Haier Flat Panel Television L1509A A User Manual

LCD TV RECEIVER  
USER'S MANUAL  
MODEL:  
L1509A-A, L1709A-A, L1910A-A,  
L2009A-A, L1911W-A  
Please read this manual carefully before  
using your television and keep this manual  
In a good place for future reference.  
 
Safety Notice Items  
Incorrect usage will cause fire or electric shock. To prevent this, please do  
as required when you are installing, using and cleaning this machine. To insure  
your safety and extend the life-span of LCD-TV, please read the following items  
carefully before using:  
l Please read and understand all the instructions before operation;  
l Please keep the book for later use;  
l Please comply with the warning instructions on the machine and in this book  
strictly;  
l Please comply with the instructions provided;  
l Please do not use additional devices that are not recommended by  
manufacturer:  
l Before operation, please make sure that the operating voltage of your unit is  
normal;  
l Do not placethe unit onunstable, dusty andhumid places;  
l Never put theunit in directsunlight or nearheat sources;  
l Allow enough space for proper ventilation;  
l Please keep water away from the LCD-TV . If water comes in contact with the  
LCD-TV, disconnect the power cord from the power source, then wipe the set  
with a dry soft cloth;  
l Do not remove the back cover. If services were need, please refer to qualified  
Personnel  
 
Front Panel Controls  
L1509A-A, L1709A-A, L1910A-A,  
L2009A-A  
2
3
4
5
1
TV/AV MENU VOL- VOL+ CH-  
CH+ POWER  
L1911W-A  
6
7
6
7
Control Panel Function  
1. Power supply switch  
2.TV/AV Select the input signals: COMPONENT/PC/AV/SV/TV  
3. MENU Press to select the main menu  
4. VOL- Volume down / Left orientation to adjust the item in the OSD  
VOL+ Volume up / Right orientation to adjust the item/Press to enter  
5. CH- TV channel down / to select the item in the menu  
CH+ TV channel up / to select the item in the menu  
6. Power indicator  
Illuminates red in standby mode, illuminates green when the display is  
turned on  
7.Remote Sensor  
Receiving remote control sends the infrared remote  
signal.  
 
Connection Options  
The figure is just for reference, please see the real.  
And the AC power supply switch is on the back of the set)  
AV /S-VIDEO/COMPONENT Audio Input  
Connect audio  
output from an external  
device to this jack  
DVD/DTV Input  
Connect a componentvideo/audio  
device to thesejacks  
Earphone port  
Pb  
Pr  
Y
R
L
V
ANT IN  
PC AUDIO IN  
AUDIO IN  
VIDEO IN  
S-VIDEO  
COMPONENT IN  
VGA IN  
PC Audio Input  
S-Video Input  
Connect S-Video out  
from an S-Video device  
to the jacks.  
Connect the PC output  
connector from a PC to  
the audio input port  
VGA Input  
Video Input  
Connect video  
output from an external  
device to this jack  
Connect to the VGA  
15PIN analog output  
connector of the PC  
display card for PC  
display purpose  
Antenna Input  
Connect cable or  
antenna signals to  
the TV, either direc-  
tly or through your  
cable box.  
 
Remote Control Key Functions  
When using the remote control, aim it  
Buttons on the remote control  
towards the remotesensor on theTV  
Stand By  
MUTE  
Display current input signal information  
TV channel number select  
Set time to change the TV into the  
standby status after a period of preset  
time.(time is 240/180/120/90/60/45/30/15/0)  
NICAM/A2 Stereo select  
SLEEP DISPLAY MUTE POWER  
NICAM  
PC  
AUTO AD TV/AV  
EXIT  
Quick TV channel switch(return to the  
last channel)  
Volume down/up Left/right orientation to  
adjust the item in the OSD  
TV channel up/down or select the item  
of the menu  
PSM  
OK  
SSM  
Select COMPONENT/PC/AV/SV/TV  
Select picture mode  
Q.VIEW  
PC system select  
P+  
Select sound mode  
Correspond to the differently colored  
subjects  
V-  
V+  
MENU  
Switch to the Teletext with text mode/turn  
off Teletext and switch to TV mode  
Hold on or off for current page display  
Switch to the Teletext with mix mode  
Request index page  
P-  
INDEX  
TEXT  
SUBCODE MIX  
Change display size  
Sub coded page access  
While in normal TV mode only, pressing  
the button TIME will display the teletext  
time in the top right corner for a few  
seconds.  
TIME  
HOLD  
SIZE  
REVEAL  
Reveal or hidden the hidden words  
Press to select the main menu  
Auto adjust (PC mode)  
 
