Upright Frost Free Freezer
Congélateur Vertical
Congelador Vertical
User Manual Model
HUF138PA • HUF168PA • HUF205PA
Guide de l’Utilisateur
HUF138PA • HUF168PA • HUF205PA
Manual del Usuario Modelo
HUF138PA • HUF168PA • HUF205PA
•
•
Quality Innovation Style
English
9. Do not use any electrical device or any sharp instrument to defrost
your freezer.
10. Unplug your freezer before cleaning or before making any repairs.
Note: If for any reason this product requires service, we strongly
recommend that a certified technician perform the service.
11. Do not operate your freezer in the presence of explosive fumes.
SAVE THESE
INSTRUCTIONS
DANGER
Risk of child entrapment. Before you throw away your old
refrigerator or freezer, take off the doors. Leave the shelves in
place so that children may not easily climb inside.
Thank you for using our Haier
product. This easy-to-use manual
will guide you in getting the best
Model number
use of your freezer.
Serial number
Remember to record the model and
serial number. They are on a label
in back of the freezer.
Date of purchase
Staple your receipt to your manual. You will need it to obtain
warranty service.
2
English
Table Of Contents
PAGE
Safety Precautions ....................................................................1-2
Unpacking ....................................................................................4
Parts and Features ......................................................................5
Freezer Installation......................................................................6
Electrical Connections ..................................................................7
Operating Your Freezer ........................................................8-11
Normal Operating Sounds ........................................................11
Proper Care and Cleaning ........................................................12
Frost-Free ....................................................................................13
Extended Non-Use and Moving................................................13
Troubleshooting Guide ..............................................................14
Warranty......................................................................................15
3
English
Unpacking
Unpacking
1. Remove all packing materials. This includes the corrugated base and all
adhesive tape holding the accessories inside and outside.
2. Inspect and remove any remaining packaging, tape and printed materials
before turning ON the freezer.
Note: Allow the freezer to stand in an upright position for at least 24 hours
before turning on the power, if the freezer has been tilted for any reason.
Check to make sure that the accessories are present and in good condition. If
you find that they are not in good condition or are missing, please contact our
customer service department for assistance. Our Toll-Free number is
1-877-337-3639.
4
English
Parts And Features
1
2
3
9
4
7
8
6
5
1. Interior Light
2. Cabinet Wire Shelves (quantities
vary per model)
6. Power Indicator Light
7. Locking Plate
8. Lock (not shown)
3. Temperature Control Dial
4. Storage Drawers (quantity varies by
model)
9. Fixed Door Shelves (quantity varies
by model)
5. Temperature Alarm Switch with
Indicator Light
5
English
Freezer Installation
Proper Location
To ensure that your upright freezer works at the maximum efficiency it was
designed for, you should install it in a location where there is proper air
circulation and electrical connections.
• The freezer is designed for freestanding installation only. It should not be
built-in.
• Allow a minimum of 2 inch on each side and above the top of the freezer to
ease installation and allow proper air circulation.
• Be sure to install your freezer on a floor that is strong enough to support the
unit when fully loaded.
6
English
Electrical Connection
Grounding Instructions
For personal safety, this appliance must be properly grounded. In the event of an
electrical short circuit, grounding reduces the risk of electric shock by providing
an escape wire for the electrical current. This appliance is equipped with a cord
containing a grounding wire with a grounding plug. The plug must be inserted
into an outlet that is properly installed and grounded.
• Improper use of the plug may result in the risk of electric shock.
• Do not, under any circumstances, cut or remove the third (grounding) prong
from the power cord.
• Consult a qualified electrician or service center if the grounding instructions are
not completely understood or if in doubt as to whether the appliance has been
properly grounded.
Use of Extension Cords
• Avoid the use of an extension cord because of potential safety haz-
ards under certain conditions. If it is necessary to use an extension
cord, use only a 3-wire extension cord that has a 3-blade grounding
plug and a 3-slot outlet that will accept the plug. The marked rating
of the extension cord must be equal to or greater than the electrical
rating of the appliance.
