Fujitsu Surge Protector S2210 User Manual

Fujitsu LifeBook  
S Series  
BIOS Guide  
LifeBook S Series Model:  
S2210 - Vista  
Document Date: 01/30/2007  
Document Part Number: FPC58-1655-01  
FUJITSU COMPUTER SYSTEMS CORPORATION  
1
 
M a i n M e n u  
severe, it will give you the opportunity to modify the  
settings of the setup utility, as described in the following  
steps:  
1. When you turn on or restart the computer there is  
a beep and/or the following message appears on  
the screen:  
Error message - please run SETUP  
program Press <F1> key to continue,  
<F2> to run SETUP  
2. If an error message is displayed on the screen, and  
you want to continue with the boot process and start  
the operating system anyway, press the [F1] key.  
If your notebook emits a series of beeps  
that sounds like a code and the display is  
blank, please refer to the Troubleshoot-  
ing section of your system Use’s Guide.  
The Troubleshooting Section includes a  
list of error messages and their mean-  
ings.  
If your data security settings require it,  
you may be asked for a password before  
the operating system will be opened.  
3. If an error message is displayed on the screen, and  
you want to enter the setup utility, press the [F2] key.  
4. When the setup utility starts with a fault present, the  
system displays the following message:  
Warning!  
Error message  
[Continue]  
5. Press any key to enter the setup utility. The system  
will then display the Main Menu with current  
parameters values.  
3
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS  
The Main Menu allows you to set or view the current  
system parameters. (See Navigating through the Setup  
Utility on page 2 for more information)  
System Time and System Date can also be  
set from your operating system without  
using the setup utility. Use the Date and  
Time icon on your Windows Control panel  
or type time or date from the MS-DOS  
prompt.  
The following tables show the names of the menu fields  
for the Main menu and its submenus, all of the options  
for each field, the default settings and a description of  
the field’s function and any special information needed  
to help understand the field’s use. Note that the actual  
drive labels shown may vary.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
System Time:  
System Date:  
[02:34:56]  
[01/29/2007]  
Adjust calendar clock.  
Drive0  
Drive1  
[FUJITSU MHV2100BH PL]  
[None]  
<Tab>, <Shift-Tab>, or  
<Enter> selects field.  
Language:  
[English (US)]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 1. Main Menu  
Table 1: Fields, Options and Defaults for the Main Menu  
Menu Field  
Options  
Default  
Description  
System Time:  
–—  
–—  
Sets and displays the current time. Time is in a 24 hour for-  
mat of hours:minutes:seconds with 2 digits for each.  
(HH:MM:SS). Example: 16:45:57. You may change each  
segment of the time separately. Move between the seg-  
ments with the [Tab] key and/or [Shift] + [Tab] keys.  
4
 
M a i n M e n u  
Table 1: Fields, Options and Defaults for the Main Menu  
Menu Field  
Options  
Default  
Description  
System Date:  
–—  
–—  
Sets and displays the current date. Date is in a month/day/  
year numeric format with 2 digits each for month and day  
and 4 digits for year. (MM/DD/YYYY) for example: 03/20/  
2006. You may change each segment of the date sepa-  
rately. Move between the segments with the [Tab] key  
and/or [Shift] + [Tab] keys.  
Drive0  
Drive1:  
Selects the Drive0  
Serial ATA drive  
submenu  
The product  
number of the  
hard drive.  
Display the type of device on this ATA/IDE interface. Press-  
ing the Enter key selects the Drive0 submenu allowing  
additional device configuration options for this interface.  
Selects the Drive1  
Serial ATA drive  
submenu  
The product  
number of the  
CD-ROM  
drive.  
Display the type of device on this ATA/IDE interface, if  
there is one. Pressing the Enter key selects the Drive1 sub-  
menu allowing additional device configuration options for  
this interface.  
• English (US)  
• Japanese (JP)  
Language:  
[English (US)]  
The default setting differs between the US/European and  
the Japanese model. Selects the display language for the  
BIOS.  
5
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
Drive0 Submenu of the Main Menu  
The Drive0 submenu identifies what ATA devices are installed.  
Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads  
and sectors may also be displayed.  
PhoenixBIOS Setup Utility  
Main  
Drive0 [FUJITSU MHV2080BH]  
Item Specific Help  
Type:  
[Auto]  
LBA Format  
Select Serial ATA/IDE  
drive installed here.  
Total Sectors:  
195371568  
Maximum Capacity:  
100GB SATA1  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 2. Drive0 Submenu  
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu  
Menu Field  
Options Default Description  
Type:  
[Auto]  
Selects the hard drive device type. Select Auto to have the type automatically identified  
by the BIOS at POST. If None is selected, all of the following Setup items do not appear.  
• Auto  
• None  
LBA Format  
Logical Block Addressing (LBA)  
Total Sectors:  
---  
---  
The total number of sectors on your hard disk  
---  
---  
Maximum Capacity:  
The maximum capacity of your hard disk  
A bootable CD-ROM or DVD-ROM may have a floppy disk or hard drive format. When a bootable CD-ROM or  
DVD-ROM is used, drive allocations change automatically without changing the BIOS setup. If a floppy disk for-  
mat CD-ROM or DVD-ROM is used, the disc becomes Drive A. The CD-ROM or DVD-ROM will only take drive  
C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM or DVD-ROM  
can never use a C: designation if a formatted internal hard drive is present since the C: designator is always  
reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your applica-  
tion software will use the new designations.  
Be aware of the operating environment when booting from CD-ROM/DVD-ROM or you may mistakenly over-  
write files.  
6
 
