EVU-2062/95
Dual 6.5” Two-Way
90° x 50° Full-Range
Loudspeaker System
Key Features:
•
1.3” (33 mm) diaphragm, 1.4” (36 mm) exit pure
titanium compression driver
•
•
Dual 6.5” (165 mm) LF transducers
Advanced third-order crossover network with
HF protection
•
Coverage pattern: 90° x 50° Constant
DirectivityTM rotatable waveguide
•
•
•
•
•
•
94 dB sensitivity, 125 dB maximum SPL
System rating: 300 W continuous, 1200 W peak
Universal U-bracket included
70.7/100-V transformer accessory optional
NL4 cover plate accessory optional
(6) M8 threaded suspension points
General Description:
Technical Specifications:
The Electro-Voice EVU-2062/95 is a compact two-way loudspeaker
system that can be used in a variety of applications where high qual-
ity sound reinforcement is required in an ultra-compact lightweight
enclosure. The enclosure design utilizes asymmetric angles to
maintain tight clearances to wall and ceilings while providing optimal
coverage patterns making it ideal to blend into surroundings. This
design was optimized for wall, stage lip and under balcony applica-
tions.
Freq. Response1 (-3 dB): 100 Hz - 16 kHz
Freq. Range1 (-10 dB): 70 Hz - 20 kHz
Rotatable Coverage: 90° x 50°
Rec. High-Pass Frequency: 90 Hz
Passive Crossover Freq.: 2400 Hz
Axial Sensitivity1: 94 dB (1 W/1 m)
Max. Calculated SPL1: 125 dB
Passive Power Handling2: 300 W continuous, 1200 W peak
Impedance: 8 ohms (nominal), 6.0 ohms (min.)
LF Transducers: Dual ICT-6.5-16, 6.5” (165mm) drivers
The EVU-2062/95 incorporates the ICT-1-8, a high-output 1.3” dia-
phragm titanium compression driver coupled to a Constant Direc-
tivity™ 90° x 50° rotatable waveguide. The ICT-6.5-16 woofer was
developed using FEA optimization to provide the highest sensitivity
while achieving the highest level of speech intelligibility. The cross-
over design uses 18-dB-per-octave slopes with equalization for very
smooth response in the vocal range, linear off-axis response and a
protection circuit for long term reliability.
HF Transducer: ICT-1-8, 1.3” (33mm) diaphragm
compression driver
Connectors: Single four-pin 12 AWG Phoenix/Euro
Block screw-terminals
Enclosure: 9-ply hardwood plywood with
textured paint
Grille: 18 GA steel with cloth
Environmental: IEC 60529
Suspension: (6) M8 threaded suspension points
Dimensions 8.21” x 20.98” x 8.14”
(H x W x D): (208.4 mm x 532.9 mm x 206.7 mm)
Net Weight: 25.0 lb (11.3 kg)
Shipping Weight: 31.2 lb (14.2 kg)
The EVU series is constructed of 9-ply hardwood plywood enclo-
sures with six integral M8 suspension points to support a wide va-
riety of mounting positions. The EVU system is finished in textured
paint, available in either white or black. Each EVU system includes
a universal U-bracket to facilitate mounting. The U-bracket provides
full unobstructed rotation of the loudspeaker (330° unobstructed ro-
tation if the transformer kit is installed). Additional mounting points
are located on the rear of the enclosure for use with an Omnimount™
type bracket. An available 70.7/100-V transformer kit may be easily
mounted over the input panel for use in distributed systems. All of
these features give you the flexibility to address a large range of
venues, while quickly and precisely supporting customer require-
ments.
1 Half-space measurement.
2 EIA RS-426A, tested for eight hours.
Engineering Data Sheet
Polar Plots (1/3 Octave):
400 Hz
500 Hz
1.25 KHz
3.15 KHz
8 KHz
630 Hz
800 Hz
1 KHz
2.5 KHz
6.3 KHz
16 KHz
1.6 KHz
2 KHz
4 KHz
5 KHz
10 KHz
12.5 KHz
20 KHz
Horizontal = Black
Vertical = Grey
Dimension Drawings:
Front View
Side View
Rear View
Top / Bottom View
EVU Series Part Numbers
• EVU-1062/95-BLK, 90° x 50°, black finish
• EVU-1062/95-WHT, 90° x 50°, white finish
• EVU-2062/95-BLK, 90° x 50°, black finish
• EVU-2062/95-WHT, 90° x 50°, white finish
• EVU-1082/95-BLK, 90° x 50°, black finish
• EVU-1082/95-WHT, 90° x 50°, white finish
• EVU-2082/95-BLK, 90° x 50°, black finish
• EVU-2082/95-WHT, 90° x 50°, white finish
Performance Match
• EVA “S” Series, Full-Range Line-Array Modules
• EVA “D” Series, Subwoofer Line-Array Modules
• EVF “S” Series, Full-Range Loudspeakers and Subwoofers
• EVF “D” Series, Full-Range Loudspeakers and Subwoofers
• EVH “S” Series, Full-Range Coaxial Loudspeakers
• EVH “D” Series, Full-Range Coaxial Loudspeakers
• CPS2.4 MKII, power amplifier, 2 x 200W
• CPS2.6 MKII, power amplifier, 2 x 250W
• CPS4.5, power amplifier, 4 x 450W
• CPS8.5, power amplifier, 8 x 450W
Accessories
• EVU-TK60, 70V transformer, 60W
• EVU-CDNL4, cover plate, NL4
CAUTION
This EVU loudspeaker should be suspended overhead only in accordance with the procedures and limitations
specified in the EVU User Manual and possible manual update notices. This system should be suspended with
certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal
overhead suspension ordinances.
U.S.A. and Canada only. For customer orders, contact Customer Service at:
Electro-Voice
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
© Bosch Communications Systems
05/2011
For technical assistance, contact Technical Support at: 866/78AUDIO
Part Number F01U216886 Rev 3
Specifications subject to change without notice.
|