Grundig Pet Fence CDS 6580 SPCD User Manual

HIFI MICRO  
SYSTEM  
Ovation  
CDS 6580 SPCD  
DEUTSCH  
ENGLISH  
FRANÇAIS  
ITALIANO  
PORTUGUÊS  
ESPAÑOL  
 
____________________________________________  
CONTENTS  
3
4
Set-up and safety  
Magic Fidelity. The sound concept from Ovation  
Overview  
The hi-fi system controls  
The hi-fi system displays  
The remote control  
12  
15  
Connection and preparation  
Settings  
Setting the time  
Tuning and storing radio position  
Reset  
18  
20  
General functions  
Tuner mode  
Selecting the TUNER input source  
Selecting a preset station  
Stereo/mono reception  
Automatic station search (ASP)  
RDS station service  
23  
CD mode  
Selecting the CD input source  
Inserting a CD  
Playing back a CD  
Repeating the current file or track  
Selecting another file or track  
Searching for a passage within a file or track  
Selecting albums and files (MP3 only)  
Calling up track information (MP3 only)  
Repeating a file or a track (Repeat One)  
Repeating all the files on an album (MP3 only)  
Repeating all files or tracks (Repeat All)  
Playing back files or tracks in random order (Random)  
Playing the introductions of files or tracks (Intro)  
Creating a track memory  
30  
33  
Timer mode  
Switch-on timer  
Reminder timer  
Sleep timer  
Information  
Cleaning the CD unit  
Technical data  
Environmental note  
General instructions for laser devices  
Troubleshooting  
2
 
___________________________  
SET-UP AND SAFETY  
Please note the following information when setting up the system:  
10  
cm  
10  
cm  
10  
cm  
The hi-fi system is designed for the playback of audio signals. Any other use  
is expressly prohibited.  
10  
cm  
CD  
TUNER/  
BAND  
ǵ
Ovation  
UP  
TUNING/  
ALBUM  
DOWN  
If you want to set up the hi-fi system on wall shelves or in cupboards, please  
ensure that it is adequately ventilated. There must be at least 10 cm of space  
at the side, above and behind the hi-fi system.  
Please note when setting up the hi-fi system that furniture surfaces are coated  
with various types of paint and plastic, which often contain chemical  
additives. These additives may cause corrosion to the feet of the unit. This  
may leave stains on the surface of the furniture which can be difficult or  
impossible to remove.  
°C  
°C  
2h  
CD  
TUNER/  
BAND  
ǵ
Ovation  
UP  
TUNING/  
ALBUM  
DOWN  
ǵ
Ovation  
If the hi-fi system is exposed to sudden changes in temperature, for example  
when taken from the cold into a warm room, wait at least two hours before  
using it.  
CD  
TUNER/  
BAND  
ǵ
Ovation  
UP  
TUNING/  
ALBUM  
DOWN  
The hi-fi system is designed for use in dry rooms. If you do use it outside,  
please ensure that it is protected from moisture, such as rain or water  
splashes.  
Do not place the hi-fi system close to heating units or in direct sunlight,  
as this will impair cooling.  
Do not place any vessels containing liquids, such as vases, on the hi-fi  
system. Do not insert any foreign bodies in the CD compartment. Do not  
place any objects such as burning candles on the hi-fi system.  
CD  
TUNER/  
BAND  
ǵ
vation  
O
UP  
TUNING/  
ALBUM  
VICE !  
DOWN  
! SER  
Do not open the hi-fi system casing under any circumstances. Warranty  
claims are excluded for damage resulting from improper handling.  
Thunderstorms are a danger to all electrical devices. Even if the hi-fi system  
is switched off, it can be damaged by a lightning strike to the mains or the  
antenna cable. Always disconnect the mains and antenna plugs during a  
storm.  
TUNER/  
BAND  
ǵ
vation  
O
UP  
TUNING/  
ALBUM  
DOWN  
Magic Fidelity.  
The sound concept from Ovation.  
Magic Fidelity is a new, three-channel active loudspeaker system developed  
and patented by Grundig, which produces powerful and brilliant sound.  
A bass speaker as well as two medium and treble speakers, each in their  
own casing, create an outstanding sound experience.  
3
 
____________________________________________  
OVERVIEW  
The hi-fi system controls  
CD  
TUNER/  
BAND  
ǵ
vation  
O
UP  
TUNING/  
ALBUM  
DOWN  
Controls on the front  
Tuner mode  
TUNER/BAND  
Switches on the hi-fi system with the input source  
»TUNER«, selects the input source »TUNER«;  
selects the waveband »FM« or »MW«.  
TUNING/ALBUM  
UP – DOWN  
Press and hold down to start the station search;  
press briefly to change the frequency in small  
steps.  
$
s6  
Select stored radio stations.  
5a aa  
CD mode  
Front panel  
Fold to the front to open the CD compartment.  
When the compartment is closed the hi-fi system  
switches on from standby automatically.  
CD II  
Switches the hi-fi system on with the »CD« input  
source, selects the »CD« input source;  
ı
activates CD playback and pauses playback.  
TUNING/ALBUM  
UP – DOWN  
In MP3 mode: select the next or previous album.  
4
 
____________________________________________  
OVERVIEW  
VOLUME  
ǵ
$ s6  
5a aa  
In MP3 and CD-DA mode: pressing briefly selects  
the next file or the next track; holding down  
searches for a particular passage.  
In MP3 and CD-DA mode: pressing briefly selects  
the previous file or the previous track; holding  
down searches backwards for a particular  
passage.  
7
Ends CD playback;  
pressing twice deletes the track memory for the  
CD.  
Controls on the top  
General information  
ON/OFF  
Switches the device to and from standby mode.  
The device is only fully disconnected from the  
mains after the plug has been pulled out.  
SLEEP  
For setting the sleep timer.  
Interrupts the alarm function.  
Adjusts the volume.  
SNOOZE  
+
– VOLUME  
5
 
____________________________________________  
OVERVIEW  
VOLUME  
ǵ
DSC  
Selects the sound settings USER, CLASSIC, POP,  
JAZZ and ROCK;  
adjusts the equaliser (BASS or TREBLE).  
UBS  
Switches the Ultra Bass System on and off.  
AUTO DIMMER  
Sensor. Automatically adjusts the back light of the  
display to the brightness of the room.  
6
 
