HL15B/HL15E/HL19E/HL19W/HL22E
LCD TV
USER MANUAL
Please read this manual carefully
before using this TV set and keep it
for future reference.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8) Do not install near any hear sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purposes of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10) Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11) Only use the attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long
periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15 Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Safety Instructions
SAVE THESE INSTRUCTIONS
Thank you for using ourHaier product. This easy-to-use manualwill guide youin
getting the bestuse of yourproduct. Remember torecord the modeland serial
number. They are onlabel in backof the unit.
Model number
serial number
Date of purchase
Staple your receiptto your manual. You will need itto obtain warrantyservice.
CONTENT
Safety Notice Items...................................................................................
Front Panel Controls..................................................................................
Connection Options...................................................................................
Remote Control Key Functions...................................................................
1
2
3
4
5
Remote Control
..................................................................................
Installing Batteries..................................................................................
5
Connection Instructions.............................................................................
Grounding..............................................................................................
External equipment Connections..............................................................
Antenna Connection.............................................................................
PC Setup.............................................................................................
VCR Setup...........................................................................................
Cable TV Setup....................................................................................
6
6
6
6
7
8
9
External AV Source Setup......................................................................
9
Basic Operating Instructions.......................................................................
10
Turn on the LCD-TV.................................................................................
10
Audio Control..........................................................................................
Mute......................................................................................................
10
10
Select the TV Channel You Want...............................................................
11
Picture Mode...........................................................................................
11
11
Sound Mode.........................................................................................
Sleep......................................................................................................
11
INFO......................................................................................................
GUIDE...................................................................................................
11
11
-button...................................................................................................
12
CH.LIST button........................................................................................
12
FAV.LIST button......................................................................................
ARC button.............................................................................................
Menu Operations.......................................................................................
Video Menu Options...............................................................................
Video Menu Options Continued...............................................................
Audio Menu Options................................................................................
Audio Menu Options Continued................................................................
12
12
13
13
14
14
15
Function Menu Options.............................................................................
16
Function Menu Options Continued.............................................................
Adjust Menu Options................................................................................
Adjust Menu Options Continued..............................................................
17-19
19
20
Channel Menu Options..............................................................................
20
Channel Menu Options Continued..............................................................
Lock Menu Options..................................................................................
21
21
Lock Menu Options Continued...................................................................
22-24
25
26
Troubleshooting Guide...............................................................................
Specifications...........................................................................................
Warranty ..................................................................................................
27
Safety Notice Items
Incorrect usage may cause fire or electric shock. To prevent this, please do as
required when you are installing, using and cleaning this machine. To ensure
your safety and extend the life-span of LCD-TV, please read the following items
carefully before using:
l Please read and understand all the instructions before operation;
l Please keep this manual for later use;
l Please comply strictly with the warning instructions on the machine and
in this book;
l Please comply with the instructions provided;
l Please do not use additional devices that are not recommended by
manufacturer:
l Before operation, please make sure that the operating voltage of your unit is
correct;
l Do not place the unit on unstable, dusty and humid places;
l Never put the unit in direct sunlight or near heat sources;
l Allow enough space for proper ventilation;
l Please keep water away from the LCD-TV . If water comes in contact with the
LCD-TV, disconnect the power cord from the power source, then wipe the set
with a dry soft cloth;
l Do not remove the back cover. If service is needed, please contact an
Authorized service technician.
Front Panel Controls
2
3
4
5
1
HL15B
HL19W
TV/AV MENU VOL- VOL+ CH-
CH+ POWER
6
7
7
6
HL19E
HL15E
DC POWER SWITCH
DC POWER SWITCH
Control Panel Function
1. Power supply switch
2.TV/AV Selects the input signals: TV/AV/S-VIDEO/PC/COMPONENT
3. MENU Press to select the main menu
4. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL+ Volume up / Right orientation to adjust the item in the OSD
/Press to enter
5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
6. Power indicator
7.Remote Sensor
Receives the signals from the remote control
Connection Options
The above figure is for reference only,
connections may differ depending upon
the models
Antenna Input
Connect cable or
antenna signals to
the TV, either direc-
tly or through your
cable box.