Remote Control  
Installing Batteries  
1.Slide open the cover of the battery compartment on the back of the remote  
control.  
2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to  
respective mark)  
3.Replace the cover of the battery compartment.  
1
2
3
Precautions  
As strong light may interfere the  
signals, change yourposition to  
operate the remote controller if  
the television cannot be turned  
on or off as youexpect.  
Make sure that there is no  
obstacle between theremote  
controller and televisionset.  
Make sure that two 5# 1.5V alkaline  
batteries are loaded. The batteries  
must be of the same type. The batteries  
must be located properly. The batteries  
are not rechargeable.  
Keep the remote controller  
away from heat source or  
humid area toensure  
effective performance of  
the remote controller.  
 
Connection Instructions  
Grounding  
Ensure that you connect the grounding / earth wire to prevent possible  
electric shock. If grounding methods are not possible, have a qualified  
electrician install a separate circuit breaker. Do not try to ground the  
unit by connectingit to telephone wires, lighteningrods, or gaspipes.  
External Equipment Connections  
Antenna Connection  
- Antenna or Cable Service with a Cable Box Connections  
- For optimum picture quality, adjust antenna direction if needed.  
Multi-family Dwellings/Apartments  
(Connect to wall antenna socket)  
wall antenna  
socket  
ANT IN  
RF coaxial wire (75 ohm)  
VHF antenna  
UHF antenna  
Be careful not to bend the bronze  
wire when connecting the antenna.  
outdoor  
antenna  
Single-family Dwellings /Houses  
(Connect to wall jack for outdoor antenna)  
To improve picture quality in a poor  
signal area, purchase and install a  
signal amplifier.  
ANT IN  
If the antenna needs to be split for two  
TV s, install a 2-Way Signal Splitter  
in the connections.  
If the antenna is not installed properly,  
contact your dealer for assistance.  
NOTE: All cables shown are not included with the TV  
 
Connection Instructions  
PC Setup  
You can use your LCD-TV as a monitor for your personal computer using a VGA  
cable (not supplied).  
Connection and use steps:  
1.Read the userguide supplied with  
your computer and ensure that it has  
a VGAconnector;  
2.Make sure that the power of the LCD  
-TV and thePC are off;  
VGA IN  
3.Connect a Dtype 15-pin VGAinterface  
cable ( not supplied ) to the VGAvideo  
interface connector on the PC. Then  
connect the other end to the VGA video  
interface connector on the back of the  
LCD-TV.Tighten the screwson the VGA  
connectors once they are firmly  
connected;  
4.Turn on the power ofthe LCD-TV first,  
and then turn on the power of the PC;  
5.Press the TV/AV button to set the video  
input mode ofthe LCD-TV toPC-RGB;  
6.Check the image on your TV. There may be noise associated with the resolution,  
vertical pattern, contrast or brightness in PC mode. If noise is present, change  
the PC mode to another resolution, change the refresh rate to another rate or  
adjust the brightness and contrast on the menu until the picture is clear. If the  
refresh rate of the PC graphic card can not be changed,change the PC graphic  
card or consult the manufacturer of the PC graphic card.  
 
Connection Instructions  
VCR Setup  
- To avoid picture noise (interference), leave an adequate distance between the  
VCR and TV  
Connection and use steps:  
1.Read the user guide supplied with your AV devices and ensure that it has  
Composite or S-Video connectors;  
2.Make sure that the power of the LCD-TV and the AV device are off;  
Connection Option 1  
Set VCR output switch to 3 or 4 and then  
tune TV to the same channel number.  
Connection Option 2  
1. Connect the audio and video cables from  
the VCR's output jacks to the TV input jacks,  
as shown in the figure.  
When connecting the TV to VCR, match  
2
the jack colors (Video = yellow,Audio  
Left = white,and Audio Right = red).  
If you connect an S-VIDEO output from  
VCR to the S-VIDEO input, the picture  
1
quality is improved; compared to conne-  
.
cting a regular VCR to the Video input.  
2. Insert a video tape into the VCR and press  
PLAY on the VCR. (Refer to the VCR owner  
manual.)  
s
VCR  
3.Turn on the power of the LCD-TV first ;  
and then turn on the power of the AV  
device;  
4.Press the TV/AV button to set the video  
input mode of the LCD-TV to S-VIDEO  
mode or AV mode.  
 
