Grizzly Tool Storage T10001 User Manual

MODEL T10001

5 Shelf Unit

INSTRUCTION SHEET

Specifications

Overall Size................... 28¹⁄2"W x 10¹⁄2"D x 71"T

Shelf Size .................................28¹⁄4"W x 10¹⁄4"D

Number of Shelves............................................ 5

Inventory

Qty

A. Support Bracket ........................................ 8

B. Nut............................................................ 56

C. Bolt ........................................................... 56

D. Rail ............................................................. 4

E. Shelf ........................................................... 5

F. Foot ............................................................ 4

Assembly

After unpacking your Model T10001 shelving unit,

perform an inventory of the parts. You will need

a #3 Phillips screwdriver and a 10mm wrench to

assemble the shelves.

Begin by loosely assembling the shelf unit with

the supplied nuts and bolts. Attach one side of

the rails, then the other, making sure that the

shelves are parallel to one another as shown in

the illustration on Page 2. Once the shelf unit is

assembled, attach the feet and place it upright on

a flat level surface, then tighten all of the bolts.

If you need help with your new item, call our Tech

Support at: (570) 546-9663.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#TJ9998 PRINTED IN CHINA