iHome MP3 Docking Station IP98 User Manual

Model iP98  
The Home System  
For Your iPhone® or iPod®  
 
Table of Contents  
Quick Start........................................................................................................................................................................1  
Controls and Indicators / iP98 Display..........................................................................................................................2  
Using the iP98 ...............................................................................................................................................................3-4  
Replacing iP98 Backup Batteries ...................................................................................................................................4  
Using the Remote Control Unit ......................................................................................................................................5  
A Consumer Guide to Product Safety ...........................................................................................................................6  
Troubleshooting............................................................................................................................................................7-8  
Solucionando problemas...........................................................................................................................................9-10  
Warranty Information..................................................................................................................................................... 11  
A Consumer Guide to Product Safety  
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this  
device does not cause harmful interference.  
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits  
provide reasonable protection against radio and TV interference in a residential area.  
However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate interference  
you can try one or more of the following corrective measures:  
Reorient or relocate the receiving antenna.  
Increase the distance between the equipment and the radio or TV.  
Use outlets on different electrical circuits for the equipment and the radio or TV.  
Consult your dealer or an experienced radio/television technician if the problem still exists.  
Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate the system’s  
warranty and void your FCC authorization to operate it.  
This Class B digital apparatus complies with Canadian ICES-003.  
Maintenance  
Place the unit on a level surface away from sources of direct sunlight or excessive heat.  
Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should  
be placed between it and the furniture.  
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene, thinner  
 
or similar materials can damage the surface of the unit.  
quick start  
3: inserts  
1: power  
2: antenna  
Select the dock insert for your  
iPhone or iPod® model from the  
table below and place insert in  
dock. Never dock an iPhone/  
iPod without an insert in place.  
Attach AC adaptor cable to  
DC jack on back of the iP98  
and plug the other end into a  
wall socket.  
Snap AM antenna into provided  
stand, then plug antenna cable  
into socket on back of iP98.  
Move antenna 12away.  
iPhone 3G iPod touch 2G  
insert 15 insert 16  
nano 4G  
insert 17  
NOTE: If you do not have an insert for  
your iPhone/iPod, please visit  
Use this insert  
free at 877-446-6301 to purchase one.  
nano 4G  
For this iPhone / iPod iPhone 3G iPod touch 2G  
4: time zone  
5:iPhone/  
6: radio  
iPod  
• Move the DST switch on back  
of unit to +1 or -1 (adds or  
subtracts an hour)  
• Press & hold the Time Zone  
button on back until the  
display flashes  
• Turn the Set Wheel to select  
your time zone  
Insert an iPhone or iPod into the  
dock with proper insert  
(iPhone/iPod must not be in a  
skin or case). The iPhone/iPod  
will charge while docked.  
Press the Button on the iP98  
to play your iPhone/iPod.  
Press the Radio button and  
press again to select AM/FM  
band. Turn the Set Wheel to  
tune in a station.See page 4 for  
programming presets.  
• Press the Time Zone  
button again.  
1
 
Controls and Indicators  
Dock  
Radio Button  
Preset Buttons 1-6  
Set Wheel  
Volume Wheel  
SPULꢀPU  
Play/Pause Button  
LX  
Alarm 2 Button  
Alarm 1 Button  
Alarm Reset / Power Button  
EQ Button  
Sleep Button  
Snooze/Dimmer Button  
Time Zone Button  
Clock Adjust Button  
Line-in Jack  
AC Adaptor Jack  
DST switch  
+*ꢁꢂ=ꢃꢂꢄꢄꢄT(  
JSVJRꢃHKQꢅ  
[PTLꢃaVUL  
+:;  
HTꢃHU[LUUH SPULꢀPU  
ꢀꢁꢃꢃꢃꢃꢃꢆꢁ  
FM Antenna  
AM Loop Antenna socket  
iP98 Display  
Sleep Indicator  
PM Indicator  
Alarm 1, Alarm 2 Indicators  
Wake-to Indicator  
Time Display  
Battery Low Indicator  
Radio / Alarm Time / iPod Display  
 