M a i n M e n u  
Drive1 Submenu of the Main Menu  
The Drive1 submenu allows you to configure secondary ATA devices.  
Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads  
and sectors may also be displayed.  
PhoenixBIOS Setup Utility  
Main  
Primary Master [None]  
Item Specific Help  
Type:  
[Auto]  
Select Serial ATA/IDE  
drive installed here.  
Multi-Sector Transfers:  
LBA Mode Control:  
Transfer Mode:  
[Disabled]  
[Disabled]  
[Standard]  
[Disabled]  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Ultra DMA Mode:  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 3. Drive1 Submenu  
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
NOTE: The Type field does not appear as a drop-down menu. Tap the  
spacebar to toggle the selections.  
Type:  
• Auto  
• None  
[Auto]  
Selects the ATA/ATAPI device type. Select Auto to have the type automati-  
cally identified by the BIOS at POST. If None is selected, all of the following  
setup items do not appear.  
Multi-Sector  
Transfers:  
• Disabled  
• 2 Sectors  
• 4 Sectors  
• 8 Sectors  
• 16 Sectors  
[Disabled]  
[Disabled]  
The best option is selected by the BIOS automatically when Auto is  
selected and cannot be selected by the user. Specifies the number of  
sectors per block for multiple sector transfer.  
LBA Mode  
Control:  
• Disabled  
• Enabled  
The best option is selected by the BIOS automatically when Auto is  
selected and cannot be selected by the user. Enables or disables Logical  
Block Addressing in place of Cylinder, Head, Sector addressing.  
7
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Transfer Mode: • Standard  
• Fast PIO 1  
[Standard]  
The best option is selected by the BIOS automatically when Auto is  
selected and cannot be selected by the user. Selects the method for  
moving data to/from the drive. Autotype the drive to select the opti-  
mum transfer mode.  
• Fast PIO 2  
• Fast PIO 3  
• Fast PIO 4  
• Multiword DMA 1  
• Multiword DMA 2  
Ultra DMA  
Mode:  
• Disabled  
• Mode 0  
• Mode 1  
• Mode 2  
• Mode 3  
• Mode 4  
• Mode 5  
[Disabled]  
The best option is selected by the BIOS automatically when Auto is  
selected and cannot be selected by the user. Selects the method for  
moving data to/from the drive. Autotype the drive to select the opti-  
mum transfer mode.  
Exiting from Main Menu  
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to  
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit  
menu or to move to another menu.  
8
 
A d v a n c e d M e n u  
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS  
The Advanced Menu allows you to:  
Follow the instructions for Navigating Through the  
Setup Utility to make any changes.  
Set the I/O addresses for the infrared ports.  
Set the features of the keyboard/mouse.  
Select between the display panel and/or an external  
(See Navigating through the Setup Utility on page 2 for  
more information)  
display or video projector.  
Set internal device configurations  
Configure USB features.  
Configure miscellaneous features such as Wake Up On  
The following tables show the names of the menu fields  
for the Advanced Menu and its submenus, all of the  
options for each field, the default settings and a descrip-  
tion of the field’s function, and any special information  
needed to help understand the field’s use.  
LAN.  
Configure DMI Event Logging.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
Item Specific Help  
Serial/Parallel Port Configurations  
Keyboard/Mouse Features  
Video Features  
Configures serial ports  
and parallel ports.  
Internal Device Configurations  
CPU Features  
USB Features  
Miscellaneous Configurations  
Event Logging  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 4. Advanced Menu  
Table 4: Fields, Options and Defaults for the Advanced Menu  
Menu Field  
Description  
Serial/Parallel  
Port Configurations  
When selected, opens the Serial/Parallel Port Configurations submenu which allows the user to modify  
settings for serial, infrared, and parallel ports.  
Keyboard/Mouse  
Features  
When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal  
keyboard and mouse parameters.  
Video Features  
When selected, opens the Video Features submenu, which allows setting of the display parameters,  
including routing of video signals to different displays or video projectors.  
9
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
Table 4: Fields, Options and Defaults for the Advanced Menu  
Menu Field  
Description  
Internal Device  
Configurations  
When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the IDE  
LAN, and modem controllers.  
CPU Features  
USB Features  
When selected, opens the CPU Features submenu, which allows the user to enable or disable the AMD  
Virtualization(TM) features.  
Configures USB features.  
Miscellaneous  
Configurations  
Configures miscellaneous features, such as Wake Up On LAN and Power Button.  
Event Logging  
When selected, opens the event logging submenu.  
10  
 