Earphone port
AV/S-VIDEO/
COMPONENT Audio
Input
PC Audio Input
Connect the audio
output from the pc
to the PC audio input port
Connect audio output
from an external device
to these jacks
Video Input
Connect video output
from an external
device to this jack
S-Video Input
Connect S-Video out
from an S-Video device
to the jacks.
Component Input
Connect a component
video device to
VGA Input
these jacks
Connect to the VGA
15PIN analog output
connector of a PC
graphics card to use set
as a PC display
Remote Control Key Functions
When using the remote control, aim it
Buttons on the remote control
towards the remotesensor on theTV
MUTE
Mute
Return to Previous Channel in TV mode
Input selection
Q.VIEW
INFO
INPUT
EXIT
Program Number
Select MONO,STEREO, SAP in NTSC system
Confirm button
Volume/Channel Selection
CCD ( closed caption) On / Off
TV Sleep button
Shows program schedule in DTV
Select the aspect ratio
Open the favorite channel list in DTV
Open the channel list in DTV
Adjust sound mode
SAP
OK
P.MODE
MENU
CH+
Select additional channels
Adjust Picture Mode
VOL
-
VOL
+
MENU
Exit On Screen Display
Call Screen Infromation
Standby
CH-
CC
SLEEP
S.MODE
CH.LIST
GUIDE
ARC
FAV.LIST
Remote Control
Installing Batteries
2XAAA
!
Remove the battery cover.
!
Insert two size AAAbatteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
Precautions
As strong light may interfere with the
signals, change yourposition to
operate the remote control if
the television cannot be turned
on or off as expected.
Make sure that there is no
obstacle between theremote
controller and televisionset.
Make sure that two AAA 1.5V alkaline
batteries are loaded. The batteries
must be of the same type, must be
inserted properly, and must not be
rechargeable.
Keep the remote control
away from heat sources or
humid areas toensure
effective performance of
the remote.
Connection Instructions
Grounding
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connectingit to telephone wires, lighteningrods, or gaspipes.
External Equipment Connections
Antenna Connection
- Antenna or Cable Service with a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
Bronze Wire
RF coaxial wire (75 ohm)
VHF antenna
UHF antenna
Turn clockwise to tighten.
Bronze Wire
Be careful not to bend the bronze
wire when connecting the antenna.
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.
If the antenna needs to be split for two
Tvs, install a 2-Way Signal Splitter
in the connections.
If the antenna is not installed properly,
contact your dealer for assistance.
NOTE: Cables shown are not included with the TV
Connection Instructions
PC Setup
You can use your LCD-TV as a monitor for your personal computer using a VGA
cable (not supplied).
Connection and use steps:
1.Read the userguide supplied with
your computer and ensure that it has
a VGAconnector;
2.Make sure that the power of the LCD
-TV and thePC are off;
3.Connect a Dtype 15-pin VGAinterface
cable ( not supplied ) to the VGAvideo
interface connector on the PC. Then
connect the other end to the VGA video
interface connector on the back of the
LCD-TV.Tighten the screwson the VGA
connectors once they are firmly
connected;
4.Turn on the power ofthe LCD-TV first,
and then turn on the power of the PC;
5.Press the INPUT button to set the video
input mode of the LCD-TV to PC;
6.Check the image on your TV. There may be noise associated with the resolution,
vertical pattern, contrast or brightness in PC mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card can not be changed,change the PC graphic
card or consult the manufacturer of the PC graphic card.
Connection Instructions
VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
Composite or S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are off;
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from
the VCR's output jacks to the TV input jacks,
as shown in the figure.
When connecting the TV to VCR, match
the jack colors (Video = yellow,Audio
Left = white,and Audio Right = red).
If you connect an S-VIDEO output from
.