2
Using the iP98  
Connect iP98 to Power Source  
Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120 VAC wall socket. Adaptor must be plugged  
in to operate. The iP98 does not operate on batteries.  
Setting the Clock  
a) Press and hold the Time Zone Button until the display flashes.  
b) Turn the Set Wheel to select your time zone.  
c) Press the Time Zone Button again. The clock will display the current time in your time zone.  
d) To adjust the time for Daylight Saving Time, slide the DST switch to +1 to advance the time 1 hour.  
Slide to -1 to turn the clock back 1 hour.  
To Set Clock Manually  
a) Press and hold the Clock Adjust Button. The clock display will flash.  
b) Turn the Set Wheel until the current time is displayed (a PM indicator appears when time is set to PM; there is no AM indictor).  
c) Press the Clock Adjust Button to accept the time. The year display will flash.  
d) Turn the Set Wheel to adjust the year and press the Clock Adjust Button. The date display will flash.  
e) Turn the Set Wheel to adjust the date and press the Clock Adjust Button. Two beeps will indicate clock setting is complete. Use  
DST switch to adjust for Daylight Saving Time.  
Using the Alarms  
The iP98 has two independent alarms. Each can be set to wake you to iPod (iPhone), iPod (iPhone) playlist, radio or buzzer at  
separate times.  
Setting the Alarms  
a) Press and hold the  
or Button until the alarm time flashes.  
b) Turn the Set Wheel to set the alarm time.  
c) Press the or Button again and turn the Set Wheel to select having the alarm come on all week (7days), only weekdays (5  
days) or just weekends (2 days).  
d) Press the or Button again and then turn the Set Wheel to select a wake source: Buzzer, iPod/iPhone, Playlist* (PLYLST) or Radio  
(last selected station).  
*
PLYLST: To wake to an iPhone/iPod playlist, you must create a playlist in iTunes called ‘iHome’ and import it to your iPhone/iPod.  
When PLYLST is set as your wake to source, the iP98 will wake to random songs in your iHome playlist.  
Note: If wake to source is set to iPod (iPhone) or playlist and iPhone/iPod or playlist is not present, the iP98 defaults to buzzer alarm.  
Arming and Disarming Alarm (Turn Alarm Function ON and OFF)  
a) Press an or Button to preview current alarm time(s). Press again to arm or disarm alarm function. When armed, the related  
alarm icon appears in the display.  
Resetting the Alarm to Come on the Next Day  
a) When the alarm is sounding, press the Button to stop the alarm and reset it to come on the following day.  
Snooze  
a) Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again after the selected snooze  
time. Snooze can be pressed several times during the 2 hours alarm cycle.  
b) To adjust the snooze time, during normal mode press and hold the Snooze/Dimmer Button until the display flashes. Use the Set  
Wheel to adjust snooze time from 1 to 29 minutes.  
Sure Alarm  
The iP98 has a sure alarm feature so the buzzer alarm will still sound in the event of power failure, if backup batteries are installed.  
iPhone/iPod  
Playing and charging your iPhone or iPod  
a) Place proper insert for your iPhone/iPod (see insert table under Quick Start) in Dock, then gently dock iPhone/iPod. When docked,  
your iPod will charge until fully charged. Unit will not overcharge iPhone/iPod.  
b) Press the  
Button to play iPhone/iPod, and again to pause. If your iPhone or iPod touch is in video mode, you may see the  
“locked” slider on the iPhone/iPod display. If so, you will need to unlock your iPhone/iPod.  
c) Turn Volume Wheel to adjust iP98 volume up or down  
d) Press the EQ Button to select Treble, Bass, 3D sound effect or Balance. Turn the Set Wheel to adjust settings. EQ settings for  
iPod and radio mode are independent.  
e) Press Button to turn iP98 and iPhone/iPod off.  
Note: If you dock an iPhone/iPod with a drained battery, it may take up to 6 minutes of charging before the iPhone/iPod will respond.  
 