Connection Instructions  
Cable TV Setup  
- After subscribing to a cable TV service from a local provider you can watch cable  
TV programming. The TV cannot display TV programming unless a TV tuner  
device or cableTV converter box is connectedto the TV.  
- For furtherinformation regarding cableTV service, contact your localcable TV  
service provider(s).  
Connection Option 1  
1. Select 3or 4 withchannel switch oncable  
box.  
2. Tunethe TV channel to thesame selected  
output channel oncable box.  
3. Select channelsat the cablebox or with  
the cable boxremote control.  
Connection Option 2  
1. Connect theaudio and videocables from  
the Cable Box'soutput jacks tothe TV  
input jacks, asshown in thefigure.When  
connecting the TV to aCable Box, match  
the jack colors  
(Video = yellow, Audio Left =white, and  
Audio Right= red).  
2. Select theinput source byusing the TV/AV  
button on theremote control.  
3. Select yourdesired channel withthe  
remote control forcable box.  
External AV Source Setup  
How to connect  
Connect the audioand video cablesfrom  
the external equipment'soutput jacks tothe  
TV input jacks, as shown inthe figure.  
When connecting theTV to external equip-  
ment, match thejack colors (Video = yellow,  
Audio Left =white, andAudio Right =red).  
How to use  
1. Select theinput source byusing the TV/AV  
button on theremote control.  
2. Operate thecorresponding external equi-  
pment. Refer toexternal equipment ope-  
rating guide.  
 
Basic Operating Instructions  
Turn on the LCD-TV  
SLEEP DISPLAY MUTE POWER  
Switch on the power button on the back of the set and the TV  
will in standby mode. When the POWER button on the remote  
control is pressed and the LCD-TV is turned on, the indicator  
light on the front of the LCD-TV changes from red to green.  
When the LCD-TV is turned off using the POWER button, the  
LCD-TVwill go into standby mode and the indicator light turns  
red.  
NICAM  
PC  
AUTO AD TV/AV  
PSM  
OK  
.SSM  
Q.VIEW  
P+  
TV  
V-  
MENU  
V+  
Note:  
The display of the input mode  
will disappear in 3 seconds.  
P-  
INDEX  
TEXT  
COMPONENT  
PC  
SUBCODE MIX  
TIME  
HOLD  
SIZE  
REVEAL  
AV  
SV  
Switch Among Different Inputs: TV / COMPONENT / PC / AV / SV  
Each time you press the TV/AV button, TV, COMPONENT , PC, AV, SV,  
will appear on the screen in the order.  
.Note:  
The display of the input mode will disappear in 3 seconds.  
Audio Control  
1.Press the V+ button to increase the volume. A number will appear on  
screen indicating the volume level.  
2.Press the V- button to decrease the volume. A number will appear on  
screen indicating the volume level.  
Mute  
1.Press the MUTE button to mute the sound temporarily. A mute icon  
appears on the screen.  
2.Press the MUTE button or V+/V- again to restore the sound.  
The mute icon disappears.  
 
Basic Operating Instructions  
Select the TV Channel You Want  
You can use the number keys on the remote control to directly select TV  
channels.  
The LCD-TV can store up to 100 channels , and you can press the keys on the  
remote control or on the panel to make a selection.  
1.Press the relevant key on the remote control if you want to choose any channel  
from 0 to 9. for example: if you want to choose channel 8, just press the key  
number 0 and 8.  
Note: You must press 0 first and then the other numbers from 0 to 9 if you want  
To choose channels from 0 to 9)  
2.If you want to choose a channel bigger than 9, please enter the two digits of the  
channel number you want to watch within 3 seconds. for example: select  
channel 16  
Picture Mode  
Press PSM button on the remote control for menu display . For desired mode as  
follows:  
PERSONAL STANDARD MILD FRESH  
 
