Honeywell Portable Generator 6065 User Manual

S6065A1003/2001  
LIQUID FLOW SWITCHES  
SPECIFICATION DATA & MOUNTING INSTRUCTIONS  
FEATURES  
Cost-effective flow switches for HVAC applications.  
High-capacity, fully-encapsulated NC/NO micro-switch.  
A single type suitable for pipes with a diameter of 1 to 8".  
COMMON SPECIFICATIONS  
Switching capacity  
Lifetime  
15 (8) A, 24...250 Vac  
50000 cycles at nominal load  
Working temperature  
-40...+85 °C at 90% rel. humidity,  
non-condensing  
Screw terminal, wire up to 1.5 mm2  
Electrical connection  
cable 6...9 mm  
Protection class  
Protection standard  
Housing material  
Accessories  
I according to EN60730  
IP65 according to EN60529  
ABS and corrosion-protected steel  
PA2 Paddle set  
S6065A2001  
MOUNTING  
The S6065A1003 and S6065A2001 Liquid Flow Switches can  
be mounted in any desired position far from elbows, valves,  
and filters.  
NOTE: The arrow on the housing must point downstream.  
When using multiple paddles, the paddles must be  
arranged in order of decreasing length downstream,  
i.e. with the longest paddle facing the oncoming  
liquid.  
S6065A1003  
GENERAL  
The S6065A1003 and S6065A2001 Liquid Flow Switches are  
designed for monitoring flow rates in pipes employed in HVAC  
applications. They are suitable for monitoring flow in water,  
oil, cooling circuits, and lubrication systems. The S6065A2001  
is designed for monitoring aggressive liquids.  
In the case of vertical pipes, reset the range to balance the  
paddle weight. To prevent malfunction caused by impurities in  
the medium, do not mount the device with the housing  
pointing downwards.  
See Table 1 for the reset and switch points for water. Data for  
other media must be determined empirically.  
MODELS  
Specification  
S6065A1003  
S6065A2001  
aggressive liquid  
Flow medium  
Mounting  
non-aggressive liquid  
Rp 1" (ISO7/1)  
120 °C  
Rp 1" (ISO7/1)  
120 °C  
Maximum pipe temperature  
Pressure  
11 bar  
30 bar  
Paddle material  
Lever  
1.4401  
1.4401  
yellow brass  
yellow brass  
113 x 70 x 65 mm  
850 g  
1.4404  
Sensor body  
Housing dimensions  
Weight  
1.4404  
108 x 70 x 72 mm  
850 g  
Approvals  
TÜV-approved  
TÜV-approved  
® U.S. Registered Trademark  
EN0B-0314GE51 R01008  
Copyright © 2008 Honeywell Inc. • All rights reserved  
 

Graco Car Seat PD192235A 9 11 User Manual
Grundig Vacuum Cleaner VCC9850 User Manual
Haier Air Conditioner 0010516146 User Manual
Harbor Freight Tools Greenhouse Kit 94515 User Manual
Heart Home Collectables Blower GFK 210 User Manual
Hotpoint Oven 6143 User Manual
HP Hewlett Packard Scanner 5400c Series 4400c Series User Manual
HP Hewlett Packard Switch Series 8212zl User Manual
Iluv Clock Radio INT170 User Manual
Impex Home Gym MP PWR100 User Manual