VCR to the S-VIDEO input, the picture
quality is improved; compared to conne-
cting a regular VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner
manual.)
s
3.Turn on the LCD-TV first ; and then turn on the
power of the AV device;
4.Press the INPUT button to set the video
input mode of the LCD-TV to
S-VIDEO mode or AV mode.
1
2
VCR
Connection Instructions
Cable TV Setup
- After subscribing to a cable TV service from a local provider you can watch cable
TV programming. The TV cannot display TV programming unless a TV tuner
device or cableTV converter box is connectedto the TV.
- For furtherinformation regarding cableTV service, contact your localcable TV
service provider(s).
Connection Option 1
1. Select 3 or 4 with channel switch on cable
box.
2. Tune the TV channel to the same selected
output channel oncable box.
3. Select channelsat the cablebox or with
the cable box remote control.
Connection Option 2
1. Connect the audio and video cables from
the Cable Box'soutput jacks tothe TV
input jacks, as shown in the figure.When
connecting the TV to a Cable Box, match
the jack colors
(Video = yellow, Audio Left = white, and
Audio Right = red).
2. Select the input source by using the INPUT
button on the remote control.
3. Select your desired channel with the
remote control forcable box.
External AV Source Setup
How to connect
Connect the audio and video cables from
the external equipment's output jacks to the
TV input jacks, as shown in the figure.
When connecting the TV to external equip-
ment, match the jack colors (Video = yellow,
Audio Left =white, andAudio Right =red).
How to use
1. Select the input source by using the INPUT
button on the remote control.
2. Operate the corresponding external equi-
pment. Refer to external equipment ope-
rating guide.
Basic Operating Instructions
Turn on the LCD-TV
When the POWER
button is pressedand the LCD-TV
MUTE
Q.VIEW
INFO
is turned on, the indicator lighton the frontof the LCD-TV
changes from red to green(or from dark to light). When the
LCD-TV is turnedoff using the power button, the LCD-TV will
go into standby mode and the indicator light turns red(or
turns dark).
INPUT
EXIT
SAP
OK
P.MODE
CH+
VOL
-
VOL
+
MENU
CH-
CC
SLEEP
S.MODE
CH.LIST
GUIDE
ARC
FAV.LIST
Each time you press the INPUT button, TV, AV, S-VIDEO,PC,
COMPONENT will appear on the screen in order.
Audio Control
1.Press the VOL+ button to increase the volume. A number will appear
on screen indicating the volume level.
2.Press the VOL- button to decrease the volume. A number will appear
on screen indicating the volume level.
Mute
1.Press the MUTE button to mute the sound temporarily. A mute icon
appears on the screen.
2.Press the MUTE button or VOL+ again to restore the sound.
The mute icon disappears.
Basic Operating Instructions
Select the TV Channel You Want
You can use the number buttons on the remote control to directly select TV
channels.
And you can press the buttons on the remote control or on the panel to make a
selection.
Picture Mode
Press P.MODE button on the remote control for menu display . For desired mode as
follows:
CUSTOM STANDARD MILD VIVID
Sound Mode
Press S.MODE button on the remote control for menu display . For desired mode as
follows:
CUSTOM STANDARD MUSIC THEATRE
Sleep
Press SLEEP button to set the time : SLEEP OFF-SLEEP 5 MIN-SLEEP 10 MIN-
SLEEP 15 MIN-SLEEP 30 MIN-SLEEP 45 MIN-SLEEP 60 MIN-SLEEP 90 MIN-
SLEEP 120 MIN
This feature allows you to turn off the television after a pre-selected
number of minutes
INFO
Press INFO button to display the current information.
In the digits channel of TV, press INFO button to display basic information,
press the second time to display DTV information.
GUIDE(only available in digital signal)
Press GUIDE button in digital channels to display Guide menu.(This menu is
just for you to see the information and can not be changed)
Press VOL+/VOL- to switch the page and CH+/CH- to select up and down for
you to look over.