____________________________________________  
OVERVIEW  
FM  
ANTENNA  
MW ANTENNA  
AUX  
Controls on the sides  
AC ~  
Socket for mains cable (left side of the device).  
The only way to isolate the hi-fi system from the  
mains supply is to pull the plug out.  
AUX  
Audio signal input for an external device on the  
right hand side.  
y
Headphone socket for connecting a stereo head-  
phone set with a jack plug (ø 3.5 mm) on the right  
side of the device.  
The speakers of the hi-fi system are automatically  
switched off.  
FM ANTENNA  
MW ANTENNA  
Antenna socket for the rooftop antenna or the  
wire antenna supplied.  
Antenna socket for connecting the MW frame  
antenna supplied.  
Controls on the bottom  
RESET  
Resets the hi-fi system in case of malfunction.  
Press »RESET« to reset, using an implement such  
as a paper clip.  
7
 
____________________________________________  
OVERVIEW  
The hi-fi system displays  
000:000  
In standby mode: displays the time.  
In tuner mode: displays the preset station.  
In MP3 mode: displays the total number  
of albums and files, and the elapsed  
playing time of the current file.  
In CD-DA mode: displays the total  
playing time, and the elapsed  
N
N
X
Y
V
C
B
USER  
CLASSIC POP  
PM  
JAZZ ROCK UBS  
w
ALBUM  
FILE  
playing time of the current track.  
:
000000.00 In standby mode: displays the day of  
the week.  
000 000  
1
ALL  
M
INTRO RANDOM PROG  
In tuner mode: displays the wavelength  
and the frequency or the station name.  
In MP3 mode: displays the disc format  
and the number of the current file.  
In CD-DA mode: displays the disc for-  
mat, the total number of tracks and the  
number of the current track.  
ALBUM  
R
II  
ɳ
kHz  
MHz  
000000.00  
f
PTY TEXT NAP  
JAZZ V  
Displays the selected sound setting,  
for example »JAZZ«.  
WEC  
e
ɷ
љ
B
The Ultra Bass System is activated.  
ALBUM  
In MP3 mode: displays the total number of albums or the  
number of an album.  
PM  
Displays the second half of the day in 12-hour format.  
FILE  
In MP3 mode: displays the total number of files or the  
number of an file.  
w
In tuner mode: flashes when awaiting an RDS time signal;  
lights up when RDS time synchronisation is complete.  
M 1  
In MP3 and CD-DA mode: a file or a track is repeated.  
In MP3 and CD-DA mode: all files or tracks of a CD are  
repeated.  
M ALL  
M ALBUM  
In MP3 mode: all files on an album are repeated.  
In MP3 and CD-DA mode: the first ten seconds of each file  
or track are played.  
INTRO  
8
 
____________________________________________  
OVERVIEW  
RANDOM  
In MP3 and CD-DA mode: all files or  
tracks are played back in random order.  
N
N
X
Y
V
C
B
PROG  
In tuner mode: a stored radio station is  
selected or played.  
In MP3 and CD-DA mode: a track  
memory is created or played back.  
USER  
CLASSIC POP  
PM  
JAZZ ROCK UBS  
w
ALBUM  
FILE  
ɳ
In tuner mode: an FM stereo station is  
being received.  
:
000 000  
1
ALL  
M
INTRO RANDOM PROG  
kHZ  
MHz  
R
In tuner mode: in combination with the  
MW frequency indicator.  
ALBUM  
R
II  
ɳ
kHz  
MHz  
In tuner mode: in combination with the  
FM frequency indicator.  
000000.00  
In MP3 and CD-DA mode: a CD is  
played back.  
f
e
PTY TEXT NAP  
WEC  
ɷ
љ
II  
In MP3 and CD-DA mode: CD playback  
is interrupted (pause).  
f
PTY  
In tuner mode: an RDS station is being received.  
In tuner mode: the PTY (station type) function is activated.  
In tuner mode: the radio text function is activated.  
The reminder timer is activated.  
TEXT  
NAP  
e
In timer mode: the signal alarm function is activated.  
In timer mode: the radio or CD alarm function is activated.  
ɷ
WEC  
In timer mode: the alarm function is deactivated at the  
weekend.  
O
The sleep timer is activated.  
9
 
____________________________________________  
OVERVIEW  
The remote control  
ON/OFF  
Switches the hi-fi system to standby mode and  
from standby mode to the last signal source  
selected.  
CD II  
Switches the hi-fi system on with the »CD« input  
source, selects the »CD« input source;  
In MP3 and CD-DA mode: starts and pauses CD  
playback.  
ı
ON /OFF  
CD  
TUNER/  
BAND  
7
In MP3 and CD-DA mode: ends CD playback  
pressing twice deletes the track memory for the  
CD.  
AUX  
s6  
5a  
In tuner mode: selects stored radio stations.  
In MP3 or CD-DA mode: pressing briefly selects  
files or tracks forwards or backwards; pressing  
and holding down searches forwards or back-  
wards for a particular passage.  
FM MODE  
INTRO/REP.  
TUNING/  
ALBUM  
PTY  
PROG./RAND.  
DSC  
UBS  
DSC  
Selects the sound settings USER, CLASSIC, POP,  
JAZZ and ROCK;  
adjusts the equaliser (BASS or TREBLE).  
COLOR  
SLEEP  
BRIGHTNESS  
DISPLAY  
UBS  
+
Switches the Ultra Bass System on and off.  
Adjust the volume.  
NAP  
WEC  
}
TUNER/BAND  
Switches on the hi-fi system with the input source  
»TUNER«, selects the input source »TUNER«;  
selects the waveband »FM« or »MW«.  
SNOOZE  
TUNING/ALBUM  
In tuner mode: holding and pressing down  
starts the station search; briefly pressing changes  
the frequency forwards or backwards in steps.  
In MP3 mode: selects albums forwards or back-  
wards in steps.  
c
x
PTY  
In tuner mode: calls up the current station type  
(PTY); selects the station type (PTY) for PTY search.  
COLOR  
Selects the colour of the display back light  
(8 colours).  
BRIGHTNESS  
Changes the brightness of the display to one of  
three levels (bright, medium, off).  
10  
 
