Harman Kardon DVD Player DVD 506 User Manual

DVD 506 Limited Edition Digital Versatile Disc Player

OWNER’S MANUAL

Power for the Digital Revolution^®

Introduction

Thank you for choosing the Harman

A wide range of programming features makes it

easy to program an evening’s worth of entertain-

ment. When playing DVDs, easy-to-understand

on-screen menus and icons make it simple to

change languages, soundtracks, subtitles or

aspect ratio, while a parental-lock function

enables you to control which discs may be

viewed by younger members of the household.

I Plays a Wide Range of Video and Audio

Formats, Including DVD-Video Discs,

VCD, Standard CD Audio Discs, CD-R/RW,

DVD-R/RW, DVD-+R/RW, Audio Discs and

MP3 Discs

Kardon DVD. The DVD is a multipurpose DVD

player, capable of playing both DVD-Video discs

and conventional CD audio discs with the highest

fidelity and access to future software upgrades

via the Internet. Along with conventional DVD-

Video and CD audio discs, the DVD is also com-

patible with MP3, WMA, JPEG and most record-

able CD and DVD formats as well as VCD discs.

I High-Quality Video Playback 10-Bit

DACs, Progressive Scan and Component

Video Outputs

DVD players are among the fastest growing con-

sumer electronics products ever brought to mar-

ket, but this may, nevertheless, be the first DVD

player you’ve owned. Although many of the fea-

tures of the DVD resemble those of standard CD

players, there are a number of functions that you

may be unfamiliar with. To ensure that you are

able to take advantage of all the power and flex-

ibility the DVD has to offer, we encourage you to

review this quick setup manual. That small

investment of your time will pay major dividends

in the enjoyment you will get from proper use of

the DVD.

I Dolby Digital and DTS Data Signal

Output Through Both Optical and

Coaxial Digital Audio Connections

To enable you to get the maximum quality from

DVDs, the DVD is equipped with the latest in

design techniques, including advanced 10-bit

video digital-to-analog converters (DAC) and

Video (composite), S-Video and RGB video (RGB

via SCART) outputs, to ensure that you get all the

quality inherent in today’s DVD medium. For opti-

mum playback of NTSC and PAL DVD with com-

patible high-definition display devices, DVD is

equipped with progressive component video out-

puts.

I Audiophile-Grade Wolfson Output DACs

for the Finest Audio reproduction

I Easy-to-Use On-Screen Navigation

System

I Playback of MP3 and Windows^®WMA

Audio Discs and JPEG image files

I Simultaneous Playback of MP3 and JPEG

files

In addition, Harman Kardon’s audio heritage

continues into the digital video era with audio-

phile-grade Wolfson DACs to ensure that the

audio quality matches the superb video. Of

course, both coaxial and optical digital audio

outputs are available for direct connection to A/V

receivers or processors so that you may take

advantage of Dolby Digital* and DTS^®sound-

tracks. When playing audio CDs, the playback

quality is state-of-the-art, matching that of the

finest players available.

I Extensive Programming Capability for

Audio and Video Discs

I Parental Lock Controls Prevent

Unauthorized Viewing of Restricted

Movies

I Multiple Options for Language,

Soundtrack and Subtitle Selection

I Multiple-Angle Capabilities With

Specially Encoded DVD Discs

I Backlit, Ergonomically Designed Remote

Control

INTRODUCTION 3

Terminology

Title: For a DVD, a title is defined as an entire

movie or program. There can be as many chapters

within a title as the producers decide to include.

Most discs include only one title, but some may

have more than one, to give you a “Double

Feature” presentation.

Multiple Angle: DVDs have the capability to

show up to four different views of the same

scene in a program. When a disc is encoded with

multiple-angle information, pressing the Angle

button will enable you to switch between these

different views. Note that at present, few discs

take advantage of this capability and, when they

do, the multiple-angle technology may only be

present for short periods of time within the disc.

Producers will usually insert some sort of icon or

graphic in the picture to alert you to the availabil-

ity of multiple viewing angles.

Terminology

Since they share some of the characteristics and

technology of CD players, many of the terms and

operational concepts used in a DVD player are

similar to what you may be familiar with from CD

players and changers, or older video disc formats

such as Laser Disc. However, if this is your first

DVD product, some of the terms used to describe

the features of a DVD player may be unfamiliar.

The following explanations should solve some of

the mysteries of DVD, and help you to enjoy all

the power and flexibility of the DVD format and

the DVD.

Chapter: DVD programs are divided into chap-

ters and titles. Chapters are the sub-sections pro-

grammed into a single title on a disc. Chapters

may be compared to the individual tracks on an

audio CD.

RGB Video: This is a new form of video signal

that eliminates many of the artifacts of traditional

composite video signals by splitting the signal

into the three fundamental colors Red, Green and

Blue (RGB). With an RGB connection (via SCART),

you will see greater picture resolution and elimi-

nate many picture imperfections such as the

moiré patterns often seen on checkered pat-

terned cloths. However, in order to benefit from

RGB video, you must have a video display with an

RGB compatible SCART input.

Reading: This is a message that you will see

after you´ve loaded the disc and the tray has

closed. It refers to the fact that the player must

first examine the contents of the disc to see if it is

a CD or DVD, and then extract the information

about the type of material on the disc, such as

languages, aspect ratios, subtitles, number of

titles and more. The slight delay while the con-

tents of the disc are read is normal.

With the arrival of DVD, disc data capacity has

increased dramatically. On a DVD Video disc most

of this capacity is taken up by MPEG 2 video and

the multichannel movie soundtrack in Dolby

Digital and/or DTS. This information is compressed.

Aspect Ratio: This is a description of the width

of a video image in relation to its height. A con-

ventional video screen is four units wide for every

three units of height, that’s why the ratio is called

”4:3”. Newer wide aspect ratio video displays

are 16 units wide for every nine units of height,

making them more like the screen in a movie the-

ater. The program material on a DVD may be

recorded in either format and, in addition, you

may configure the DVD to play back in either for-

mat, depending on the features recorded on a

disc.

Resume: The operation of the Stop Button on

the DVD works differently from what you are

used to on CD players. On a traditional CD player,

when you press the Stop button, the unit does

just that: it stops playback. On a CD player, when

you press the start button again, the disc starts

from the beginning. With the DVD, however, you

have two options when playing DVD discs.

Pressing Stop once will stop playback, but it actu-

ally puts the unit in the Resume mode. This

means that you can turn the machine off and,

when you press play the next time, the disc will

resume or continue from the point on the disc

where the Stop button was pressed. This is help-

ful if you are watching a movie and must inter-

rupt your viewing session but wish to pick up

where you left off. Pressing the Stop button twice

will stop the machine in a traditional manner

and, when the disc is played again, it will start

from the beginning.

