Harbor Freight Tools High Chair 45342 User Manual

PNEUMATIC ROLLER SEAT  
45342  
ASSEMBLY AND OPERATING INSTRUCTIONS  
®
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Copyright © 2001 by Harbor Freight Tools®. All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
For technical questions and replacement parts, please call 1-800-444-3353.  
Revised Cover 12/04  
 
Warning:The warnings, cautions, and instructions discussed in this instruc-  
tion manual cannot cover all possible conditions and situations that may oc-  
cur. It must be understood by the operator that common sense and caution  
are factors which cannot be built into this product, but must be supplied by  
the operator.  
Unpacking  
When unpacking, check to make sure all parts listed on Page 4 are included. If  
any parts are missing or broken, please call Harbor Freight Tools at the number  
on the cover of this manual.  
Assembly  
You will need a hammer and a crescent wrench to assemble this product.  
1. Insert top of Lifting Pole [D] into the Hub [C] that has already been attached  
to the Seat Cushion [A].  
2. Now insert Seat Cushion and Lifting Pole assembly into the top of the Tool  
Tray [E].  
3. Check and tighten all fasteners as needed.  
Operation/Maintenance  
With its convenient tool tray, comfortable padded seat, and non-marking wheels,  
the Pneumatic Roller Seat is essential for the multi-tasking craftperson.  
To lower seat, sit on the Stool and pull up on the handle until you have lowered  
the seat to the desired height (See Diagram I on Page 4). To raise seat, stand  
next to the Stool and pull up on the handle. Release handle when seat has risen  
to the desired height.  
Do not let children play on or around the Roller Seat.  
Do not stand on Roller Seat or use the tool tray to carry large amounts of weight.  
Do not attempt to exceed the Roller Seat’s 300 lb capacity.  
Once assembled, do not attempt to take this product apart.  
Do not expose to heat. Parts of this product are under pressure.  
REV 08/03  
SKU 45342  
Page 3  
Parts List  
Assembly Drawing  
NO. DESCRIPTION  
QTY.  
1
A
B
C
D
E
F
G
H
I
Seat Cushion  
Supporting Plate  
Hub  
Lifting Pole  
Tool Tray  
2-1/2” Wheel  
Handle  
Truss Head Bolt M6x20  
Cap Nut  
1
1
1
1
5
1
4
5
J
K
Lock Washer 10  
Rivet 3x18  
5
1
Diagram I, Lowering Seat  
NOTE: Some parts are listed and shown for illustration purposes only and are not available  
individually as replacement parts.  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM  
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER  
NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO  
THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE  
PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE  
PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY  
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN  
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER  
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE  
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS  
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.  
SKU 45342  
Page 4  

Graco Inc Paint Sprayer 232900 User Manual
Hamilton Beach Slow Cooker 33134C User Manual
HANNspree Flat Panel Television F621 15U1 000 User Manual
Heath Zenith Work Light SH 9250 BZ User Manual
Honeywell Barcode Reader 9520 40 User Manual
Honeywell Weather Radio TS13F User Manual
HP Hewlett Packard Crib Toy 8510w User Manual
HP Hewlett Packard Laptop 355451 001 User Manual
HP Hewlett Packard Personal Computer 3130 User Manual
Huffy Board Games 89780 User Manual