A d v a n c e d M e n u  
Serial/Parallel Port Configuration Submenu of the Advanced Menu  
The Serial/Parallel Port Configuration submenu  
provides the ability to set the I/O addresses and inter-  
rupt levels for the infrared ports of your system.  
I/O addresses, DMA channels, and  
Interrupt levels can be entered in various  
ways, including via the BIOS setup utility,  
the control software for the I/O device, or  
the hardware. If any two ports or devices  
have the same I/O address assigned your  
system will not function normally. Please  
keep a record of original settings before  
making any changes in the event that a  
restoration is required. See your hardware  
and software documentation as well as the  
setup utility to determine settings,  
To prevent IRQ and address conflicts,  
avoid changing the default settings. If  
you must change the settings, you can  
call 1-800-8Fujitsu for technical assis-  
tance.  
All I/O addresses in Table 5 are in hexa-  
decimal.  
limitations, etc.  
PhoenixBIOS Setup Utility  
Advanced  
Item Specific Help  
IrDA Port Configurations  
Serial Port:  
[Enabled]  
[3F8/IRQ 4]  
[Enabled]  
[FIR]  
[Disabled]  
The port is disabled.  
Base I/O Address/IRQ  
Infrared Port:  
Mode:  
[Enabled]  
Base I/O Address/IRQ:  
DMA Channel:  
[2E8/IRQ 3]  
[DMA 3]  
The port is enabled  
with user configuration.  
Parallel Port:  
Mode:  
Base I/O Address:  
Interrupt:  
[Enabled]  
[Bi-directional]  
[378]  
[Auto]  
Plug & Play OS  
configure the port.  
[IRQ 7]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 5. Serial/Parallel Port Configuration Submenu  
11  
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
Table 5: Fields, Options and Defaults for Serial/Parallel Port Configurations Submenu of Advanced Menu  
Menu Field  
Options  
Default  
Description  
Serial Port:  
Disabled  
Enabled  
Auto  
[Enabled]  
Configures the serial port using either no configuration (Disabled), a user  
defined configuration (Enabled), or by allowing the BIOS or OS to choose  
the configuration (Auto).  
Base I/O  
Address/IRQ:  
3F8/IRQ 4  
2F8/IRQ 3  
3E8/IRQ 4  
2E8/IRQ 3  
[3F8/IRQ 4]  
[Enabled]  
Allows user to set the serial port base I/O address and interrupt when serial  
port is Enabled.  
Infrared Port:  
Disabled  
Enabled  
Auto  
Configures the infrared port using either no configuration (Disabled), a user  
defined configuration (Enabled), or by allowing the BIOS or OS to choose  
the configuration (Auto).  
Mode:  
IrDA  
FIR  
[FIR]  
When the infrared port is enabled this option is available allowing the user  
to set the mode for the infrared port. Standard IrDA (IrDA 1.0) transmits  
data at up to 115.2 Kbps; FIR (IrDA 1.1) transmits at up to 4Mbps.  
Base I/O  
Address/IRQ:  
3F8/IRQ 4  
2F8/IRQ 3  
3E8/IRQ 4  
2E8/IRQ 3  
[2E8/IRQ 3]  
Allows user to set the infrared port I/O address and interrupt when the  
infrared port is Enabled.  
DMA Channel:  
DMA 1  
DMA 3  
[DMA 3]  
[Enabled]  
Allows user to set the direct memory access channel when FIR is Enabled.  
Parallel Port:  
Disabled  
Enabled  
Auto  
Configures the parallel port using either no configuration (Disabled), a user  
defined configuration (Enabled), or by allowing the BIOS or OS to choose  
the configuration (Auto).  
Mode:  
Output Only  
Bi-directional  
ECP  
[Bi-directional]  
When the parallel port is enabled this option is available allowing the user  
to set the mode for the parallel port. Bi-directional allows two-way transfer  
of information between your notebook and a parallel device. Output Only  
(Half Duplex) allows information to be transferred in only one direction,  
from your notebook to the printer or similar device. ECP Mode allows com-  
munication with the ECP class of parallel I/O devices.  
Base I/O  
Address:  
378  
278  
3BC  
[378]  
Allows user to set the parallel port base I/O address when the parallel port  
is Enabled.  
Interrupt:  
IRQ 5  
IRQ 7  
[IRQ 7]  
Allows user to set the parallel port interrupt when the parallel port is  
Enabled.  
12  
 
