Haier Clothes Dryer HDY C70 User Manual

Name of parts  
Program selector  
Container handle  
HDY-C70/HDY-C70 ME  
Door  
Table of Contents  
Before using the dryer  
Name of parts....................................1  
Important Safety Instructions .....2-3  
Installation.....................................4-6  
Preparation ......................................7  
Plinth  
Earth terminal  
Back plate  
How to operate the dryer  
Power supply cable  
Control panel.................................8-9  
Programming guide.........................10  
Drying methods ...............................11  
Back cover board  
Maintenance  
Rear footplate  
Cleaning and maintenance .......12-13  
Trouble shooting .......................14-15  
Drainage outlet  
Wiring circuit ..................................16  
Specifications .................................17  
Warning  
Read all instructions before using dryer.  
Dryers are provided with operating,care and in-  
stallation instructions  
SAVE THESE INSTRUCTIONS  
This diagram may be slightly different from the layout of the machine you have just  
purchased due to techincal improvements  
 
1
Installation  
Installation  
b
Dimensions  
Reversible Door  
a = 855 mm  
b = 620 mm  
c = 595 mm  
Weight = 43 kg  
This unique feature allows you to install the dryer in the most convenient position  
in you home  
may be changed. The procedure is as follows:  
its opening direction  
1. Unscrew the 4 hinge screws holding the door onto the machine and remove  
the door.  
2. Unscrew the door and prise out the catch cover on the opposite side  
of the door and transpose them.  
c
3. Unscrew the door hinges and prise out the hinge covers on the opposite side  
of the door and transpose them.  
4. Remove the 4 blanking plugs from the screw holes on the machine and insert  
them in the holes on the other side.  
5. Refit the door on the opposite side of the machine.  
Packing accessories  
Checklist of the accessories and materials provided with the machine:  
Owner's  
manual  
Certificate of  
Conformity  
Name  
Drainpipe  
Quantity  
D
E
F
To ensure the dryer operates normally, attention must be paid to the  
following instructions;  
Ƶ The dryer must be level when installed. Its bottom is equipped with  
adjustable feet. Adjust these 4 feets to level the unit before operation˗  
Ƶ Check whether there is any damage to the dryer during transportation.  
Any damaged dryer must not be used. if the unit is damaged, contact  
your dryer supplier;  
H
I
GꢄH  
Ƶ The dryer must be kept away from flammable substances˗  
Ƶ The surrounding environment must be dry and ventilated;  
ƵꢄTo allow the dryer to perform better, the ambient temperature must not be  
lower than 10  
ć
nor higher than 35ćꢀ  
ꢄꢄ  
a-door hinge b-catch cover c-door  
d-hinge cover e-door catch f-blanking plug  
 
Preparation  
Installation  
Drain switchover  
Attention  
ƵꢂBefore use, clean any deposits from inside the drum of the dryer with  
a wet towel;  
During the drying of the laundry, the condensate water is automatically  
collected in the box inside the machine, the water needs to  
be removed from the box after every drying cycle. If your  
dryer is in the vicinity of a drain, you may allow the condensed  
water to discharge directly into the drain through the drainpipe  
provided to avoid emptying the box every time.  
The method to connect the drainpipe is as follows:  
1. Loosen the hose clip with the drain switchover joint;  
2. Pull the hose off the joint;  
3. Install the accessory drainpipe on the joint;  
4. Fix the hose in place with the clip;  
Note: The outlet of the drainpipe must not be higher than 1.0 m above  
the floor  
Ƶ Clean debris on the filter screen to increase the drying efficiency.  
Turning on power  
Before turning on the power for the dryer, check:  
Ƶ
Whether the supply voltage is in accordance with the value indicated on the  
nameplate;  
ƵWhether the supply receptacle can withstand the maximum power load to  
Ƶ
the dryer;  
ƵWhether the supply receptacle is in accordance with the plug of the dryer.  
Ƶ
If not, replace the power supply cable or receptacle to make them accord  
with each other; The replacement of the power supply cable must be  
done by a qualified professional or our authorized service agent;  
ƵThe dryer must be grounded securely.  
Treatment of laundry to dry  
ƵCheck the care label inside the garments to ensure the items can be dried.  
ƵThe dryer can only dry the laundry that has been spun dry. Do not put too  
wet laundry into the machine;  
ƵEmpty all pockets of the laundry with items such as keys and coins and  
remove the adornment that is not suitable to be dried;  
ƵPull up zippers, sew and mend up loosened fasteners and tie up  
dispersed ribbons to prevent the laundry from being entangled. If  
necessary, put small items into a net.  
ƵTo achieve a better drying result, load garment loosely into drum.  
Load to dry  
Check care labels inside the garments.  
CARE LABELS YOU MAY FIND ON YOUR FABRICS:  
Dry at normal  
temperature  
Dry at  
reduced temperature  
Do not  
tumble dry  
Warning: Do not tumble dry woollen or wool mixture articles unless the article  
is labelled to be suitable due to a possibility of shrinkage.  
 