____________________________________________  
OVERVIEW  
DISPLAY  
In tuner mode: switches the display between fre-  
quency, station name, station type, radio text and  
time/day.  
In CD-DA mode: switches the display between  
track number/elapsed playing time, remaining  
track playing time, total remaining running time  
and time/day.  
In MP3 mode: switches the display between file  
number/elapsed playing time, file name/ID3 tag  
information (ticker text) and time/day.  
ON /OFF  
CD  
TUNER/  
BAND  
AUX  
p
Switches the hi-fi speakers to and from mute  
mode.  
FM MODE  
INTRO/REP.  
TUNING/  
ALBUM  
AUX  
Switches the hi-fi system on with the »AUX« input  
source, selects the »AUX« input source (external  
device).  
PTY  
FM MODE  
In tuner mode: switches between mono and stereo  
reception.  
PROG./RAND.  
DSC  
UBS  
COLOR  
INTRO/REP.  
ѕ
In MP3 and CD-DA mode: plays the introduction  
to the files or tracks on a CD; repeats a file or  
track, all files or tracks of a CD or all files of an  
album.  
In stand-by mode: sets the switch-on time and the  
alarm clock.  
SLEEP  
BRIGHTNESS  
DISPLAY  
NAP  
WEC  
PROG./RAND.  
Ȅ
In tuner mode: stores radio stations.  
In MP3 and CD-DA mode: saves files or tracks for  
track memory; plays back files or tracks in random  
order.  
SNOOZE  
In stand-by mode: for setting the time and day  
manually.  
SLEEP  
NAP  
WEC  
For setting the sleep timer.  
In standby mode: for setting the reminder timer.  
Interrupts or reactivates the alarm function for the  
weekend.  
SNOOZE  
Interrupts the alarm function for about 5 minutes;  
interrupts the reminder timer.  
11  
 
_
CONNECTION AND PREPARATION  
Connecting the antenna  
1
Plug the rooftop antenna cable into the »FM ANTENNA«  
antenna socket on the hi-fi.  
FM  
ANTENNA  
TV  
R
Note:  
MW ANTENNA  
AUX  
If no rooftop antenna is available, use the auxiliary antenna  
supplied. This antenna provides reasonably good reception of  
local FM (VHF) stations. Do not shorten the auxiliary antenna.  
2
Plug the wire frame antenna into the »MW ANTENNA«  
socket on the hi-fi system. Adjust the position of the wire frame  
antenna until you get the best reception.  
Connecting an external device  
1
Connect the audio input sockets of the external device to the  
»AUX« socket on the right side of the hi-fi system with a stereo  
jack plug (ø 3,5 mm).  
FM  
ANTENNA  
Note:  
MW ANTENNA  
AUX  
Switch the hi-fi system off before you connect external devices.  
Connecting the headphones  
1
Insert the headphone plug (ø 3,5 mm) into the »y« socket on  
the right side of the hi-fi.  
– The loudspeakers of the hi-fi system are switched off.  
AUX  
Connecting the power cord  
Note:  
Check that the mains voltage on the type plate (on the bottom of  
the hi-fi system) corresponds to your local mains supply.  
The only way to disconnect the hi-fi system from the mains  
supply is to pull the plug.  
1
2
Plug the mains cable supplied into the »AC ~« socket on the  
hi-fi system.  
Plug the power cord into the wall socket.  
12  
 
_
CONNECTION AND PREPARATION  
Inserting batteries in the remote control  
1
Open the battery compartment by pushing down its lid.  
2
When inserting the batteries (2 x 1.5 V, R 6/UM 3/AA),  
observe the polarity marked on the base of the battery com-  
partment.  
Note:  
If your hi-fi system no longer reacts properly to remote control  
commands, the batteries may be flat. Always remove used bat-  
teries. The manufacturer accepts no liability for damage result-  
ing from leaking batteries.  
Environmental note:  
Batteries, including those which contain no heavy metal, should  
not be disposed of with household waste. Please dispose of  
used batteries in an environmentally responsible manner. Find  
out about the legal regulations which apply in your area.  
13  
 
_
CONNECTION AND PREPARATION  
Additional information for units sold in the UK.  
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains  
supply.  
The range of multi-system receivers is built to work in most European coun-  
tries. However, the mains plug and socket system for the UK differs from  
many European countries.  
This appliance has been supplied with a fitted, non-removable, approved  
converter plug for use in the UK. This converter plug is fitted with a 5A rated  
fuse.  
In case this appliance is supplied with a moulded 2-pin Euro plug only,  
which is unsuitable for UK operation, this must be cut off and immediately  
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a  
qualified electrician.  
Note:  
The severed Euro plug must be destroyed to avoid a possible shock  
hazard should it be inserted into a socket elsewhere.  
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is  
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any  
other type of plug is used it must be protected by a 5A fuse either in the  
plug, or at the distribution board. If this type of plug becomes defective,  
ensure that the fuse is removed before disposal, to eliminate potential shock  
hazard.  
If it is necessary to change the fuse in the non-rewireable plug, the correct  
type and rating (5A ASTA or BSI approved BS1362) must be used and the  
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and  
plug must not be used until a replacement is obtained. Replacement fuse  
covers should be obtained from your dealer.  
Important:  
The wires in the mains lead are colour coded in accordance with the follo-  
wing code:  
BLUE – NEUTRAL  
BROWN – LIVE  
As the colours of the wires in the mains lead of your appliance may not cor-  
respond with the coloured marking identifying terminals in your plug, pro-  
ceed as follows:  
Connect the BLUE coloured wire to plug terminal marked with the letter “N”  
or coloured black.  
Connect the BROWN coloured wire to the plug terminal marked with the let-  
ter “L” or coloured red.  
In no circumstance must any of the wires be connected to the terminal mar-  
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-  
low.  
Replacement mains lead sets can be obtained from your local dealer, or by  
contacting Grundig Consumer Relations (01788 570088)  
Moulded 3-pin lead set, suitable for UK use:  
Ref: Leadset UK  
8290-991-224  
Moulded 2-pin Euro lead set, not suitable for UK use:  
Ref: Leadset Euro  
8290-991-316  
14  
 
