PL44
Dynamic Supercardioid
Vocal Microphone
Key Features:
•
•
•
•
•
•
Sonic voicing for transparency and high-mid lift
Plug-and-play placement of vocals in any mix
Supercardioid polar pattern
Powerful Neodymium magnet structure
Shock mounted capsule and low handling noise
Fine mesh Memraflex™ grille
General Description:
Thank you for purchasing the Electro-Voice® PL44. This product is
a professional-grade supercardioid dynamic microphone designed
for plug-and-play placement of vocals in any mix. The PL44’s high-
mid frequency content design lifts the vocal into the precise spot in
the mix where they need to be, resulting in fast and effective vocal
placement. With its extremely accurate frequency response, the
PL44’s sonic performance is robust and articulate delivering highly
detailed imaging across the critical vocal frequency range. The
enhanced isolation provided by its supercardioid polar pattern is
an excellent defense against system feedback and cross-talk bleed
emanating from other nearby sound sources. The result is higher
gain before feedback and cleaner stage mixes. Although designed
to be a vocal microphone for music and spoken word, the PL44 will
also function well as an instrument or amplifier microphone where a
dynamic element capsule would be desired.
Technical Specifications:
Element Type: Dynamic, Neodymium Magnet
Structure
Frequency Response: 80 Hz - 18,000 Hz
Polar Pattern: Supercardioid
Application Notes:
As with most directional microphones, the low frequency response
of the PL44 microphone varies with the distance from the sound
source. Known as “proximity effect”, the bass response of the
microphone increases as the working distance to the microphone is
reduced. This “bass boost” is only audible when working at distances
closer than 6 inches. Using this microphone at distances greater
than 6 inches provides minimal coloration from proximity effect.
Sensitivity, Open Circuit 2.2 mV/Pa (-53 dBV)
Voltage, 1 kHz:
Polarity: Positive pressure on diaphragm
produces positive voltage on pin 2
relative to pin 3
Rated Impedance: 600 ohms
Microphone Connector: 3-pin, XLR-type
Proximity effect can be used to your advantage when a thin voice
is being recorded. As the vocalist decreases their working distance
to the microphone, the low frequency content is enhanced. Close-
up positioning of the microphone will also reduce the potential for
feedback from the sound reinforcement system. When close-talked,
the bass-boost provides an increase in overall microphone output
level. The mixer gain may be proportionately reduced, resulting in
a reduction of the system’s sensitivity to feedback caused by the
sound entering the microphone from the loudspeakers.
Finish: Textured black satin handle with
MemraflexTM grille
Dimensions: Length = 7.33” (186.2 mm)
Width = 2.00” (50.7 mm)
Shank = 0.93” (23.6 mm)
Accessories Included: Stand adapter with Euro-thread
insert, Soft zippered gig bag
Net Weight: 10.0 oz (282 g)
Shipping Weight: 18.9 oz (536 g)
Warranty:
This Electro-Voice® PL44 product is guaranteed against malfunction
due to defects in materials or workmanship for a period of three (3)
years from the date of original purchase. Please refer to the Limited
Warranty card included with your product for further warranty infor-
mation.
|