iHome Clock Radio IP18 User Manual

Model: iP18 (For US & Canada)  
Instruction Manual (English)  
Print color : Black text on white paper  
Size of manual: 178mmW x 178mmH  
Date: Dec 16, 2011  
Page 1  
Model: iP18  
Color Changing  
Dual Alarm Clock Speaker  
for Your iPhone / iPod  
m
e
r
works with  
iHome Sleep  
alarm clock app  
download QR code  
reader app and scan  
iHome Radio  
internet radio app  
 
FCC Information  
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could  
void the users authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Battery Information  
For models that use Lithium batteries  
• Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures.  
& not handled appropriately  
• Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery  
types, or store with hazardous or combustible materials.  
• Store in cool, dry, ventilated area.  
• Follow applicable laws and regulations for transport and disposal.  
 
Controls and Indicators  
Top panel  
iPhone/iPod Dock  
Dock iPhone/iPod  
Time Sync/Set Button  
Press to sync clock to time  
Alarm 1 Button  
Set and arm/disarm Alarm 1  
on docked iPhone/iPod.  
Press and hold for manual time setting  
Alarm 2 Button  
Power/Alarm Reset Button  
Press to turn unit ON or OFF,  
reset alarm when sounding  
Set and arm/disarm Alarm 2  
Color Button  
Sleep Button  
Press for sleep timer  
Press to cycle color settings  
Raise Volume Button  
Raise volume  
<< Reverse/Minus  
Settings Button  
Press to lower selected setting  
Lower Volume Button  
Lower volume  
>> Forward/ Plus  
Settings Button  
Play/Pause iPod/iPhone  
Press to raise selected setting  
Press to play or pause iPod/iPhone  
Snooze/Dimmer Button  
Press to silence alarm for selected time  
Press to adjust brightness during standard operation  
(not during alarm mode)  
Back panel  
Backup Battery Compartment  
Adapter Jack  
Plug in AC adaptor cable and  
connect to outlet  
Access backup battery  
1
 
iP18 Quick Start  
1: power  
2: inserts  
3: auto sync  
RESET  
R E S T  
TEST  
T E S
mer  
Insert your iPhone/iPod on to the dock. After a  
moment the unit will attempt to Auto Sync  
the clock on the unit to the time on your  
iPhone or iPod. “SYNC AUTO” will appear on  
the display, followed by “SYNCED” and 2  
beeps. If “FAIL” appears and a long beep  
sounds, try again with a different iPhone/iPod  
or set time manually (see page 4).  
Attach AC adaptor cable to  
adaptor jack on back of the iP18  
and plug the other end into a  
wall socket to play and charge  
iPhone/iPod. Remove the tab  
from the battery backup  
compartment.  
Select the dock insert for your  
iPhone/iPod model from the table  
below and place insert in dock.  
To remove insert, place  
thumbnail in slot and gently pull  
upwards.  
Note: An insert provides the best stability and  
safety for your iPhone/iPod, but you can safely  
dock your iPhone or iPod without an insert,  
provided you always do so with care. If you prefer  
to use an insert and don’t have one for your model,  
free at 800-288-2792 to purchase one.  
Use this insert  
iPod touch 2G  
insert 16  
iPhone 4  
insert 19  
nano 6G/touch 4G  
insert 20  
For this  
iPhone / iPod  
nano 6G/  
iPod touch 4G  
iPhone 4  
iPod touch 2G/3G  
4: iPhone/iPod  
5: color change  
Dock a playing iPhone or iPod to turn on the unit. After  
a moment you will hear your music. Press the  
Button to play a docked iPhone or iPod. Press the  
Button again to pause play. Your iPhone or iPod  
will charge while docked.  
Press and release the Color Button as needed to  
cycle through color mode settings. In Fast color  
change mode, press and release the Color Button  
when a specific color is showing to select that color.  
2
 