______________________________________________  
SETTINGS  
Setting the time  
A demo programme starts when you connect the hi-fi system to the  
mains for the first time. To end the demo programme switch the hi-fi  
system to stand-by mode by pressing »ON/OFF« briefly. Now the  
time and day displays will flash, indicating that they need to be set.  
The following settings may only be performed in standby mode.  
PM  
:
1
To set the 12-hour format, briefly press »PROG./RAND./Ȅ«.  
– Display: briefly »12HR«, then the current time, for example  
»PM MON 12:02« (»PM« for the second half of the day).  
12 02  
MON  
2
To set the 24-hour format, press »PROG./RAND./Ȅ« again.  
– Display: briefly »24HR«, then the current time, for example  
»MON 0:03«.  
3
4
To set the time, press and hold down »PROG./RAND./Ȅ«.  
– Display: the hours flash.  
:
0 03  
MON  
c
x
Set the hours using »  
TUNING/ALBUM  
« and press  
»PROG./RAND./Ȅ« to confirm.  
– Display: the minutes flash.  
:
12 03  
c
x
5
6
7
Set the minutes using » TUNING/ALBUM « and press  
»PROG./RAND./Ȅ« to confirm.  
MON  
– Display: the day of the week flashes.  
c
x
Set the day of the week using » TUNING/ALBUM « and  
press »PROG./RAND./Ȅ« to confirm.  
– Display: »CT ON« flashes.  
:
12 24  
CT ON  
c
Set the RDS time synchronisation with  
»
TUNING/  
x
ALBUM « and confirm with »PROG./RAND./Ȅ«.  
Notes:  
You must reset the time after a power failure or when the mains  
plug is pulled out.  
Some RDS stations transmit an RDS time signal. If the selected  
RDS programme transmits this time information, the time on the  
system is automatically updated. This takes about five minutes.  
15  
 
______________________________________________  
SETTINGS  
Setting and storing radio stations  
Automatic station search  
After the hi-fi system has been connected to the mains for the first  
time, the device in tuner mode searches for the 40 stations with the  
best reception and stores them.  
1
After connection, switch on the hi-fi system by pressing  
»TUNER/BAND«.  
– Display: »FM«, the frequency in rapid run-through and  
»PROG«.  
PROG  
02  
FM 97.55  
MHz  
– The search has started. After the search has finished, you will  
hear the station stored at preset position 01.  
Notes:  
The automatic station search can be interrupted by briefly  
pressing »7«.  
The automatic station search can be repeated any time by  
pressing and holding down »PROG./RAND./Ȅ« until the  
frequency display switches to rapid run-through. The stations  
stored previously will be deleted.  
Automatic station search  
1
2
3
Switch on the hi-fi system by pressing »TUNER/BAND«.  
– Display: »TUNER«, then the wave band and frequency or  
station name.  
16  
TUNER  
f
Press »TUNER/BAND« to select the frequency band  
(FM or MW).  
– Display: »FM« or »MW«.  
PROG  
16  
c
!
Activate the station search by pressing »  
ALBUM  
TUNING/  
ENERGY  
x
« until the frequency display changes to rapid  
f
run-through.  
– The search stops when a station is found.  
Manual station search  
1
To move the frequency forward in steps, briefly press  
c
x
»
TUNING/ALBUM « several times.  
MHz  
– The frequency changes in 50 kHz steps (FM) or 9 kHz steps  
(MW).  
FM 87.65  
16  
 
______________________________________________  
SETTINGS  
Storing stations on station positions  
1
2
3
4
Press »TUNER/BAND« to select the frequency band  
(FM or MW).  
c
Press »  
x
TUNING/ALBUM  
« to select the station you  
want to store.  
PROG  
P01  
FANTASY  
Press »PROG./RAND./Ȅ« to activate the memory function.  
– Display: both the station position »P01« and »PROG« flash.  
!
f
Select desired station position with » « or »s6 «.  
5a  
Note:  
If stations are already stored on the preset positions, they are  
overwritten when new stations are stored.  
PROG  
P02  
FANTASY  
5
6
Press »PROG./RAND./Ȅ« again to store the station.  
– Display: »PROG« and, for example, »P02«.  
!
f
To store more stations, repeat steps 2 to 5.  
Note:  
If the hi-fi is disconnected from the mains for a long time, all the  
preset stations are deleted.  
Reset  
In case of malfunction you can reset the hi-fi system.  
1
With the device on, press the »RESET« button on the bottom of  
the hi-fi system using an implement such as a paper clip.  
17  
 
________________________  
GENERAL FUNCTIONS  
Switching the hi-fi system on and off  
1
Switch the hi-fi system on from standby mode by pressing  
»ON/OFF«.  
– The last input source used is automatically selected.  
Note:  
The following buttons on the hi-fi or the remote control can also  
be used to switch on the system:  
»TUNER/BAND« – tuner mode; »CD II« – CD mode;  
ı
»AUX« – External device mode.  
:
12 24  
2
Press »ON/OFF« to switch the hi-fi system to stand-by.  
– Display: »GOOD BYE« briefly, then the current time and day of  
the week.  
GOOD BYE  
Note:  
The only way to disconnect the hi-fi system from the mains  
supply is to pull the plug.  
Adjusting the brightness of the display  
1
Change the overall brightness of the display back light using  
»BRIGHTNESS« on the remote control in three levels (bright,  
medium, off).  
– Auto dimmer adapts the brightness of the display auto-  
matically to the brightness of the surroundings.  
Changing the colour of the display lighting  
1
Change the colour of the display back light by pressing  
»COLOR« on the remote control. There are eight options.  
Selecting the input source  
1
Select the input source by pressing »TUNER/BAND«,  
»CD II« or »AUX«.  
ı
– Display: »TUNER«, »CD« or »AUX«.  
CD  
Adjusting the volume  
+
1
Adjust the volume with »– VOLUME «.  
– Display: briefly »VOL« (»MIN«, »1« to »39«, and above this  
»MAX«).  
Muting  
With this function you can switch the hi-fi speakers to and from  
mute mode.  
1
Press »p« on the remote control to switch the sound on and  
off.  
MUTE  
– Display: »MUTE« when mute is on.  
18  
 