Menu Operations  
* In this manual, the OSD (On Screen Display) may be different from your TV  
because it is just an example to help you with the TV operation.  
s
Press TV/AV to select the input source, and the menu in the different source is  
different .  
1. Press MENU button to display the main menu, and V+/V-to select the  
main menu .  
2. Press P+/P- to scroll through the parameters  
3. Press V+/V- buttons to make changes to the parameters  
4. Press the OK button to exit the menu  
Picture Menu Options  
Picture quality can be adjusted for any input separately .  
The picture qualityon the screencan be adjustedas follows:  
1. Press MENU button and V+/V- until the followingmenu appears  
on the screen.  
PC/COMPONENT MENU  
PICTURE  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
COLOR TEMP.  
30  
30  
2
COLD  
30  
TV/AV/SV MENU  
PICTURE  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
SATURATION  
HUE  
50  
50  
2
50  
50  
Only available inNTSC system  
Note: Sign ontop of themenu in thismanual may bedifferent from the real  
 
Menu Operations  
Picture Menu Options continued  
2. Press P+/P- button to enter the picture menu and to go up and down to  
select the desired option .  
3.Press V+/V- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired picture quality has been achieved .  
Function:  
BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it  
will add more light to dark parts of the picture and by decreasing the level ,it will  
add more dark to light parts of the picture.  
CONTRAST : Adjust the contrast of the picture . The image becomes higher as  
the number increase.  
SHARPNESS : Adjust the amount of the detail enhancement , the image  
sharpness rises as the number increases (By increasing the level, it will show  
cleaner and clearer images and by decreasing the level, it will make picture  
smoother).  
SATURATION : Press V+/V- to adjust the color  
HUE : Adjust the tone of the picture . Appear and be adjusted only under NTSC  
mode  
COLOR TEMP. : Press to select the color temperature from WARM/NORMAL/  
COLD .  
Audio Menu Options  
Sound can be adjusted for any input as follows:  
1. Press MENU and V+/V- button until the following menu appears on  
the screen  
AUDIO  
50  
50  
50  
50  
VOLUME  
BALANCE  
BASS  
TREBLE  
AUDIO MODE  
AVL  
VOICE  
OFF  
 
Menu Operations  
Audio Menu Options continued  
You can adjust sound options to the levels you prefer.  
2. Press P+/P- button to enterthe audio menuand to goup and downto  
select the desired option .  
3.Press V+/V- button to increase and decrease the level to adjust the  
selected option toyour preference .  
4. Repeat step2 and step3 until desiredsound quality hasbeen achieved ..  
Function :  
VOLUME :Adjust the volumeof your TV  
BALANCE : Adjust the balance of the audio output from left to right . When  
indication value of balance increases toward +50 , sound of the left speaker  
becomes weaker . When indication value of balance decreases toward -50 ,  
sound of the right speaker become weaker .  
BASS : Adjust the bass of the sound . Can only be adjust under PERSONAL mode .  
TREBLE : Adjust thetreble of thesound . Canonly be adjustunder PERSONAL  
mode .  
AUDIO MODE : Press V+/V- to select among PERSONAL, VOICE, MUSIC and  
THEATRE .  
AVL: Automatic Volume Limit Control reduces the effect of the large volume by  
the same volume of all the channels .  
 
Menu Operations  
Function Menu Options  
Menu Language Selection:  
The menus can be shown on the screen in the selected language. First select  
your language.  
1. Press MENU and V+/V- button until the following menu appears on the screen  
2. Press P+/P- button to select LANGUAGE.  
3. Press V+/V- button to select your desired language.  
From this point on, the on-screen menus will be shown in the language of your  
choice.  
FUNCTION  
INPUT SOURCE  
LANGUAGE  
TXT LANGUAGE  
TXT EAST/WEST  
BLUE SCREEN  
RESET  
TV  
ENGLISH  
PAN EUROPEAN  
EAST  
ON  
1. Press MENU button and V+/V- until the following menu appears  
on the screen.  
FUNCTION  
INPUT SOURCE  
LANGUAGE  
TXT LANGUAGE  
TXT EAST/WEST  
BLUE SCREEN  
RESET  
TV  
ENGLISH  
PAN EUROPEAN  
EAST  
ON  
2. Press P+/P- button to enter the function menu and to go up and down to  
select the desired option .  
3.Press V+/V- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired picture quality has been achieved .  
Functions:  
1. INPUT SOURCE : Display current mode . There are PC , AV , SV ,TV,  
COMPONENT to display .  
 
