Quick Start Guide
DT07-10U1 9.6" Liquid Crystal Display TV
This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.
Front View
Rear View
Channel
select
Volume
adjust
Power indicator LED
Making Connections
Connecting to Antenna/Cable TV
A/V and Channel Setup
Watching Broadcast or Cable TV
Volume Up
Channel Up
Channel Down
1. Connect one end of the VHF/UHF
(Antenna) or CATV cable to ANT
Jack (VHF/UHF IN Jack) on the back
of the TV.
1. After you have made the appropriate power and
source connections, press the power button to
turn on your television
Menu
2. Press the TV/AV button to select TV.
3. Press the MENU button on the
control panel to enter the OSD menu.
Volume Down
2. Connect the other end of the
VHF/UHF (Antenna) or CATV cable
to the Antenna or CATV socket.
4. Press the
button to select the TV setting.
TV/AV
Remote IR sensor
cator
5. Press the MENU button.
6. Press the
button to select TV/CATV.
Powe
r indi
LED
Selecting A/V Sources
Connecting to a VCR, VCD, DVD Player, or Video Game Console
1. Make sure your TV is turned on and a
device such as a DVD player is connected.
1. The illustration presented
here shows you how to
connect your TV to a
2. The cables are
color-coded (black,
red, white, yellow).
Connect each color-
coded cable to
2. Press the TV/AV button on the
control panel to select different source signals.
TV/CATV channel number, AV1 or AV2 appear
on the screen.
VCR
VCD
DVD
VCR, VCD, DVD player
or video game console.
the appropriate
connector on your
device.
4-IN-1 A/V jack
Auto Channel Setup
B
R
W
Y
Video game console
1. Press the MENU button to enter the OSD menu.
B
AV
connectors
R
2. Use the channel buttons on the control panel to select the “TV Setting” menu.
3. Press the MENU button to enter the TV Setting menu.
W
Y
4. Press channel buttons to select Auto Program.
5. Press the MENU button to enter the Auto Program Setting submenu.
6. Press channel buttons to select ON or OFF and press the MENU button.
7. Your television will begin automatically memorizing the available channels.
Connecting the Power Adapter
1. Connect the power cord to the power
adapter as illustrated.
Auto Program
2. Plug the power adapter connector into
the DC-IN input jack on the rear panel
of the TV.
TV Setting
+
CH
A
M
-
3. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
Auto Program
ON
OFF
Note : For information on connecting your
TV to a computer, refer to the user's
manual.
Copyright 2004, Hannspree California, Inc. All rights reserved.
MAD-001139
|