Hauppauge TV Receiver WinTV NOVA TD User Manual

Insert your WinTV Installation  
CD-ROM, the installation window  
will automatically appear.  
ote: During the installati-  
Non, other installation  
wizards may open, we recom-  
mend following the instructions  
in each of these and installing  
with the default options availa-  
ble.  
1. Connecting the WinTV-NOVA-TD  
Please ensure that Windows XP or Windows Vista is correctly  
installed and started before connecting the WinTV-NOVA-TD Stick to  
your computers USB 2.0 port. Due to power and bandwidth require-  
ment, we do not recommend connecting the unit into a USB Hub.  
To install, locate a free USB 2.0 port (normally located at the side or  
back on the computer). Plug the WinTV-NOVA-TD stick into the USB  
2.0 port. You can use a USB extender cable to locate the WinTV-  
NOVA-TD a short distance from the USB slot.  
ote: If the autorun does  
Nnot start, browse to the  
files on the disc and double  
click on the file called 'Setup'.  
WinTV-NOVA-TD  
ote: For advanced users  
Nyou can select the 'Custom  
Installation' which will allow  
you to modify the list of appli-  
cations that are installed by  
default.  
dual tuner  
Quick Installation Guide  
In the installation window click on  
Step 1: Install WinTV Drivers.  
A blue screen will open which will  
begin installing and updating the  
drivers for your product.  
© 2008 Hauppauge Computer Works · QI-NOVA-TD-V2.0-ENG · 2008/02/05  
ote: if you plug the device into a different USB socket, you  
will need to reinstall the WinTV-NOVA-TD driver, but you  
N
will not need to reload any WinTV applications.  
Tech Support: (+44) 0207 378 0202  
Hauppauge Computer Works, Ltd.  
2. Connecting the Aerial  
Telephone: (+44) 0207 378 1997  
Fax: (+44) 0207 357 9171  
10 Borough High Street  
Bank Chambers  
It is recommended to connect to  
a roof top aerial during the first  
time installation as this may pro-  
vide a better signal quality then  
the provided portable antenna.  
You will need to ensure that you  
are located in a area that has  
London, UK, SE1 9QQ  
Once the WinTV installation is complete, click OK then Exit in the  
window "Hauppauge WinTV Installation CD". You should now be back  
at your Windows desktop.  
Tech Support: (+1) 631 434 3197  
Telephone: (+1) 631 434 1600  
Fax: (+1) 631 434 3198  
Hauppauge Computer Works, Inc.  
91 Cabot Court  
Hauppauge, NY 11788  
Once complete, a message appe-  
ars in the bar. If this message is  
Drivers have been updated  
Successfully, click on the bar to  
exit. If the message reports an  
error, check the connection of  
your WinTV, or contact our tech-  
nical support.  
Tech Support: (+65) 276 4412  
Telephone: (+65) 276 9163  
Fax: (+65) 276 9167  
Hauppauge Digital Asia, Pte. Ltd.  
Blk 1093, Lower Delta Road #04-05  
Tiong Bahru Industrial Estate  
Singapore 169204  
Digital Terrestrial coverage.  
The WinTV-NOVA-TD adopts the revolutionary Diversity technology  
which enormously improves mobile reception sensitivity when used  
with indoor antenna reception or while on the move.  
Included in this package  
Next, click on Step 2: Install  
WinTV and select your language  
from the list. The setup window  
should appear and begin to auto-  
matically install the WinTV appli-  
cations.  
3. Install the WinTV Drivers and Applications  
WinTV-NOVA-TD unit  
USB extension cable  
TV antenna with IEC connector  
TV antenna with MCX connector  
Aerial 'Y' splitter  
Remote control  
Installations CD-ROM with:  
· WinTV Application  
ote: If you have any anti-virus software enabled, please dis-  
Nable it during the installation of the software.  
When you attach the WinTV-  
NOVA, the Found New Hardware  
Wizard will appear.  
Click on Cancel.  
