PDWT500/580R
GE Profile™ Dishwasher with SmartDispense™ Technology
Dimensions and Installation Information (in inches)
Electrical Rating
24-3/4*
24
Voltage AC.......................................................... 120
Hertz..................................................................... 60
Total connected load amperage............. 9.9
Calrod® heater watts max........................ 875
22-1/2
For use on adequately wired 120-volt,
15-amp circuit having 2-wire service
with a separate ground wire. This appliance
must be grounded for safe operation.
27-1/2
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.
33-13/16" MIN.
adj. to 35"
†† Add 1/2" for deepest part of contour door.
Allow an additional 2” for the handle on
PDWT500/PDWT400/PDWT200 Series
models.
21-1/4
Countertop
90°
This wall area
must be free of
pipes or wires
90°
4" (Adjustable)
24"
MIN.
Electrical
4
5
4
5
wiring is
3" from
cabinet
3-1/2
4
Hot
water
line on
left
Electrical
wiring on
right
34" to 34-3/4"
6
6
Underside
of countertop
to floor
Plumbing and electrical
service must enter
inside shaded area
2
19" MIN. from wall
24" From wall
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
24" MIN.
As an EnErgy StAr®
Listed by
Underwriters
Laboratories
partner, gE has determined
that this product meets the
EnErgy StAr guidelines
for energy efficiency.
Specification Created 6/09
250235
|