A
B
C
Operating Instructions
Mode d’emploi
Instrucciones de funcionamiento
Model/ Modèle/ Modelo:
PB 300
PB 400
PB 500
Using the Binding Machine
Adjustable Depth Setter
Punching Holes (PB 300 Only)
Follow steps 2-6 for PB 400/500 Punching Holes
instructions.
(PB 400/ 500 only)
The margin you want for your document depends on its
contents and ultimate thickness. The PB 400/500 makes
selecting margin depth easy with its unique margin depth
setter. To use:
1. After choosing the appropriate comb diameter size,
adjust the margin depth setting to correspond.
NOTE: The number on the margin dial should
correspond to the arrow on the cover.
2. Setting Guide:
Determining Comb Size
1. To select the appropriate comb for binding, insert
complete document under “leg” of adjustable comb
guide selector located on the bottom right side.
NOTE: Entire document should fit securely under “leg”
to determine true comb size.
2. Read the corresponding comb size from the center of
the adjustable comb guide selector.
3. Raise adjustable comb guide selector to release entire
document.
Position 1: 1/8
Position 2: 5/8
Position 3: to 2
"
"
to 1/2
"
(3.2 to 12.7 mm)
to 3/4" (15.9 to 19.1 mm)
1"
"
(25.4 to 50.8 mm)
Setting the Binding Lock Dial
(PB 400/ 500 Only)
Punching Holes (PB 400/ 500 only)
A unique feature of the Fellowes Binding Machine allows
you to punch various size documents by using the
disengagable punching dies.
The PB 400/500 is equipped with a unique binding lock
which is useful when multiple documents with the same
comb diameter need to be bound. To use:
1. Open the plastic comb to the required position by
using the binding handle.
Document Size
# of Holes
19 holes
Letter/Oversized Covers
2. Turn the dial (located on the right side of the
machine) in a clockwise rotation until it tightens. The
binding mechanism will now stop in the same preset
position automatically.
A4
Legal
21 holes
24 holes
1. Set the machine to document size using the above
chart. Disengage, or pull up metal pins for unwanted
holes. It is recommended that you disengage from the
right side of the machine allowing you to use the
ruler by the margin guide.
3. Re-adjust binding lock when changing comb size.
Binding The Document
1. Insert the plastic comb behind metal rakes on top of
the machine. Be sure the open side of the plastic
comb’s teeth are facing upward.
2. Holes should always be centered between the top
and bottom of paper edge. To center hole, set the
adjustable margin guide for oversized covers
(8-3/4”x11-1/4” • 222mm x 285mm), letter size
documents (8-1/2”x11” • 216mm x 279mm), or
legal size documents (8-1/2”x14” • 216mm x
357mm). For optimum results, first use several
“practice sheets” to set up margin guide position.
3. Insert all sheets into the punching area. NOTE: a
maximum of 20 sheets can be punched at a time.
4. Lower the handle to punch holes in paper.
5. Return handle to its original vertical position and
remove sheets.
A
B
C
2. To open comb, pull the binding handle toward self.
3. Insert the punched sheets into the open comb. (For a
correctly bound presentation, the first page of your
document should be the first one placed onto the
comb).
4. To close comb, return the binding handle to its
original vertical starting position, away from self.
5. To remove bound document lift upward.
Emptying Paper Clippings
To remove, simply pull the waste paper drawer out. Its
oversized design means emptying less frequently.
6. Repeat until all sheets and covers have been punched.
3
Specifications
PB 300
14 inches
(340mm)
450 sheets
PB 400
14 inches
(340mm)
450 sheets
PB 500
14 inches
(340mm)
450 sheets
Maximum binding length
Maximum binding capacity
Maximum punching capacity
(at a time)
20 sheets
20 sheets
20 sheets
Maximum binding diameter
2 inches
(51mm)
19
2 inches
(51mm)
24
2 inches
(51mm)
24
Number of punches
(disengagable)
187/8" x 181/8" x 97/8"
(480 x 460 x 250mm)
42 lbs.
(disengagable)
187/8" x 181/8" x 97/8"
(480 x 460 x 250mm)
48 lbs.
Dimensions
(L x W x H)
Weight
187/8" x 181/8" x 97/8"
(480 x 460 x 250mm)
37.5 lbs.
(17 kg)
(19 kg)
(22 kg)
Warranty
1 year
1 year
1 year
Limited Warranty
Fellowes Manufacturing Company warrants all Binding Machines to be free from defects in material and
workmanship for one year from the date of purchase by the original consumer. The exception to this are the
punching dies which are subject to wear. If any part is found to be defective during the warrant period, your
sole and exclusive remedy will be repair or replacement, at Fellowes' option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY,
INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN
DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for
any consequential or incidental damages attributable to this product. This warranty gives you specific legal
rights. You may have other legal rights that vary from state to state.
A
B
C
For more detail or to obtain service under this warranty, please contact Fellowes Customer Service at 1-800-
955-0959, Monday through Friday, 8 AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on machines purchased outside the USA,
contact the appropriate location listed on the back of this instruction manual.
Warrantor: Fellowes Manufacturing Company
4
Contact For Service
Vos Contacts Fellowes
Sus Contactos Fellowes
United States
Australia
1-800-955-0959
(In Melbourne) (03) 9330-3211
(Outside Melbourne) 1-800-331-177
1-800-665-4339
Canada
United Kingdom
Japan
Benelux
Italy
Germany
France
01302-885 331
+81-3-5496-2401
+31-(0)347-377988
+39-071730041
+49-5131-49770
A
B
C
+33-(0)4-72-08-25-45
®
1789 Norwood Avenue, Itasca, Illinois 60143-1095 630-893-1600 Customer Service 1-800-945-4545 http://www.fellowes.com
Australia
Benelux
Canada
France
Germany
Italy
Japan
Poland
United Kingdom
Tullamarine, Vic Vianen, NL
Markham, Ont. Rennes, I-V
Garbsen, Han.
Camerano, AN Tokyo
Warsaw
Doncaster, S. Yorks.
© 2000 Fellowes Printed in U.S.A.
|