________________________  
GENERAL FUNCTIONS  
Selecting sound effects  
You can select from the sound settings USER, CLASSIC, POP, JAZZ  
and ROCK. The basic setting is USER.  
02 V  
JAZZ  
PROG  
1
Select the sound setting by pressing »DSC«.  
!
N
N
– Display: »USER  
V« or »ROCK Y«.  
«, »CLASSIC X«, »POP C«, »JAZZ  
FANTASY  
f
Setting the equaliser  
The USER sound setting allows you to make your own personal  
equaliser settings.  
When the device is on, press »DSC« until »USERN« appears  
in the display.  
N
1
2
3
N
N
USER  
Press»DSC« again for approximately 2 seconds.  
– Display: »BASS 0«.  
BASS 0  
Press »DSC« to choose the setting (BASS or TREBLE).  
– Display: »BASS 0« or »TRE 0«.  
Note:  
If you do not press any button within five seconds, the hi-fi  
system will automatically quit this mode.  
+
4
Set the values by pressing »– VOLUME « (maximum »+6«,  
minimum »-6«).  
– The equaliser display disappears after 5 seconds.  
Switching the Ultra Bass System on and off  
B
1
Press »UBS« to switch the Ultra Bass System on and off.  
UBS  
PROG  
B
02  
– Display: »UBS  
«.  
!
FANTASY  
f
Switching the display  
In Tuner and CD mode you can switch the display to show the time  
and day.  
1
Press »DISPLAY« repeatedly on the remote control until time  
and day appear in the display.  
:
12 24  
TUE  
19  
 
_______________________________________  
TUNER MODE  
Selecting the Tuner input source  
1
Press »TUNER/BAND« to select the input source.  
– The most recently selected station is activated (Last Station  
Memory).  
PROG  
15  
!
ENERGY  
– Display: e.g. »FM 100.60« or »ENERGY«.  
f
Selecting a preset position  
1
Press »TUNER/BAND« to select the frequency band (FM or  
MW).  
PROG  
02  
2
Select the preset position in steps by pressing » « or »s6 «.  
5a  
!
– Display: »PROG« and, for example, »P02« and the frequency  
or the station name.  
VILRADIO  
f
Stereo/mono reception  
When the hi-fi system receives FM stereo stations, »ɳ« appears in  
the display. If the signal from the FM stereo station is weak, you can  
improve the sound quality by switching to mono reception.  
1
Press »FM MODE« on the remote control to switch to mono  
reception.  
– Display: »ɳ« disappears.  
2
To switch back to FM stereo, press »FM MODE« on the remote  
control.  
PROG  
02  
!
– Display: »ɳ«.  
FANTASY  
f
Note:  
If the hi-fi is set to stereo reception and is receiving a mono  
signal, the »ɳ« display flashes.  
Automatic station search  
By starting the automatic station search, you can delete all the  
existing preset stations and replace them with new stations at the  
same time.  
1
Start the automatic search in tuner mode by pressing and  
holding down »PROG./RAND./Ȅ«.  
– After the search has finished, you will hear the station stored  
at preset position 01.  
PROG  
03  
FM 93.25  
MHz  
Note:  
The automatic station search can be interrupted by briefly  
pressing »7«.  
20  
 
_______________________________________  
TUNER MODE  
RDS station service  
RDS (Radio Data System) is an information system which is trans-  
mitted additionally by most FM stations.  
When the hi-fi system is receiving an RDS station, the station name,  
for example »FANTASY«, and »f« appear in the display.  
Note:  
It may take some time before all the RDS information is  
available.  
Searching for RDS stations  
c
1
To search for an RDS station, press » TUNING/ALBUM  
x
« repeatedly until »f« appears in the display indicat-  
PROG  
02  
!
ing that an RDS station is being received.  
– After a short time the station name appears if the reception  
strength is sufficient.  
FANTASY  
f
RDS time synchronisation  
Some RDS stations transmit an RDS time signal. If reception is good,  
this time information will update the time if you have selected the  
»CT ON« option.  
Time synchronisation can take several minutes, and even with good  
reception the accuracy depends on the time signal being transmit-  
ted. The automatic time setting is always activated when the hi-fi  
system is switched from standby mode into tuner mode and receives  
a suitable RDS station (when the system is waiting for an RDS time  
signal, » « flashes. » « stays lit once RDS time synchronisation is  
Ȅ
Ȅ
complete).  
Calling up RDS information  
When an RDS station is being received, the frequency is displayed  
briefly and then the station name appears continuously.  
1
2
3
4
5
Press »DISPLAY« on the remote control.  
– The station type appears in the display (PTY).  
PROG  
02  
!
Press »DISPLAY« on the remote control again.  
– The radio text (TEXT) appears in the display as ticker text.  
INTERNET:WWW.RADIO-FAN  
f
Press »DISPLAY« on the remote control again.  
– The current time and day of the week appear in the display.  
PROG  
02  
!
MHz  
Press »DISPLAY« on the remote control again.  
– The wavelength and the frequency appear in the display.  
FM 100.60  
f
Press »DISPLAY« on the remote control one last time.  
– The station name is displayed continuously once again.  
21  
 
_______________________________________  
TUNER MODE  
Station types (PTY)  
1
To call up the current station type, press »PTY« on the remote  
control.  
PROG  
02  
!
– Display: the current station type, e.g. »NEWS«, and »PTY«.  
– If no station type code is transmitted, »NO PTY« appears in  
the display.  
NEWS  
f
PTY  
2
3
Press »PTY« repeatedly on the remote control to select another  
station type.  
c
x
Press » TUNING/ALBUM « to start the PTY search.  
– Display: »FM«, the frequency in rapid run-through, and  
»PTY« flashes.  
:
13 20  
MHz  
FM 90.05  
– The search stops once a station of the desired station type is  
found, and the selected station type, for example »POP M«,  
and the current time appear in the display.  
PTY  
4
Press »PTY« briefly to stop the search.  
22  
 