Basic Operating Instructions
- button
Press to select additional channels (digital and analog) being broadcast by the
same station. For example, to select digital channel “11.1”, press “11”, then
press “-” and“1”; to select analog channel13.0, press 13first, then press -
and 0.(You must press- and 0when you selectanalog channel. Ifyou just press
the number(eg.13), you will get digital channel)
CH.LIST button(only available in digital signal)
Press to display the digital program list. Press CH+/CH- to select the item and
OK button to select the channel you desired.
FAV.LIST button(only available in digital signal)
Press to display favorite list. Press CH+/CH- to select the item and VOL+ to
select the channels and VOL- to select NONE.
ARC button
ARC Button: Press to select between NORMAL, WIDE and ZOOM mode while
in Digital TV Mode, and NORMAL, ZOOM, 16:9 and 4:3 in Analog TV mode.
NOTE: WIDE, 16:9and 4:3 are only available in some models.
The aspect ratio can only be adjusted when 16:9 signal input in Digital TV mode.
Menu Operations
* In this manual, the OSD (On Screen Display) may be differ from your TV
These are examples to illustrate the TV's operation.
Press INPUT to select the input source. The menu for each source may be
different .
1. Press MENU button to display the main menu, and VOL+/VOL-to select the
main menu .
2. Press CH+/CH- to scroll through the parameters
3. Press VOL+/VOL- buttons to make changes to the parameters
4. Press the EXIT button to exit the menu
Video Menu Options
Picture quality can be adjusted for any input separately .
The picture qualityon the screencan be adjustedas follows:
1. Press MENU button and VOL+/VOL- until the followingmenu appears
on the screen.
2. Press CH+/CH- button to enterthe VIDEO menuand to goup and downto
select the desired option .
PC MENU
COMPONENT MENU
VIDEO
VIDEO
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TEMP
30
30
0
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
30
30
0
COOL
0
H POSITION
V POSITION
0
0
30
30
TV/AV/S-VIDEO MENU
VIDEO
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
50
50
0
50
Only available inanalog signal
MID
50
NOISE REDUCE
TINT
Only available inNTSC
system
Note: Symbols ontop of themenu in thismanual may differ from theactual set display
Menu Operations
Video Menu Options continued
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Function:
BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it
will lighten the dark parts of the picture and by decreasing the level it will
darken the lighter parts of the picture.
CONTRAST : Adjust the contrast of the picture . The contrast becomes higher as
the number increases.
SHARPNESS : Adjust the amount of the detail enhancement , the image
sharpness rises as the number increases (By increasing the level, it will show
cleaner and clearer images and by decreasing the level, it will make the picture
smoother).
COLOR : Press VOL+/VOL- to adjust the color
NOISE REDUCE: Adjust the quality of the picture by selecting OFF,LOW,MID,HIGH.
TINT : Adjust the tone of the picture . This will appear and can be adjusted only in
NTSC mode
COLOR TEMP : Press to select the color temperature from WARM/NEUTRAL/COOL
H POSITION : Picture horizontal adjust
V POSITION : Picture vertical position adjust .
Audio Menu Options
Sound can be adjusted for any input as follows:
1. Press MENU and VOL+/VOL- button until the following menu appears on
the screen
AUDIO
CUSTOM
AUDIO MODE
VOLUME
BASS
50
30
70
50
TREBLE
BALANCE
AVL
OFF
Menu Operations
Audio Menu Options continued
You can adjust sound options to the levels you prefer.
2. Press CH+/CH- button to enterthe audio menuand to goup and downto
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option toyour preference .
4. Repeat step 2 and step 3 until desired audio quality has been achieved .
Function :
AUDIO MODE : Press VOL+/VOL- to select among CUSTOM, STANDARD,
MUSIC and THEATRE .
VOLUME :Adjust the volumeof your TV
BASS : Adjust the bass of the sound . Can only be stored under CUSTOM mode .
TREBLE : Adjust the trebleof the sound. Can onlybe stored underCUSTOM
mode .
BALANCE : Adjust the balanceof the audiooutput from leftto right . When
indication value of balance increases toward 100 , sound from the left speaker
becomes weaker . When indication valueof balance decreasestoward 0 ,
sound from the right speaker become weaker .