Control panel  
Control panel  
*
+
,
G - Programme progress display  
Depending on the programme selected, the drying stage reached is  
shown by the indicator lamps on the control panel:  
- Drying  
- Ready to iron  
- Airing  
- End/Anti-crease  
)
(
'
%
-
&
$
At the end of a programme,the End/Anti-crease indicator lamp comes on.  
The drum will continue to rotate at intervals to prevent laundry creasing, if you  
do not wish to remove it immediately.  
A - Program selector  
Turn this knob to choose the drying program you desire. This type of dryer  
has 11 program options . For description of specific programs, refer to the list of  
programs on Page 10. When the drying program is selected,the relevant indicator  
light is on.  
H - LED screen  
The screen displays the remaining time for a program, the delay time and  
other related information.  
Note: The remaining time to start a program is the default time for the  
program. During operation, with variation of factors such as the moisture  
content. The actual remaining time will be automatically adjusted until the preset  
drying result has been achieved and the program is complete.  
B - Start/Pause button  
Gently touch this button to start the dryer. Gently touch this button again  
during the operation of the dryer and the indicator light and display screen will  
flash and the machine will be paused .Press the button again and the program  
will continue .  
I - Maintenance displays  
- Empty tank  
C - Signal button  
When the drying cycle has finished, an intermittent acoustic signal will  
sound.Touch this button,the buzzer will be canceled.  
- Clean filter  
- Clean condenser  
Important: After each drying cycleˈ  
D- Anti-crease button  
– Clean the filter˗  
If this additional function is selected, the anti-crease phase at the end of  
the drying cycle is lengthened by 60 minutes. The laundry can be removed  
at any time during the anti-crease phase.  
– Drain the condensed water container˗  
(See section “Cleaning and maintenance”)  
J -Power button  
in  
E - Delicate button  
During this program, the drying temperature and power will decrease and  
the drying time will increase to take better care of the delicate laundry.  
D+E composite button and child lock function  
F- Delay button  
During a program, press and hold down both buttons for 3 seconds to  
set up the child lock function if necessary. At this time, The display screen  
shows the remaining time and the lock alternatively, and the control panel will  
lock. Press and hold down both buttons for 3 seconds once again and the child  
lock will release.When the program ends or during a power failure the child lock  
will release.  
Gently touch this button before the program starts. You may choose to start  
the dryer after a preset time. The delay range is between 1 and 19 hours.  
Every touch of the delay button will increment by one hour. When you pass 19  
hours, the delay time will turn off. After a delay time is set, gently touch the  
Start/Pause button to the start the delay operation and the indicator light will  
flash.  
 
