Parts
®
RoadLazer Skid-Mount OEM
Striping Package
310664D
EN
- For OEM use in customized line striper applications only -
Model 234672
Hydraulic Stainless Steel
2000 psi (138 bar) Maximum Working Pressure
Read warnings and instructions in this
manual and provided in Operation manual
308611
Related Manuals
308612 - Bead Spray Gun
308613 - Auto Spray Gun
308616 - Programmable Skipline
308974 - Pump
ti4748a
Warnings
Warnings
The following are general Warnings related to the safe setup, use, maintenance and repair of this equipment. Addi-
tional, more specific warnings may be found throughout the text of this manual where applicable.
WARNING
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
•
•
Use equipment only in well ventilated area.
Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop
cloths (potential static arc).
•
•
Keep work area free of debris, including solvent, rags and gasoline.
Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes
are present.
•
•
•
•
Ground equipment and conductive objects in work area. See Grounding instructions.
Use only grounded hoses.
Hold gun firmly to side of grounded pail when triggering into pail.
If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment
until you identify and correct the problem.
INJECTION HAZARD
High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just
a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.
•
•
•
•
•
•
Do not point gun at anyone or at any part of the body.
Do not put your hand over the spray tip.
Do not stop or deflect leaks with your hand, body, glove, or rag.
Do not spray without tip guard and trigger guard installed.
Engage trigger lock when not spraying.
Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning,
checking, or servicing equipment.
EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury.
•
Do not exceed the maximum working pressure or temperature rating of the lowest rated system
component. See Technical Data in all equipment manuals.
•
Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all
equipment manuals. Read fluid and solvent manufacturer’s warnings.
Check equipment daily. Repair or replace worn or damaged parts immediately.
Do not alter or modify equipment.
•
•
•
•
•
•
•
For professional use only.
Use equipment only for its intended purpose. Call your Graco distributor for information.
Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.
Do not use hoses to pull equipment.
Comply with all applicable safety regulations.
PRESSURIZED ALUMINUM PARTS HAZARD
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids
containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical
reaction and equipment rupture, and result in death, serious injury, and property damage.
310664D
3
Warnings
WARNING
CARBON MONOXIDE HAZARD
Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Breathing carbon mon-
oxide can cause death. Do not operate in an enclosed area.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or
swallowed.
•
•
Read MSDS’s to know the specific hazards of the fluids you are using.
Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing, or when in the operating
area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic
fumes, burns, and hearing loss. This equipment includes but is not limited to:
•
•
•
•
Protective eyewear
Clothing and respirator as recommended by the fluid and solvent manufacturer
Gloves
Hearing protection
4
310664D
Parts
Parts
RoadLazer Line Striper Kit Components
Engine
System
page 10
Pump System
page 6
Regulator
page 8
Battery System
page 12
Programmable
Skipline Controller
(manual 308616)
ti4742a
Guns
page 6
Pallet Base
page 14 and 16
310664D
5
Parts
Parts
Pump System
3-Pump System
1-Pump System
2-Pump System
72
45
29
64,120
64,119
74
64,121
86
A
117
87
174
88
B
173
C
48
47
46
50
49
93
14
90
87
89
141
55
91
192
93
46
47
51
53
A
B
200
48
201
54
C
42
40
51
79
152
2-Pump System
52
147
41
1-Pump System
39
149
94
18
21
153
22
23
23
Ti4744a
6
310664D
Parts
Pump System Parts List
Ref.
Ref.
No. Part No. Description
Qty.
No. Part No. Description
Qty.