AVL: Automatic Volume Limit Control reduces the effect of high volumes by
limiting the same volume peaks across all channels .
Menu Operations
Function Menu Options
1. Press MENU button and VOL+/VOL- until the following menu appears
on the screen.
FUNCTION
INPUT SOURCE
LANGUAGE
CC MODE
TV
ENGLISH
ON
NTSC CAPTION
DTV CAPTION
LOCK
CC1
BLUE SCREEN
ASPECT RATIO
TIME
ON
NORMAL
OSD TIMEOUT
RESET
SHORT
2. Press CH+/CH- button to enter the function menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired settings have been achieved .
Functions:
1. INPUT SOURCE : Display current mode . There are TV, AV, S-VIDEO, PC,
COMPONENT to display .
2. LANGUAGE : Press VOL+/VOL- to select the OSD language.
3. CC MODE: Press VOL+/VOL- to select ONor OFF.
4. NTSC CAPTION(not available in PC) :Press VOL+/VOL-buttons to select
the Closed Caption options. Closed Captioning helps the hearing impaired
with the broadcast program, as well as helping children learn how to read.
A built in decoder displays the audio portion of a program as text on the
screen when this option is selected.
CC1: When CC1is displayed on TV means CC MODE is turned on.
CC2 to CC4: For other modes of video related broadcast information.
TT1: For program guide and other information displayed by broadcasters.
(This blocks a large portion of the picture on your screen).
TT2 to TT4 :For other modes of information displayed by broadcasters.
(This blocks a large portion of the picture on your screen).
IMPORTANT: Closed captioning availability entirely depends on broadcasters
supplying the signal. Therefore, closed captioning might not always be
available and language availability will differ by broadcast.
Menu Operations
Function Menu Options Continued
Note: Select CC1 for full translation of the primary language such as English in
your area. Select CC2 for secondary language translation such as French or
any other language that may be broadcast in your area.
5.DTV CAPTION (can only be available in DTV):Press CH+/- to select DTV
CAPTION and VOL+ to enter .
DTV CAPTION
DTV CAPTION
SERVICE1
DTV CAPTION STYLE CUSTOMER
CUSTOMER
DTV CAPTION: This allows you to configure the way you choose to view the
digital captioning.
Select one of the digital service channels made available by the caption
provider.
There are 6standard services. Service1 is designatedas the Primary
Caption Service. This service containsthe verbatim, ornear-verbatim
captions for the primary language being spoken in the accompanying
program audio.
Service 2 isdesignated as theSecondary Language Service. This service
contains captions in a secondary language which are translations of the
captions in theprimary Caption Service. The other service subchannels are
not pre-assigned. It is up to the discretion of the individual caption provider
to utilize theremaining service channels.
DTV CAPTION STYLE: To select between DEFAULT and CUSTOMER.
CUSTOMER: (only can be enteredwhen DTV CAPTION STYLE is Customer)
Press VOL+ to enter the following display: This allows you to modify how digital
captions are displayed on your TV. Select from the following options to change
the visual characteristics of your TV`s digital captioning.
DTV Caption Style
Size
Font
Normal
Font0
Solid
White
Black
None
Black
Solid
TextOpacity
TextColor
Edge Color
Edge Type
BG Color
BG Opacity
Size: Select this option to select the size of caption display according to your
own preference.
Press the VOL+/VOL- button to select them
Font: To select the font of caption display according to your own preference.
Press the VOL+/VOL- button to selectFont0, Font1 Font2, Font3, Font4,
Font5, Font6, Font7.
Menu Operations
Function Menu Options Continued
Text Opacity: Specify the opacity for the text color.
Text Color: Select the text color or the opacity of the text box of caption display
according to your own preference.
Select a colorand one ofthe opacity options.
Edge Color: PressVOL+/VOL- to select the edge color according your own
preference
Edge Type:Press VOL+/VOL- to select the edge color according your own
preference
BG Color: Select a background color.
BG Opacity: Select the opacity for the background color.
6.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set ON, the screen
will turn blue if there is no signal.