Programming guide  
Drying methods  
1.Turning on power  
Type of Laundry  
Max. load  
Program  
Degree of drying  
Insert the power plug into an appropriate wall socket and turn on the power.  
.
Operating power supply: (220-240)V/50Hz.  
COTTON  
Heavy cotton fabrics, sheets,  
gowns.  
Extra dry  
Ready to wear  
Ready to iron  
Damp  
7 kg  
Very dry  
2. Laundry loading  
Reference weight of fabrics for drying  
Open the door and place the  
ꢄƽJeans ꢇꢈꢆꢆ  
g
ƽ
(cotton appr 950g)  
Overalls  
laundry into the drum of the dryer  
.
*
Normal  
7 kg  
7 kg  
7 kg  
Cotton fabrics, sheets, coats  
Ordinary cotton fabrics  
Ordinary cotton fabrics  
To save energy and achieve a better  
ƽ Pajamas  
ƽ Blended fabric  
(appr 200g)  
drying result, please spin the laundry as  
dry as possible. Place the laundry evenly  
into the drum after shaking them loose.  
Note: Do not put excess laundry into  
the dryer to avoid damage to the dryer  
and laundry.  
Slightly  
damp  
clothes  
ꢄꢄ ꢄ  
ƽShirts  
(appr 800g)  
(appr 300g)  
ƽ
(appr 300g)  
T-shirt  
Underwear  
( appr 70g)  
ƽ
Damp  
ƽ Socks  
(blended fabrics  
ƽ Jackets (cotton  
appr 50g)  
appr 800g)  
ƽ Single bed sheets  
ƽ Woolen blankets  
(cotton appr 800g)  
SYNTHETIC  
(appr 3000g)  
3. Setting drying program  
Turn the program knob to set an optimal drying program according to the  
laundry type and the drying result required.  
3 kg  
3 kg  
Ready to wear  
Ready to iron  
Normal  
Damp  
Ordinary synthetic fabrics  
Ordinary synthetic fabrics  
4. Selecting additional functions  
TIMER  
According to your desire, select from the additional functions:  
- Start Delay,- Delicate,- Anti-crease,- Signal Off.  
Timer 20 min  
Timer 40 min  
7 kg  
7 kg  
7 kg  
20 min  
40 min  
60 min  
Heavy fabrics, needing  
further drying.  
5. Program operation  
After a program is set, gently touch the Start/Pause button to start the  
program  
Timer 60 min  
6. Program completion  
SPECIAL PROGRAMS  
Before the drying program ends, the dryer will enter the cold air cycle.  
After the program is complete, the display screen will display "End." Open  
Cool  
Mix  
the door to remove the laundry.If the laundry is not removed after the drying  
.
Refresh/Airing  
One piece  
7 kg  
/
/
program is complete,the dryer will start the anti-crease protection cycle  
automatically.In the anti-crease protection cycle, the dryer's drum will run at  
a set interval to keep your laundry loose.  
0.5 kg  
* Programme setting for testing in accordance with EN 61121.  
7. Turning off the dryer  
Press the power keystroke to switch off the power supply and turn off the  
dryer at the wall socket.  
 
ꢅꢆ  
ꢅꢅ  
Cleaning and maintenance  
Cleaning and maintenance  
1Cleaning the surface  
-Using a coin or other tool, push the slides on the cover to the position  
as shown in the figure and then remove the cover;  
-Turn the condenser's handle 90 degrees in the direction as shown in  
the figure;  
Wipe the body of the dryer and the control panel with a damp cloth.  
Remember not use any organic solvent or corrosive agent to avoid  
damage to the machine.  
-Remove the condenser from the dryer;  
2. Cleaning the filter screen  
-Clean the condenser with a brush or flush with a water jet;  
Note: Do not use a sharp tool in cleaning the heat exchanger, because  
it may damage its sealing performance;  
-Put the condenser back in place and lock up the cover;  
-Put the lower decor panel back in place.  
To ensure a good ventilation during drying,  
the filter screen must be cleaned after every  
drying program is complete.  
Open the door and remove the filter screen  
from the machine. Open the screen and clean  
off the dust on the screen with a damp cloth or a  
soft brush.  
After cleaning, put the screen back in place.  
D
B
C
3. Emptying the water collection container  
During operation , steam condenses into  
container  
and is collected in the container .The  
water  
must be emptied after the program is complete.  
-Hold the handle and pull the container outwards to  
remove it. Keep it level to prevent the water  
from overflowing;  
-Pour away water. Note: the  
water can not be used for drink or for food  
processing;  
5. Cleaning the drum  
After the dryer has operated for  
a time, fabric caring agents or  
calcium contained in the water will  
form an almost invisible layer on  
the inside of the drum.  
-Put the container back in place.If the container has  
been emptied, the dryer will sound an alarm  
not  
when the containeris full. The indicator light comes  
on while the container is emptied and the dryer will  
stop. It will not restart until the container is emptied.  
This makes the dryer not able to  
reliably and accurately identify the  
dryness of the laundry. So the inside  
of the drum, especially the stainless  
steel pieces on the blades must be  
cleaned regularly with a wet cloth.  
A
4.Cleaning the condenser  
The condenser must be cleaned monthly.  
Switch off the power supply before cleaning.  
-Hold the protrusions on both sides of the  
lower decor panel and open it.  
 