74
79
86
87
88
89
90
91
93
94
235208 FITTING, union, swivel
191688 GUARD, belt, comp
166469 NIPPLE, pipe, hex
238782 FILTER, fluid, sst
501684 VALVE, check
166866 ELBOW, street
166846 FITTING, adapter
238967 VALVE, ball, heavy duty
220285 CAP
3
1
3
3
3
3
3
3
3
14
18
21
22
23
29
39
40
41
42
45
46
47
48
49
50
51
52
53
54
55
64
72
101566 NUT, lock
113300 BELT, vee
22
1
1
4
8
14
1
1
1
1
3
6
8
3
3
3
3
3
3
3
3
3
3
112796 COMPRESSOR, air
107129 BOLT, round head
111040 NUT, lock, insert, nylock, 5/16 in.
100004 SCREW, cap, hex hd
159239 FITTING, nipple, pipe, rdcg
112795 REGULATOR, unloader
158683 FITTING, elbow, 90°
113286 VALVE, safety
238349 PUMP, paint, line striper
113607 FITTING, barb, 1 in.
101818 CLAMP, hose
191627 HOSE, suction
113606 FITTING, tee
113561 PLUG, pipe
191624 TUBE, suction
191635 STRAINER, inlet
176684 ADAPTER, bung
100220 SCREW, thumb
191641 CAP, splash
191645 HOSE, coupled, 24 in. (61 cm)
191647 HOSE, coupled, 27 in. (68.5 cm)
113687 FILTER, intake
1
3
117 102814 GAUGE, pressure, fluid
119 054163 TUBE, polyolefin, shrink
120 054747 TUBE, polyolefin, shrink, blue
121 054748 TUBE, polyolefin, shrink, green
141 113797 COLLAR, screw, set
REF
REF
REF
3
1
1
4
1
3
3
3
3
3
147 100286 ELBOW, street
149 162449 FITTING, nipple, reducing
152 109468 SCREW, cap, hex hd
153 239022 BRACKET, comp, painted
173 112026 ELBOW, street
174 111697 PLUG, pipe
192 191731 EXTENSION, pipe, pump
200 238329 GUN, spray, bead (manual 308612)
201 238332 GUN, spray, auto (manual 308613)
310664D
7
Parts
Parts
Regulator
2
4
3
6
7
17
5
10
9
13
3
12
3
15
3
1
14
ti4743a
Regulator Parts List
Ref.
Ref.
No. Part No. Description
9
Qty.
No. Part No. Description
Qty.
157191 NIPPLE, reducing 3/4 in. npt x
1/2 npt, 1-7/8 in. (46 mm) long
158683 FITTING, elbow, 90°, 1/2-14 npt(f) x
1/2-14 npt(m)
1
1
2
3
4
113291 REGULATOR, air
108124 VALVE, safety
100840 ELBOW, street, 1/4-18 npt
159239 NIPPLE, reducing, 1/2 in. npt x 3/8
in. npt, 1-5/8 in. (41 mm) long
113292 VALVE, ball, 3-way
166999 ELBOW, 90° street, reducing
1/4 in. npt (f) x 1/2 in. npt (m)
1
1
4
10
1
REF
12
13
14
15
17
100030 BUSHING
1
1
1
1
1
104655 GAUGE, pressure, air
112790 CONNECTOR, tube, 1/4-18 npt
113548 TEE, 1/4-18 npt
159841 ADAPTER, 1/4-18 npt(f) x
3/8-18 npt(m)
5
6
1
1
7
113319 FITTING, air, 3/8 OD x 1/4-18 npt
1
18
070408 SEALANT, pipe, sst (not shown)
1
8
310664D
Parts
Parts
Engine System
154
1(Ref)
1
98
77
118
112
36
64,120
123
84
64,119
85
160
78
69
30
68
66
85
14
20
31
83
129
64,121
60
130
1(Ref)
133
65
130
65
82
61
155
16
20
17
59
57
19
58
150
15
56
75
25
76 66
27
28
26
32
435 (REF)
33
96
29
31
30
96a
99
100
47
34
63
ti4745a
10
310664D
Parts
Engine System Parts List
Ref.
Ref.
No. Part No. Description
Qty.
REF
2
No. Part No. Description
1
Qty.
65
66
68
69
75
76
210658 VALVE, ball
107050 INSERT, hose, beaded
102473 CLAMP, hose
191649 HOSE, 0.63 in. ID, 15 in. (38 cm)
107032 ELBOW, 90°, 3/8-18 npt
156022 ADAPTER, 3/8 in. npt x 1/2 in. npt,
1-1/2 in. (38 mm) long
191686 GUARD, top, left
191687 GUARD, top, right
191686 GUARD, top, left
113287 ENGINE, Kohler, 18 hp
101566 LOCKNUT, nylon, 3/8-16
106063 COUPLING, flexible
113295 SHEAVE, 1 groove, ‘B’
801376 BUSHING, H-1.125
605358 KEY, sprocket
100132 WASHER, flat
191620 SUPPORT, pump
100052 WASHER, lock
107143 CAPSCREW, soc hd, grade 5,
7/16-14 unc-3a; 1.25 in. (31 mm)
long
100004 CAPSCREW, hex hd, grade 5,
7/16-14 unc-2a; 1.25 in. (31 mm)