A d v a n c e d M e n u  
Keyboard/Mouse Features Submenu of the Advanced Menu  
The Keyboard/Mouse Features submenu is for setting the parameters of NumLock.  
PhoenixBIOS Setup Utility  
Advanced  
Security  
Power Savings  
Exit  
Keyboard/Mouse Features  
Item Specific Help  
Numlock:  
[Auto]  
[On] or [Off]  
Hot Plug:  
[Enabled]  
Numlock is On or Off.  
[On/Padlock Off]  
Numlock is On, but use  
with [Fn] for 10-key  
input.  
Internal Pointing Device: [Auto Disabled]  
Initialization on Resume: [Fast]  
[Auto]  
Numlock is set to On/  
Padlock Off when PS/2  
keyboard is connected,  
otherwise Off.  
* Windows XP preserves  
Numlock state when the  
user logs off.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 6. Keyboard/Mouse Features Submenu  
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Numlock:  
• Auto  
• On  
• Off  
• On/Padlock Off  
[Off]  
Sets the NumLock function state when the computer completes boot-  
ing. When [On] or [Off], Numlock is on or off. When [On/Padlock Off]  
is pressed, Numlock is on, but [Fn] key must be pressed used for 10-key  
input. When [Auto] is selected, Numlock is set to On/Padlock Off when  
a PS/2 keyboard is connected, otherwise it is off. Windows preserves  
Numlock state when the user logs off.  
Hot Plug:  
• Disabled  
• Enabled  
[Enabled]  
Enables or disables the hot-pluggability of the external device.  
Internal  
Pointing  
Device:  
• Auto Disabled  
• Manual Setting  
• Always Enabled  
• Always Disabled  
[Auto  
Disabled]  
When [Auto Disabled] is selected, the internal pointing device is dis-  
abled when an external PS/2 device is connected. When [Manual Set-  
ting] is selected, the internal pointing device can be enabled or disabled  
with a hot key. When [Always Enabled] is selected, the internal device is  
always enabled; when [Always Disabled] is selected, the device is always  
disabled.  
Initialization  
On Resume:  
• Fast  
• Normal  
[Fast]  
When [Fast] is selected, the initialization of external PS/2 devices is opti-  
mized to speed up upon resume. (If PS/2 devices do not function after  
resume, select [Normal]). When [Normal] is selected, PS/2 device initial-  
ization is not optimized.  
13  
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
Video Features Submenu of the Advanced Menu  
The Video Features Submenu is for setting the display parameters.  
PhoenixBIOS Setup Utility  
Security Power Savings Exit  
Main  
Advanced  
Video Features  
Item Specific Help  
Display:  
[Auto]  
Select display terminal.  
Compensation: [Enabled]  
* This setting is not  
effective after  
operating system  
starts up.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 7. Video Features Submenu  
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
• Internal Flat Panel  
• External (Analog)  
• External (Digital)  
• Auto  
Display:  
[Auto]  
Selects where the video signal will be routed. Note that  
once the system boots up, the settings for the Windows  
video driver take precedence over this setting.  
• Disabled  
• Enabled  
Compensation:  
[Enabled]  
Enables or disables display compensation. Display com-  
pensation is used to match the native resolution of the  
display with the input. For example, if you are using an  
application whose resolution causes it to appear smaller  
than the screen, enabling Compensation will expand the  
image to fill the screen.  
14  
 
A d v a n c e d M e n u  
Internal Device Configurations Submenu of the Advanced Menu  
The Internal Device Configuration submenu allows the user to configure other internal devices.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Item Specific Help  
Internal Device Configurations  
[Disabled]  
Serial ATA port is  
disabled.  
Serial ATA Controller: [Enabled]  
IDE Contoller:  
Bluetooth(R):  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
LAN Controller:  
Wireless LAN:  
[Enabled]  
Serial ATA port is  
enabled.  
IEEE1394 Controller:  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 8. Internal Device Configuration Submenu  
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Serial ATA  
Controller:  
[Enabled]  
• Disabled  
• Enabled  
Enables or disables serial ATA devices.  
• Disabled  
• Enabled  
IDE Controller:  
Bluetooth(R):  
LAN Controller:  
Wireless LAN:  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
Allows you to enable and/or disable any or all IDE devices.  
Enables or disables the optional Bluetooth device.  
Enables or disables the LAN controller.  
• Disabled  
• Enabled  
• Disabled  
• Enabled  
• Disabled  
• Enabled  
Enables or disables the optional wireless LAN device.  
Enables or disables the IEEE 1394 device.  
• Disabled  
• Enabled  
IEEE1394  
Contrroller:  
15  
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
CPU Features Submenu of the Advanced Menu  
The CPU Features Submenu allows the user to enable or disable the AMD Virtualization(TM) feature.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Item Specific Help  
CPU Features  
Select AMD  
Virtualization(TM)  
enabled or disabled.  
AMD Virtualization(TM):  
[Disabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 9. CPU Features Submenu  
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
• Enabled  
• Disabled  
AMD Virtualization(TM)  
[Disabled]  
Enables or disables the AMD Virtualization(TM) feature.  
16  
 