ꢅꢆ  
ꢅꢈ  
Trouble shooting  
Trouble shooting  
Prompt and Alarm Information  
The following must be confirmed before calling for service:  
In case of an improper operation or problem with the machine when it  
operates, the code corresponding to the problem will be displayed on the  
screen:  
Problem  
Possible Cause  
● Is the power supply plugged in and switched on.  
● Plug another appliance into the wall socket to  
test if there is power.  
● Check if a drying program has been set;  
● the Start/Pause button has been pressed;  
● The water collection box is full;  
Cause  
Code  
E2  
Category  
Solutions  
There is no change in  
the temperatures of  
the laundry in the tub  
The thermal sensor  
open-circuited or short  
circuited  
Contact a professional  
serviceman  
The dryer does not  
switch on  
Trouble code  
E5  
E6  
Contact a professional  
serviceman  
Trouble code  
Trouble code  
Is the door closed tightly;  
The loaded laundry has reached the requirements  
for the drying setting.  
The dryer does not  
switch on and the  
screen displays "End"  
Contact a professional  
serviceman  
Drain pump fails  
Is there a load in the drum.  
●Have you selected the correct drying option;  
●Has the filter screen been cleaned ;  
●Is the condenser blocked;  
● Does the amount of the loaded laundry  
exceed the rated load;  
● Has the loaded laundry been spun dry;  
●Is the vent duct blocked;  
The drying result is  
not up to standard  
and the drying cycle  
takes too long.  
● Does the surface of the inside of the drum  
have a deposit layer forming, if so clean the  
drum interior;  
The remaining time will be adjusted and corrected  
continuously and automatically based on the  
following factors:  
●Type of laundry;  
●Loaded amount;  
●The moist degree of laundry;  
●Ambient temperature;  
The remaining time  
display is halted, or the  
remaining time displayed  
is skipping  
The automatic adjustment is a normal operation.  
 
ꢅꢊ  
ꢅꢉ  
Wiring circuit  
Specifications  
Type  
HDY-C70/HDY-C70 ME  
(220-240)V/50Hz  
Item  
Power supply  
K1  
NTC  
K3  
H
K2  
N
G
L
FA  
Maximum operating current(A)  
12  
Rated load(kg)  
Drying program  
7
11  
PCB1  
PCB2  
2800  
Maximum power(W)  
Dimensions(H×D×W)mm  
855h620h595  
IPX4  
R1  
R2  
P
S
Waterproof level  
M
L
T1  
T2  
FA-Electromagnetic interference inhibitor  
R1ˉHeating1  
R2ˉHeating2  
T2ˉThermostat  
MˉMotor  
LˉLamp  
NTCˉTemperature sensor  
HˉHumidity sensor  
T1ˉ Thermal cut-out  
PSˉDrainage pump  
K1ˉ Door switch  
K2ˉ Level switch  
K3ˉ Power switch  
PCB1ǃPCB2ˉPrinted circuit board  
ꢅꢋ  
 
ꢅꢊ  

Grizzly Sander P9933021 User Manual
Grundig Flat Panel Television PHDQ 2002 BC User Manual
Grundig Gas Heater GS350DL User Manual
Haier Microwave Oven HR 7857A User Manual
Harman Kardon Home Theater System 232 EX 240 HD User Manual
Honeywell Water Heater 238 47759 00 User Manual
HP Hewlett Packard Welding System 34521 User Manual
iHome Speaker System IHM60EN User Manual
Impex Home Gym EVE 840 User Manual
Impex Home Gym TSA 5761 User Manual