Progressive scan: DVD offers progressive scan

video outputs for use with compatible high-reso-

lution televisions and projectors. Before DVD, no

consumer medium could store, transmit or display

video with full resolution. To conserve bandwidth,

analog compression (interlacing) is employed: first

the odd-numbered lines of a frame are displayed,

followed by the even-numbered lines. The result is

that only half of the video image is drawn at one

time; the viewer's brain must reassemble the com-

plete image. This is acceptable, if the monitor is

not too large and if there is not too much motion

in the image. Large displays and fast-moving

images reveal the limitations of this system.

Thanks to DVD's immense data capacity, images

are now stored intact (progressively), so that all

the lines in each frame (odd and even) are shown

at the same time. But because most TV's cannot

handle a progressive signal, all current DVD play-

ers generate an interlaced output for compatibili-

ty. Now, the Harman Kardon DVD is among the

select few DVD players with true progressive scan

video output (NTSC and PAL) for use with com-

patible TV's and CRT projectors and with all plas-

ma, LCD and DLP display devices via the compo-

nent video output. The result is 40% greater light

output than a conventional TV and a stunningly

detailed high definition image, along with an

almost complete absence of visible scanlines and

motion artifacts. Of course, traditional Y/Pr/Pb

component video, SCART, S-Video and composite

video outputs are included for use with conven-

tional televisions and projectors.

In resume mode, the cover of the DVD will be

displayed, if available. Otherwise, the

Harman Kardon screen will appear.

4 TERMINOLOGY

Features

High quality video

• Advanced sophisticated 10-bit MPEG-2 video

decoding circuits.

Compatible with CD

as well as DVD

• The DVD will play any conventional Audio CD or

recordable (CD-R) or erasable CD (CD-RW)

bearing the logos shown here, MP3, WMA (v8)

or any VCD or DVD-Video with the region code

0 or 2.

Upgradeability via Internet

The ”firmware” controlling the functionality of

the Harman Kardon DVD is fully upgradeable. In

the event of future improvements to its

operations and features, it will be possible to

download firmware upgrades from

www.harmankardon.com/International/

All you have to do is create a CD-R with the

data and insert it in the DVD for an automatic

upgrade.

• Direct RGB output via SCART (selectable) for

optimum video performance. SCART connector

also configurable for Composite Video output.

• Pure PAL with NTSC disc due to true

NTSC/PAL conversion.

Disc formats supported

by this player

The unit can play the following disc formats

(8 cm and 12 cm size):

• DVD-Video

• DVD-R

• DVD-RW

• DVD+R

• DVD+RW

• CD

• Dual-layer compatibility for extended play

DVD.

Packing List

1 Harman Kardon DVD Player

• Progressive Scan component video ouputs

(NTSC and PAL)

1 Remote control

• Playback of JPEG image files

2 AA batteries

High quality digital audio

1 A/V cable for stereo analog audio and

composite video

• By connecting a DTS (Digital Theater Systems)

or a Dolby Digital decoder, you can enjoy high

quality 5.1 digital surround sound from DTS or

Dolby Digital discs.

1 S-Video cable

• CD-R

• CD-RW

• VCD

1 remote extension cable

1 owner's manual

• With linear PCM audio at 16-24 bits and

44-96 kHz (also on digital output, see table

page 15), audio quality exceeding that of CD

becomes possible.

• S-VCD

NOTE: Due to differences in the format of

certain discs, it is possible that some discs may

include a mix of features that are not compatible

with the DVD. Similarly, although the DVD is

capable of a wide range of features, not all discs

include every capability of the DVD system. For

example, although the DVD is compatible with

multi-angle discs, that feature is only possible

when the disc is specially encoded for multiple-

angle play. In addition, the DVD is capable of

playing back both Dolby Digital and DTS sound-

tracks, but the number and types of tracks avail-

able will vary from disc to disc. To make certain

that a specific feature or soundtrack option is

available, please check the options noted on the

disc jacket.

• Optical and coaxial digital audio output.

Many convenient features

• On-Screen Menu lcons for disc information or

player information and access to many major

functions of this unit.

• Subtitles may be displayed in one of numerous

languages*.

• The multi-angle function allows you to choose

the viewing angle of scenes which were shot

from a number of different angles (Limited to

DVD’s recorded with multiple camera angles.)

• Multiple options for dialog language and

soundtrack selection (limited to DVD’s record-

ed with multiple dialog languages or sound-

tracks).

I Playback capability for CD-R, CD-RW, WMA,

JPEG, MP3, VCD/SVCD, DVD-R, DVD+R, DVD-

RW and DVD+RW discs may vary due to vari-

ations in the quality of the disc and the

recorder used to create the disc.

• Parental lock settings to prevent play of discs

unsuitable for some audiences [DVD only].

• Intuitive menu operating system.

• 4 step Zoom during play and pause.

• Backlit, ergonomically designed remote

control.

• Future software upgrades accessible via

Internet. (See information below.)

* The number of languages recorded depends

on the software.

FEATURES 5

Front Panel Controls

Main Information Display

Power On/Off (Standby)

Eject

Play

Pause

Stop

Skip/Search (Previous)

Skip/Search (Next)

Dimmer

Main Information Display: This display

Pause: Press this button to momentarily

Skip/Search (Previous): Press this button

delivers messages and status indications to help

you operate the DVD player.

pause playback. To resume playback, press the

button again. If a DVD is playing, action will

freeze and a still picture will be displayed when

the button is pressed.

to move backward through the music tracks on

a CD disc or the chapters on a DVD disc. Keep

the button pressed to search backwards at one

of the available speeds.

Power On/Off (Standby): Press the button

once to turn the DVD player on, press it again to

put the unit in the Standby mode.

Stop: Press this button once to place the

Skip/Search (Next): Press to move forward

disc in the Resume mode, which means that

playback will stop, but as long as the tray is not

opened or the disc changed, DVD playback will

continue from the same point on the disc when

the Play Button is pressed again. Resume will

also work if the unit was turned off. To stop a

disc and have play start from the beginning,

press the button twice.

through the music tracks on a CD or the chap-

ters on a DVD disc. Keep the button pressed to

search forwards at one of the available speeds.

Disc Tray.

Eject: Press this button to open or close the

Play: Press to initiate playback or to resume

Dimmer: Press this button to reduce the

playback after Pause has been pressed.

brightness of the Information Display by 50% or

to turn the display off completely in the

following order: FULL BRIGHTNESS ➔ HALF

BRIGHTNESS ➔ OFF ➔ FULL BRIGHTNESS.

