i Tech Dynamic Headphones Bluetooth Stereo Headphone User Manual

Contents  
Product Specifications  
3
BlueBAND Sport Overview  
4
Getting Started  
4
Charging Your Headphones  
5
Pairing Your Headphones with a Bluetooth Mobile Phone  
Turning Your Headphones On and Off  
Using Your Headphones  
Resetting Your Headphones / Removing the Pairing History  
Troubleshooting  
Safety Information  
Care and Maintenance  
Declaration of Conformity  
Federal Communications Commission (FCC) Statement  
6
7
8-9  
10  
11  
12  
13-14  
15  
16  
BlueBAND Sport  
Bluetooth Stereo Headphones  
2
Product Specifications  
BlueBAND Sport Overview  
1. Volume + / SRS Key  
2. Status Indicator  
3. Multi-function Button (MFB) / Play / Pause  
1
2
Bluetooth Specification:  
Bluetooth Profiles Supported:  
Range of Frequency:  
Operating Distance:  
Charging Time:  
v2.0+EDR Class 2  
Headset, Handsfree, A2DP & AVRCP  
2.4GHz Spectrum  
10 meters  
Within 3 hours  
Up to 8 hours  
4
6
3
4. Rewind  
I
5. Fast Forward  
6. Volume  
I
Talk Time*:  
7. Microphone  
8. USB Charging Socket (open the cover)  
Music Playing Time*:  
Standby Time*:  
Dimensions:  
Up to 8 hours  
Up to 200 hours  
90 (L) x 80 (W) x 118 (H) mm  
72.6 grams  
8
5
Weight:  
7
* may vary due to users’ operation mode and mobile phone settings  
Getting Started  
Before using your BlueBAND Sport (“headphones”) for the first time, please ensure that  
1. the headphones are fully charged;  
2. the fully charged headphones must be paired and connected with a Bluetooth mobile  
Download from Www.Somanuals.com. All Mpahnounae.ls Search And Download.  
3
Using Your Headset (cont’d)  
Resetting Your Headphones / Removing the Pairing History  
You may reset the headphones to its default settings. Resetting will also remove the pairing  
settings of your headphones with the mobile phone.  
Music Playing Functions (A2DP and AVRCP Applicable Only)  
Function  
Button  
Audio  
Status Indicator  
1. Connect the supplied charger to your headset and then to AC power. The status indicator will  
stay red.  
Disable SRS  
(the default is SRS ON)  
When playing music, press and hold a short beep Flashing blue light  
the Volume + for 2 seconds  
once  
2. Press and hold the Volume + for 10 seconds until the status indicator flashes purple.  
3. Release the Volume + .  
4. Press and hold the Volume + again until the status indicator flashes purple and then release  
the Volume + .  
Enable SRS  
same as "above"  
2 short beeps Flashing blue light  
twice  
Answer a call when playing Press the MFB once  
music  
Flashing purple light  
when there is a call  
5. The status indicator will stay red again and the headphones are reset.  
End a call and resume music Press the MFB once  
Flashing blue light*  
Flashing blue light*  
Flashing blue light*  
Flashing blue light*  
Flashing blue light*  
Flashing blue light*  
Flashing blue light*  
Flashing blue light*  
i.Tech Bluetooth headset is designed to work with Bluetooth devices. Due to large  
variability between different Bluetooth devices from different manufacturers,  
interoperability between the headset and all Bluetooth-enabled products is not  
guaranteed.  
Play  
Press‟II once  
Press‟II once  
Press and hold  
Press ‟ I once  
Press and hold I  
Press I‟ once  
Pause  
Fast Forward  
Next Track  
Rewind  
I
Replay  
Adjust Volume  
Press the Volume + / Volume  
once to increase / decrease by 1  
level (Total 8 levels)  
9
10  
*If SRS is enabled, the status indicator will flash blue light twice every time.  
Safety Information  
Troubleshooting  
I can't hear anything in my headphones.  
• Check and observe local laws regarding the use of a mobile phone and headphones while  
driving. If you use the headphones while driving, ensure your full attention and focus. It  
is your responsibility to drive safely. Consider to pull off the road before making or  
answering a call.  
• Never leave your headphones above any air bag deployment area inside your car as  
serious injury may result when an air bag deploys.  
• Never allow children to play with the headphones – small parts may be of choking hazard.  
• Observe all signs and displays that require an electrical device or RF radio product to be  
switched off in designated areas. These could include hospitals, blasting areas, and  
potentially explosive atmospheres.  
• Turn off your headphones prior to boarding an aircraft. Do not use your headphones  
inside an aircraft.  
• To prevent damage to your hearing, please do not set the listening volume too high.  
• Do not attempt to modify the headphones.  
• Never use the headphones while taking a bath.  
• Do not use the headphones in a sauna or steam room.  
• Do not keep the headphones near a wash basin or other wet places.  
• Do not use the headphones outdoors in the rain.  
Ensure the headphones are turned on and are properly charged.  
Ensure the headphones are properly paired with the mobile phone.  
Make sure that the mobile phone is connected with the headphones – if it does not  
connect, either refer to the mobile phone's Bluetooth menu or by pressing the MFB once  
(see “Turning Your Headphones On and Off” and “Pairing Your Headphones with a  
Bluetooth Mobile Phone”).  
I can't connect my headphones with mobile phone.  
Ensure your headphones are turned on and are properly charged.  
Ensure the headphones are properly paired with your mobile phone.  
Ensure your mobile phone’s Bluetooth feature is activated. Please refer to your mobile  
phone user guide for specific instruction.  
Ensure the headphones are within ten metres range of your mobile phone and there are  
no obstructions, such as walls or other electronic devices in between.  
If the above steps do not solve your problem, please recharge the headphones and remove  
your mobile phone’s battery for a while.  
I can’t turn off the headphones.  
• Do not use the headphones in stormy weather.  
• Do not clean the headphones while they are being charged. Always disconnect the  
charger from the headphones before cleaning.  
Recharge the headphones for two seconds then disconnect the charger from the  
headphones. The headphones now turn off.  
• Do not attempt to force open the built-in battery.  
• Dispose of the battery and the headphones according to local regulations. Do not dispose  
 