3
Using the iP98  
Radio  
Setting up Antennas  
a) Snap AM loop antenna into provided stand, then plug AM antenna cable into AM Loop Antenna socket on back of unit.  
Move antenna 12” away from unit for best reception.  
b) Extend FM Antenna (on back of unit) fully for best reception. Do not strip, alter or attach to other antennas.  
Tuning and Playing the Radio  
a) Press the Radio Button to select radio play mode. Press as needed to select FM or AM radio band.  
b) Turn the Set Wheel to tune radio to a desired station.  
c) To program the current station as a preset, press and hold Preset Button 1-2 until P1 flashes on display; press again for P2 and  
allow to time-out (beep confirmation). Repeat steps a,b,and c for other preset buttons to preset up to 12 stations (6 AM, 6 FM).  
To listen to a preset station at any time, simply press the desired preset button once or twice.  
d) Turn the Volume Wheel to adjust iP98 volume up or down.  
e) Press the EQ Button to select Treble, Bass, 3D sound effect or Balance. Turn the Set Wheel to adjust settings. EQ settings for  
iPod and radio mode are independent.  
f) Press Button to turn iP98 off.  
Using the Line-in Jacks  
a) Use an audio patch cord (available at www.ihomeaudio.com) to play nondocking iPods or other audio devices through the iP98  
Line-in Jack (connect one end in the device’s line out or headphones jack, the other in the iP98 line-in jack).  
b) To listen to your audio device, press the Radio Button until line-in is displayed, indicating line-in mode. Adjust the output volume  
on your line-in device.  
Using Sleep Mode  
Sleep mode lets you sleep to your iPhone/iPod or the radio, gradually lowering the volume until the unit shuts off at the selected  
time.  
a) Press the Sleep Button to select an amount of time before the iP98 shuts off: 120, 90, 60, 30 or 15 minutes.  
b) Turn the Volume Wheel to set the sleep volume (this volume setting is separate from your standard volume setting).  
Using the Dimmer  
a) Press the Snooze/Dimmer Button during normal operation to adjust brightness of LCD display. There are 8 levels of brightness  
including OFF.  
Replacing iP98 Backup Batteries  
Install/Replace Backup Battery  
The iP98 uses a backup battery system to provide continuous alarm operation and clock settings  
in the event of a power failure. If the Battery Low Icon located on the right of the display is flashing,  
it is time to replace the backup batteries. Please make sure the AC adaptor is connected, otherwise  
all settings may be lost during battery replacement.  
Open the battery compartment cover located on the bottom of the unit. Insert 2 “AA” batteries  
as indicated. We recommend the use of alkaline batteries for longer life.  
Batteries information:  
Do not mix old and new batteries.  
Do not mix alkaline, standard (carbon -zinc) or rechargeable (nickel-cadmium) batteries.  
 
4
Using The Remote Control Unit  
The Remote Control controls basic functions on the iP98 and certain iPhone®/iPod® functions when the iPhone®/iPod®  
is docked in the iP98. For best results, use the remote control within 12 feet of the unit.  
- Power /Alarm Reset Button: Turns iP98 ON or OFF or resets alarm when alarm is  
sounding  
- Fwd/Rev Button: Skip to previous or next track, or HOLD to scan current playing  
track; Also controls set wheel functions (changing settings, tuning radio, etc.)  
- Menu Button: Press to access iPhone/iPod Menu functions  
- Preset Button: Cycles through AM or FM radio presets  
- Radio Button: Selects Radio (AM and FM radio bands) and line-in functions  
SPULꢀPU  
- EQ Button: Set Treble, Bass, 3D sound effect and Balance settings for best sound  
- Snooze/Dimmer Button: Snooze mode when alarm sounds, otherwise dims display  
TLU\  
T\[L  
LX  
LU[LY  
- Random Button: Press for random play  
YHKPV  
SPULꢀPU  
- Repeat Button: Press for repeat play (press again to repeat all)  
ZSLLW  
WYLZL[Z  
- Sleep Button: Press to select an amount of time before the iP98 shuts off: 120, 90,  
60, 30 or 15 minutes  
ZUVVaL  
- Volume – Button: Lowers volume level  
- Volume + Button: Raises volume level  
- Enter Button: Press to select iPhone/iPod menu function  
- Up/Down Button: Press Up or Down to scroll iPhone/iPod menu  
- Play/Pause Button: Plays track. In play mode, press to pause  
- Mute Button: Toggles sound ON or OFF  
Install/Replace the Remote Control Batteries  
The remote control batteries are already installed at the factory. When the remote control  
stops operating or its range seems reduced, replace the batteries with new ones.  
Battery  
door  
1. The battery door is located on the back end of the unit.  
2. Press to release the battery door latch.  
3. Insert one “CR2032” 3-volt lithium batteries. Make sure the polarity (the + and – side of  
the battery) is correct.  
4. Replace the battery holder back in the remote control.  
NOTE: PLEASE DISCARD BATTERIES PROPERLY  
 