6 FRONT PANEL CONTROLS

Front Panel Information Display

JPEG MP3

VCD

PROG RANDOM REPEAT 1 ALL

A-B

V. OFF

HOUR

P. PROG

SEC

PBC

TITLE

TRACK CHAPTER

MIN

DVD

WMA

A Disc Type Indicators

B Playback-Mode Indicators

C Progressive Scan Indicator

D Parental Lock Indicator

E Time Indicators

F V-OFF Indicator

G Repeat Indicators

H VCD Playback Control Indicator

I Random Indicator

J A-B Repeat Indicator

K Program Indicator

L Angle Indicator

M Title Indicators

N Chapter/Track Number Indicators

A Disc Type Indicators: The DVD, CD, VCD,

MP3, WMA or JPEG indicator will illuminate to

show the type of disc currently being played.

E Time Indicators: These positions in the

indicator will show the running time of a DVD in

play. When a CD is playing, these indicators will

show the current track time, time remaining in

the current track, or the total remaining time on

the disc.

H VCD Playback Control Indicator: This

indicator lights when the playback control func-

tion is turned on with VCDs.

B Playback-Mode Indicators: These indica-

tors light to show the current playback mode:

I Random Indicator: This indicator lights

when the unit is in the Random Play mode.

› Lights when a disc is playing in the normal

mode

J A-B Repeat Indicator: This indicator lights

when a specific passage for repeat playback has

been selected.

NOTE: The Indicators MNE will also display

text messages about the DVD’s status, including

Reading when a disc is loading,

STANDBY when the unit is turned off, and

Disc Error when a disc not compatible

with the DVD is put into the play position.

Lights when the disc is in the Fast Search

Forward mode. The on-screen banner display

indicates the selected speed (2x, 8x, 16x, 100x).

K Program Indicator: This indicator lights

when the programming functions are in use.

Lights when the disc is paused.

Lights when the disc is in the Fast Search

L Angle Indicator: This indicator blinks when

alternative viewing angles are available on the

DVD currently playing.

F V-OFF Indicator: This indicator lights when

the unit's video output has been turned off by

pressing the V-OFF button on the remote con-

trol.

Reverse mode. The on-screen banner display

indicates the selected speed (2x, 8x, 16x, 100x).

M Title Indicators: These two positions in the

display will show the current title number when

a DVD disc is playing.

C Progressive Scan Indicator: This indicator

lights when the unit sends out a progressive

scan signal.

G Repeat Indicators: These indicators light

when any of the Repeat functions are in use.

N Chapter/Track Number Indicators: When

a DVD disc is playing, these two positions in the

display will show the current chapter. When a

CD disc is playing they will show the current

track number.

D Parental Lock Indicator: This indicator

lights when the parental-lock system is engaged

in order to prevent anyone from changing the

rating level without a code.

FRONT PANEL INFORMATION DISPLAY 7

Remote Control Functions

POWER ON

POWER OFF

SUBTITLE

TITLE

ANGLE

AUDIO

ENTER

OPEN/CLOSE

OSD

ARROWS

INFO

PAUSE

STATUS

SKIP/STEP (PREVIOUS)

SKIP/STEP (NEXT)

PLAY

SEARCH/SLOW REVERSE

STOP

SEARCH/SLOW FORWARD

DISPLAY

PIC +/PIC -

ZOOM

PLAYLIST

RANDOM

A-B Repeat

V.OFF

LIGHT

NUMERIC KEYS

REPEAT

CLEAR

8 REMOTE CONTROL FUNCTIONS

Remote Control Functions

POWER ON: Turns on the player when it is

STATUS: Press while a disc is playing to

DISPLAY: Press to change the brightness of

in standby mode (Harman Kardon logo appears

on screen).

view banner display. Use the ARROW buttons to

move through the different features in the

Banner Display. When a symbol is highlighted,

press ENTER on the remote to select it.

the front panel display or to turn the display off

completely in the following order: FULL BRIGHT-

NESS ➜ HALF BRIGHTNESS ➜ OFF ➜ FULL

BRIGHTNESS

POWER OFF: Turns off the player to stand-

by mode.

SKIP/STEP (Previous): Press to go to

PIC+/PIC-: Pressing these buttons in JPEG

SUBTITLE: When a DVD is playing, press to

beginning of current track. Press again quickly to

go to beginning of previous track. After pressing

the PAUSE button, each press of this button will

move the image in reverse frame by frame.

mode will move to the previous or next image.

select a subtitle language or to turn subtitles off.

ZOOM: When a DVD or VCD is playing,

TITLE: When a disc is playing, press to

press this button to zoom the picture so that it is

enlarged. There are 4 steps to the zoom func-

tion, each progressively larger. Press through

each of the zoom stages to return to a normal

picture.

show the number of the title currently played.

Press TITLE again to jump to the subsequent title

(with the next title number) on the disc. Note

that this function works (most times) even if title

jump is prohibited by a DVD´s playback control.

SKIP/STEP (Next): Press to go to begin-

ning of next track. After pressing the PAUSE

button, each press of this button will move the

image forwards frame by frame.

PLAYLIST: Press this button to change the

ANGLE: Press to access various camera

PLAY: Begins to play disc (closes disc tray

playback order of the disc.

angles on a DVD (If the DVD contains multiple

camera angles).

first, if it is open.)

RANDOM: Press for RANDOM playback in

SEARCH/SLOW (REV): Allows you to

random order.

AUDIO: Press to access various audio

search in reverse through a disc while it is in

play mode. Each time you press this button, the

search speed changes as indicated by a number

of arrows on the right top of your screen.

After pressing the PAUSE button, each press of

this button will change the slow down speed

indicated by a number of arrows in the right top

of the screen.

languages on a DVD (If the DVD contains

multiple audio streams).

PA-B: Press to select section A-B and to play

repeatedly.

ting or option

ENTER: Press this button to activate a set-

Q V.OFF: Press to turn off video output for

improved performance from audio-only discs.

Press again to restore video output.

disc tray.

OPEN/CLOSE: Press to open or close the

LIGHT: Press to illuminate remote

controller.

OSD: Press to access the On Screen Display

STOP: Stops playing a disc. When a disc is

S NUMERIC KEYS: Select numbers by

playing, if you press STOP and PLAY, the disc will

resume play, i.e. it will start from the same point

on the disc where the unit was stopped. If you

press STOP twice and the PLAY button, the disc

will start play from the beginning.

pressing these buttons.

ARROW buttons (

move the cursor in the OSD.

INFO: Press once for detailed informations

): Use to

REPEAT: Press to go to the Repeat menu.

You can repeat a chapter, track or the entire

disc.

on the disc playing (Video/Audio Bit rate, Movie

aspect ratio and others), press again for current

player settings made. Note that the unit doesn´t

react on any transport button as long as the info

menu is displayed. Press again to remove infor-

mation from screen.