11  
of them as household waste.  
12  
FCC RF Radiation Exposure Statement:  
Care and Maintenance (cont’d)  
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled  
environment. End users must follow the specific operating instructions for satisfying RF  
exposure compliance. This transmitter must not be co-located or operating in conjunction  
with any other antenna or transmitter.  
• Only charge the headphones built-in battery in accordance with the instructions described in  
this user guide.  
• Avoid charging the headphones in extremely high or low temperatures.  
• Do not connect the headphones to the charger while on an active call.  
Built-in Battery  
• Do not attempt to replace the headphones‘ battery as it is in-built and is not changeable.  
• Dispose of the battery according to local regulations. Do not dispose of the battery as  
household waste.  
Care and Maintenance  
headphones  
• Charge the battery in accordance with the instructions supplied with this user guide.  
• Use only the charger supplied by the headphones’ original manufacturer to charge the  
battery.  
• Turn off your headphones before placing it in your pocket or bag. If the MFB is accidentally  
depressed, your mobile phone may place an unintended call.  
• Do not expose the headphones to liquid, moisture or humidity, or rain as it is not waterproof.  
• Do not use abrasive cleaners to clean the headphones.  
Charger  
• Use only the charger supplied by the headphones’ original manufacturer to charge the  
headphones. Other chargers may look similar but using them could be dangerous and could  
damage the headphones.  
• Do not attempt to disassemble the charger as it may expose you to dangerous voltages or  
other risks. Incorrect reassembly can cause electric shock when the headphones are  
subsequently used.  
• Do not expose the headphones to extremely high or low temperatures.  
• Do not leave the headphones in direct sunlight for an extended period of time.  
• Do not leave the headphones near open flames such as cooking burners.  
• Do not dispose of the headphones in a fire as it will result in explosion.  
• Do not bring the headphones into contact with any sharp objects as this will cause scratches  
and damages.  
• Do not stick anything inside the headphones as this may damage internal components.  
• Do not attempt to disassemble the headphones as they do not contain serviceable  
components.  
• Do not use the charger outdoors or in damp areas.  
• If you do not plan to use the headphones for a long period, please store them in a dry place  
that is free from extreme temperatures and dust.  
13  
14  
Declaration of Conformity  
Federal Communications Commission (FCC) Statement  
We, i.Tech Dynamic Limited, declare that the following product:  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may cause undesired operation.  
Product Name: i.Tech BlueBAND Sport  
Model No.: C51-B08003-XX  
Changes or modifications not expressly approved by the party responsible for compliance could  
void the user’s authority to operate the equipment.  
is in conformity with the following essential requirements of Council Directive 1999/5/EC  
(referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured  
in accordance with Annex II of the above directive.  
15.21  
You are cautioned that changes or modifications not expressly approved by the part responsible  
for compliance could void the user’s authority to operate the equipment.  
15.105(b)  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
i.Tech declares under our sole responsibility that the headset is in conformity with the  
provisions of the following Council Directives: 1999/5/EC.  
Notes on Environmental Protection  
After the implementation of the European Directive 2002/96/EU in the national legal system,  
the following applies: Electrical and electronic devices must not be disposed of with domestic  
waste. Consumers are obliged by law to return electrical and electronic devices at the end of  
their service lives to the public collection points that are set up for this purpose or designated  
points of sale. However, such details are defined by the national law of the respective country.  
This symbol on the product, the instruction manual or the packaging indicates that the product  
is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing  
old devices, you are making an important contribution in protecting our environment.  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
 
- Consult the dealer or an experienced radio/TV technician for help.  
15  
16  
2008 Hutchison Harbour Ring Enterprises Limited  
All rights in this publication are reserved and no part may be reproduced without the prior  
written permission of the publisher. The contents of this publication are believed to be correct  
at the time of going to press, but any information, specifications, products or services  
mentioned, and product I.D. shown may be modified, supplemented or withdrawn without  
further notice.  
The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring Enterprises  
Limited or its affiliates. All other trademarks or registered trademarks belong to their  
respective owners.  
Dispose of the packaging and this product in accordance with the latest provisions.  
is a trademark of SRS Labs, Inc. WOW HD technology is incorporated under license from SRS Labs, Inc.  
04/2008  
17  
 

Grizzly Paint Sprayer H8115 User Manual
Harmar Mobility Automobile Accessories AL001 User Manual
Hasselblad Camera Lens HC 28 80 User Manual
Healthrider Home Gym HREL09980 User Manual
HP Hewlett Packard Computer Accessories 370971 004 User Manual
HP Hewlett Packard Digital Camera ACC2 Aurora User Manual
Huey Chiao Bluetooth Headset HCB30 User Manual
Husqvarna Lawn Mower 327HDA65x series User Manual
Husqvarna Snow Blower 1330SB User Manual
iHome MP3 Docking Station IA91 User Manual