7.ASPECT RATIO(not available inPC): To select NORMAL, WIDE and ZOOM in
Digital TV mode and NORMAL, ZOOM, 16:9 and 4:3 in Analog TV mode.
(WIDE, 16:9 and4:3 are only available in some models)
8.TIME Press CH+/CH- to select this item and VOL+ to enter and display
as the following:
TIME
DATE/TIME
TIMER ON
TIMER OFF
SLEEP TIMER
TIME ZONE
DAYLIGHT
OFF
ALASKA
ON
DATE/TIME: Setting the clock is necessary in order to use the various timer
features of theTV. Also, youcan check thetime while watchingthe TV.
Press VOL+ toenter the followingmenu to set:
DATE/TIME
DATE
TIME
00:00
MODE
DATE
TIME
MANUAL
01/01/2005
00:00
01/01/2005
Setting MODE to AUTO or MANUAL. DATE and TIME can only be available in
MANUAL mode. Press VOL+/VOL- to select the position you want to change and
CH+/CH- to set.
TIMER ON: Press VOL+ to enter the submenu to set. When this function is used,
the TV can automatically turn the power on at the present time in the standby
status and displaythe preset program.
Menu Operations
Function Menu Options Continued
TIMER ON
ON TIME
--:--
MODE
ON TIME
OFF
--:--
Press CH+/CH- to select MODE and VOL+/VOL- to set it OFF/DAILY/ONCE.
Press CH+/CH- to select ON TIME and VOL+ to enter. Press VOL+/VOL- to select
the position you want to change and CH+/CH- to set.
TIMER OFF: Press VOL+ to enter the submenu to set.. Using this function can
turn the TV set automatically into standby status at the preconcerted time. Same
as adjustment of TIMER ON .
SLEEP TIMER: The sleep timer automatically shuts off the TV after a preset time
(from 0 to 120 minutes)
TIME ZONE: This functionallows you to select your local time zone. Broadcasted
time information will correct the clock display for your local time.
DAYLIGHT: DAYLIGHT is automatically set by specially broadcasted signals.
This menu item allows you to disable the automatic setting of daylight. This is
useful if you live in an area or state where daylight is no applied, but you receive
channels from other areas where daylight signals are broadcasted.
9. OSD TIMEOUT: Press to set the time of the OSD displaying on screen.
10. RESET : Press VOL+ to reset some settings to the factory default .
Adjust Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
ADJUST
AUTO CONFIG
PHASE
CLOCK
H POSITION
V POSITION
0
0
0
0
Note: This menu appears only in PC mode .
2. Press CH+/CH- button to enter the adjust menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved ..
Menu Operations
Adjust Menu Options Continued
Functions:
AUTO CONFIG : Automatically adjusts picture location frequency and phase
parameters .
PHASE : Removes any horizontal distortion and clears or sharpens the displayed
characters .
CLOCK : Adjust the TFT-LCD to match the PC input source clock frequency
H POSITION : Picture horizontal position adjust
V POSITION : Picture vertical position adjust .
Channel Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
CHANNEL
.
CH NO
NAME
11.1
TUNER
SKIP
AFC
CABLE
OFF
ON
Only available in analog signal
FINE TUNE
AUTO SCAN
63.25MHZ
Note: This menuappears only inTV mode .
2. Press CH+/CH- button to enter the channel menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4.Repeat step 2 and step 3 until desired settings have been achieved .
Functions:
1. CH NO. : Press VOL+/VOL- to go up and down to set the channel number.
The display will show the current playing channel.
2. NAME: Allows you change the name of the channels in analog signal.
And display the channel name automatically in digital signal.
Menu Operations
Channel Menu Options Continued
3.SKIP : If you want skip achannel , pressVOL+/VOL- to select ON , and this
channel will be skipped next timewhen you pressCH+/CH- . You can press
the digit buttonsto select thechannel . Ifyou want torestore the channel, select
OFF.