A d v a n c e d M e n u  
USB Features Submenu of the Advanced Menu  
The USB Features Submenu configures the USB features for your system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
USB Features  
Item Specific Help  
[Enabled]  
Legacy USB Support:  
[Disabled]  
SCSI SubClass Support:  
[Enabled]  
The feature is disabled.  
[Enabled]  
Legacy Floppy Emulation  
is enabled and USB  
floppy is available  
without USB aware OS.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 10. USB Features Submenu  
Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
• Disabled  
• Enabled  
Legacy USB  
Support:  
[Enabled]  
When Disabled is selected, legacy USB emulation is dis-  
abled. When Enabled is selected, legacy USB emulation is  
enabled and USB devices are available without USB-aware  
OS.  
• Disabled  
• Enabled  
SCSI SubClass  
Support:  
[Enabled]  
When Enabled is selected, USB devices that belong to the  
SCSI subclass in the mass storage class (e.g., USB Memory  
Key) are enabled.  
17  
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
Miscellaneous Configurations Submenu of the Advanced Menu  
The Miscellaneous Configurations Submenu configures miscellaneous features for your system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Item Specific Help  
Miscellaneous Configurations  
Power Button:  
[Disabled]  
[Disabled]  
[Disabled]  
[Middle]  
Configures the power  
button.  
Wake up on LAN:  
Force LAN Boot:  
Volume Setting:  
UMA Video Memory Size:  
*ACPI OS ignores this  
setting.  
[128MB]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 11. Miscellaneous Configurations Submenu  
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu  
Menu Field  
Options  
Default  
Description  
• Disabled  
• Power Off  
Power Button:  
[DIsabled]  
When Disabled is selected, the power button does not respond to a  
press. When Power Off is selected, the button turns the power off.  
• Disabled  
• Enabled  
Wake up on  
LAN:  
[Disabled]  
[Disabled]  
When Enabled is selected, system will wake up when internal LAN  
device receives a Magic Packet while the system is powered off.  
• Disabled  
• Enabled  
Force LAN Boot:  
This feature is active only when “Wake up on LAN” is enabled.  
When enabled, in the event of a system wake-up on LAN, the  
system will try to first boot from the LAN before attempting to boot  
from any other device, regardless of the BIOS boot priority settings  
or disabling of the Preboot Execution Environment.  
• Off  
Volume Setting:  
[Middle]  
[128MB]  
Selects the initial volume setting for the system.  
• Minimum  
• Middle  
• Maximum  
• 32MB  
• 64MB  
• 128MB  
• 224MB  
UMA Video  
Memory Size:  
Allows you to select the maximum shared video memory size.  
Video memory is dynamically allocated as needed for running  
applications by Dynamic Video Memory Technology (DVMT).  
18  
 
A d v a n c e d M e n u  
Event Logging Submenu of the Advanced Menu  
The Event Logging Submenu configures event logging features for DMI events.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Event Logging  
Item Specific Help  
Event Log Capacity:  
Event Log Validity:  
Space Available  
Valid  
Press <Enter> key to  
view the contents of  
the event log.  
View Event Log:  
[Enter]  
Event Logging:  
[Enabled]  
System Boot Event:  
[Disabled]  
Clear All Event Logs:  
Mark Events as Read:  
[No]  
[Enter]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 12. Event Logging Submenu  
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Event Log Capacity:  
Space  
Display only.  
Available  
Event Log Validity:  
View Event Log:  
Event Logging:  
Valid  
Display only.  
• Enter  
[Enter]  
[Enabled]  
Allows you to view content of event log.  
Turns event logging on and off for all DMI events.  
• Disabled  
• Enabled  
• Disabled  
• Enabled  
System Boot  
Event:  
[Disabled]  
[No]  
Turns event logging on and off for DMI system boot events.  
When set to [Yes] all event logs will be cleared at next boot.  
Allows you to make all events currently in the event log as read.  
• No  
• Yes  
Clear All Event Logs:  
Mark Events as Read:  
• Enter  
[Enter]  
19  
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
SECURITY MENU – SETTING THE SECURITY FEATURES  
The Security menu allows you to set up the data security  
If you set a password, write it down and  
features of your notebook to fit your operating needs and  
to view the current data security configuration. Follow the  
instructions for Navigating Through the Setup Utility to  
make any changes. (See Navigating through the Setup  
Utility on page 2 for more information)  
keep it in a safe place. If you forget the  
password you will have to contact your  
support representative to regain access  
to your secured functions and data.  
If you make an error when re-entering  
the password a [Warning] will be dis-  
played on the screen. To try again press  
the [Enter] key and then retype the pass-  
word. Press the [Esc] key to abort the  
password setting process.  
Entering a password incorrectly three times  
in a row will cause the keyboard and  
mouse to be locked out and the warning  
[System Disabled]to be displayed. If  
this happens, restart the computer by  
turning off and on the power with the  
power switch and use the correct  
password on reboot. Note: Unless you  
have previously enabled the power switch  
in the BIOS, it will not be possible to turn  
off the unit with the switch. This is  
If the Password on Boot is Disabled you  
will not have to type your password  
upon resuming the system from the Sus-  
pend or Save-to-Disk modes.  
The following tables show the names of the menu fields  
for the Security menu and its submenus, the options for  
each field, the default settings and a description of the  
field's function and any special information needed to  
help understand the field's use. The default condition is  
no passwords required and no write protection.  
applicable for non-ACPI OS’s.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
Supervisor Password Is:  
User Password Is:  
Clear  
Clear  
Press <Enter> key to  
set Supervisor Password  
to enable any password  
features.  
Set Supervisor Password  
Set User Password  
Minimum User Password Length: [0]  
[Enter]  
[Enter]  
Password on Boot:  
[Disabled]  
Then password entry is  
required to enter BIOS  
Setup.  
On Automatic Wake up:  
KB Lock on Resume:  
Boot from Removable Media:  
Flash Write:  
[Disabled]  
[Disabled]  
[All]  
[Enabled]  
Hard Disk Security  
Owner Information  
Security Chip Setting  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 13. Security Menu  
20  
 