Power Interruptions
• Occasionally, there may be power interruptions due to thunderstorms
or other causes. Remove the power cord from the AC outlet when a
power outage occurs. When power has been restored, re-plug the
power cord into the AC outlet.
7
English
Operating Your Freezer
Temperature Control Dial (fig. 1)
fig. 1
• The temperature control dial has settings from “1” to “7”
with “1” being the warmest and “7” being the coldest.
7
• Initially, set the temperature control dial at “4”.
• After the freezer has been turned ON for 24 hours, adjust
the temperature control dial to the setting that best suits
your needs.
Temperature
Control Dial
Note: If you unplug or turn OFF the freezer, wait at
least 4 minutes before restarting or plugging it in again.
Temperature Alarm System
When turning ON your freezer, the temperature alarm system switch should be at
the “O” position. Put it in the “-“ position once the freezer has been ON for a
period of 24 hours. The temperature alarm is activated at 15.8˚F. Once
activated, the built-in audible alarm system will signal a warning of high
temperature to you. The alarm will continue to sound until you turn OFF the
temperature alarm switch. A red light will also warn you that the temperature
alarm system has been activated.
Lock and Key (fig. 2)
Your freezer has a lock and key feature to secure the contents of the freezer.
Close the door, push and turn the key to lock. Push and turn the key in the
opposite direction to unlock.
fig. 2
Lock and Key
8
English
Replacing the Light Bulb (fig. 3)
When replacing the light bulb, follow the steps below:
1. Unplug the freezer.
2. Remove the plastic light shade located inside the
freezer by lightly pressing to the left side.
(see fig. 3)
3. Remove the light bulb by turning it
counter-clockwise.
fig. 3
4. Use ONLY appliance light bulb with 25-watts of power.
5. Install a new replacement light bulb by turning it clockwise.
6. Replace the light shade to its original position.
7. Plug in the freezer, to see if you have installed the light bulb correctly.
8. If the light bulb does not turn ON, repeat the steps above.
Freezer Interior Shelves (fig. 4)
The shelves of the freezer were designed with you in mind. Their adjustability in
position allows you to personalize the storage space to your specific needs.
To remove or adjust a full-width, slide-out shelf:
1. Gently tilt the shelf up and slide it towards you until the shelf has been com-
pletely removed. (see fig. 4)
2. To replace the shelf, select the desired setting and gently slide the shelf back
until it rests in the locking position.
Note: All shelves are not adjustable.
fig. 4
9
English
Reversing the Door (fig. 5 & 6)
This freezer is equipped with a reversible door for left/right opening. If you prefer
to change the direction of door opening, follow the steps below:
Note: The freezer comes with the door hinged to the right.
Shim
Door Pin
washer
fig. 5
fig. 6
1. Fix the freezer door in place with strong adhesive tape.
2. Dismantle the hinge box cover on the top of the freezer door with a Phillips
screwdriver and remove the 2 screws from the hinge. Take out the hinge by
pulling up vertically. Put these aside. (see fig. 5)
3. Remove the adhesive tape on the freezer door, lift and take the door
down.Carefully put it aside.
4. Remove the door pin from the bracket of the lower hinge by turning it
counter clockwise. Move the pin to the opposite hole and tighten. (see fig. 6)
5. Remove the 4 screws from the lower hinge with a Hexhead screwdriver.
Remove the washer and shim from the right side and install them to the left
side.
6. Align the holes in the lower hinge bracket to the corresponding holes on the
opposite side of the cabinet. Insert and tighten screws.
7. Align the bottom hole on the lower left side of the door with the pin of the
lower hinge and slide into place.
NOTE: Remove white hole plugs from left/right top hinge holes and replace
in opposite side.
8. Align the pin of the top hinge with the top hole on the left side of the door
and push in place. Replace the screws in the upper hinge bracket but do not
tighten all the way.
9. Align the door from top to bottom and tighten the 2 screws on the top hinge.
10. Snap on the hinge box cover.
11. Screw the hinge box cover using a phillips screw driver.
10
English
Installing the Handle (fig. 7 & 8)
1. Use a flathead screwdriver to gently remove the plastic screw hole covers from
the handle and the plastic hole plugs from the door.