CLEAR: Press to remove the Banner menu

SEARCH/SLOW (FWD): Allows you to

from the screen.

search forward through a disc while it is in play

mode. Each time you press this button, the

search speed changes as indicated by a number

of arrows on the right top of your screen.

After pressing the PAUSE button, each press of

this button will change the slow down speed as

indicated by a number of arrows in the right top

of the screen.

MENU: Displays the actual DVD Disc Menu

on the TV screen in play mode.

PAUSE: Freezes a picture (with DVD/VCD)

and pauses the playback signal (CD) when a disc

is playing. Press again for normal playback.

REMOTE CONTROL FUNCTIONS 9

Rear Panel Connections

™

Optical Digital Output

Coaxial Digital Output

Analog Audio Outputs

Composite Video Output

∞

S-Video Output

Component Video Outputs

Scart TV Output

‚

Remote Control Input

AC Power Cord

•

Remote Control Output

Optical Digital Output: Connect this jack

∞

S-Video Output: Connect this jack to the

• Remote Control Output: Connect this

to the optical digital input of an A/V receiver or

surround processor for Dolby Digital, DTS or

PCM audio playback.

S-Video input on a television or video projector,

or to an S-Video input on an A/V receiver or

processor if you are using that type of device for

S-Video input switching.

jack to the infrared (IR) input jack of another

compatible Harman Kardon remote controlled

product to have the built-in Remote Sensor on

the DVD provide IR signals to other compatible

products.

™

Coaxial Digital Output: Connect this jack

to the coaxial digital input of an A/V receiver or

surround processor for Dolby Digital, DTS or

PCM audio playback.

Component Video Outputs: These out-

puts carry the component video signals for con-

nection to display monitors with component

video inputs. For standard analog TV's or projec-

tors with inputs marked Y/Pr/Pb or Y/Cr/Cb, con-

nect these outputs to the corresponding inputs.

If you have a high-definition television or projec-

tor that is compatible with high scan rate pro-

gressive video, connect these jacks to the “HD

Component” inputs. Note that if you are using a

progressive scan display device, then

Remote Control Input: Connect the out-

put of a remote infrared sensor, or the remote

control output of another compatible Harman

Kardon product, to this jack. This will enable the

remote control to operate even when the front

panel Remote Sensor on the DVD is blocked.

This jack may also be used with compatible IR

remote control-based automation systems.

NOTE: The coaxial digital output should only be

connected to a digital input. Even though it is

the same RCA-type connector as standard ana-

log audio connections, DO NOT connect it to a

conventional analog input jack.

Analog Audio Outputs: Connect these

‚

AC Power Cord: Connect this plug to an

jacks to the analog audio input on an A/V

receiver or surround processor for analog audio

playback.

AC outlet. If the outlet is controlled by a switch,

make certain that it is in the ON position.

”Progressive” must be selected in the Video Set-

up Menu in order to take advantage of the pro-

gressive scan circuitry. See page 17 for more

information on progressive scan video.

Note: You’ll find more details about all

Audio/Video connections under Setup and

Connections on the following pages.

Composite Video Output: Connect this

jack to the video input on a television or video

projector, or to a video input on an A/V receiver

or processor if you are using that type of device

for video input switching.

IMPORTANT: These jacks should NOT be con-

nected to standard composite video inputs.

SCART OUT (TV): If your TV has a SCART

socket, you can connect a SCART cable to your

TV and to your DVD Player for improved video

quality. The SCART cable carries both audio and

video. You can select Composite Video or RGB

video for that SCART connector’s video output

signal.

10 REAR PANEL CONNECTIONS

Setup and Connections

I Ensure that the power switch of this unit and

other equipment to be connected is set to off

before commencing connection.

I Read through the instructions before

connecting other equipment.

I Ensure that you observe the color coding

I Do not block ventilation holes of any of the

equipment and arrange them so that air can

circulate freely.

when connecting audio and video cables.

Connecting to a stereo TV and stereo or Pro Logic Amplifier/Receiver

To S-Video input connector

To stereo audio input connector (Red/White) on

the TV or Stereo/Pro Logic Amplifier/Receiver

To Video input

connector (Yellow)

To power outlet

(AC 230V/50 Hz)

DVD

Notes:

I When the audio signal is to be fed to a stereo

or Pro Logic amplifier/decoder or receiver

rather than to the TV, connect the Audio Out

jacks to any normal audio input on your

amplifier/decoder/receiver. The DVD will

”downmix” Dolby Digital recordings to Pro

Logic, available on these connectors, all ana-

log surround or stereo signals will be fed to

them directly.

You can also select the audio and video sig-

nals of all your video devices with your AV

Receiver/Amplifier. For more information see

”Note” on next page.

I The Video output (yellow) combines the com-

plete video signal (composite) and sends it to

the TV (or to the AV Receiver) by one line

only. Use the Video output, when your TV set

is equipped with a Video input jack only.

for improved picture clarity. Never connect

both outputs, Video and S-Video, to your TV

or AV Receiver, only one of them.

I Most European TV´s are equipped with SCART

connectors rather than with a normal video

input (yellow cinch). In that case the SCART

connection should be used, providing the

audio signal too. Separate analog audio con-

nections to TV are needed only if your TV is

connected to the video or S-video output.

I The S (separate) video output connector sepa-

rates the color (C) and luminance (Y) signals

before transmitting them to the TV set in

order to achieve a sharper picture. Use the

S-video cable when connecting the player to

a TV equipped with an S-video input

SETUP AND CONNECTIONS 11

Setup and Connections

Connecting to a receiver/amplifier with Dolby Digital (AC-3) or DTS (Digital Theater Systems) decoder

When DVD´s encoded in Dolby Digital or DTS are

played, the Dolby Digital or DTS bitstream is out-

put from the player’s OPTICAL or COAXIAL digi-

tal audio output. When the player is connected

to a Dolby Digital or DTS decoder, you can enjoy

theater-quality audio in your home. An optical

digital audio cable or coaxial audio cable (both

optional) is required for these connections, as

shown below. Only one connection is needed,

not both at the same time.

I Note: With multiple video sources, your

Audio/Video device can be used for selecting

the video signal and routing it to the TV.

Connect the video or S-video output of the

DVD player (whatever is provided with your

device) to the video or S-video input on your

device and the video/S-video output of this

device to your TV. For more details, see the

manual of your Audio/Video amplifier/receiver.

I Note for Analog Audio: The connection

from Audio Out to the TV is optional only.

Normally you´ll hear the sound from your

AV-system´s speakers, so the TV volume

should be completely turned down. If you

plan to use your DVD player also without

having to turn on your complete system, this

connection must exist, then you can turn up

the TV´s volume as needed.