Menu Operations  
Function Menu Options Continued  
2. TXT LANGUAGE: To switch the teletext languages.  
3. TXT EAST/WEST: To select EASTor WEST .  
4.BLUE SCREEN:To set On, the screen will be in blue screen after 3 seconds  
if there is no signal.  
5. RESET : Press V+ to reset some settings to the factory default .  
Adjust Menu Options  
1. Press MENU and V+/V- button until the following menu appears on the  
screen  
ADJUST  
AUTO SYNC.  
PHASE  
CLOCK  
H POSITION  
V POSITION  
50  
50  
50  
50  
Note: This menu is only appears in PC mode .  
2. Press P+/P- button to enter the adjust menu and to go up and down to  
select the desired option .  
3.Press V+/V- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired quality has been achieved ..  
Functions:  
AUTO SYNC : Is opted for adjustment of picture location frequency and phase  
parameters .  
PHASE : Removes any horizontal distortion and clears or sharpness the displayed  
characters .  
CLOCK : Adjust the TFT-LCD to match the PC input source  
H-POSITION : Picture horizontal adjust  
V-POSITION : Picture vertical position adjust .  
 
Menu Operations  
Tuning Menu Options  
1. Press MENU and V+/V- button until the following menu appears on the  
screen  
TUNING  
CHANNEL  
1
AUTO  
DK  
OFF  
ON  
COLOR SYSTEM  
SOUND SYSTEM  
SKIP  
AFC  
FINE TUNE  
EXCHANGE  
MANUAL SEARCH  
AUTO SEARCH  
Note: This menuis only appearsin TV mode.  
2. Press P+/P- button to enter the tuning menu and to go up and down to  
select the desired option .  
3.Press V+/V- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired quality has been achieved ..  
Functions:  
1. CHANNEL : Press V+/V- to change the TV channel .  
2.COLOR SYSTEM : Select the TV color system from AUTO,PAL,SECAM.  
3.SOUND SYSTEM : Select the TV standard system from DK,I,L/L',BG  
4. SKIP : If you want skip a channel , press V+/V- to select ON , and this  
channel will be skip next time when you press P+/P- . But you can press  
digits button to select the channel . If you want to restore the channel , select  
OFF.  
5. AFC : Auto frequence control . Select ON to improve the image quality .  
6. FINE TUNE : If the image received is not very good , you can press P+/P-  
to select FINE TUNE item in menu . Then , press V+/V- button to adjust  
and improve the image quality .  
 
Menu Operations  
Tuning Menu Options Continued  
7. EXCHANGE : Press V+ to display the menu as follows:  
EXCHANGE  
FROM :  
TO :  
1
9
EXCHANGE  
Press P+/- to select the item and then V+/- to adjust the channel and V+  
to confirm.( For example: press P+/- to select FROM item, and then press  
V+/- to adjust the channel number to 1; then Press P+/- to select TO item,  
and V+/- to adjust the channel number to 9; press P+/- to select EXCHANGE item,  
and then V+ to confirm. The two channels will be exchanged)  
8. MANUAL SEARCH : Press V+/V- to start to search the channel .  
9. AUTO SEARCH : Auto search and save the channel .Press the V+ button to  
ensure automatic search function operates. All channels now playing program  
will be automatically preset in order .After the search has finished, the first  
program number will display on the screen.  
NOTE: If you want to search the channels in L or L' system, you need to set the sound  
system to L in OSD  
 
TELETEXT  
Some menu related function are not available in TELETEXT mode. MENU and AUTO AD  
control functions are not available in TELETEXT mode. If the TV is switched on by POWER  
after off in TELETEXT mode, or press TV/AV or PC button, the TELETEXT mode will  
disappear automatically.  
Teletext features may vary depending on the Broadcasting  
Companies and is only available if the channel selected is  
SLEEP DISPLAY MUTE POWER  
NICAM  
PC  
AUTO AD TV/AV  
transmitting Teletext. Pressing the TEXT button whilst in  
Teletext operation will switch the current status to TV.  
When in Teletext mode, the volume may still be altered to  
the desired listening level.  
PSM  
OK  
.SSM  
Q.VIEW  
P+  
V-  
MENU  
V+  
Page Selection  
P-  
INDEX  
TEXT  
Pages can beselected in twoways:  
a. Press P+ or P- button to increase or decrease the  
page number by one.  
SUBCODE MIX  
TIME  
HOLD  
SIZE  
REVEAL  
b. By entering the page number, using the number  
keys on the remote control.  
SIZE Button  
Press SIZE button to change display size : normal large top large bottom  
normal  
REVEAL Button  
Press REVEAL to reveal hidden words e.g. Quiz page answers . Press again  
to hide.  
Red/Green/ Yellow/CyanButtons  
These four buttons correspond to the differently colored subjects .  
HOLD Button  
Press HOLD button to remain the Teletext page when viewing multi-page  
information .  
INDEX Button  
Press INDEX button to return to the main index page .  
Depending on the way information is transmitted , this may have to be pressed  
more than once to return to the main index page .  
 