5
A Consumer Guide to Product Safety  
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However,  
improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions  
carefully before installation and use, and keep these instructions handy for future reference. Take special note of all  
warnings listed in these instructions and on the unit.  
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,  
laundry tub, swimming pool or in a wet basement.  
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation.  
For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also,  
it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air  
through the ventilation openings.  
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances  
(including amplifiers) that produce heat.  
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating  
instructions or as marked on the appliance.  
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the  
unit to where it is plugged into an AC socket.  
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for  
cleaning instructions.  
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any  
openings or vents located on the product.  
8. Attachments – Do not use attachments not recommended by the product manufacturer.  
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable  
system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent  
damage to the product due to lightning and power-line surges.  
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result  
in a risk of fire or electric shock.  
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:  
A. the power supply cable or plug has been damaged.  
B. objects have fallen into or liquid has been spilled into the enclosure.  
C. the unit has been exposed to rain.  
D. the unit has been dropped or the enclosure damaged.  
E.  
the unit exhibits a marked change in performance or does not operate normally.  
12. Antenna – Do not connect an external antenna to the unit (other than that provided).  
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the  
power cable should be unplugged from the unit to prevent damage or corrosion.  
14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating  
instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.  
 
6
Troubleshooting  
Possible Problem  
Solution  
Symptom  
iP98 does not turn on  
AC adaptor isn't plugged into a working wall  
socket or not plugged into the power supply  
jack on back of the unit  
Plug the AC adaptor into a working wall socket and plug the connector  
into the supply jack on the unit  
iP98 doesn’t respond  
iP98 requires a reset  
If unit is plugged in and doesn't respond, try resetting the unit by  
following these steps:  
a) remove iPhone/iPod from dock  
b) unplug unit from power source  
c) remove back up batteries  
d) wait 1 hour, then resume use  
Remove your iPhone/iPod from the dock and check for obstruction on  
the connectors in the dock and on your iPhone/iPod. Then reseat it in  
the dock.  
iPhone/iPod is not docked properly  
Battery Low icon  
always flashing  
Batteries are weak  
Replace with new batteries  
Batteries were not installed properly  
Check to make sure the polarity ( + and – ends) matches the diagram  
in the battery compartment  
iPhone/iPod does not iPhone/iPod is not docked properly  
respond to the unit/iPod  
Remove your iPhone/iPod from the dock and check for obstruction on  
the connectors in the dock and on your iPhone/iPod. Then reseat it in  
the dock.  
is playing but no sound  
comes out  
Your iPhone/iPod software is too old  
Upgrade software on your iPhone/iPod. For details visit  
iPhone/iPod is locked up/plays but no sound  
comes out  
Check the volume setting. Make sure your iPhone/iPod is working  
properly before docking into the unit. Please refer to your  
iPhone/iPod manual for details. See above for software upgrade  
information.  
You may need to reset your iPhone/iPod. Refer to your iPhone  
or iPod user guide for details on how to perform a reset.  
Using 1st or 2nd generation iPod, iPod Shuffle or iP98 cannot control those iPod models or other devices.  
other devices.  
Remote Control didn’t  
work  
Battery weak  
Replace current battery with new battery  
Move within 30 feet of the unit.  
Remote Control is out of range of the iP98  
remote sensor  
iP98/iPhone/iPod  
performance is erratic  
The iP98 is reacting to external interference  
Move unit away from potential sources of external interference such as  
computers, modems, wireless devices (routers) or fluorescent light.  
No sound from iP98  
Volume is set too low on iP98  
Make sure volume is turned up  
iPhone/iPod didn’t  
charge up  
iPhone/iPod is not installed properly  
Remove your iPhone/iPod from the dock and check for obstruction on  
the connectors in the dock and on your iPhone/iPod. Then reseat it in  
the dock.  
iPhone/iPod is locked up/ frozen  
iPhone/iPod battery has problem  
Please make sure your iPhone/iPod is working properly before docking  
into the unit. Please refer to your iPhone/iPod manual for details.  
No AM band radio AM loop antenna is not connected to the unit  
sound but others OK  
Plug the AM loop antenna connector to the jack on the back of the unit  
AM band radio is very  
noisy  
AM loop antenna isn’t located properly  
Move the AM loop antenna away from the main unit AC adaptor and  
rotate it for best reception  
 