______________________________________________  
CD MODE  
The hi-fi system is suitable for music CDs bearing the logo shown  
here (CD-DA), and for CD-Rs and CD-RWs with audio data or MP3  
formats.  
In MP3 mode, the terms “album” and “file” are very important.  
“Album” corresponds to a folder on a PC, “file” to a file on a PC or  
a CD-DA track. An MP3 CD may not contain more than 200  
albums and 500 files in total.  
The hi-fi system sorts the albums, or the files on an album, by name  
into alphabetical order. If you wish to order them differently, change  
the name of the file or album and put a number before the name.  
When burning CD-R and CD-RWs with audio files, various prob-  
lems may arise which could lead to interference in playback. This  
can be caused by faulty software or hardware settings or by the CD  
being used. Should such problems arise, contact the customer ser-  
vices of your CD burner or software manufacturer or look for rele-  
vant information, for example on the Internet. When you are mak-  
ing audio CDs, observe all legal guidelines and ensure that the  
copyright of third parties is not infringed.  
Always keep the CD compartment closed to prevent dust from col-  
lecting on the laser optics. Do not attach adhesive labels to CDs.  
Keep the surfaces of CDs clean. You can play standard 12 cm CDs  
as well as 8 cm CDs on your device. An adapter is not necessary.  
Selecting the CD input source  
1
Press »CD II« to select CD as the input source.  
– If there is no CD in the compartment, the message »NO DISC«  
appears in the display.  
ı
NO DISC  
– In MP3 mode if there is a CD already inserted: the device  
scans the content of the CD. Playback starts automatically  
with the first file of the first album.  
– In CD-DA mode if a CD is already inserted: the device scans  
the content of the CD. Playback starts automatically with the  
first track.  
23  
 
______________________________________________  
CD MODE  
Inserting a CD  
1
2
3
Open the CD tray on the hi-fi by lifting up the front panel.  
– Display: »OPEN«.  
Place the CD in the compartment with the printed side facing  
outwards.  
OPEN  
Close the CD compartment and return the front panel to its  
original position.  
– Display: »CD READ« flashes.  
ALBUM  
FILE  
– In MP3 mode: the hi-fi system scans the contents of the CD.  
The display shows the total number of albums and files, and  
the format »MP3 DISC«.  
– In CD-DA mode: the hi-fi system scans the contents of the CD.  
The display shows the total playing time, the total number of  
tracks and the format »CD«.  
009 087  
MP3 DISC  
Playing back a CD  
1
Press »CD II« to start playback.  
– Playback always starts with the first file of the first album  
(MP3) or with the first track (CD-DA).  
ı
:
1 15  
ı
– Display in MP3 mode: the number of the current file, followed  
by the file name and the elapsed playing time of the file.  
– Display in CD-DA mode: »R«, the number of the current  
track, the elapsed playing time of the track.  
001 DISC  
:
2
Use »CD II« to switch to playback pause.  
– Display: »II«, the elapsed playing time of the file or track  
flashes.  
ı
3 26  
II  
001 DISC  
3
4
Press »CD II« to resume playback.  
ı
End playback with »7« (press twice).  
Pausing and resuming playback  
1
Interrupt playback by pressing »7« once.  
2
Press » II« to resume playback at the beginning of the same  
file or track.  
ı
Note:  
Playback also resumes at beginning of the same file or track if  
you switch from CD mode to another input source and then  
back to CD mode.  
Repeating the current file or track  
1
Press »  
« briefly during playback.  
5a  
– The file or track is repeated from the beginning.  
24  
 
______________________________________________  
CD MODE  
Selecting another file or track  
1
During playback, keep pressing »  
the number of the file or track you want in the display.  
– Playback of the selected file or track starts automatically.  
« or »s6 « until you see  
5a  
:
0 01  
ı
006 DISC  
Note:  
You can also select files/tracks in stop mode.  
Searching for a passage within a file or track  
1
During playback, press »  
« or »s6 « and hold it down until  
5a  
you find the passage you want to hear.  
– If » « or »s6 « are released, playback starts.  
5a  
Note:  
During the search the volume is reduced.  
Selecting albums and files (MP3 only)  
1
During playback, select the desired album by pressing  
c
x
»
TUNING/ALBUM «.  
:
0 00  
ı
2
Select the file you want by pressing »  
– Playback of the selected file starts automatically after a short  
time.  
« or »s6 «.  
5a  
066 DISC  
Notes:  
You can also select albums and files in the stop position.  
However, an album can only be counted and selected if it  
actually contains MP3 files.  
Calling up track information (MP3 only)  
You can call up track information (ID3 tag and ticker text) with this  
function.  
1
During playback the display switches to displaying the file  
name.  
2
Press »DISPLAY«.  
You are provided with information on the track, the artist and  
the album if such information is stored on the CD.  
ı
TITLE WHISKEY IN THE JAR  
3
To return to the file name display, press »DISPLAY« repeatedly  
until the file name is displayed again.  
25  
 
______________________________________________  
CD MODE  
Repeating a file or a title (Repeat One)  
1
2
3
Press »CD II« to start playback.  
ı
Press»  
« or »s6 « to select the file or track.  
5a  
Select the repeat function by pressing »INTRO/REP./  
»M1« appears in the display.  
– The file or track is played back repeatedly.  
ѕ« until  
1
:
1 15  
M ı  
001 DISC  
4
To quit the function, press »INTRO/REP./  
the repeat symbol »M« disappears from the display.  
ѕ« repeatedly until  
Repeating all the files on an album (MP3 only)  
1
Press »CD II« to start playback.  
ı
2
Select the repeat function by pressing »INTRO/REP./  
repeatedly until the display shows: »MALBUM«.  
ѕ«  
:
2 55  
M
ALBUıM  
– All the files on the current album are played back repeatedly.  
To quit the function, press »INTRO/REP./ « repeatedly until  
021 DISC  
3
ѕ
the repeat symbol »M« disappears from the display.  
Repeating all files or tracks (Repeat All)  
1
Press »CD II« to start playback.  
ı
2
Select the repeat function by pressing »INTRO/REP./  
»MALL« appears in the display.  
ѕ« until  
– The CD is repeated from the beginning.  
:
3 24  
MALL  
ı
3
To quit the function, press »INTRO/REP./ѕ« repeatedly until  
the repeat symbol »M« disappears from the display.  
045 DISC  
Note:  
If a track memory is stored (see below), all the tracks of the CD  
inserted are repeated when the Repeat All function is called up.  
26  
 