S e c u r i t y M e n u  
Table 13: Fields, Options and Defaults for the Security Menu  
Menu Field  
Options  
Default  
Description  
Supervisor  
Password is:  
–—  
Clear  
A display-only field. Set is displayed when the system Supervisor  
Password is set and Clear when it is not.  
User Password is:  
–—  
Clear  
A display-only field. Set is displayed when the general User Password is  
set, and Clear when it is not.  
Set Supervisor Pass- [Enter]  
word  
[Enter]  
Sets, changes or cancels Supervisor Password. The Supervisor Password  
may be up to eight characters long and include only letters or numbers  
(no symbols). Passwords are NOT case-sensitive. To cancel a password  
press the Enter key instead of entering characters in the Enter New  
Password field and in the Re-enter New Password field. When a Super-  
visor Password is set it must be used to access the BIOS setup utility.  
Set User Password  
[Enter]  
[Enter]  
This field can only be accessed if the Supervisor Password is set. Sets,  
changes or cancels the User Password. The User Password may be up to  
eight characters long and must include only letters or numbers (no sym-  
bols). Passwords are NOT case-sensitive. To cancel a password press the  
Enter key instead of entering characters in the Enter New Password field  
and in the Re-enter New Password field. When a User Password is set it  
must be used to access the BIOS setup utility.  
Minimum User  
[0]  
[0]  
Sets the minimum length for User Password.  
Password Length:  
Password on Boot:  
• Disabled  
• First Boot  
• Every Boot  
[Disabled]  
When Enabled, a password (User or Supervisor) is required after Power  
On Self Test (POST) before the operating system will be read from a  
disk. When set to Disabled no password is required. If no Supervisor  
Password is set this feature is not available and no password is required.  
On Automatic  
Wake up:  
• Disabled  
• Enabled  
[Disabled]  
[Disabled]  
This field is active only when Password On Boot is set to First Boot or  
Every Boot. When disabled, password entry is not required on auto-  
matic wake up on LAN or Real Time Clock. When enabled, the pass-  
word is still required on automatic wake up.  
KB Lock on  
Resume:  
• Disabled  
• Enabled  
When [Enabled], this feature locks out PS/2 keyboard and mouse inputs  
upon resume until a password is enetered. (This feature only works  
when any password is entered before OS boot. When [Disabled], this  
feature is disabled.  
Boot from  
• All  
[All]  
Selecting Supervisor Only allows supervisor access only.  
Removable Media:  
• Supervisor  
only  
Flash Write:  
• Disabled  
• Enabled  
[Enabled]  
When set to disabled, the BIOS Flash Memory will be write-protected.  
Hard Disk Security  
–—  
–—  
–—  
–—  
Submenu that allows you to configure hard disk security features.  
Submenu that allows you to set Owner information.  
Owner  
Information  
Security Chip  
Setting  
–—  
–—  
Submenu that allows you to configure the security chip.  
21  
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
Hard Disk Security Submenu of the Security Menu  
The Hard Disk Security Submenu is for configuring hard disk security features.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Hard Disk Security  
Item Specific Help  
Drive0:  
Clear  
Set Master Password:  
Set User Password  
Drive1:  
Set Master Password  
Set User Password  
[Enter]  
[Enter]  
Not Available  
[Enter]  
[Enter]  
Password Entry on Boot: [Enabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 14. Hard Disk Security Submenu  
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Note that when a Master Password is set for a hard disk drive, the hard disk drive will only function in a system that has the  
same hard disk drive password. If the drive is put into another system with no password or with a different password, the hard  
disk drive will not work. Note, however, that the data on the drive is not encrypted.  
Drive0  
Clear  
-----  
-----  
-----  
Enter  
Enter  
Display only. Either Clear or Set, depending upon whether a Master  
Password is entered for Drive0 in the following field.  
Set Master Password  
Set User Password  
Allows you to enter a master password when a supervisor password has  
been set.  
Allows you to enter a user password when a supervisor password has  
been set.  
Drive1:  
---  
---  
---  
---  
A display-only field. Not Available is displayed.  
Set Master Password  
Set User Password  
Enter  
Enter  
[Enabled]  
Password Entry on  
Boot:  
• Disabled  
• Enabled  
When disabled, it is not necessary to enter the password before boot-  
ing.The hard disk is still password-protected without entering password.  
22  
 
