Festool Sander RS2E User Manual

The sander for large, flat  
surfaces and style, rail  
and panel components  
RS2E  
½ sheet orbital sander  
Item No. 567 669  
The orbital sander was invented by Festool and  
the RS2E is the hidden champion of our line of  
sanders. The RS2E is a ½ sheet orbital sander  
with a fine, 2.5mm stroke and a real workhorse.  
Unfortunately ½ sheet sanders have become  
more and more unpopular in recent years in the woodworking industry. They have been  
replaced by the widely used random orbital sander.  
Though random orbital sanders have a number of advantages, you can’t beat ½ sheet  
sanders for smoothing out and finishing large, flat surfaces. Since a good ½ sheet sander  
produces a nearly perfect, flat plane there is no worry about dips or gouges showing up  
after finish dries.  
The Festool RS2E ½ sheet orbital sander sets the standard, and has been the workhorse  
and most used sander in thousands of cabinet shops all over the world for a long time.  
It's weight works to it's advantage, favoring a perfect finish. All you need to do is gently  
guide it along. The sander does all of the work, no pressure required. The almost  
vibration-free design glides along the surface producing a natural patina even before the  
finish is applied.  
The large pad of the RS2E is also ideal for rail, style and panel components where a round  
pad might leave an undesirable depression along the edge. It is perfect for edge sanding  
when you want to maintain crisp lines.  
Another advantage of the RS2E sander is that even an unskilled helper can do an excellent  
job with the RS2E sander, while using a random orbital sander takes a lot more practice to  
achieve a good result without dips and gouges.  
It is important to have the right sander for the job, not just any sander. The right sander  
will make sanding a lot more enjoyable and the results perfect.  
Think about this when you are in the market for your next sander.  
Ask your Festool dealer to help you choose the right sander  
AVAILABLE THROUGH:  
Your Festool dealer, or  
or call Festool.  
Festool USA/Tooltechnic Systems, LLC  
140 Los Carneros Way, Goleta, CA 93117  
Phone: 888.337.8600 • Fax: 888.550.6425  
 

Eagle Electronics Impact Driver EGA200 User Manual
Edimax Technology Network Router EW 7205APS User Manual
Festool Biscuit Joiner PD574447 User Manual
Field Controls Humidifier z100 User Manual
Firstech LLC Remote Starter CM6200 User Manual
Friedrich Heat Pump 920 087 09 User Manual
FujiFilm Digital Camera Z200fd User Manual
Garland Convection Oven SUMG 100 GAS User Manual
GE Gas Grill ZGG420LCPSS User Manual
Glowworm Lighting Water Heater 200 I User Manual