Kit Instructions
Suction Kit for
Pressure Washers
3A0913A
EN
Kit 24F214: Suction Kit, 1/4 NPT
Kit 24F215: Suction Kit, 3/8 NPT
Important Safety Instructions
Read all warnings and instructions in the
pressure washer manual. Save these instructions.
ti17851a
4
3
2
1
5
Parts List
Ref. Part
Description
Qty.
1
824129 VALVE, EZ Start, 1/4 NPT (Kit 24F214)
804576 VALVE, EZ Start, 3/8 NPT (Kit 24F215)
803005 STRAINER, suction
804556 HOSE, suction
16F360 PLUG (Kit 24F214)
1
1
1
1
1
2
3
4
16F361 PLUG (Kit 24F215)
804275 HOSE, chemical injector
5
1
7. Connect chemical injector hose (5) to valve (1) at
barbed fitting.
Table 1: Wrench Sizes
Model Number
2730 DD
Wrench Size
22mm
3030 DD and 3540 DD
4043 BD
27mm
30mm
Table 2: Torque Specifications
Model Number
Torque
2730 DD
60 ft-lb (81 N•m)
73 ft-lb (99 N•m)
73 ft-lb (99 N•m)
3030 DD and 3540 DD
4043 BD
ti17848a
8. Install the suction hose (3) at the pump inlet.
Operating Instructions
1. Place the suction hose and chemical injector hose
into the water supply.
2. Start engine (see engine manual provided with
pressure washer for correct engine starting proce-
dure).
3. With nozzle removed, squeeze gun trigger so water
begins to flow from hose/gun assembly (this allows
the unit to prime and purge any air from the system).
The unit is primed once water flow is uninterrupted
by air.
ti17849a
9. Screw strainer (2) onto the end of the suction hose.
4. Once unit is primed, release trigger and lock gun in
OFF position. Securely connect desired nozzle
assembly.
NOTE: Refer to instruction manual supplied with the
unit for any further operating instructions.
ti17850a
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 3A0913
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2011, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
|