iDM12
portable rechargeable
Bluetooth stereo speaker
pairing
instruction manual
iDM12
Introduction
Thank you for purchasing the iHome iDM12. This product is designed to
provide high quality wireless sound for your iPad, iPhone, iPod, computer,
PDA or other Bluetooth audio device.
Along with the included Quick Bluetooth Connection Guide,this instruction
booklet explains the basic operation and care of the unit. Please read them
carefully and keep for future reference.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
• Protect your furniture when placing your unit on a natural wood and
lacquered finish. A cloth or other protective material should be placed
between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as Benzene, thinner or similar materials can
damage the surface of the unit.
iDM12
Table of Contents
Meet Your iDM12 ....................................................................... 1-2
Charging the Unit...........................................................................3
Using Bluetooth:Pairing Your Device...................................................4
Playing Audio Via Bluetooth..............................................................5
Playing Audio Via Aux.....................................................................6
Internal Rechargeable Lithium-ion Battery.............................................7
Consumer Product Safety Guide..................................................... 8-9
Troubleshooting............................................................................10
iDM12
Meet Your iDM12
Volume Down
Button
Power
Button
Top/Front
Volume Up
Button
Play/Pause/Pairing
Button
Power/Charging/Pairing
Indicator Light
pairing
Rear
Bluetooth/Aux Switch
Micro USB Charging Port
1
Fold out speaker stand
(pull out to keep unit upright)
Included
iDM12
pai
ri
n
g
• iDM12 system
• Magnetic cover/foldout iPad stand
• Micro USB to USB/3.5 mm audio cable
pa
iri
ng
The unit includes a
magnetic travel
A
B
Place stand on a
flat, stable surface.
Dock iPad into
groove. iPad should
not be in a case or
skin. For best
cover that doubles
as an iPad stand. To
use as a stand, fold
out the feet on its
bottom. For travel,
fold up feet and
stability,dock iPad in
landscape mode.
place cover on the
front of the unit.
2
Using the
iDM12
Charging the Unit
1.Connect the micro USB plug to
the micro USB charging port on
the back of the unit.
2.Connect the standard USB plug
end of the cable to a power USB
port on a computer or other USB
charging device. For first time
use, charge unit for about 8
hours.
3. A green light flashes while the
unit is charging and glows
steadily when unit is fully
charged. If unit is not
USB 2.0
NOTE: When unit is on and not
connected to power source,
flashing green light indicates
battery needs charging.
powered on when micro USB
plug is connected, the green light
flashes once to indicate unit is
charging.
3
Using the
iDM12
Using Bluetooth: Pairing Your Device
NOTE: See the iDM12 Bluetooth Connection Guide for complete
pairing details.
1. Move the Bluetooth/Aux Switch to the Bluetooth position (left).
2. Press and hold the Power Button to turn on the unit (release when
green light appears).
3. Turn on Bluetooth capability on your device and make it
discoverable (see your device’s instructions to add or setup a
Bluetooth device).
4. Press and hold the Play/Pause/Pairing Button on the iDM12 until
an amber light flashes on front of the unit and it beeps twice to
indicate pairing attempt. The amber light will flash while the unit
attempts to pair. If your device asks for a password, enter 1234 on
the keyboard of your device.If no device is paired within 3 minutes,
the unit will power off. If this occurs, retry steps 2-4.
5. Once paired with a device, the amber light will glow steadily, then
turn green. There should be an indication on your device that
pairing is complete. On some devices, you must then select “use as
a stereo audio device” or similiar on the device’s Bluetooth
menu.Once paired, your device should link to the iDM12 whenever
4
within range.
Using the
iDM12
Playing Audio Via Bluetooth
1. Move the Bluetooth/Aux Switch to the Bluetooth position to listen to
audio streamed wirelessly from your paired iPad, iPhone, iPod or other
Bluetooth device.
2. Press and hold the Power Button to turn on the unit. The amber light will
flash as the unit searches for a previously paired device, and then turn
green when a previously paired device is detected.
3. Press the Play/Pause/Pairing Button to play or pause audio from your
Bluetooth device. NOTE: Play/Pause only works in Bluetooth mode. It
does not control aux line-in devices.
4. Use the Volume +/- Buttons to adjust volume.
5. When done listening, press the Power Button to turn the unit off.
5
Using the
iDM12
Playing Audio via Aux
1. Move the Bluetooth/Aux switch to the Aux position to listen to audio
via aux in.
2.Connect the micro USB plug to the micro USB charging port on the
back of the unit and connect the 3.5 mm audio plug to the
headphone or line-out jack on your audio device.
3.Press and hold the Power Button to turn on the unit (release when
green light appears).
4.Use the Volume +/- Buttons to adjust volume. You may wish to adjust
the volume on your audio device, too.
5.When done listening, press the Power Button to turn the unit off.
Remember to turn off your audio device, too.
6
Internal Rechargeable Lithium-ion Battery
This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your
battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information.
WARNING/DISPOSAL OF UNIT
Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace your battery,
you should follow the disposal instructions below:
•
•
Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.
Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the
disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, please dispose of
the device in a waste bin for electronic devices.
Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see which ones in
your area do so.
•
CAUTION
The battery used in this device may present a risk of fire, explosion or chemical burn if mistreated
•
•
Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic
substance.
•
Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery. Leakage or
deterioration of the battery may occur if this warning is not heeded.
•
•
Never expose the battery to any liquid.
Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle
where excessive internal temperatures may be encountered.
•
Always keep the battery out of the reach of infants and small children.
7
Consumer Product Safety Guide
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your
personal safety. However, improper use can result in potential electrical shock or fire hazards. Please
read all safety and operating instructions carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its
proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that
may block ventilation openings. Also, it should not be placed in a built-in installation, such as a
bookcase or cabinet, which may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves
or other appliances (including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in
the operating instructions or as marked on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them. It is always best to have a clear
area from where the cable exits the unit to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not
spilled into any openings or vents located on the product.
8
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the
antenna or cable system during a lightning storm or when it is left unattended and unused for long
periods of time. This will prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles
as this can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C.the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month
or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those methods described in the
user’s operating instructions. Service methods not covered in the operating instructions should be
referred to qualified service personnel.
9
Troubleshooting
Unit doesn’t respond (no power)
Make sure unit is completely charged. Check that all connections are
correct and properly plugged in. Make sure your device is properly paired
with the iDM12.
Trouble pairing device/computer with iDM12
Bluetooth implementation varies depending on your computer’s hardware
and operating system. Please see our website for updates on pairing.
• Make sure you have the latest firmware for your iPad, iPhone or iPod
(update via iTunes if needed).
• Make sure your device is working properly. Check your device’s manual
for details on Bluetooth pairing and linking.
For further information and to see the latest instructions, visit
iDM12-030711- UK ENG - A
Printed in China
|