To S-Video input connector

To audio input connector

(Red/White, optional only, see Note above)

To Video input

connector (Yellow)

To power outlet

(AC 230V/50 Hz)

DVD

To coaxial audio input connector

To optical audio input connector

Dolby Digital or DTS decoder

Front Speaker (Left/Right)

Center Speaker

Surround Speaker (Left/Right)

Subwoofer

12 SETUP AND CONNECTIONS

Setup and Connections

Connecting to a TV or monitor with SCART or Component connectors

Important Notes on SCART and RGB

format:

I Your DVD is equipped with a SCART connec-

tor for direct connection to the TV.

Note that with RGB video the color intensity

cannot be adjusted with most TVs.

Component Video Connection

If the video display has component video inputs,

connect the Component Video Outputs on the

DVD to the corresponding input jacks on your

television. If you are using a progressive scan

television or projector, you must also change the

Scan Type in the DVD player's Video Set-Up

Menu from ”Interlaced” to ”Progressive”.

I When the RGB video signal is used, DVD´s

recorded with the NTSC format (with regional

code 0 or 2) can be viewed even on non-

NTSC compatible TVs.

I The SCART connector provides the video

signal as well as audio (stereo L/R) signals.

I The SCART connector for the TV provides the

composite video signal or the direct RGB sig-

nal, delivering the best video performance

possible, selectable in the Setup menu. To

view RGB video on your TV, the RGB compati-

ble SCART connector on the TV must be used

and the DVD´s TV SCART connector must be

set to ”RGB”.

TV or Monitor

To SCART connector

To power outlet

(AC 230V/50 Hz)

To Component

connectors

DVD

To optical or coaxial

input of Dolby Digital/

DTS Decoder/

Amplifier/Receiver

SETUP AND CONNECTIONS 13

Remote Control

Battery installation

Remote control operation range

Insert the batteries supplied while observing the

correct (+) and (–) polarities.

Point the remote control unit from no more than

about 7 m from the remote control sensor and

within about 60 degrees of the front of the unit.

Service life of batteries

I The batteries normally last for about one year,

although this depends on how often, and for

what operations, the remote control is used.

I The operating distance may vary according to

I If the remote control unit fails to work even

when it is operated near the player, replace

the batteries.

the brightness of the room.

Notes:

I Do not point bright lights at the remote

control sensor.

I Use size “AA” batteries.

I Do not place objects between the remote

control unit and the remote control sensor.

Notes:

I Do not attempt to recharge, short-circuit,

disassemble, heat or throw the batteries into

fire.

I Do not use this remote control unit while

simultaneously operating the remote control

unit of any other equipment.

I Do not drop, step on or otherwise impact the

remote control unit. This may damage the

parts or lead to malfunction.

I Do not mix old and new batteries.

I Wipe away any leakage inside the remote

control unit, and install new batteries.

I If leakage should come into contact with

parts of your body, wash it off thoroughly

with water.

I Batteries contain chemical substances and we

recommend that you dispose of them properly

and in compliance with any local regulations.

Do not simply throw them away but return to

your dealer or special battery disposal centers.

14 REMOTE CONTROL

Digital Audio Connections

Audio output from the unit’s

optical/coaxial digital audio

output connector

For your reference:

I Dolby Digital (AC-3) is a digital sound com-

pression technique developed by the Dolby

Laboratories Licensing Corporation,

supporting 5.1-channel surround sound, as

well as stereo (2-channel) sound, this tech-

nique enables a large quantity of sound data

to be efficiently recorded on a disc.

Caution for the optical/coaxial

digital audio outputs:

I When connecting an amplifier (with an opti-

cal/coaxial digital input ) which does not con-

tain a Dolby Digital (AC-3) or DTS decoder, be

sure to select ”PCM” as initial setting in the

”Digital Output” menu (see also page 18).

Otherwise, any attempt to play a DVD may

cause such a high level of noise that it may

be harmful to your ears and damage your

speakers.

Disc: Sound recording Optical/Coaxial digital

format:

audio output

DVD Dolby Digital

(AC-3)

Dolby Digital bitstream

(2-5.1 ch) or PCM

(2 ch, 48 kHz/16bit)*

I Linear PCM is a signal recording format used

in CDs. While CDs are recorded in

44.1kHz/16 bit, DVDs are recorded in

48 kHz/16 bit up to 96 kHz /24 bit.

Linear PCM

(48/96 kHz

16/20/24bit)

Linear PCM (2 ch)

(48/96 kHz

16/20/24bit)

I CD´s can be played as they would normally be

played.

I If you have a Dolby Pro Logic Surround

decoder connected to the DVD’s analog

AUDIO OUT connectors, thanks to the

”Downmix” function of the DVD you will

obtain the full benefit of Pro Logic from the

same DVD movies that provide full 5.1-chan-

nel Dolby Digital soundtracks, as well as from

titles encoded with Dolby Surround.

DTS

DTS Bitstream or no

output *

Note:

I Some first generation DTS decoders which do

not support DVD-DTS interface may not work

properly with the DVD/CD player.

MPEG (2.0)

MPEG bitstream (2ch)

or linear PCM

(2 ch, 48kHz)

Notes when connecting the

optical digital audio cable

(optional)

I Remove the dust protection cap from the

optical digital audio output and connect the

cable firmly so that the configurations of both

the cable and the connector match.

VCD MPEG-1 or

CD-DA

Linear PCM*

I The DVD is designed to digitally output

96 kHz-PCM audio with a 96 kHz sampling

rate. However, some 96 kHz DVD's may

include copy protection codes that do not

permit digital output. For full 96 kHz fidelity

from these discs, use the analog outputs of

the DVD.

Linear PCM

Linear PCM (44.1 kHz

sampling)

* Digital Format must be selected as

“ORIGINAL“ or ”PCM” respectively in Menu

I Keep the dust protection cap and always

reattach the cap when not using the connec-

tor.

IMPORTANT: If your surround processor/D/A

converter does not support 96 kHz PCM audio,

you must use the DVD analog outputs for full 96

kHz fidelity with these discs.

Dolby Digital and DTS

Both Dolby Digital and DTS are audio formats

used to record 5.1-channel audio signals onto

the digital track of film. Both of these formats

provide six separate channels: left, right, center,

left rear, right rear, and common subwoofer.

The latest 6.1-formats, Dolby Digital EX and DTS

ES, even one (or two) additional "Surround

Back" channel for a center between the rears.

Remember, that Dolby Digital or DTS will only

play 5.1-channel sound if you’ve connected the

optical or coaxial output of the DVD player to a

DTS or Dolby Digital receiver or decoder and if

the disc was recorded in the Dolby Digital or DTS

format.

Dolby Digital is a trademark of Dolby Laboratories

Licensing Corporation.