S e c u r i t y M e n u  
Owner Information Submenu of the Security Menu  
The Owner Information Submenu is for setting owner information. Note that Owner Information cannot be set  
without having entered a supervisor’s password.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Owner Information  
Item Specific Help  
Owner Information Is:  
Set Owner Information  
Clear  
Press <Enter> key to  
set owner information.  
Up to 80 characters can  
be set. Available  
characters are ASCII  
codes from 32 through  
126.  
[Enter]  
Foreground Color:  
Background Color:  
[Gray]  
[Black]  
The owner information  
is always displayed at  
the bottom line of the  
screen during POST.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 15. Owner Information Submenu  
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Owner  
–—  
Clear  
Display only.  
Information Is:  
Set Owner  
Information:  
–—  
[Enter]  
[Gray]  
Field to write owner infor-  
mation (e.g., your name).  
Foreground  
Color:  
Set foreground color.  
• Black  
• Blue  
• Green  
• Cyan  
• Red  
• Gray  
• Light Red  
• Light Magenta  
• Yellow  
• Magenta  
• Brown  
• White  
• Light Blue  
• Light Green  
• Light Cyan  
• Bright White  
Background  
Color:  
[Black]  
Sets background color.  
• Black  
• Blue  
• Green  
• Cyan  
• Red  
• Gray  
• Light Red  
• Light Magenta  
• Yellow  
• Magenta  
• Brown  
• White  
• Light Blue  
• Light Green  
• Light Cyan  
• Bright White  
23  
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
Security Chip Setting Submenu of the Security Menu  
The Security Chip Setting Submenu is for enabling or disabling the embedded security chip.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Security Chip Setting  
Item Specific Help  
Security Chip:  
[Disabled]  
Clear Security Chip:  
[Enter]  
Security Chip State:  
Disabled  
Deactivated  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 16. Security Chip Setting Submenu  
Table 16: Fields, Options and Defaults for the Security Chip Setting Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Security Chip:  
[Disabled]  
Allows you to enable or disable the security chip. Note that this is only  
active if a Supervisor Password has been entered. A reboot is required after  
exit to configure the Security Chip correctly. Clear Security Chip option  
becomes selectable after reboot.  
• Disabled  
• Enabled  
Clear Security Chip  
Security Chip State:  
–—  
–—  
[Enter]  
–—  
This field is not selectable until after the security chip is enabled and the sys-  
tem is rebooted.  
Display only, to indicate the state of the chip if it has been enabled, dis-  
abled, activated or deactivated.  
Exiting from the Security Menu  
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to  
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to  
another menu, use the cursor keys.  
24  
 
S e c u r i t y M e n u  
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE  
The Boot Menu is used to select the order in which the  
BIOS searches sources for the operating system. Follow  
the instructions for Navigating Through the Setup  
Utility to make any changes. (See Navigating through the  
Setup Utility on page 2 for more information)  
The following tables show the names of the menu fields  
for the Boot menu and its submenu, all of the options  
for each field, the default settings and a description of  
the field's function and any special information needed  
to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
Quick Boot:  
[Enabled]  
Boot Time Diagnostic Screen:  
Boot Menu:  
Preboot Execution Environment:  
Boot Device Priority  
[Disabled]  
[Enabled]  
[Enabled]  
[Disabled]  
All diagnostic tests  
will be done.  
[Enabled]  
Some diagnostic tests  
may be skipped while  
booting to speed up.  
F1 Help  
ESC Exit  
Select Item -/Space Change Values  
Select Menu Enter  
Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 17. Boot Menu  
Table 17: Fields, Options and Defaults for the Boot Menu  
Menu Field  
Options  
Default  
Description  
Quick Boot:  
[Enabled]  
Turns on and off booting with a truncated set of Power On Self Tests. (Fewer  
tests mean faster booting.)  
• Disabled  
• Enabled  
Boot Time  
Diagnostic Screen:  
[Disabled]  
[Enabled]  
[Enabled]  
__  
Turns on and off display of test results instead of Fujitsu logo screen during  
Power On Self Test.  
• Disabled  
• Enabled  
Boot Menu:  
When disabled, the [F12] key cannot be used to invoke the Boot menu. When  
enabled, click the [F12] button to display the Boot menu while booting up.  
• Disabled  
• Enabled  
Preboot Execution  
Environment:  
Turns on and off boot from network server options.  
• Disabled  
• Enabled  
Boot Device  
Priority:  
Selects Boot  
Device Priority  
submenu  
This menu allows setting up the source for the operating system. See “Boot  
Device Priority Submenu” in the following section. Pressing the [F12] key will  
also let you choose the boot device.  
25  
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
Boot Device Priority Submenu of the Boot Menu  
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.  
Be aware of the operating environment when booting from a CD or you may overwrite files by mistake.  
A bootable CD-ROM has either a floppy disk or a hard drive format. When a bootable CD-ROM is used,  
drive allocations change automatically without changing the BIOS setup. If floppy disk format is used, the  
CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard  
drive is not present or is disabled. A bootable CD-ROM cannot use a C: designation if a formatted internal  
hard drive is present since the C: designator is always reserved for the internal hard drive.The boot  
sequence ignores new drive designations, but your application software will use the new designations.  
In order for a portable USB memory device (e.g., JumpDrive or memory stick) to be recognized in the Boot  
Device Priority list, it must have been installed before booting the system.  
Note that some older portable USB memory devices may not be recognized as bootable devices.  
The Boot Menu can also be invoked outside of the Setup Utility using the TrustedCore menu or the [F12]  
key. (See Using the TrustedCore Menu on page 2 for more information)  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Boot Device Priority  
Item Specific Help  
Boot priority order:  
Keys used to view or  
configure devices:  
1:  
2:  
3:  
4:  
5:  
6:  
7:  
8:  
Floppy Disk Drive  
Drive0: FUJITSU MHV2100BH PL  
Drive1: None  
CD/DVD Drive  
NETWORK: B02 D00 Yukon PXE  
<+>/<Space> or <->  
moves the device up or  
down.  
<x> exclude or include  
the device to boot.  
Excluded from boot order:  
:
:
USB MEMORY: None  
USB HDD: None  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 18. Boot Device Priority Submenu  
26  
 