long
100023 WASHER, flat
100133 WASHER, lock, 3/8 in.
191253 PUMP, vane
100187 NUT, grade 5, 5/16-24
219099 KNOB, pump
100022 CAPSCREW, hex hd, grade 5,
1/4-20 unc-2a; 3/4 in. (19 mm) long
158683 ELBOW, 90°, 1/2-14 npt(f) x
1/2-14 npt (m)
158491 NIPPLE, 1/2 in. npt x 1/2 npt,
1-5/8 in. (41 mm) long
113613 ADAPTER, female pipe, 1/2-14
npt(f) x 1-1/16-12 unf-2a
192045 MANIFOLD, valve
104813 PLUG, pipe; 3/8-18 npt
110311 NIPPLE, straight; 3/8-18 npt(f) x
3/4-16 unf
113703 REGULATOR, hydraulic flow
191648 HOSE, 1 in. ID
1
REF
1
1
1
1
11
1
14
15
16
17
19
20
26
27
28
2
1
1
1
77
78
80
81
82
83
84
85
1
1
1
1
1
1
4
2
4
4
191687 GUARD, top right
191695 GUARD, motor, front
191696 GUARD, belt, lower
113609 BUMPER, nylon
100575 CAPSCREW, hex hd, grade 5,
3/8-16 unc-2a, 5/8 in. (16 mm) long
238681 TANK, fuel
REF
29
30
31
32
33
34
36
2
4
1
1
1
4
96
1
1
1
1
1
1
2
2
1
1
1
1
96a 113371 HOSE, fuel line
98
99
113372 COUPLING, fuel line
100549 ELBOW, street pipe, 90°
100 107049 INSERT, hose, beaded
101 113681 SPRING, compression (not shown)
112 100015 NUT, hex, grade 5, 1/4-20 unc-2b
118 112179 SCREW, mch, grade 5, M5 x 12
123 191863 GUARD, hose
REF
1
41
56
57
129 100195 NIPPLE, pipe, 3/8-18 npt
130 165472 ELBOW, pipe, 90°, 3/8 npt(f)
133 107053 ELBOW, street, 3/8-18 npt(f) x
1/2-14 npt(f)
150 100421 SCREW,set grade 5, 5/16-18
unc-3a, 0.375 in. (10 mm) long
154 192228 BRACKET, fuel coupler
155 111445 SCREW, drive
160 150286 ADAPTER, 3/8 in.
1
2
58
59
60
1
1
3
1
3
1
1
61
63
64
3
1
REF
435 238346 HOSE, 0.63 in. ID, 19 in. (48 cm)
191645 HOSE, coupled, 29.5 in. (75 cm)
310664D
11
Parts
Parts
Battery System
13
6
12
11
14
20
10(Ref)
9(Ref)
25
10
9
5
4
7
67
8
12
36
36
ti4749a
112
112
12
Regulator Parts List
Ref.
Ref.
No. Part No. Description
Qty.
No. Part No. Description
4
5
6
7
8
9
10
11
Qty.
12
13
14
20
25
36
67
100016 WASHER, lock
102040 NUT, lock, hex
101566 NUT, lock
100132 WASHER, flat
111803 SCREW, cap, hex hd
100022 SCREW. cap, hex hd
801972 PAD, battery
4
5
22
11
5
5
1
115753 BATTERY, 33 AH, sealed
107072 CABLE, electric, negative
107073 CABLE, electric, positive
801958 PROTECTOR, terminal, red
801959 PROTECTOR, terminal, black
803525 BOLT, battery
1
1
1
1
1
2
1
2
107069 CLAMP, battery
100527 WASHER, wrought
112 100015 NUT, hex mscr
2
12
310664D
Parts
Parts
Main Base Assembly (page 1 of 2)
125
14
407
145
95
406
410
80
2
128
81
14
412
107
25
409
438
24
20
170
408
410
431
428
431
436
104
409
435
412
436
436
434
184
183
402
411
ti4746a
14
310664D
Parts
Main Base Assembly Parts List
(page 1 of 2)
Ref.
Ref.
No. Part No. Description
400 248422 MAIN BASE ASSEMBLY (includes
40 to 459). Also page 16.
401 238337 BASE, main
405 100731 WASHER
406 100469 CAPSCREW, hex hd, grade 5,
3/8-16 unc-2a, 3/4 in. (19 mm) long
407 191248 BASE. pump mount
408 113597 COOLER, air
408a 240798 KIT, motor and fan replacement
409 100424 SCREW
Qty.
No. Part No. Description
2
14
20
24
25
Qty.
248422 Base RoadLazer Palletized
101566 LOCKNUT, nylon, 3/8-16
100132 WASHER, flat
1
22
11
1
1
6
5
113619 IDLER, vee, pulley
111803 CAPSCREW, hex hd, grade 5,
3/8-16 unc-2a, 2 in. (51 mm) long
191690 GUARD, belt, front
191697 GUARD, belt, side
100531 CAPSCREW, hex hd, grade 5,
3/8-16 unc-2a, 2.5 in. (63.5 mm)
long
5
1
1
1
4
4
80
81
95
1
1
5
410 801020 NUT, lock, hex, grade 5, 1/2-13
unc-2b
104 115501 SENSOR, proximity
107 107257 SCREW, thd forming, hex, washer
hd, grade 5, 1/4-20 unc-3a, 0.50 in.