Display  
Alarm 1 and 2 indicators  
Low Backup Battery indicator  
Time Display  
Alarm is armed and will sound at set time  
PM indicator  
AM indicator  
Sleep indicator  
Alarm indicator  
Mode indicator &  
Bedtime Sleep Timer indicator  
Wake to LED effect indicator  
Installing/Replacing the Clock Backup Battery  
Note: The CR2450 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit.  
This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a  
temporary power interruption. The battery backup circuit will also operate the buzzer alarm to wake you up at the selected  
wake up time even if the power is out. The battery backup circuit requires one CR2450 lithium battery, included.  
When the backup battery is getting weak the Low Backup Battery Indicator will begin flashing in the display. When you see  
this flashing indicator you should replace the backup battery as soon as possible. Purchase a replacement CR2450 battery,  
available wherever batteries are sold, and follow steps 1 through 4 below to install the replacement battery.  
To replace the backup battery:  
IMPORTANT: When replacing the backup battery be sure to have the unit connected to  
the AC outlet to maintain all of your settings, otherwise it will be necessary to reset the  
time and alarm time after the battery is replaced.  
1. Place unit face down. Locate the battery backup compartment found on the back of  
the unit.  
2. Use a Phillips screwdriver to open the battery compartment cover. Remove the cover  
and remove the exhausted CR2450 battery.  
3. Insert a fresh CR2450 battery in the backup battery compartment with the “+” side  
facing up, as illustrated.  
4. Replace the battery compartment cover and screw the compartment door back in  
place. Do not overtighten. Confirm that the backup battery indicator is not flashing in  
the display.  
Installing Backup Battery  
Note: Make sure you dispose of battery properly (see your local regulations).  
3
 
Setting the Time Using Time Sync  
The Time Sync feature allows you to sync the time setting on the unit to the time from your iPhone or recent model iPod (iPod touch,  
iPod nano and iPod Classic; older iPod models such as iPod mini do not support this feature). By default, the unit will attempt to  
Auto Sync whenever an iPhone or iPod is docked. You can turn off auto sync if you prefer to manually sync the time at any time  
using the steps below.  
1. Press and hold the Time Sync/Set Button on top of the unit until “SET Auto” flashes. Press the << or >> Button to select  
“Set manual”. Auto Sync is disabled, and syncing must now be done manually. (To reset for Auto Sync, select “SET Auto”).  
2. Gently dock your iPhone or iPod.  
3. Press and release the Time Sync/Set Button. “SYNC” flashes in the display, indicating sync attempt. If sync is successful, the  
time will update and you will hear two beeps and the display will show “SYNCED”.  
4. If sync does not work, a long beep will sound and “FAIL” will appear on the display. If this happens, try using a different  
iPhone/iPod to attempt syncing again or set time manually (see below).  
NOTE: The iPhone is constantly updated to current time via cell phone towers. The time on your iPod is only accurate to the last  
time it was synced to a computer. Its possible to have up to 59 seconds difference between the unit and synced iPhone/iPod.  
Setting the Time Manually  
1. Press and hold the Time Sync/Set Button until “SET Auto” flashes. Press the << or >> Button to select “Set manual”.  
2. Press and release the Time Sync/Set Button. The time will flash. Press the << or >> Button to set the correct hour (press  
and hold for rapid setting). Remember to set the correct AM or PM time. The AM and PM Indicators are located to the left of  
the time digits.  
3. Press either the  
or  
Button at any time during clock setting to toggle the display between 24 hour (military) and 12 hour  
(standard) display mode. The PM indicator will not appear when display is in 24 hour mode.  
4. Press the Time Sync/Set Button again. The year will flash. Press the << or >> Button to set the correct year.  
5. Press the Time Sync/Set Button again. The date will flash. Press the << or >> Button to set the correct date (press and  
hold for rapid setting).  
6. Press the Time Sync/Set Button again (or no button press within 10 seconds) to exit the clock setting mode. 2 beeps will  
confirm clock setting is complete.  
Setting the Alarms  
This unit has a dual alarm system so you can set two separate alarms to different alarm times.  
Setting the Alarms  
Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button (  
or  
) for whichever alarm  
you are setting.  
1. Press and hold the  
or  
Button until the alarm time flashes on the lower part of the display. Press and release the <<  
or >> Button to set the alarm time (press and hold for faster setting). Remember to set the correct AM or PM time.  
2. Press and release the Alarm Button again to confirm the set alarm time. If the unit does not detect an iPhone or iPod at  
the set alarm time, the unit will default to buzzer alarm. The alarm cycle lasts for one hour; make sure you have enough  
music on your iPhone or iPod to last that long.  
3. Press and release the Alarm Button again, then press and release the << or >> Button to set the color LED wake cycle:  
Dawn (amber fade leading up to alarm time), Flash (flashing red while alarm sounds), Glow (glowing color sequence while  
alarm sounds) or None (no wakeup LED effect).  
4. Press and release the Alarm Button again (or no button within 10 seconds) to exit the alarm setting mode. The alarm will  
be armed once set and the corresponding alarm icon will light up. The lower part of the display will show the earliest set  
alarm time.  
4
 
