Fujitsu Tablet FMWCC43 User Manual

FMWCC43  
Slipcase  
Installation Guide  
Stylistic 3400  
FUJITSU PC CORPORATION  
These instructions provide details on using the  
FMWCC43 slipcase. This case is designed for use  
with the Stylistic 3400 pen tablet. The slipcase  
provides added protection when transporting,  
using, or storing the pen tablet.  
Note: Prior to installing your pen tablet in the  
slipcase, be sure to install a screen protector on  
the screen. It is difficult to install a screen  
protector once the system is in the slipcase.  
Installing the pen tablet  
0
To install your pen tablet into the slipcase, open  
the side flap of the slipcase. The flap is secured by  
a long strip of Velcro® that is attached to the back  
of the slipcase (see Figure 1).  
PC Card/  
Radio Slot  
Side  
Flap  
Antenna Cover Hood  
Antenna Cover Hood attachment strip  
Figure 2. Stylistic 3400 Slipcase - Front  
Velcro®  
D-rings  
strip  
The ends of the elasticized handstraps have a D-ring to  
which you can attach the shoulder strap. To secure the  
shoulder strap, attach the strap clips to two of the  
D-rings. The slipcase can be carried vertically or  
horizontally, depending on how you orient the clips.  
Attaching the Antenna cover hood  
0
For Stylistic 3400 pen tablets that are equipped with  
radios, an optional Antenna Cover (FMW42RC1) may  
be attached to the system to protect the protruding  
antenna. To protect the Antenna Cover, each slipcase  
includes a removeable nylon Antenna Cover Hood.  
Note: • For installation instructions for the Antenna  
Cover, reference the instructions that  
Handstraps  
accompany it. The following instructions are  
solely for installing the Antenna Cover Hood.  
Figure 1. Stylistic 3400 Slipcase - Rear  
Install the Antenna Cover prior to installing  
the Antenna Cover Hood.  
Slide the system into the slipcase, with the screen  
facing the open window. Reattach the flap to the  
side of the slipcase.  
1. Position the hood over the Antenna Cover to ensure  
a good fit.  
Note: The removable Antenna Cover Hood illustrated  
in Figure 1 is discussed later in this procedure. It  
is designed to accommodate a Stylistic 3400  
containing a radio with a protruding antenna  
with the optional Antenna Cover Kit installed.  
2. Remove the hood from the cover and detach the  
paper covering the adhesive Velcro® strip on the  
inside of the hood.  
Stylistic 3400 is a trademark of Fujitsu PC Corporation © 2000 Fujitsu PC Corporation  
 
1/00  
58-0703-00A  

EAW Speaker SB185C User Manual
Edirol Portable Speaker MA 5A User Manual
Everpure Water System CWS 10 User Manual
Extron electronic Scale DSC 301 HD User Manual
Fedders Heat Pump CH18ABD1 User Manual
Field Controls Humidifier 52000 User Manual
Fisher Price Baby Toy H6391 User Manual
Franklin Industries LLC Ice Maker fim35 User Manual
FUNAI CRT Television F4813T User Manual
GE Cordless Telephone 28320 User Manual