Manufactured under license from Dolby

Laboratories. ”Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

Confidential Unpublished Works.1992-1997

DTS is a registered trademark of Digital Theater

Systems.

DIGITAL AUDIO CONNECTIONS 15

Playback Basics

Freeze Frame and Frame Advance

(with DVD only)

1. Press PAUSE when a DVD is playing to freeze

the picture.

Basic Play

Preparation

1. Switch the TV ON and select its video input

connected to the DVD.

Disc Playback Features

Skipping tracks or titles/chapters

To move forward or backward through the tracks

on a CD or the titles or chapters on a DVD, press

SKIP on the front panel or PREVIOUS/NEXT on

the remote.

2. Each time you press one of the STEP (FWD or

REV) buttons, the picture advances one frame

in the selected direction.

2. Press POWER to turn on the unit, the DVD

harman/kardon logo should appear now on

the screen. If that logo appears distorted on

the screen or without any color, change the

appropriate settings at the Video Setting

Submenu according to your TV set and to the

connection used between the DVD and your

TV.

Fast Motion Playback/Fast Search

1. To move forward or backward through the

DVD or CD disc being played at fast speed,

press SEARCH on the remote. Once one of

these buttons is pressed, the fast search will

continue until PLAY is pressed.

3. Press PLAY to resume normal playback.

Slow Motion Playback (with DVD only)

1. When a DVD disc is in pause or freeze frame

mode, you may move slowly forward or back-

ward through the program being played at

one of four speeds by pressing the Play

Buttons on the remote. Each press of the

buttons will move to the next speed, indicated

by a number of arrow indicators on the right

top of the screen.

3. When you see no video at all, not even the

harman/kardon logo, check the setting of the

video input used on your TV (most SCART

inputs on TVs can be configured in the TV´s

menu). When you don´t succeed, connect your

TV with different cables to the DVD, e.g. via

Composite (yellow jacks) or S-Video cables,

rather than per SCART to view the setup

menus until all appropriate ”Video menu”

settings are made properly.

There are four fast-play speeds. Each press of

the SEARCH Buttons will cycle to the next speed

in the following order: 2x, 4x, 16x, 100x, indicat-

ed by a number of arrow indicators on the right

top of the screen.

2. Press PLAY at any time to resume normal

playback.

2. Press PLAY to resume normal playback.

Note that there will be no audio playback during

slow-forward or -reverse play of DVD discs. This

is normal for DVD, as A/V receivers and surround

processors cannot process the digital audio

streams during slow modes. Slow play is not

available for CD.

Note that there will be no audio playback during

fast-forward or -reverse play of DVD discs. This is

normal for DVD, as A/V receivers and surround

processors cannot process the digital audio

streams during fast-play modes; audio will be

heard during fast-play of conventional CD’s.

4. Switch on your A/V system’s power, if the

player has been connected to such a system.

5. Press OPEN/CLOSE to open the disc tray.

6. Place a disc on the disc tray.

Notes: Playback features may not be available

during the opening credits of a movie. This is

intended by the disc author and is not a failure

of the DVD.

Hold the disc without touching either of its

surfaces, position it with the side you wish to

play facing down, align it with the guides, and

place it in its proper position.

Playback of a DVD with 96 kHz/24-bit audio

requires the use of circuitry normally used for

other features. Accordingly, Slow Play Reverse

and Step Advance features are not available

with these discs.

I 3" (8 cm) discs or 5" (12 cm) discs can be

used.

7. Press PLAY. The disc tray is automatically

closed and play begins.

I When the disc tray is closed by pressing

OPEN/CLOSE, play will start automatically.

Depending on the structure of a VCD disc, the

functions Slow Reverse and Step Reverse may be

prohibited or have no function and Fast Playback

(Search) may not function.

I With most DVD’s, a Disc Menu appears on

the screen. Select specific menu item by using

ARROW buttons on the remote, then press

ENTER.

16 PLAYBACK BASICS

System Setup

(A) Main Menu Line

Display Language: Sets the language in which

the OSD menus are shown on your screen.

System Defaults

(B) Submenus

The final step of the installation is to establish

the system’s defaults. It is helpful to take a few

minutes to familiarize yourself with these set-

tings, as they may require change before the first

use and later from time to time.

Preferred Subtitle Language: Defines your

preferred subtitle language. Every time a disc will

be played that contains this subtitle language, it

will be shown automatically. If you do not find

your preferred language in the list of options, you

can select your preferred language by typing a 4-

digit code found in the code list on page 20. You

can also set the preferred subtitle language to

OFF. In that case no subtitles will be shown.

(D) Upper Menu Line with Brief Explanation

(E) Lower Menu Line with Possible Options

General Functionality of the OSD Menu

The complete setup and control of the DVD 506

takes place in an advanced user-guided On

Screen Display (OSD) menu system. The OSD can

be activated by pressing the OSD button on the

remote control. Pressing this button again de-

activates the OSD.

Set Up Menu

The first step in checking or changing the system

defaults is to access the Setup Menu. First, make

certain that the DVD is properly connected to a

video display, and that power is connected. For

this process, however, you do not need to load

any discs into the unit.

Panel Time-Out: Sets the time-out interval for

the Front Panel Information Display. After the

selected time, the display will dim completely.

The main menu consists of a PLAYER Menu and a

SET-UP Menu. The PLAYER Menu will show all

information and options available for the disc

currently playing. The SET-UP Menu will help you

configure all audio and video settings which are

normally only made once.

Status Bar Time-Out: Sets the time-out interval

for the Status Bar, after which the Status Bar will

disappear from the screen.

During STOP, PAUSE or PLAY mode, if you press

OSD on the remote, the Set Up Menu appears on

the screen.

Parental Control: Defines a password used to

control viewing of restricted programs. The

default password is 8888. After pressing the

default password, either the parental control set-

ting can be chosen, or a new password. The five

standard US rating symbols are ”G” (General,

level 2), ”PG” (Parental Guidance, level 4),

”PG13” (Parental Guidance and 13 years old,

level 4), ”R” (Restricted, level 6) and ”NC 17”

(from 17 years old, level 7). The DVD will accom-

modate a total of eight rating steps, as set by the

DVD creators. These additional steps allow for

more critical control of program playback for all

audiences. Level 8: All DVDs can be played. Levels

7 to 2: DVDs for general audiences/ children can

be played. Level 1: DVDs for children can be

played; DVDs for adults/general audiences are

prohibited. Follow the explanations on the screen

to set a new password.

This Main Menu and all menus in the following

section may look different, listing the settings

with different languages, depending on the set-

tings made previously. With the factory default

setting all languages are set to ”English”, that´s

why with all menus the English version is shown

in the manual.