TELETEXT  
SUBCODE Button  
When Teletext information exceeds more than one page , it may take some time  
for the automatic changing of the sub pages to reach the sub page you require .  
It is possible to enter your required sub page and continue watching the normal  
programme until the correct sub page is found .  
Select the required page number using buttons 0-9 .  
If the top of the page indicates that sub pages are being transmitted yet the page  
does not change . Then the number at the top of the page is there to indicated  
that the broadcaster has updated the page s contents , there are no sub pages .  
Press SUBCODE button , page number/--- will be displayed at the bottom right  
of the screen.  
Enter desired sub page number before the page number/--- disappears . To  
select page 6 enter 0,0,0 and 6 .  
TEXT Button  
Press TEXT to enter Teletext mode and only the text page can be visible .  
MIX Button  
Press MIX button to enter Teletext mode and both the TV picture and text page  
can be visible.  
TIME  
While in normal TV mode only, pressing the button TIME will display the  
teletext time in the top right corner for a few seconds.  
 
Troubleshooting Guide  
To assist in location possible faults use help guide below.  
Troubleshooting  
Verify ifthe television isproperly plugged.  
Verify ifthe television isproperly supplied power.  
Verify ifelectricity is available.  
No picture, no sound  
Verify if correct signals are input.  
Press TV/AV button to change signal input to TV input.  
Restart the television of power supply is interrupted.  
Blank screen  
Press MUTE button and verify if Mute mode is set.  
Switch to other channel and verify if the same problem  
happens.  
No sound  
Press VOL+ button to see if the problem can be solved.  
Verify ifsound system iscorrect. Refer tosome chapter  
for adjust.  
Poor sound  
Verify ifcorrect channel isselected.  
Adjust the antenna.  
Make adjustments byFINE TUNE and MANUAL SEARCH.  
No picture in some  
channel  
Verify if the same problem exists in other channels.  
Check out of picture and sound systems.  
Refer to relative instructions in the Manual for color  
adjust.  
No color for some channel  
program (black and white)  
Verify ifthe antenna iscorrectly connected.  
Verify ifthe antenna isin good condition.  
Make fine adjustmentof channel.  
Spots with some or  
all pictures  
Disconnect the televisionfrom power supplyand, 10  
seconds later, connect the televisionto the powersupply.  
If the problemstill exists, contactauthorized after-sales  
service for technicalassistance.  
Television out of control  
Note:  
1.If the fault can not be repaired using the above guide consult with your local authorized service  
center.  
2.The TV set must only be repaired by a qualified registered service person. Never attempt to  
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.  
 
Specifications  
Specifications of the television that you have just purchased may  
vary from the information in this table due to technical innovations.  
Model  
L1509A-A/L1709A-A L1910A-A/L2009A-A/L1911W-A  
Picture, sound  
PAL/SECAM-B/G,I,D/K,L,L  
system  
Audio output  
External port  
1.5W+1.5W  
AV input PC input S-VIDEO input PC audio input  
Headphone output COMPONENT input Antenna input  
~150-240V 50/60Hz  
Power requirements  
Power consumption  
Temperature  
50W  
60W  
Working:5 C~35 C  
Storage:-10 C~45 C  
Remote control  
Batteries  
Accessories  
Owner's manual  
Warranty card  
Note Warranty card is only forthe special countriesand areas  
Note:  
All specifications are subject to change without notice.  
All quality are approximate value.  
 
V0.1  
0090508262  
 

Grizzly Drill H7827 User Manual
Grundig Wheelchair HS 7630 User Manual
Guardian Technologies Air Cleaner Hygia 40 User Manual
Haier Freezer HVF160SS2 User Manual
Harbor Freight Tools Bouncy Seat 96126 User Manual
Havis Shields Laptop Docking Station 43680381 User Manual
Hayter Mowers Lawn Mower 410D User Manual
Heatcraft Refrigeration Products Refrigerator H ENGM0408 User Manual
HP Hewlett Packard Network Cables HP 85025C User Manual
Husqvarna Chainsaw 340e User Manual