2. Remove the door handle by unscrewing the upper and lower screws with a
Phillips screwdriver. (see fig. 7)
3. Install the handle on the right side of the door with the screws previously
removed.
4. Replace the plastic screw hole covers onto the door handle.
5. Replace the plastic door hole plugs on the side of the previously removed door
handle. (see fig. 8)
fig. 7
fig. 8
Door handle
Door handle plugs
Normal Operating Sounds You May Hear
• The fan circulating air inside the interior of the unit maintains the
temperature you have selected.
• Boiling water, gurgling sounds or slight vibrations are the result of the
refrigerant circulating through the cooling coils.
• Sizzling or popping sounds result from frost melting during the
automatic defrost cycle and dripping onto the defrost heater.
• The sound of dripping water occurs as ice melts from the evaporator
and flows into the drip pan during the defrost cycle.
• Cracking or popping sounds are caused by the expansion and/or
contraction of the cooling coils during the defrost cycle.
• Both the defrost timer and the thermostat controls will click when they
cycle ON and OFF.
11
English
Proper Care and Cleaning
Cleaning the Exterior
Wipe the exterior of the freezer with a damp cloth and dry thoroughly. Use only
mild soapy water to clean the door gasket. Never use harsh cleansers or scour-
ing pads to clean any part of the freezer.
For efficient operation, dirt and dust should be removed from the rear and bot-
tom of your freezer every 3 months.
• Turn the temperature control dial to "1" and unplug the freezer before cleaning.
• Carefully slide the freezer away from the wall slowly to avoid damaging the
floor.
• Wipe dust from the back of the freezer and the outside of the compressor com-
partment with a clean dry cloth or use a vacuum cleaner with a brush attach-
ment.
Note: Do not attempt to clean inside the compressor compartment.
Cleaning the Interior
Clean the inside of the freezer at least twice a year. Turn the temperature control
dial to "1", unplug the freezer and remove all frozen items from the shelves.
Wash the inside with a solution of warm water and baking soda (2 tablespoons
of baking soda to one quart of water), then rinse and dry thoroughly. Do not use
cleaners such as harsh detergents, scouring powder or sprays containing bleach,
ammonia, or other chemicals that may cause odors inside the freezer or damage
the protective coating on the shelves.
12
English
Frost Free
Your freezer is frost-free. No defrosting is required as it is factory preset to
automatically defrost.
Extended Non-Use and Moving
Extended Non-Use
For long vacations or absences, empty food from the freezer, move the
temperature control dial to the OFF position and disconnect the power cord from
the wall outlet. Clean the freezer and door gaskets according to the Proper Care
and Cleaning section. Prevent odors from forming by placing an open box of
baking soda in the freezer and propping the door open to allow air to circulate
inside.
Moving the Freezer
When transporting the freezer, it should be kept in an upright position. If the
freezer is inadvertently tilted beyond 45 degrees or was laid down horizontally
for any reason (e.g., shipping), the unit must not be operated for at least 24
hours. It must be placed in the upright position for 24 hours to allow the internal
oil and refrigerant to stabilize in the system. Ignoring this precautionary measure
may result in damage to the sealed system and compressor.
13
English
TroubleShooting Guide
Freezer does not operate.
• The unit may not be plugged in.
• The circuit breaker may have tripped or the fuse may have been
blown.
Compressor seems to run continuously or more often than
necessary.
• The door may have been left open or there may be a leak in the
door gasket.
• Frequent door openings allow cold air to escape, thus forcing the
compressor to cycle ON more often.
• Air is not circulating freely around the appliance due to installation in
an area with little or no clearance. Slide the appliance out of the
confined area and vacuum around the rear and bottom to improve
air circulation.
Freezer compartment has an odor.
• Foods with strong odors should be tightly covered.
• Check for spoiled food.
• Interior may require cleaning.
• Keep an open box of baking soda in the freezer to absorb odors and
replace as needed.
Foods are not sufficiently frozen.