7
Troubleshooting  
Possible Problem  
Solution  
Symptom  
Sound is distorted  
Volume level is set too high  
Decrease the volume  
Sound source is distorted  
If the iPhone/iPod original sound source (MP3) is old or of poor quality,  
distortion and noise are easily noticed with high-power speakers. Try a  
different audio source such as a music CD.  
If you are using an external sound source like older generation of iPod  
or iPod Shuffle, try reducing the output volume on the device itself. Also  
try turning bass boost OFF.  
EQ settings are too high. For example, if the  
treble is too high, the 3D effect may not sound  
as good  
Lower EQ settings.  
Unit/adaptor gets  
warm after extended  
play at high volume  
This is normal  
Turn unit off for awhile or lower volume  
Snooze time  
is too long/short  
Custom snooze time not set  
Playlist is misnamed or empty  
Press and hold Snooze button then turn set wheel to adjust  
Can’t wake to playlist  
Alarm not working  
Sync iPhone/iPod to iTunes and manually label playlist iHome. Make  
sure to add songs to your playlist. For help in creating a playlist, please  
AM/PM time/alarm time not set correctly  
When setting clock or alarm time, take note of the PM indicator; there is  
NO AM indicator  
Alarm time or source selected for alarm 2 , not  
alarm 1 or vice versa  
Make sure to set the alarm time and source for the alarm icon 1 or 2  
that is shown on the clock display  
7-5-2 days setting is not correct  
7 days is every day alarm, 5 days is Mon-Fri, and 2 days is Sat-Sun. See  
page 3 for setting alarms.  
Calendar is not set correctly, which can affect  
7/5/2 day alarm operation  
See page 3 for setting Clock/Calendar Section.  
Brief occasional radio  
noise  
This is normal when the iPhone periodically  
communicates with cell towers  
AM/FM radio is subject to interference from the iPhone antenna. If you  
find the noise disturbing, you may wish to move the iPhone away from  
the iP98.  
8
 
Solucionando problemas  
Síntoma  
Causa  
Solución  
La unidad no  
enciende  
El adaptador de corriente AC no está conectado a Conecte el adaptador de corriente a un tomacorriente que funcione  
un tomacorriente que funcione o no está conectado y a la parte posterior de la unidad  
en la parte posterior de la unidad  
La unidad no  
responde  
La unidad debe ser reprogramada  
Si la unidad está conectada y no responde, pruebe reprogramarla  
siguiendo estos pasos:  
a) Quite el iPod de la base  
b) Desconecte la unidad del tomacorriente  
c) Quite las baterías auxiliares  
d) Espere 1 hora y vuelva a probar  
No ha colocado el encastre del iPhone/iPod, o está Verifique que el encastre sea el apropiado para su iPhone/iPod  
utilizando el encastre incorrecto.  
El iPhone/iPod no  
encastra  
correctamente  
El iPhone/iPod no encastra correctamente  
Quite el iPhone/iPod del encastre y retire la posible obstrucción  
del encastre o de su iPod. Vuelva a colocar el iPod dentro del  
encastre.  
El ícono de batería Las baterías están gastadas  
Reemplace las baterías  
baja está  
Verifique que la polaridad de las baterías (- y +) se encuentren de  
acuerdo al diagrama del compartimiento de baterías.  
Las baterías no están instaladas  
destellando  
correctamente  
El iPhone/iPod no  
se comunica con  
la unidad/el iPod  
está operando  
pero no emite  
sonido  
El iPhone/ iPod no ha sido instalado correctamente. Quite el iPhone/iPod del encastre y verifique posibles obstrucciones  
del encastre o de su iPhone/iPod. Vuelva a colocar el iPhone/iPod  
dentro del encastre.  
El software (programa) de su iPhone/iPod es  
obsoleto.  
Renueve el programa de su iPhone/iPod. Para mayor información, diríjase  
El iPhone/iPod está trabado/opera pero no emite  
sonido.  
Verifique los controles de volumen. Fíjese si su iPhone/iPod  
funcionaba bien antes de encastrarlo en la unidad. Refiérase al  
manual de operación del iPhone/iPod para más detalles. Ingrese  
al portal de Apple para obtener un programa actualizado.  
Podría tener que re-programar su iPhone/iPod.  
Para realizarlo, refiérase al manual del usuario correspondiente.  
Usted tiene un iPod de 1ra o 2da generación, un  
iPod Shuffle u otro tipo de aparato.  
El iP98 no puede controlar estos modelos de iPod u otros  
aparatos.  
El control remoto  
no funciona  
Las baterías están gastadas  
Reemplace las baterías por nuevas  
No está apuntando el control remoto hacia el  
iP98  
Apunte el control remoto hacia el iP98 y manténgase a una  
distancia máxima de 10 pies de la unidad.  
El funcionamiento El iP98 está reaccionando a interferencias  
del iP98/iPhone/iPod externas.  
es errático.  
Aleje la unidad de Fuentes potenciales de interferencia externa  
como computadoras, modems, ruteadores inalámbricos, luz  
fluorescente, etc.  
No sale sonido  
de su iP98  
El volumen del iP98 se encuentra muy bajo  
El iPhone/iPod no está instalado correctamente  
Asegúrese de subir el volumen  
El iPhone/iPod no  
carga  
Quite el iPhone/iPod del encastre y retire la posible obstrucción  
del encastre o de su iPhone/iPod. Vuelva a colocar el iPhone/iPod  
dentro del encastre.  
El iPhone/iPod está trabado/no responde  
Por favor asegúrese de que su iPhone/iPod funcione correctamente  
antes de colocarlo en el encastre. Refiérase al manual de su  
iPhone/iPod para mayor información.  
La batería del iPhone/iPod podría tener algún  
inconveniente  
9
 