· WinTV Utilities  
This installation guide  
Page 1  
Page 2  
Page 3  
Page 4  
Place the antenna in a suitable  
location, when you receive at  
least one channel, go to the  
WinTV channel manager, click  
on Sources and DVB-T source,  
to see Signal Status.  
Unplug one of the antennas and  
move the other one to have the  
best quality level in Signal  
Status. Unplug this antenna and  
plug in the other one to now  
optimize this antenna. Antennas  
must be a slight distant apart  
for best result.  
®
Adding a TV channel manually  
Plug your roof top aerial or  
portable TV antenna into  
the WinTV’s TV IEC  
Connector.  
TV Mode  
4. New WinTV v6 Application  
If the scan did not succeed, you can add a channel manually by enter-  
ing the LCN number for your local transmitter. Enter your post code in  
DVB-T of your country) to be presented with the local transmitters.  
You need to write down the LCN numbers.  
When you click the Full screen TV button, TV will appear full  
screen on your PC monitor. When finished watching TV full screen,  
click your right mouse button in the TV window. If you see video with  
a black box around it, click the Pref button then click TV mode tab.  
Check the box which says Allow resolution change”.  
To start the WinTV application double click on the WinTV icon.  
When you run WinTV for the first  
time, a message will appear ask-  
ing you to scan for tuner chan-  
nels now; please ensure that the  
TV antenna is connected, click  
YES.  
In the WinTV Channel Manager, click on Sources and DVB-T Source,  
enter the LCN numbers into the space under Channel Number and  
click on the Tune button. The channel will be added only if the locked  
box is checked after clicking Tune. If necessary, reposition your  
portable antenna, for example near a window, to increase the recep-  
tion quality.  
"Always on top" Mode  
Will always be visable on your Windows desktop on top any  
applications. To turn on, click the Always on top button. It will turn  
green. To turn off, click this button again.  
Plug the portable TV antenna or  
your roof top aerial, using the IEC  
to MCX connector, into the  
A convenient way to use Always-on-top is to make the TV window in  
the no-title mode small, and to make the TV window in the title mode  
larger. Then you can switch from a small window to a larger one by  
clicking the right mouse button.  
WinTV’s TV MCX Connector.  
The minimum signal level to engage the Diversity mode is just 3  
blocks on each antenna. When plugging the two antennas, the quality  
level should then increase.  
Pref button  
Click the Pref button to open the preferences menu:  
View: These are the settings for the On Screen Display of the TV  
channel and Audio Volume, where you can enable Close Captions (if  
supported in your system configuration), plus controls for the Toolbar  
mode (Title mode), NoToolbar mode (No Title) and Full Screen (TV  
mode).  
Watch TV  
Minimise  
TV Mode  
Volume  
Channel up  
Channel down  
Channel surf  
Last channel  
Freeze picture  
Remove toolbars  
no title mode  
Close  
Movies: Here is where you configure some video and audio settings.  
You can set the movie record directory (DVCR Record File Path).  
Snapshot: Set the size of your captured images, plus single or two  
field captures for capturing motion or still image video.  
Always on Top  
Mute  
Click your right mouse button  
in the TV window to remove  
toolbars. Click again to  
restore toolbars.  
Pref: Configuration  
Setup Menu  
Audio: Your audio settings are configured here.  
Select your country location, for instance, select United Kingdom and  
then, select Scan.  
The scanning process for DVB-T will scan from channels. When a  
DVB-T channel is found, the Signal Status will show a quality level  
and the locked box will be checked. The DVB-T digital channels that  
are found will appear in the channel listing box.  
Menu Button  
CFG  
Click the Menu button to open the TV setup menu. Here is the main  
control bar for TV channels, and duplicate controls for other functions:  
Suite-Manager: Configure the TV tuner (scanning, naming, channel  
pre set, etc..) and setting up favourite channel lists.  
Configuration: Duplicate configuration menus for colour, audio, etc.  
View: For settings an exact TV window size: 320x240, 640x480 etc.  