______________________________________________  
CD MODE  
Playing back files or tracks in random order  
(Random)  
1
Press »CD II« to start playback.  
ı
2
Press »PROG./RAND./Ȅ« to select the function.  
– Display: »RANDOM«.  
RANDOM  
:
2 16  
ı
– The files or tracks on the CD are played back in random  
order.  
023 DISC  
3
To end this function, press »PROG./RAND./Ȅ«.  
– Display: »RANDOM« disappears.  
– The tracks are played back in numerical order.  
Playing the introductions of files or tracks (Intro)  
1
Press »INTRO/REP./  
– Display: »INTRO«.  
ѕ« when in stop mode.  
:
0 06  
INTRO  
ı
– Playback starts automatically. The first ten seconds of each file  
or track are played.  
002 DISC  
2
To quit the function, press »INTRO/REP./ѕ« until »INTRO«  
disappears from the display.  
– The current track and subsequent tracks are played to the  
end.  
27  
 
______________________________________________  
CD MODE  
Creating a track memory  
You can create a track memory of up to 60 files on different albums  
(MP3) or up to 60 tracks (CD-DA) for the current CD in any order  
you choose and then play them back in that sequence. A file or  
track may be stored more than once. Programming is only possible  
in stop mode.  
Selecting and storing files (MP3 only)  
1
Press »PROG./RAND./Ȅ« to call up the function.  
– Display: the album and file display »000 000«, »PROG«  
blinks.  
PROG  
000 000  
MP3 P-01  
c
x
2
Select the album with » TUNING/ALBUM «, select the  
file with »  
store.  
« or »s6 « and press »PROG./RAND./Ȅ« to  
5a  
– Display: the album and file display »000 000« appears  
again, »PROG« blinks.  
3
To store more files, repeat step 2.  
Selecting and storing tracks (CD-DA only)  
1
Press »PROG./RAND./Ȅ« to call up the function.  
– Display: track display »00« and »P-01«, »PROG« flashes.  
PROG  
P-01  
CD TK 00  
2
Select a track with »  
»PROG./RANDOM/TIME« to save it.  
« or »$s6 « and press  
5a aa  
– Display: track display »00« and »P-02«, »PROG« flashes.  
3
To store more tracks, repeat step 2.  
Playing back a track memory  
1
Start the track memory by pressing »CD II«.  
– Display: »PROG«.  
– Playback begins with the first programmed file or track.  
ı
PROG  
:
! 05  
005 003  
2
3
Press »7« to end playback.  
– Display: »PROG« flashes.  
To play the track memory again, press »CD II«.  
ı
28  
 
______________________________________________  
CD MODE  
Checking the track memory  
1
Press »PROG./RAND./Ȅ« repeatedly when in stop mode.  
– The sequence of the stored files or tracks is displayed.  
PROG  
010 004  
NF_RP--04  
Adding files or tracks  
1
In the stop position, select the file or track with »  
and press »PROG./RAND./Ȅ« to store.  
« or »s6 «  
5a  
Deleting the track memory  
1
Open the CD compartment on the hi-fi  
or  
7
press » « when the CD is in the Stop position (»PROG« mode).  
29  
 
________________________________________  
TIMER MODE  
Your hi-fi system has three timer modes:  
– The switch-on timer, which switches the hi-fi system on at the set  
time and wakes you with an alarm or music.  
– The reminder timer, reminding you by sounding the signal tone at  
a preset time.  
– The sleep timer, which switches the hi-fi system off at a preset time.  
Switch-on timer  
Setting the switch-on timer  
The time must be set on the hi-fi system. When this setting is being  
made, if no button is pushed for more than 10 seconds, the hi-fi  
system will end the process automatically. You then have to start  
again.  
:
1
With the device switched off, press and hold down  
»INTRO/REP./ «.  
– Display: » « and the hour display flashes.  
ɷ
0 00  
ѕ
CD  
ɷ
c
2
3
4
5
6
Set the hours for switching on using  
ALBUM «.  
»
TUNING/  
x
:
6 00  
»INTRO/REP./  
ѕ«.  
CD  
– Display: » « and the minutes display flashes.  
ɷ
ɷ
c
Set the minutes for switching on using »  
TUNING/  
x
ALBUM «.  
:
6 30  
»INTRO/REP./  
– Display: »BUZZER «, »TUNER  
ѕ«.  
CD  
e
« or »CD  
« flashes.  
ɷ
ɷ
ɷ
Set the input source (signal, radio station or CD) using  
c
»
x
TUNING/ALBUM «.  
Notes:  
If you select CD, make sure that a CD has been inserted.  
If you select tuner, select the radio station with »  
« or »s6 «.  
5a  
:
6 30  
7
8
»INTRO/REP./  
ѕ«.  
VOL 20  
ɷ
+
Set the volume using »– VOLUME «.  
30  
 
________________________________________  
TIMER MODE  
9
Press »INTRO/REP./ѕ« to finish the settings.  
e
– Display: » « or » «, the day and time.  
ɷ
:
14 45  
– The hi-fi system switches on at the set time with the selected  
signal source (maximum alarm duration 90 minutes).  
MON  
ɷ
Note:  
The volume of the alarm types signal, radio station and CD  
increases continually from zero onwards until an individually  
set maximum volume is reached.  
Interrupting the alarm  
1
During the alarm, press »SNOOZE« on the remote control.  
– The alarm signal (signal tone, radio station or CD) stops.  
– The alarm goes off again at 5-minute intervals (alarm  
duration – 90 minutes).  
Cancelling the alarm for the day  
1
Switch the hi-fi system off by pressing »ON/OFF« when the  
alarm is sounding.  
– The switch-on timer remains activated for the next day.  
Switching off alarm for the weekend  
You can switch off the alarm function over the weekend. The entered  
alarm times are saved.  
1
Switch off the alarm function with »WEC«.  
WEC  
– Display: »  
«.  
:
18 49  
2
Press »WEC« to reactivate the alarm function.  
– Display: »  
FRI  
WEC  
ɷ
WEC  
« disappears.  
Activating and deactivating switch-on timer  
1
To deactivate the switch-on timer, press »INTRO/REP./ѕ«  
briefly in standby mode.  
e
– Display: » « or » « disappear.  
ɷ
– The switch-on timer is deactivated, the set alarm time is  
stored.  
23:16  
TUE  
2
To activate the switch-on timer, press »INTRO/REP./  
ѕ«  
briefly in standby mode.  
e
ɷ
– Display: » « or » «.  
ɷ
31  
 
