Frigidaire Yard Vacuum FRA08EHTI User Manual

Home Comfort  
Through-The-Wall  
Air Conditionerꢀ/ꢀHeater  
FRA08EHT1  
Product Dimensions  
Height  
Width  
Depth  
14-1/2"  
24"  
20-1/2"  
More Easy-To-Use Features  
Effortless™ Clean Filter  
Our antibacterial filter reduces bacteria,  
room odors and other airborne particles  
for a cool, comfortable environment.  
Multi-Speed Fan  
Features three different fan speeds, for  
more cooling flexibility.  
Sleep Mode  
Quiet operation keeps you cool without  
keeping you awake. Plus, Sleep Mode  
gradually increases room temperature  
after being activated.  
Quickly Cools  
Quickly cool a room on hot days.  
Comfort Control Design  
Easily control the direction of your cool air,  
wherever your unit is.  
Effortless™ Restart  
Automatically resumes operating at its  
previous settings when power is restored  
to your unit.  
Clean Filter Alert  
Notifies you when your filter needs to be  
cleaned.  
Power Cord  
Comes with an extra long three-prong  
cord that makes extension cords  
unnecessary.  
Signature Features  
Effortless™ Temperature  
Control  
Our air conditioners maintain the preset  
room temperature, so you will remain  
comfortable at all times.  
Ready-Select® Controls  
Easily select options with the touch of a  
button.  
SpaceWise® Adjustable Design  
Optional Side Panels  
Extend so you can adjust your unit to fit  
your window.  
24-Hour On/Off Timer  
Keep things cool on your schedule.  
Performance  
BTUs  
Supplemental Heat Only  
Our versatile unit offers a supplemental  
heating capability, providing you with an  
additional heat source when needed.  
Remote Control  
Allows you to precisely control the  
temperature and fan speed from across  
the room.  
Cool  
Heat  
8,000  
4,200  
frigidaire.com  
 
Home Comfort  
FRA08EHT1  
Through-The-Wall Air Conditionerꢀ/ꢀHeater  
Plug Type (NEMA)  
5-15P  
Home Comfort Specifications  
Replacement Installation  
Product Shipping Weight (approx.) – 73 Lbs.  
When replacing existing air conditioner with new unit, refer to  
Product Installation Guide on web to identify existing wall-sleeve  
manufacturer and size compatibility. If proper installation and slope  
are suspect, then correct installation of Frigidaire® Through-The-Wall  
18" Sleeve Kit PNꢀ#EA108T recommended.  
An electrical supply with grounded three-prong receptacle is  
required. The power supply circuit must be installed in accordance  
with current edition of National Electrical Code (ANSI/NFPA 70)  
and local codes & ordinances.  
Use of existing wall sleeve to mount new unit requires original sleeve  
be in sound structural condition with rear grille that attaches securely,  
or rear flange that serves as stop for unit.  
Preferable installation option, for increased efficiency and possibility  
of drafts reduced, requires existing rear grille (mounted to sleeve) be  
replaced with new unit’s rear air-directional louvered grille (provided  
in accessory kit, shipped with unit). Non-preferable installation option  
of directly mounting rear louvered grille to unit can be considered,  
requiring grille be mounted to unit prior to sleeve installation.  
Existing decorative exterior grille may be left in place, provided that  
proper air-directional rear louvered grille is installed.  
For installation into larger existing sleeve, optional Trim Kit  
PNꢀ# EA120T available.  
Voltage Rating – 115Vꢀ/ꢀ60 Hzꢀ/ꢀ15 Amps  
Amps @ 115 Volts = (Cool) 8 Ampsꢀ/ꢀ(Heat) 11.6 Amps  
Recommended Circuit Breaker – 15 Amps  
Unit equipped with 115V 3-wire power supply cord, NEMA plug type  
5-15P, approximately 72" long.  
Unit’s increased performance characteristics result from two rear  
intakes. For unit to operate at maximum efficiency, carefully follow  
complete, detailed new or replacement installation instructions  
provided in Product Installation Guide on web.  
Unit requires rearward slope when installation is complete, to allow  
condensate to drain from rear of sleeve.  
New Installation  
Note: For planning purposes only. Refer to Product Installation Guide  
on the web at frigidaire.com for detailed instructions.  
For new installation, Frigidaire® Through-The-Wall 18" Sleeve Kit  
PNꢀ#EA108T available. Recommended for proper installation.  
Through-the-wall installation requires 18" maximum wall thickness.  
Optional Accessories  
For energy-saving purposes, install unit in shady location, preferably  
a northern exposure; and do not block airflow inside with blinds,  
curtains or furniture; or outside with shrubs, enclosures or other  
buildings.  
Through-The-Wall 18" Sleeve Kit – (PNꢀ# EA108T).  
Trim Kit (for larger existing sleeve) – (PNꢀ# EA120T).  
Architectural-Style Exterior Louvered Grille – (PNꢀ# EA109T).  
USA 10200 David Taylor Drive Charlotte, NC 28262 1-800-FRIGIDAIRE frigidaire.com  
Specifications  
subject to change.  
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 frigidaire.ca  
FRA08EHT1 04/11 © 2011 Electrolux Home Products, Inc.  
Printed in the U.S.A.  
 

Dynex Switch DX HUB23 User Manual
Dyson Vacuum Cleaner DC 23 User Manual
Edelbrock Automobile Accessories 262 400 User Manual
Edimax Technology Network Card Wireless LAN USB Adapter User Manual
Electro Voice Microphone PL24 User Manual
Escort Radar Detector 8500CI User Manual
Excalibur electronic Home Safety Product H623 User Manual
Gardena Water Pump 5000 S User Manual
Geemarc Telephone MAYFAIR User Manual
Global Machinery Company Drill GTX1850K User Manual