HPT64
Constant-Directivity
Supertweeter Horn
General Product Description
The Electro-Voice® model HPT64 is a wide-range, flat-
front, constant-directivity super-tweeter horn. Both
horizontal and vertical angles are controlled from 3 kHz
to 20 kHz with unusual precision and adherence to the
intended angle. Furthermore, excellent loading is
maintained to 1,600 Hz. The flat-front design makes
the HPT64 suitable for all modern boxed and clustered
systems.
Architects’ and Engineers’ Specifications
The horn shall be of the constant-directivity type.It shall
produce a horizontal beamwidth (6-dB-down angle) of
60 degrees, deviating no more than 20 degrees from
this angle over the frequency range 3 kHz to 20 kHz. It
shall produce a vertical beamwidth of 40 degrees,
deviating no more than 20 degrees from this angle over
the frequency range 3 kHz to 20 kHz. In addition, it
shall provide useful acoustic loading at all frequencies
above 1.6 kHz.
laminated into the fiberglass portion of the horn.
The horn shall possess a throat of 2.36 cm (0.93in.)
diameter and shall be provided with a 1-3/8"-18
threaded hole for the mounting of a compression driver.
The horn shall be 13.3 cm (5.3 in.) high, 13.3 cm (5.3
in.) wide, and 10.4 cm (4.1 in.) long. It shall weigh no
more than 1.8 kg (4.0 lb).
The horn shall be of hybrid fiberglass-and-zinc
construction. The initial throat section shall be
constructed of die-cast zinc and shall be integrally
The horn shall be the Electro-Voice model HPT64
constant-directivity horn.
Specifications:
The following specifications are in accordance with or
exceed the AES Recommended Practice for
Specification of Loudspeaker Components Used in
Professional Audio and Sound Reinforcement
(AES2-1984; ANSI S4.26-1984).
Construction:
Polyester resin and glass-fiber laminate integrally
molded to a die-cast zinc throat section. This hybrid
construction assures a rigid driver mount, accurate,
loss-free throat-wave transmission and low total weight
compared to horns of similar size.
Horizontal Beamwidth:
60° (+20°, -10°) - (-6 dB 3 kHz to 20 kHz)
Vertical Beamwidth:
Mechanical Connection of Driver:
1-3/8"-18 thread allows the attachment of the DH2010A
or DH2T drivers
40° (+20°, -10°) - (-6 dB, 4 kHz to 20 kHz)
Directivity Factor Rθ (Q):
Recommended Driver:
DH2010A or DH2T
Weight:
15.8 (average 3 kHz to 20 kHz)
Directivity Index Di:
1.8 kg (4.0 lb)
12.0 dB (+1.2, -1.6 dB)
10 log Rθ, (average 3 kHz to 20 kHz)
Lowest Recommended Crossover Frequency:
1.6 kHz
|