Each Main Menu contains Submenus. These sub-

menus are shown as icons on the left side of the

menu. They can be highlighted by a white square

around the icon by moving the cursor with the

ARROW buttons. Icons can be activated by press-

ing ENTER as soon as an icon is highlighted.

When ENTER has been pressed, the color of the

icon will change to dark blue and you will see

that the Actual Settings of this submenu will

appear on the right side of the menu.

In the SET-UP Menu you will find submenus for

making or changing all settings and adjustments

for both Audio and Video handling of your DVD

506.

To access the SET-UP Menu, press the OSD but-

ton, and move the cursor to the right until SET-UP

is highlighted. Press ENTER to activate the SYS-

TEM Settings:

Although each Menu has various Submenus and

Settings, navigating through menus, submenus

and settings goes the same way. All submenus,

settings and options can be accessed with the

help of the ARROW (KLN M ) and ENTER

buttons on the remote control.

System Settings

To change a setting, simply move the cursor to

the setting you wish to change. This setting will

be highlighted in light blue, and a brief explana-

tion will appear in the Upper Menu Line on the

bottom of your screen. Once the setting is high-

lighted, pressing the ENTER button on the remote

control will show the available options for this

setting on the Lower Menu Line on the bottom of

PBC Support: Activates PBC (Play Back Control)

Support for VCD discs.

Screen Save: Activates a Screen Saver to pre-

vent an image to “burn” into a video display

device. If you connect the DVD 506 to a LCD or

plasma screen or video projector, we recommend

you activate the screen saver at all times.

your screen. Move the ARROW

to the requested option for this setting. Press

ENTER to activate the new setting.

buttons

Show Angle Icon: Determines whether the

Angle Icon will appear on the screen when there

are different angles available on a DVD disc.

The System Setting Submenu contains the

following settings. Follow the explanations in the

Upper Menu Line on the bottom of your screen to

change the settings.

(A)

(C)

(B)

(E)

(D)

SYSTEM SETUP 17

System Setup

Audio Settings

Video Settings

The Audio Setting Submenu contains the follow-

ing settings. Follow the explanations in the

Upper Menu Line on the bottom of your screen

to change the settings.

The Video Setting Submenu contains the follow-

ing settings. Follow the explanations in the

Upper Menu Line on the bottom of your screen

to change the settings.

Preferred Audio Language: Defines your pre-

ferred audio language. Every time a disc is

Aspect Ratio: This step selects the TV aspect

ratio, conventional screen shape (4:3) or

widescreen (16:9), according to your TV.

played that contains this audio language, it will

be activated automatically. If you do not find

your preferred language in the list of options,

you can select your preferred language by typing

a 4-digit code found in the code list on page 20.

TV Standard: Sets the output video format i.e.

NTSC, PAL or SECAM, of the DVD player. If you

have a multi standard TV, we recommend the

AUTO setting for optimal picture quality.

Digital Output: If your system includes 5.1

digital audio surround decoding (Dolby Digital

and/or DTS), select ORIGINAL as the digital out-

put. In that case all audio signals will be output

with their original format. If your system only

includes stereo and/or Dolby Pro Logic, select

PCM. Then all audio signals will be output in

PCM format only (DTS will output no signal).

Scan Type: Sets the video output to Interlace or

Progressive. Before changing the setting to

Progressive, make sure that your video display is

capable of handling progressive scan signals. As

soon as you select progressive scan the scan

type, the Video Output will automatically change

to Component.

Video Output: Sets the video output type to

Scart or Component. Scart will be used for most

TV’s. Component will be used for most LCD,

Plasma and projectors.

PCM Limit: The DVD 506 is compatible with

both 48 kHz and 96 kHz sampling, but some

early A/V receivers and surround processors are

not. If your A/V receiver or surround processor is

NOT capable of handling 96 kHz signals, select

the 48 kHz option. If your A/V receiver or sur-

round processor IS capable of handling 96 kHz

signals, select the 96 kHz option to achieve the

greatest audio fidelity available. If NONE is

selected, the complete signal will be passed

through to your A/V Receiver or surround

processor.

Scart Output: Selects which kind of video out-

put signals will be routed over the scart. RGB

will be used for most TV’s.

Dynamic Range: This setting enables Dolby

Digital recordings to be played back with full

dialogue intelligibility while reducing peak levels.

This smooth level compression prevents abrupt

loud transitions from disturbing others without

reducing the impact of the digital source percep-

tibly.

18 SYSTEM SETUP

Player Menu

Using the Status Bar Menu

PLAYER Menu

Information Displays

The on-screen Status Bar contains many playback

features. To see the Status Banner Menu, press

STATUS on the remote control while a disc is

playing. Use the ARROW buttons on the remote

to move through the different features in the

Status Bar. When a feature is highlighted, press

ENTER on the remote to select it and to change it

with the help of the options listed on the screen.

Press ENTER to activate the change.

Title: The number shown indicates the number of

the title that is currently playing.

Once all the settings have been made, you are

ready to enjoy your DVD 506. Once you have

inserted a disc into the drawer you can explore

the other Main Menu, that is the PLAYER Menu.

This menu hosts all playback and program fea-

tures, as well as all disc information. As you will

see, the lay out of this menu is comparable with

the lay out of the SET-UP Menu. The functionality

is the same too. The Submenus are shown on the

left side of the screen, with INFO and PROGRAM

activated by default. As in the SET-UP Menu, set-

tings can be highlighted with the ARROW but-

tons and selected with the ENTER button on the

remote control. Options for the settings are

shown in the Lower Menu Line on the bottom of

the screen.

In DVD and MP3 mode, activating the DISC INFO

Submenu will show information about the player

and the disc currently playing. The first lines will

show Disc Name and Disc ID. Below you can

compare the Aspect Ratio, Video Standard and

Scan Type available on the disc with the actual

settings of your player.

Chapter: The number shown indicates the num-

ber of the chapter that is currently playing on a

disc.

Time: This item displays the time in DVD mode.

Press the ARROW step by step to activate:

Title Elapsed, Title Remaining, Chapter Elapsed,

Chapter Remaining. Depending on the choice

made, the bar will show a graphic view on where

the disc is currently playing.

In the lower part of the screen the Audio

Resolution and Audio Format are shown, and at

the bottom you will see a graphical presentation

of the Video Bit Rate and the Audio Bit Rate of

the disc currently playing.

Programmed Play

In STOP mode, the Disc List can be used to create

your own program list for both DVD, CD, MP3,

WMA or JPEG discs. Move the cursor to the right

of the menu, into the Disc List. Move the cursor

up or down to the first track you would like to

program and press ENTER. The cursor will move

to the options in the Lower Menu Line. You can

either add the selected track (or picture) to the

playlist or give it the number you would like it to

have in your playlist, or clear the track from the

list. Move the cursor down to the next track you

would like to program and continue until your

playlist is complete. Once completed, move the

cursor up to the Playlist setting. Select

Disc: Shows the name of the disc as it has been

given by the artist

Audio: Shows the audio track that is currently

playing. Options are shown on both Menu Lines

on the bottom of the screen.