4. AFC : Auto frequency control. Select ON toimprove image quality.
5. FINE TUNE : If the image or sound received is not very good , you can
press CH+/CH- to select FINE TUNE in the menu. Then , press VOL+/VOL-
button to adjustand improve theimage quality. Do notuse this featureunless
reception is poor.
6. TUNER : Press VOL+/VOL- button to select AIR (VHF and UHF) and CABLE
reception preference.
7. AUTO SCAN :Auto search and program channels .Press the VOL+ button
to start to search and the following menu will appears on the screen:
AUTO SCAN
NO
YES
Press CH+/CH- or VOL+/VOL- to select YES and MENU to confirm then the
automatic search function operation. All channelsnow available will be
automatically preset in order .After the search has finished, the first digital
program number will display on the screen. This search automatically adds
only the active channels in your area to the TV's memory. It deletes any
channels on which there is no broadcast or a poor signal.
Note: The AUTO SCAN function will scan the channels on the selected
antenna input. If the TV is connected to cable, please select CABLE under
' TUNER ' sub menu. The TV searches channels in analog first and then
searches channels in digital signal the second time.
Lock Menu Options
1. Press the MENU and VOL+/VOL- button until theFUNCTION menu appears
on the screen .
2. Press CH+/CH- button to select LOCK and VOL+ to enter, the following
will display on the screen:
PASSWORD
----
3. Then input the password 0000. It will bring LOCK menu display on the
screen. You will see the following menu on your screen:
Menu Operations
Lock Menu Options Continued
LOCK
CHANGE PASSWORD
PARENTAL LOCK
MPAA RATING
PG RATING
ON
PG
TV-14
PG CONTENTS
CA ENGRATING
CA FRENRATING
DOWNLOAD RATING
(
)
C8+
8+
This function enables you to block certain TV channels in accordance to the
requirements established by the FCC.
PARENTAL LOCK: Press VOL+/VOL- button to select ON or OFF. parental Lock
off means the lock function is turned off . If the Parental Lock is in "off" mode then
function will notbe active toaccept the ParentalGuidance signal. ParentalLock
on means the lock function is turned on. If the lock is in the "on" mode then it
actively accepts the Parental Guidance signal.
MPAARATING: When MPAA ratingis selected, youcan select OFF/G/PG/PG 13
R/NC17/X .
PG RATING:Select the TV Rating option. You can select fromOFF/TV-Y/TV-Y7/
TV-G/TV-PG/TV-14/TV-MA.
PG CONTENTS: Press to set the grade of the program . When there is this
grade of program , this program will not be display .
CA ENGRATING: Select this option. You could select fromOFF/C/C8+/G/PG/
14+/18+ .
CA FRENRATING: Select this option. You could select fromOFF/G/8+/13+/16+/
18+ .
CHANGE PASSWORD: The "Default Password" preset by the manufacturer is
"0000" . Ifyou want tochange the presetpassword to yourown password, just
choose any four digits that can be easily remembered and set. Once you set
password for a particular channel, that channel will be blocked.
Menu Operations
Lock Menu Options Continued
PARENTAL LOCK TECHNOLOGY:
The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV
PROGRAMS Guide ratings to block certain types of TV programs and movies.
To clearly understand TV program rating codes, read the following information:
U.S. TV Program Ratings
NR:
Not Rated-this means that programs are not rated or rating does not apply.
TV-Y: For all children - these types of rated programs are designed for a very young
audience, including children from ages 2-6.
TV-Y7: Directed towards older children - this type of rated programs may include
comedic violence of mild physical, or may frighten children under the age of 7.
TV-G: General audience - these types of rated programs contains little or no
violence, no strong language, and little or no sexual dialogue and situations.
TV-PG:Parental Guidance Suggested-this type of rated programs may contain
limited violence, some suggestive sexual dialogue and situations, and rare
language.
TV-14: Parents strongly cautioned-these types of rated programs may contain sexual
content, strong language and more intense violence.
TV-MA:Mature audience only these types of rated programs may contain sexual
violence, explicit sexual content and profane language.
FANTASY VIOLENCE : This type of rated programs contain Fantasy and cartoon
violence.