Configure Snapshot  
Diversity Tool  
Current TV channel  
Click your right mouse  
button here to see the  
channel selector  
Snapshot Still  
capture  
Increase reception on WinTV-NOVA-TD (Diversity mode)  
You can use WinTV-NOVA-TD in  
Snapshot viewer  
window:  
Double click on each  
thumbnail to see  
image full size.Click  
and hold your right  
mouse button to see  
image options.  
Diversity mode, this increase the  
ote: If you have attached an antenna and do not receive any  
digital TV channels, either use a stronger antenna (a roof  
reception by using the two tuners  
to create one clear signal.  
N
top antenna is recommended for best reception) or try to  
TV-Mode Pause Record Playback  
For this, click on Start / All pro-  
grams / Hauppauge WinTV and  
Diversity Tool and select 'Use in  
Diversity Mode'. This disable the  
Dual Tuner function. Click OK and  
restart your computer for your  
changes to take effect.  
add a TV channel manually.  
Click Close when finished.  
Changing channels  
You can change channels by using the Channel Up or Channel Down  
buttons on the WinTV. You can type a channel number (for example:  
27) and WinTV will tune to that channel. If the entered channel does  
not exist, you will see a black window.  
You can also right click in the Current TV channel box, where you will  
see a list of channels. Or type letters (for example: BBC) to access to  
the list of the channels including these letters.  
Page 6  
Page 5  
Page 7  
Page 8  
Pause Buffer  
Skip Ahead  
Pause  
Record and Pause  
The Pause buffer is space on your hard disk where video is stored  
during the Pause mode. The maximum amount of time which your TV  
program can be delayed is dependent upon how much storage space  
you have set for the Pause buffer.  
Clicking the Skip button will skip the video ahead 10 seconds.  
Clicking the Pause button while Playing will pause your  
audio/video.  
There are three buttons to control the watching, recording and paus-  
ing of TV. Clicking on the Pause button will cause the Pause menu to  
roll down from the WinTV application, while clicking on the Record  
button will cause the Record menu to roll down.  
Rewind  
Clicking the Rewind button while playing video will rewind the  
recorded video. Clicking the Rewind button again will continue the  
playing.  
Rewind  
Clicking the Rewind button will play the video file in reverse.  
Clicking the Rewind button again will continue the playing of the  
video.  
Clicking the Pause button makes WinTV to start recording into WinTV's  
Replay Buffer. It takes about 10 seconds for the Replay Buffer to be ini-  
tialized and for Pause to become effective.  
Unclicking the Pause button will cause the audio/video program to  
start playing from the point where the button was originally pushed.  
Most WinTV functions are active while in the Pause or Pause Live  
mode. For example, you can change volume, resize the TV window,  
go into "no-title mode", etc.  
While in Pause mode, the Video Position bar shows the amount of the  
Replay Buffer which is filled with video. For example, if the Video  
Position indicator shows halfway, it means that half of the Replay  
Buffer is filled. If you find you cannot Pause as many minutes as you  
would like, increase the size of the Replay Buffer.  
Record and Playback  
Slow Motion  
Clicking the Slow Motion button while playing video will play in  
Slow Motion. Clicking the Slow Motion button again, will continue  
playing normally.  
Fast Forward  
Clicking the Fast Foward button one time will fast foward your  
video at 2X speed. Clicking the Fast Foward button two times will fast  
foward your video at 8X speed. Clicking the button again will continue  
playing back at normal speed.  
TV Mode  
One Touch Pause One Touch Record  
The One Touch Pause button prepares the WinTV pausing live video.  
The One Touch Record OTR) button will start a record session. If you  
click OTR more than once, a record timer will be set and the record-  
ing will be done for 15 minutes for each time the OTR button is  
clicked. For example, if you click the button 3 times, the WinTV will  
record for 30 minutes.  
Fast Forward  
Clicking the Fast Forward button one time will fast forward your  
video at 2X speed. Clicking the Fast Forward button two times will fast  
forward your video at 8X speed.  
Slow Motion  
Clicking the Slow Motion button during playback will cause the  
video to play in slow motion (at 1/2 speed). Clicking the Slow Motion  
button again will return the video to normal playback speed.  