________________________________________  
TIMER MODE  
Reminder timer  
1
Press »NAP« to call up the function.  
– Display: »NAP 10« (minimum time setting), »NAP« flashes.  
:
09 34  
2
Enter the reminder time (in 10 minute intervals from 10 to 120  
minutes) with »NAP«.  
NAP 10  
NAP  
– Display: »NAP«.  
– After the set time has expired, a signal tone sounds (for max.  
90 minutes).  
– The display shows the currently remaining time, for example  
»NAP 25«, if you press »NAP« briefly.  
3
Switch off the signal tone with »ON/OFF«;  
or  
:
09 34  
interrupt the reminder timer early by setting the timer to  
»NAP 00« with »NAP«.  
NAP 00NAP  
Sleep timer  
Setting the sleep timer  
1
2
3
Switch on the hi-fi system by pressing »ON/OFF« and select  
the input source you require.  
:
23 59  
Press »SLEEP« to call up the function.  
– Display: »90 MIN«, »O« flashes.  
90 MIN  
O
Enter the required switch-off time (in 10 minute intervals from  
90 to 10 minutes) by pressing »SLEEP«.  
– Display: »O«.  
PROG  
02  
!
– The hi-fi system switches off after the selected time has  
elapsed.  
FANTASY  
O
f
Ending the sleep timer prematurely  
1
To deactivate the sleep timer, press »ON/OFF« to switch off  
the hi-fi;  
or  
:
00 12  
keep pressing »SLEEP« until »00 MIN« appears in the display  
and »O« flashes.  
– The hi-fi system remains switched on.  
00 MIN  
O
32  
 
_____________________________________  
INFORMATION  
Cleaning the CD unit  
If the device is unable to scan CDs perfectly, use a standard, com-  
mercially available cleaning CD to clean the laser optics. Other  
cleaning methods may damage the laser optics.  
To clean CDs use a lint-free cloth and wipe them in a straight line  
from the centre of the disc outwards. Do not use cleaning fluid for  
vinyl records or other solvents or scouring agents.  
Technical data  
This device is noise-suppressed according to the applicable EU directives.  
This product fulfils the European directives 89/336/EEC, 73/23/EEC and 93/68/EEC.  
This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and thereby the internation-  
al safety regulation IEC 60065.  
Do not open the hi-fi casing under any circumstances. No warranty claims are accepted for damage  
caused by incorrect handling.  
CD unit  
System  
Frequency response:  
Power supply:  
20 Hz ... 20 kHz  
Operating voltage: 230 V~  
Mains frequency: 50/60 Hz  
Max. power consumption: 35 W  
Power consumption in standby: 3.5 W  
Noise-voltage ratio:  
(wtd.) 70 dB  
MP3 features  
Amplifier unit  
Albums and files:  
Output:  
Max. 512 albums and files per CD  
Sine wave power: 2 x 3 W, 1 x 6 W  
Music signal power: 2 x 5 W, 1 x 10 W  
File system/file management:  
ISO 9660 Level 1 compatible  
Receiver unit  
Reception range:  
FM 87.5 ...108.0 MHz  
MW 522 ... 1620 kHz  
Dimensions and weight  
Device dimensions:  
W x H x D 310 x 180 x 190 mm  
Device weight: 3.3 kg  
Environmental note  
This product has been made from high-quality parts and materials which  
can be re-used and recycled.  
Therefore, do not throw the product away with normal household waste at  
the end of its life. Take it to a collection point for recycling electrical and  
electronic devices. This is indicated by this symbol on the product, in the  
operating manual and on the packaging.  
Please find out about collection points operated by your local authority.  
Help protect the environment by recycling used products.  
33  
 
_____________________________________  
INFORMATION  
General information on laser devices  
Your system is a CLASS 1 LASER PRODUCT. This means that the laser is designed in such a way as to  
ensure that the maximum permissible emission value cannot be exceeded under any circumstances.  
CLASS 1  
LASER PRODUCT  
Caution:  
If operating devices or methods other than those specified here are employed, it may lead to  
dangerous exposure to emissions.  
This device emits laser radiation. Because of the danger of eye injuries, the unit may only be opened  
or serviced by trained personnel.  
If settings other than those specified here are employed or other procedures are carried out, this may  
lead to dangerous radiation exposure.  
Troubleshooting  
Not every kind of sound interference is caused by a defect in your hi-fi system. Defects can also be  
caused by leads having been accidentally pulled out, damaged CDs and worn out batteries in the  
remote control. If the following measures do not do not rectify the problem, consult an authorised  
dealer.  
Fault  
Possible cause/remedy  
No sound.  
The volume setting is too low – increase the volume.  
The headphones are plugged in – disconnect the head-  
phones.  
The power cord is incorrectly connected. Connect it  
properly.  
Mute is activated, deactivate Mute.  
The hi-fi system does not react when  
the buttons are pressed.  
Static electrical discharge. Switch off the hi-fi system, dis-  
connect the power cable and plug it in again after a few  
seconds or press »RESET«.  
The remote control does not work.  
Poor radio reception.  
The batteries are flat. Replace the batteries.  
The remote control is out of range of the stereo.  
Weak antenna signal, check the antenna.  
Weak FM-stereo signal, switch to Mono.  
Interference from electrical devices such as televisions,  
video recorders, computers, neon lamps, thermostats or  
motors. Keep the hi-fi system away from such devices.  
Tracks on a CD are skipped.  
The CD is damaged or dirty – replace the CD or clean it.  
The PROGRAM (track memory) or RANDOM functions are  
active. Deactivate the functions.  
CD-Rs or CD-RWs are not played  
Faulty software or hardware settings during burning or the  
back, or are played back incorrectly. CD itself.  
Check the components of your CD burner/software or  
change the CD being used.  
34  
 
 

Grizzly Drill G0643 User Manual
Grizzly Switch G4573 User Manual
Harbor Freight Tools Automobile Accessories 92174 User Manual
HP Hewlett Packard Computer Drive D2D120 User Manual
HP Hewlett Packard Scanner G4000 series User Manual
HP Hewlett Packard Server tc2100 User Manual
Husqvarna Snow Blower 924HV User Manual
Hypertec Network Card Data Security Device User Manual
Hyundai Robotics Hi4aHV051001FME1 User Manual
iHome Clock Radio ZN90 User Manual