B o o t M e n u  
Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu  
Menu Field  
Description  
Boot priority order:  
1: Floppy Disk Drive  
2: Drive0:  
The boot selections determine the order in which the BIOS searches for the operating system during a  
startup sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and  
then press the [+] or [-] key to change the order number. Tapping [x] removes from the list a device that is  
not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot priority list. Be sure to  
save your changed order when you exit the BIOS setup utility.  
3: Drive1:  
4: CD/DVD Drive  
5: NETWORK:  
6:  
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be  
overwritten, depending upon your operating environment.  
7:  
8:  
Excluded from boot order:  
: USB MEMORY:  
: USB HDD:  
Exiting from Boot Menu  
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or  
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish  
to move to another menu, use the cursor keys.  
27  
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
INFO MENU – DISPLAYS BASIC SYSTEM INFORMATION  
The Info menu is a display only screens that provides the  
configuration information for your notebook.  
those fields. These fields are for information purposes  
only, and are not editable.  
The following table shows the names of the menu fields  
for the Info menu and the information displayed in  
The information, including CPU type and  
speed, and total memory, displayed on this  
screen varies according to the unit you  
purchased.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
BIOS Version:  
BIOS Date:  
1.04  
01/26/2007  
BIOS Area:  
E000h - FFFFh  
CPU Type:  
L1 Cache:  
L2 Cache:  
AMD Turion(tm) 64 X2 Mobile Technology TL-52  
128 KB  
1024 KB  
Total Memory:  
1024 MB  
Memory Slot 1: None  
Memory Slot 2: 1024 MB DDR2 SDRAM  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9  
Setup Defaults  
F10 Save and Exit  
Figure 19. Info Menu  
Table 19: Fields, Options and Defaults for the Info Menu  
Note that the parameters listed in the following table may be different, depending upon your system configuration.  
Menu Field  
Default  
Menu Field  
Default  
BIOS Version:  
X.XX  
L2 Cache:  
1024 KB  
1024 MB  
None  
BIOS Date:  
BIOS Area:  
CPU Type:  
XX/XX/XXXX  
E000h – FFFFh  
Total Memory:  
Memory Slot 1:  
Memory Slot 2:  
AMD Turion(tm) 64 X2  
1024 MB DDR2 SDRAM  
Mobile Technology TL-52  
L1 Cache:  
128 KB  
28  
 
I n f o M e n u  
EXIT MENU – LEAVING THE SETUP UTILITY  
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to  
make any changes. (See Navigating through the Setup Utility on page 2 for more information). The following table shows  
the names of the menu fields for the Exit menu, the default settings and a description of the field's function and any  
special information needed to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Exit  
Item Specific Help  
Exit Saving Changes  
Exit Discarding Changes  
Load Setup Defaults  
Discard Changes  
Save Changes  
Save Changes and Power Off  
Exit System Setup and  
save your changes to  
CMOS.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9  
Setup Defaults  
F10 Save and Exit  
Figure 20. Exit Menu  
Table 20: Fields, Options and Defaults for the Exit Menu  
Menu Field  
Description  
Exit Saving  
Changes  
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory  
and then exit the setup utility. A confirmation message Save Configuration changes and exit  
now? [Yes] [No] will be displayed.  
Exit Discarding  
Changes  
Selecting Exit Discarding Changes and Exit will exit the setup utility without writing to the BIOS memory.  
When the BIOS recognizes this selection it will load the operating system and begin operation.  
Load Setup  
Defaults  
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the  
message Load default configuration now? [Yes] [No]. When confirmed the setup utility will  
return to the Exit Menu. To return to another menu follow the directions in the Navigating Through the  
Setup Utility Section.  
29  
 
L i f e B o o k  
S
S e r i e s N o t e b o o k  
Table 20: Fields, Options and Defaults for the Exit Menu  
Menu Field  
Description  
Discard  
Changes  
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message  
Load previous configuration now? [Yes] [No] will be displayed. When confirmed the utility  
will return to the Exit menu. To return to another menu, follow the directions in the Navigating Through the  
Setup Utility Section.  
Save Changes  
Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory. The message  
Save configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup  
utility will return to the Exit menu. To go to another menu, follow the directions in the Navigating Through  
the Setup Utility section.  
Save Changes  
and Power Off  
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS  
memory, then power the system off. The message Save configuration changes now and power  
off? [Yes] [No] will be displayed. When confirmed, the setup utility shut down the system.  
30  
 

Eagle Electronics Fish Finder 502cDF User Manual
Echo Bear Cat Chipper SC5670B 75524 User Manual
Firstech LLC Two Way Radio 2W900FMR 2ND 5P User Manual
Fisher Price Motorized Toy Car B1501 User Manual
FujiFilm Welding System QP242 User Manual
Furuno SONAR CSH 23 24 User Manual
Galileo Printer TCP IP Print Server User Manual
GE Air Conditioner AZ75E12DAC User Manual
GE Dishwasher 712M User Manual
GE Network Router PB3 POS RP User Manual