DIALOGUE: This type of rated programs contain dialogue with sexual content.
LANGUAGE: This type of rated programs contain offensive language.
SEX: This type of rated programs contain sex.
VIOLENCE: This type of rated programs contain violence.
To understand clearly about movie rating codes, read the following list:
U.S. Movie Rating Chart
NR: This means movie is not rated yet. It is pending government rating approval.
G:
General Audience-this type of movie rating means all ages admitted to see
the movie.
PG: Parental guidance suggested. Some material may not be suitable for children.
PG 13:Parents Strongly Cautioned - this type of movie rating means some material
may not be appropriate for children under13.
R:
Restricted- This type of movie rating means children under 17 of age require
to be with parent or guardian.
NC 17:This type of movie rating means no one 17 and under admitted.
X:
This type of movie rating means adults only.
Menu Operations
Lock Menu Options Continued
To clearly understand Canadian program rating codes, read the
following list:
Canadian English Rating Chart
C: This type of programming is intended for children under age 8. There is no
offensive language, nudity or sexual content.
C8+:These types of rated programs are generally considered acceptable for children
8 years and over. There is no profanity, nudity or sexual content.
G: These types of rated programs are generally suitablefor all audiences.
PG: Parental Guidance Suggested -in these types of rated programs, some material
may not be suitable for children.
14+: In these types of rated programs, some contentmay not be suitable forviewers
under the age of 14.Parents are strongly cautioned not to have their children
view 14+ rated programs bypre-teens and early teens.
18+: Adults Only-these types of rated programs are only for adult viewers only.
Canadian French Rating Chart
OFF: NO controls
G:These types of rated programsare generally suitable for allaudiences.
8+: Children 8 years and above (French)
13+: 13 years old and above(French)
16+: 16 years old and above(French)
18+: Adults Only-these types of rated programs are only for adult viewers only.
Troubleshooting Guide
To assist in location possible faults use help guide below.
Troubleshooting
Verify ifthe television isproperly plugged in.
Verify ifthe television isproperly supplied withpower.
Verify thatelectricity is available.
No picture, no sound
Verify if correct signals are input.
Press INPUT button to change signal input to TV input.
Restart the television of power supply is interrupted.
Blank screen
Press MUTE buttonand verify ifMute mode ison.
Switch to anotherchannel and verifyif the sameproblem
happens.
No sound
Press VOL+ buttonto see ifthe problem canbe solved.
Verify ifsound system isfunctional. Refer tochapter on
adjusting.
Poor sound
Verify ifcorrect channel isselected.
Adjust the antenna.
Make adjustments byFINE TUNE
No picture in some
channel
Verify if the same problem exists in other channels.
Check picture and sound systems.
Refer to relative instructions in the Manual for color
adjust.
No color for some channel
program (black and white)
Verify ifthe antenna iscorrectly connected.
Verify ifthe antenna isin good condition.
Make fine adjustmentof channel.
Spots with some or
all pictures
Disconnect the televisionfrom power supplyand, 10
seconds later, reconnect to thepower supply.
If the problemstill exists, contactan authorized
service depot fortechnical assistance.
Abnormal functioning
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized
service center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the backcover as theTV set has dangerous voltageslevels inside thatmay be
fatal or causefire.
Specifications
Specifications of the television that you have just purchased may
vary from the information in this table due to technical innovations.
Model
HL15B/HL15E
HL19E/HL19W
HL22E
Picture, sound
system
NTSC, ATSC, Cliar QAM
1.5W+1.5W
Audio output
AV input PC input S-VIDEO input PC audio input
Headphone output YPbPr input Antenna input
External input port
~120V 60Hz
Power requirements
Power consumption
Temperature
50W
60W
60W
Working:+5 ~+35
Storage:-15 ~+45
Working:20% ~ 80%
Storage: 5% ~ 90%
Humidity
Remote control
Batteries
User manual
Accessories
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
Warranty
Warranty
90 days labor
and one year parts .
V0.1
0090500543B
|