Playlist: Sets the order in which the current disc

is played back.

Repeat: Sets the repeat mode.

Random: Activates Random Playback when pos-

sible.

Programmed order from the options and press

PLAY to start the playback.

Subtitle: Shows the subtitle of the disc currently

playing.

In the PLAYER Menu, the chapter, track or picture

currently playing will be marked with an arrow

symbol in front of the Chapter (DVD), Track (CD,

MP3, WMA) or Picture (JPEG). Chapters, tracks

and pictures can be selected from this list at any

time by moving the cursor to the requested chap-

ter or track and pressing ENTER to confirm.

The top part of this screen can be de-activated to

show the complete Track list on the screen. To

de-activate, move the cursor to the INFO

Submenu of the left side of the screen. Press

ENTER until the icon is highlighted in light blue

and the full Track list is visible on the screen. In

the same way the Disc list can be removed from

the screen by de-activating the PROGRAM

Submenu.

If you have a disc that contains both MP3 files

and JPEG images, you can choose to run these

simultaneously, mixing the MP3 audio with your

own images. The time interval can be chosen in

the Picture Setting.

PLAYER MENU 19

DVD Language Codes

The availability of specific languages for the main audio track or subtitles is dependent on the choices made by a disc’s producer. You should always

consult the disc’s jacket for information on languages for any disc. In the case of some languages, you may be required to enter a code from the list below to

access that language.

Language

Code

Language

Code

Language

Code

Abkhazian

Afar

Afrikaans

Albanian

Ameharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6673

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

Hungarian

Icelandic

Indonesian

Interlingua

Interlingue

Iunpiak

7285

7383

7378

7365

7369

7375

7165

7384

7465

7487

7578

7583

7575

8287

7589

8278

7579

7585

7679

7665

7686

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7967

7982

7977

8065

8083

7065

8076

8084

8185

8277

8279

Russian

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Servo-Groatian

Sesotho

Setswana

Shona

8285

8377

8371

8365

7168

8382

8372

8384

8478

8378

8368

8373

8383

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8483

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Irish

Italian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Korean

Kurdish

Laothian

Latin

Latvian, Lettish

Lingala

Lithuanian

Macedonian

Malagsy

Malay

Malayalam

Maltese

Maori

Marathi

Moldavian

Mongolian

Naru

Nepali

Norwegian

Occitan

Oriya

Oromo (Afan)

Panjabi

Pashto, Pushto

Persian

Polish

Portuguese

Quechua

Rhaero-Romance

Romanian

Sindhi

Basque

Singhalese

Siswati

Slovak

Slovenian

Somali

Spanish

Sundanese

Swahili

Swedish

Tagalog

Tajik

Bengali; Bangla

Bhutani

Bihari

Bislama

Breton

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Danish

Dutch

English

Esperanto

Estonian

Faroese

Fiji

Finnish

French

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish

Turkmen

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Frisian

Galician

Georgian

German

Greek

Greenlandic

Guarani

Gujarati

Hausa

Yiddish

Yoruba

Zulu

Hebrew

Hindi

20 DVD LANGUAGE CODES

Technical Specifications

Applicable Disc:

Disc formats: 5 inch (12 cm) or 3 inch (8 cm) DVD Video, Standard conforming DVD+RW, DVD+R, DVD-R and

DVD-RW, VCD, CD, CD-R, MP3, WMA, JPEG or CD-RW discs,

Regio code: DVD Video disc with Code 2 or 0 only.

DVD-Layers: Single Side/Single Layer, Single Side/Dual Layer, Dual Side/Single Layer, Dual Side/Dual Layer

Audio formats: Linear PCM, MPEG, MLP/CPPM, Dolby Digital or DTS

Video Signal System:

Composite Video Output:

S Video Output:

PAL/NTSC

1 V p-p/75 Ohms, sync negative polarity

Y/Luminance: 1 V p-p/75 Ohms, sync negative polarity

C/Chrominance: 0.286 V p-p

Component Video Output:

Y: 1Vp-p/75 Ohms, sync negative polarity

Cr: 0.7Vp-p/75 Ohms

Cb: 0.7Vp-p/75 Ohms

2 Vrms max

Analog Audio Output:

Frequency Response:

DVD (Linear PCM):

2 Hz - 22 kHz +0/-0.5 dB (48 kHz sampling)

2 Hz - 44 kHz +0/-0.5 dB (96 kHz sampling)

CD:

2 Hz - 20 kHz +0/-0.5 dB

Signal/Noise Ratio (SNR):

Dynamic Range:

105 dB (A-weighted)

DVD: 100 dB (18 Bit) / 105 dB (20 Bit)

CD/DVD: 96 dB (16 Bit)

THD/1kHz:

DVD/CD: 0.003 %

Wow & Flutter:

AC Power:

Below Measurable Limits

110 - 240 V/ 50 - 60 Hz

2 Watts (On)/20 Watts (Max)

440 x 49 x 330 mm

3.3 Kg

Power Consumption:

Dimensions (WxHxD):

Weight:

Depth measurement includes knobs and connectors.

Height measurement includes feet and chassis.

All specifications subject to change without notice.

Harman Kardon and Power for the digital revolution are trademarks of Harman Kardon, Inc.

Manufactured under license from Dolby Laboratories. Dolby, AC-3, ProLogic and the double-D symbol are trademarks of

Dolby Laboratories. Confidential.

DTS is a trade mark of Digital Theater Systems, Inc.

Microsoft, Windows and WMA are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights

owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and

is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or diassembly is

prohibited.

TECHNICAL SPECIFICATIONS 21

250 Crossways Park Drive, Woodbury, New York 11797

www.harmankardon.com

Harman Consumer International:

2, Route de Tours, 72500 Château-du-Loir, France

Partnumber: 312-AB506000-000

Grizzly Saw G1016 User Manual
Haier Electric Heater FCD JTSA50 III User Manual
Hasbro Games 18636 Anst User Manual
Heat Glo LifeStyle Door CERONA 36 User Manual
Heat Glo LifeStyle Indoor Fireplace AT GRAND User Manual
Honeywell Dehumidifier H8908A B User Manual
Hotpoint Dishwasher HDA2000FBB User Manual
HP Hewlett Packard Personal Computer 5 xxx User Manual
HP Hewlett Packard Switch HP 3588A User Manual
Hunter Fan Outdoor Ceiling Fan 42650 02 User Manual