• The temperature setting is not high enough.
• The door has been left open for an extended period of time or there
may be a leak in the door gasket.
• Overloaded shelves are preventing effective circulation of cold air.
14
English
Limited Warranty
What is covered and for how
long?
provided and must be paid by the
customer.
This warranty covers all defects in
workmanship or materials for a period
of:
3. Contact your nearest authorized
service center. For the name of the
nearest service center please call
1-877-337-3639
12 months labor
THIS WARRANTY COVERS
APPLIANCES WITHIN THE
CONTINENTAL UNITED STATES,
PUERTO RICO AND CANADA.
IT DOES NOT COVER
12 months parts
5 years sealed system
The warranty commences on the date
the item was purchased and the origi-
nal purchase receipt must be presented
to the authorized service center before
warranty repairs are rendered.
THE FOLLOWING
Damages from improper installation.
Damages in shipping.
Defects other than manufacturing.
Damage from misuse, abuse, accident,
alteration, lack of proper care and
maintenance or incorrect current or
voltage.
Damage from other than household
use.
Damage from service by other than an
authorized dealer or service center.
Decorative trims or replaceable
lightbulbs.
EXCEPTIONS: Commercial or
Rental Use warranty
90 days labor (carry-in only)
90 days parts
No other warranty applies
What is covered.
1. The mechanical and electrical parts,
which serve as a functional, purpose
of this appliance for a period of 12
months. This includes all parts
except finish, and trim.
Transportation and shipping.
Labor (after the initial 12 months).
THIS LIMITED WARRANTY IS GIVEN IN
LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR, INCLUDING THE
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE
2. The components of the sealed sys-
tem e.g. hermetic compressor, con-
denser and evaporator from manu-
facturing defects for a period of 5
years from the date of purchase.
Any damages to such components
caused by mechanical abuse or
improper handling or shipping will
not be covered.
The remedy provided in this warranty is
exclusive and is granted in lieu of all
other remedies.
This warranty does not cover incidental
or consequential damages, so the
above limitations may not apply to
you. Some States do not allow limita-
tions on how long an implied warranty
lasts, so the above limitations may not
apply to you.
What will be done?
1. We will repair or replace, at our dis-
cretion any mechanical or electrical
part which proves to be defective in
normal usage during the warranty
period so specified.
This warranty gives you specific legal
rights, and you may have other rights,
which vary, from state to state.
2. There will be no charge to the
purchaser for parts and labor on
any covered items during the initial
12 month period. Beyond this peri-
od only parts are covered in the
remaining warranty. Labor is not
Haier America
New York, NY 10018
15
IMPORTANT
Do Not Return This Product To The Store
If you have a problem with this product, please contact the
"Haier Customer Satisfaction Center" at 1-877-337-3639.
DATED PROOF OF PURCHASE, MODEL # AND SERIAL #
REQUIRED FOR WARRANTY SERVICE
IMPORTANT
NE PAS RETOURNER CET ARTICLE AU MAGASIN
En cas de problème avec cet article, veuillez contacter le « Centre satisfaction client » de
Haier au 1-877-337-3639.
UNE PREUVE D’ACHAT DATÉE, LE NUMÉRO DU MODÈLE ET LE NUMÉRO DE SÉRIE SONT
OBLIGATOIRES POUR BÉNÉFICIER DE LA COUVERTURE OFFERTE PAR LA GARANTIE.
IMPORTANTE
No Devuelva Este Producto al Establecimiento Compra.
Si tiene problemas con este producto, por favor póngase en contacto con el "Centro Haier
de Atención al Cliente" en el 1-877-337-3639.
PARA EL SERVICIO DE GARANTÍA SE REQUIERE PRUEBA DE COMPRA, FECHADA, No. DE
MODELO Y No. DE SERIE
115V, 60 Hz
Made in USA
Fabriqué en USA
Hecho en USA
Haier America
New York, NY 10018
Printed in USA
Imprimé en USA
Impreso en USA
HUF138.168.205PA - 02
Part# RF-9999-123
Issued: August - 05
|