert or connector module:  
1. Unscrew the two screws that fasten the blank plate to the inner frame and remove the  
blank plate.  
2. Place the required Kramer insert over the opening, insert the two screws to fix the  
Kramer insert in place, and tighten them.  
Installing the Assembled Inner Frame  
To install the T5F-13 inner frame:  
1. Place the assembled inner frame inside the TBUS-5xl enclosure.  
2. Set the required height using your fingers to bring the inner frame to the desired  
position, screw and tighten it in place using the height adjustment screws supplied with  
the inner frame.  
Connecting the Cables  
Figure 1: T5F-13 Inner Frame (P/N: 80-004099)  
When replacing blank inserts with connector inserts (for example, VGA, audio, HDMI and so  
on):  
Power Socket and Power Cord Options  
1. Insert the cables to their appropriate connectors from underneath.  
Various power sockets and power cords are available to use with the T5F-13, as described in  
the “TBUS Modular Power Socket Installation and Power Cord” Installation Instructions,  
supplied with the power socket.  
2. Secure the cables to the tie holes on the TBUS-5xl.  
Do not secure the cables too tightly or too loosely. Leave a small amount of slack.  
After the TBUS-5xl is connected to mains power and the proper cables, it is ready for use.  
Each power socket comes with detailed assembly instructions.  
i
The T-2INSERT Kit Option (80-00006699)  
You can install the T-2INSERT kit (which includes 1 pass-through insert and a blank insert)  
instead of a power socket.  
 

Intel Server S5500WB User Manual
ION Drums Drum Rocker User Manual
ION Turntable LP 2 FLASH User Manual
Jabra Bluetooth Headset GN2100 User Manual
JL Audio Speaker FS110 W5 User Manual
JVC Gas Heater CA MXJ900 User Manual
JVC MP3 Player RC BM5 User Manual
Kenmore Water Heater 153330401 User Manual
Kenwood Stereo Receiver KRF V4530D User Manual
Keys Fitness Treadmill KF T4 0 User Manual