Solucionando problemas  
Síntoma  
Causa  
Solución  
La banda de AM se La antena circular no está ubicada correctamente. Aleje la antena de la unidad y del adaptador AC y gírela hasta  
escucha con distorsión  
mejorar la recepción.  
El sonido sale  
distorsionado  
El volumen se encuentra muy alto  
Baje el volumen  
El sonido sale distorsionado de la unidad  
Si el sonido original de su iPhone/iPod era de pobre calidad, las  
distorsiones y ruidos se harán más notables con los  
parlantes de alta potencia. Pruebe utilizar otra fuente de  
audio como un CD.  
Si está utilizando un iPod de primeras generaciones o un Shuffle,  
intente bajar el volumen de su aparato. También intente apagar el  
amplificador de bajos  
La programación de EQ está demasiado alta.  
Por ejemplo, si los agudos están en volumen muy  
alto, el efecto 3D podría no sonar bien.  
Baje los niveles del EQ.  
La unidad recalienta  
luego de largos  
períodos de uso a  
alto volumen  
Esto es normal  
Apague la unidad o baje el volumen  
El tiempo de  
apagado con  
“Snooze”  
(Dormilón), es muy  
largo/corto.  
La duración del programa “Snooze” no ha sido  
programada.  
Mantenga oprimido el botón “Snooze” luego gire la rueda para  
programar la duración de tiempo deseada.  
La unidad no  
reproduce la lista  
de canciones al  
despertar.  
Sincronice su iPhone/iPod a iTunes y manualmente ingrese el  
nombre de la lista bajo “iHome”. Asegúrese de agregar las  
canciones a su lista.  
La lista está vacía o se encuentra mal denominada.  
La alarma no  
funciona  
El indicador de AM/PM no ha sido programado Ajuste la alarma según deseé que suene en hora AM o después  
correctamente.  
del mediodía PM.  
El ícono indicador en el visor es incorrecto.  
Verifique que el horario de la la alarma y el del ícono correspondiente  
1 o 2 en el visor del reloj se encuentren sincronizados.  
La programación 7-5-2 no es correcta.  
Utilice 7 para uso de alarma diario por 7 días, 5 para Lunes a  
Viernes y 2 para Sábado y Domingo. Diríjase a la página 3 para  
su programación.  
El calendario no se encuentra programado Refiérase a la página 3 para ver la sección de programación del  
correctamente para 5/2 días. Reloj/ calendario.  
 
10  
Limited 1 Year Warranty Information  
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from  
defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase.  
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.  
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period,  
SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $10.00 charge for handling, packing,  
return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product  
to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee for service  
without proof of purchase is $35.00.  
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective  
batteries are the most common cause of problems encountered.  
If service is still required:  
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.  
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty  
period.  
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $10.00 ($35.00 without proof of purchase).  
4. Send the unit prepaid and insured, to the Factory Service Center listed below.  
Consumer Repair Department  
SDI Technologies Inc.  
1330 Goodyear Dr.  
El Paso, TX 79936-6420  
Disclaimer of Warranty  
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which  
have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized  
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes  
(if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.  
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original  
purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members  
or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive  
damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions  
may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually  
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies  
product.  
Toll Free Customer Service: 1-877-446-6301  
 
iP98IB-032709-A  
©SDI Technologies 2009 All rights Reserved  
Printed in China  

HANNspree Flat Panel Television DT12 10A1 User Manual
Hasselblad Camera Lens HC 28 80 User Manual
Honeywell Cell Phone 60s QS User Manual
HP Hewlett Packard DVD Player hd100 User Manual
HP Hewlett Packard Power Supply R5500 User Manual
HP Hewlett Packard Server 699796 006 User Manual
Huawei Network Router V200R001 User Manual
Hunter Fan Outdoor Ceiling Fan 21562 User Manual
Husqvarna Trimmer 326EX Series User Manual
IKEA Indoor Furnishings AA 118755 1 User Manual