Keyboard shortcuts  
Click on the One Touch Record button on the WinTV application to  
open the Record and Playback control bar.  
While in Pause mode, the A/V stream is always saved in the Replay  
Buffer. To stop saving the A/V stream in the Replay Buffer, you must  
exit the Pause mode by clicking TV mode.  
File button  
Sound up - Page Up  
Sound down - Page Down  
Plus (+) - Chanel Up  
Minus (-) - Channel Down  
Ctrl T - Frame TV  
Ctrl F - Still image  
Clicking the File button opens the File menu. The last file record-  
ed is listed in the File name box. In the File menu you can:  
Ctrl M - Default settings  
Alt M - Re-size TV menu  
0-9 - Channel number  
Space bar - Take a Snapshot  
One Touch Record  
Rename your recorded video file: To rename a video file, find the  
file you would like to rename, highlight it with your mouse, and click  
and hold the right mouse button. Go down to Rename and then you  
can type in a new name. Remember: you must keep the MPG  
extension on the file.  
Play a video file previously recorded: Find the file you would like to  
play, highlight it with your mouse (one click of the mouse button)  
and click Open. Then click the Play button.  
Display Counter  
Replay  
File  
While in the Pause mode, hitting the Replay button acts like the  
Instant Replay you see on TV broadcast sporting events: the  
audio/video goes back in time and you repeat what you have previ-  
ously seen. Each click of the Replay button causes audio/video to go  
back 10 seconds. For example, if you want to repeat the audio/video  
you saw 10 seconds ago, you would click the Replay button once. If  
you want to see the video you saw one minute ago, you would need  
to click the Replay button six times.  
Ctrl P - Frame Print  
Stop  
Rewind Pause  
Play Forward  
Video-Position  
Play forward slow  
Clicking the Record button will automatically generate a file name and  
start recording your audio/video program.  
Functions:  
When recording TV, the record button will depressed  
A time counter will be shown indicating the lenght of time of the  
recording  
Delete recorded video files which you no longer want: Click your  
right mouse button on the video file once, go down the menu and  
click Delete.  
For extended replay times, you might find it more convenient to grab  
the Video Position indicator control bar and move it to the left. Once  
you let the control bar go, audio/video starts to play (it might take a  
few seconds for the WinTV application to start playing).  
You might have to move the Video Position indicator to the left and  
right to find the desired spot to start replaying audio/video.  
While Replaying, your audio/video program continues to be recorded  
in the Replay Buffer. Therefore, if you have clicked the Replay button 3  
times (so that you are replaying the audio/video seen 30 seconds  
ago), the video you see in the WinTV window will be 30 seconds  
behind the live program.  
One Touch Pause  
If you click Stop the time counter will revert back to 00:00:00  
The time is specified in a Hour:Minute:Second format.  
The pause mode allow you to pause the Live TV picture and allows  
you to use the TimeShift function to rewind and fast forward the TV.  
Clicking the Pause button on the WinTV application starts the Pause  
mode. The Pause Menu will drop down.  
Stop  
Clicking the Stop button will stop the video you are recording or  
playing back.  
Time counter  
Skip forward 10 sec  
Play  
Fast forward  
Clicking the Play button will playback from disk the last video file  
created. When playing a video, you can rewind, fast forward, replay  
10 sec or skip forward 10 sec using the buttons on the control bar.  
Video-position  
Fast rewind Pause  
Play Fast forward  
Slow motion  
 
Page 9  
Page 10  
Page 11  
Page 12  

Graco Heat Pump 312468E User Manual
Grizzly Planer G0544 User Manual
Guardian Technologies Network Card K1148 X 4 98 User Manual
Harman Kardon Home Theater System DPR 1001 User Manual
Hasbro Robotics 15200 User Manual
Hoshizaki Server KM 2400SRF3 User Manual
HP Hewlett Packard Network Router e1200 160 User Manual
Hyundai IT CD Player H CMD4006 User Manual
IBM Network Card PCMCIA Card User Manual
IKEA TV Video Accessories AA 316674 7 User Manual