Halo Lighting System Indoor Furnishings L994 User Manual

®
HALO  
L942  
Flex Joiner  
L943  
Straight/L Connector  
To connect two track sections at any angle up  
to 90,° in either plane or wall to ceiling or  
pitched ceiling applications.  
To connect two track sections end-to-end or at  
a 90° angle. May be used as feed point.  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L945L  
Left T Connector  
L945R  
Right T Connector  
“T” connector for joining three trac sections  
with left hand polarity. May be used as feed  
point.  
“T” connector for joining three trac sections  
with right hand polarity. May be used as feed  
point.  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L946  
X Connector  
L947  
Conduit Connector  
To connect four track section into a cross  
configuration. May be used for feed point.  
A live end connector for use with surface  
conduit. Designed to accept standard 1/2”  
conduit fitting (not included). May be used for  
feed point.  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L951  
Wire Way Cover for  
Pendant Assembly Kit  
L949  
Mini Joiner  
To join two straight track sections end-to-end.  
Not a feed point.  
For track to be wired through stem (one for  
each live end used). Shown with end feed and  
pendant stem kitorder separately  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L983  
T-Bar Attachment Clip  
L989  
Conduit Continuation Kit  
Allows track to be attached to inverted tee  
ceiling. Order as follows: 2 kits for 2’ Trac; 2  
kits for 4’ Trac; 3 kits for 8’ Trac; and 4 kits for  
12’ Trac.  
Includes one left and one right feed. To  
continue  
a run around obstructions with 1/2” trade size  
surface conduit.  
L986  
T-Bar Attachment Clip  
Finish: White (P), Black (MB)  
For mounting track on suspended ceilings with  
mini-grid (9/16" wide) system.  
L992  
Pendant Kit Assembly  
L929  
Floating Canopy and  
Connector  
To suspend track from ceiling. Order as  
follows: 2 kits for 2’ Trac; 2 kits for 4’ Trac; 3  
kits for 8’ Trac; and 4 kits for 12’ Trac. Includes  
one 18” threaded steel stem, canopy and  
mounting hardware.  
Can be connected anywhere along length of  
Trac. Comes with canopy cover, connector,  
dead-end and mounting hardware.  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L48  
48” Steel Stem  
For additional length of stem for L992. Can be  
field cut and threaded.  
L994  
45° Pendant Adapter  
For installing pendant mounted Power-Trac on  
sloped ceiling. For use with L992 and L993.  
DE641 Dead End  
Replacement Dead Ends for Two Circuit Track  
(6 included)  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
COOPER LIGHTING  
313  
 

Graco Inc Baby Playpen ISPP072AA 07 0632 User Manual
Grindmaster Coffeemaker AM 344 04 User Manual
Grizzly Saw G0524 User Manual
Grizzly Tool Storage T26900 User Manual
Haier Washer HWF5300AW User Manual
Hotpoint Freezer HS2322L User Manual
HP Hewlett Packard Camcorder V5040u User Manual
HP Hewlett Packard Photo Printer 7550 User Manual
Humminbird SONAR ICE 35 User Manual
Impex Home Gym CB 339 User Manual