SPF200-USB Fingerprint Sensor
(Back view)
(Front view)
Features
•
•
•
•
All-in-one Fingerprint module with USB connector.
Easy to integrate with other devices
Uses Fujitsu MBF200 Fingerprint Sensor
Low Power
•
•
•
•
•
•
•
500 DPI resolution
8-bit grayscale (256 gray levels)
On board A/D Converter
Programmable gain control for image optimization
12.8mm x 15mm image area
– 18 milliamps: Operating
– 500 microamps: Standby
Lead-Free and ROHS compliant parts available
Windows XP USB signed drivers
•
•
USB 1.1 compatible (to 13 FPS)
256 x 300 Pixel Array (50 µm pixel pitch)
Description
Users will no longer be required to remember and enter
The Fujitsu SPF200-USB is an all-in-one USB device. Simply
connect it to your USB cable and you have a working fingerprint
sensor! The SPF200-USB is ideal for integrating into devices
where USB is the communication interface such as computer
peripherals and embedded applications. Mount the SPF200-
USB into your device and you have a completed product
without going through the expense of board layout and debug.
cumbersome passwords or PIN codes. Fingerprint authentication
provides a reliable, quick and user friendly alternative to
passwords. The SPF200-USB fingerprint sensor has the USB 1.1
controller logic built right into the sensor, no external hardware is
required. Merely plug the sensor into the USB cable, the power
and data communications is managed by the USB protocol.
|