Operating the Alarm  
At the set time, the alarm will sound for 1 hour. If waking to iPhone or iPod, make sure your playlist has an hour of music in it.  
1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and release the  
The alarm sound will stop but the alarm icon will remain in the display, indicating the alarm is armed. To turn off  
the alarm without resetting it for the next day, press and release the Alarm Button.  
Button.  
2. Press and release the Alarm Button during normal operation (alarm is not sounding) to view the currently set alarm time.  
Press and release again as needed to arm the alarm (alarm icon is present) or to cancel it (no alarm icon).  
3. Press and release the Snooze Button while alarm is sounding to temporarily silence the alarm for the set snooze time  
(default is 9 minutes). To adjust the snooze time: Press and hold the Snooze Button during normal operation. The  
snooze time will flash on the display. Press the << or >> Button to adjust the snooze time from 1 - 29 minutes. Press  
and release the Snooze Button again (or no button within 10 seconds). Two beeps will sound to confirm snooze setting  
and return unit to normal operation.  
Playing and Charging your iPhone/iPod  
1. Gently dock playing iPhone or iPod. The unit will turn on and in a moment you will hear your music. When docked, the  
iPhone or iPod will charge until fully charged.  
Note: If the volume is too low on the iPhone/iPod, the unit may not detect that the iPhone/iPod is in play mode. Press  
and release the  
Button to play it.  
2. Press the << or >> Button to go to the next or previous track; press and hold to scan forwards or backwards within a  
currently playing track.  
3. When the iPhone/iPod is docked and in standby mode, press the  
Button to play it.  
4. When the iPhone or iPod is in play mode, press the Button to pause play; press again to resume play.  
5. Press the or  
Button to adjust the unit volume.  
6. To turn off the unit, press and release the  
Button. Your iPhone/iPod will continue charging while in the dock.  
5
 
Color Change Mode  
Color Change Mode can be accessed whether the unt is ON or OFF. There are 3 color settings. Press the Color Button  
to cycle through them. The settings are:  
• GLOW  
Slow color change (default): Colors slowly fade in and out continually from one color to the next.  
• FAST  
Fast color change: colors change quickly from one to another through the color spectrum.  
• 1 COLOR Select the last color. NOTE: To manually cycle to a desired color, press and release the  
<< or >> Button as needed while the unit is OFF. This function is not available while the unit is ON.  
• OFF  
Turns off cabinet color effect.  
Dimmer Mode  
When unit is in normal mode (no alarm is sounding), press the Snooze/Dimmer Button to cycle through High, Medium, Low,  
and Off brightness settings. Settings affect both the display and cabinet LED. Dimmer function will not work during GLOW  
color change mode. When LED color mode is set to OFF, pressing the Snooze/Dimmer Button will place unit in 1 COLOR  
mode with white backlight. Press the Color Button again to return color mode to OFF.  
Bedtime Sleep Mode  
This unit has a Bedtime Sleep feature which gradually lowers the volume of playing audio over a set time then turns the unit  
off. It will also turn off a docked iPhone or iPod.  
1. Press and release the Sleep Button as needed to cycle to the desired sleep setting: 120, 90, 60, 30, 15 minutes or Off  
(cancels sleep mode).  
2. To set sleep volume, press the  
or  
Buttons. Sleep volume does not effect normal or alarm volume settings.  
3. During sleep mode, press the Sleep Button to view the sleep time remaining. Press again to set sleep to the next lowest  
setting.  
4. To cancel sleep mode and turn the unit off, press and release the  
Button.  
6
 
A Consumer Guide to Product Safety  
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However,  
improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully  
before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in  
these instructions and on the unit.  
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,  
laundry tub, swimming pool or in a wet basement.  
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For  
example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it  
should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through  
the ventilation openings.  
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances  
(including amplifiers) that produce heat.  
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions  
or as marked on the appliance.  
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched  
by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where  
it is plugged into an AC socket.  
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning  
instructions.  
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings  
or vents located on the product.  
8. Attachments – Do not use attachments not recommended by the product manufacturer.  
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable  
system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage  
to the product due to lightning and power-line surges.  
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in  
a risk of fire or electric shock.  
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:  
A. the power supply cable or plug has been damaged.  
B. objects have fallen into or liquid has been spilled into the enclosure.  
C. the unit has been exposed to rain.  
D. the unit has been dropped or the enclosure damaged.  
E. the unit exhibits a marked change in performance or does not operate normally.  
12. Antenna – Do not connect an external antenna to the unit (other than that provided).  
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power  
cable should be unplugged from the unit to prevent damage or corrosion.  
14. Servicing – The user should not attempt to service the unit beyond those methods described in the users operating  
instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.  
7
 