(13 mm) long
1
2
411 100454 CAPSCREW, hex hd, grade 5,
3/8-16 unc-2a, 7/8 in. (22 mm) long
412 101566 LOCKNUT, grade 5
428 113667 BUSHING, nylon
431 107050 INSERT, hose, beaded
434 191650 HOSE, 0.63 in. ID, 14 in. (36 cm)
435 191651 HOSE, 0.63 in. ID, 19 in. (48 cm)
436 102473 CLAMP, hose
4
20
1
4
1
1
4
4
125 191855 PLATE, logo
1
4
2
1
1
1
128 111583 PAD, vibration, motor
145 187797 SPACER, duct
170 114040 CAP, connector, weathertight
183 113603 CAP, hub
438 109570 WASHER, plain
184 191965 RING, rubber
310664D
15
Parts
Parts
Main Base Assembly (page 2 of 2)
Main Base Assembly Parts List
(page 2 of 2)
Ref.
No. Part No. Description
Qty.
62
72
24
43
44
113619 PULLEY, idler, vee
109570 WASHER, plain
801020 NUT, lock, hex, grade 5, 1/2-13
unc-2b
1
1
1
62
71
73
109
62
70
47
62
101818 CLAMP, hose
157785 UNION, swivel; 3/4 npt(m) x 3/4
npsm(f) carbon steel
1
3
108
423
63
68
69
191648 HOSE, 1 in. ID, 9 in. (X mm) long
102473 CLAMP, hose
191649 HOSE, 0.63 in. ID, 12 in. (X mm)
long
160032 NIPPLE, 3/4-14 npt(f)
111337 TEE, street, 3/4-14 npt(f)
191647 HOSE, coupled, 27 in.
113671 ELBOW, 3/4-14 npt(f)
1
1
1
422
421
109
44
70
71
72
73
1
2
1
1
1
415
415
43
420
108 191656 BRACKET, manifold
109 106285 U-BOLT, grade 5, 2 x 1/4-20 unc-2a
400 248422 MAIN BASE ASSEMBLY (includes
items 401 to 438).
402 238787 RESERVOIR, hydraulic
404 102040 NUT, lock, hex, grade 5, 1/4-20
unc-3b
1
404
414
419
418
1
12
413 191634 GASKET, reservoir
414 238818 COVER, reservoir
415 107074 BREATHER
416 178794 FILTER, fluid
417 500054 BUSHING, hex hd, 1-11.5 npt(f) x
1-1/4-11.5 npt(m)
1
1
1
1
1
417
416
434
436
69
68
431
413
402
418 100485 NIPPLE, pipe
1
1
1
1
419 100474 COUPLING, pipe
420 107067 PACKING, o-ring
421 178750 FITTING, return, 1-11.5 npt(m) x
3/4-14 npt(f)
422 105429 NUT, seal, grade 5
423 160327 UNION, angle adapter, 3/4-14
npsm x 3/4-14 npt(f)
424 106114 STRAINER, inlet
426 104444 PACKING, o-ring
427 104126 PLUG, boss
431
433
432
63
1
1
1
1
1
47
429 100549 ELBOW, street, pipe, 90°
430 107049 INSERT, hose, beaded
431 107050 INSERT, hose, beaded
432 101353 NIPPLE, pipe
433 103475 TEE, pipe, 1/2-14 npt(f)
434 191650 HOSE, 0.63 in. ID, 14 in. (36 cm)
436 102473 CLAMP, hose
1
1
REF
1
1
REF
REF
430
24
429
426
ti4747a
427
16
310664D
Technical Data
Technical Data
Maximum Working Pressure
Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 psi (138 bar)
Hydraulics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 psi (103 bar)
Glass bead system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 psi (5 bar)
Maximum Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 gpm/pump @ 2000 psi (138 bar)
Operating Pressure of Air-actuated Trigger
Minimum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 psi (3 bar)
Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 psi (12 bar)
Sound Levels*
Sound power level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99.4 dB(A)
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81.5 dB(A)
Weight (empty / full)
®
Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kohler 18 HP
Fluid Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f) air inlets
Hydraulic Oil Reservoir Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 gallons (45 liters)
Glass Bead Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 lb (136 kg)
Wetted Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
tungsten carbide, 303, 316 & 415 series stainless steel;
PTFE, acetal homopolymer, leather
*Sound levels measured at 3.1 ft (1 m) under maximum operating conditions per ISO3744.
®
Kohler is a registered trademark of the Kohler Co.
310664D
17
Graco Standard Warranty
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will
be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco Information
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
or call 1-800-690-2894 to identify the nearest distributor.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 310664
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2004, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Revised 08/2011
18
310664D
|