Trouble Shooting  
Symptom  
Possible Problem  
Solution  
Unit doesn’t respond AC adaptor isn’t plugged to a wall outlet or  
Make sure the AC adaptor is properly connected to a working  
wall outlet and to the power supply jack on the unit  
(no power)  
the connector is not plugged into the power  
supply jack on the back of the unit  
Wall outlet is not functioning  
Plug another device into the same outlet to confirm the outlet is working  
iPhone/iPod cannot  
dock properly  
Remove your iPhone/iPod from the connector and check for  
any obstruction on the connectors in the dock. Try removing  
case or skin from your iPhone/iPod. Then reseat it in the dock.  
Possible obstruction in dock area or on  
iPhone/iPod (skin or case is in the way)  
Playing iPhone/iPod  
but there is no  
sound  
Remove your iPhone/iPod from the connector and check for  
any obstruction on the connectors in the dock and on your  
iPhone/iPod. Then reseat it in the dock.  
iPhone/iPod is not docked properly  
Press play button on your iPhone/Pod to play it manually.  
Your iPhone/iPod is not playing  
iPhone/iPod is locked up  
Please make sure your iPhone/iPod is working properly before  
docking it to the unit. Please refer to your manual for details.  
Using 1st or 2nd generation iPod, iPod Shuffle or  
other device  
Please connect them with Line-in.  
iPhone/iPod didn’t  
charge up  
Remove your iPhone/iPod from the connector and check for  
any obstruction on the connectors in the dock and on your  
iPhone/iPod. Then reseat it in the dock.  
iPhone/iPod is not docked properly  
iPhone/iPod is locked up/frozen  
iPhone/iPod battery has problem  
Volume level is set too high  
Sound source is distorted  
Please make sure your iPhone/iPod is working properly before  
docking it to the unit. Please refer to your manual for details.  
Sound is distorted  
Decrease the unit volume  
If original sound source file is poor quality, distortion and noise  
are easily noticed with high-power speakers.  
Try a file from a trusted audio source such as iTunes  
If you are using an iPod Shuffle or external sound source like  
older generation iPod, try reducing the output volume on the  
device itself. Also, try turning bass boost OFF under iPod  
settings.  
LED color lighting  
effect is missing/  
not working  
Press Color Button to cycle to other color LED modes  
LED color mode is set to OFF  
Dimmer is set to OFF  
Press Snooze/Dimmer Button to cycle to other brightness modes  
Unit is running on backup battery  
Make sure the AC adaptor is properly connected to a working  
wall outlet and to the power supply jack on the unit  
8
 
Limited 1 Year Warranty Information  
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects  
in workmanship and materials, under normal use and conditions, for a period of 1 year from the date of original purchase.  
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this  
fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI Technologies will  
repair or, at its discretion, replace this product without charge (except for a $20.00 charge for handling, packing, return UPS/postage, and  
insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed  
below. The product must include proof of purchase, including date of purchase. The fee for service without proof of purchase is $40.00.  
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are  
the most common cause of problems encountered.  
If service is still required:  
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.  
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.  
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $20.00 ($40.00 without proof of purchase).  
4. Send the unit prepaid and insured, to the Factory Service Center listed below.  
Consumer Repair Department  
SDI Technologies Inc.  
1330 Goodyear Drive  
El Paso, TX 79936-6420  
Disclaimer of Warranty  
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have  
been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii)  
cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv)  
the cost of shipping this product to the Factory Service Center and its return to the owner.  
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser.  
In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable  
to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do  
not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty  
gives you specific legal rights, and you may also have other rights which vary from state to state.  
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding  
to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies product.  
© 2011 SDI Technologies, Inc. All rights reserved  
or call 1-800-288-2792 Toll Free  
iP18-120811-English  
Printed in China  
 

Graco Heat Pump 239 327 User Manual
Grizzly Car Seat H6166 User Manual
Hamilton Beach Mixer CPM500 User Manual
Harbor Freight Tools Paint Sprayer 91009 User Manual
Havis Shields Automobile Accessories WGI F14 User Manual
Honeywell Bluetooth Headset AP 010 BT User Manual
Honeywell Cooktop Central Heating Cooker Natural Gas User Manual
HP Hewlett Packard Portable Media Storage WDBW2A0020HBK NESN User Manual
HP Hewlett Packard Switch 8407A User Manual
Humminbird Fish Finder Ultima User Manual